Database Info

i want to reset binary count

Dear all,
i had search all forums but i didnt get any proper information about resetting binary counter in samsung galaxy r
all we have to reset binary counter of s2 only
i only want how to reset binary counter of galaxy r
without making problem to my sgr
thanks in advance
Azhar

there is a sticky post in this android development for how to reset yellow triangle and binary count, u should search before posting a new topic.
u will need a USB JIG to do this, and follow the instruction in post.

azhar.munshi said:
Dear all,
i had search all forums but i didnt get any proper information about resetting binary counter in samsung galaxy r
all we have to reset binary counter of s2 only
i only want how to reset binary counter of galaxy r
without making problem to my sgr
thanks in advance
Azhar
Click to expand...
Click to collapse
I don't think you did it thoroughly
http://forum.xda-developers.com/showthread.php?t=1414053&highlight=usb+jig

but is getting for only s2 not r

What are you talking about? the tutorial I wrote is exclusively for SGR. In S2 is all about plugging USB jig (or sometimes re-flashing bootloader). USB jig works different way on SGR which is explained in guide.

m.kochan10 said:
What are you talking about? the tutorial I wrote is exclusively for SGR. In S2 is all about plugging USB jig (or sometimes re-flashing bootloader). USB jig works different way on SGR which is explained in guide.
Click to expand...
Click to collapse
i am saying that usb jig which are available in market is compatible for only s2

azhar.munshi said:
i am saying that usb jig which are available in market is compatible for only s2
Click to expand...
Click to collapse
USB JIG is same for the SGS II and SGR, resetting method is different for SGR.

Well I don't know what kind of jig is that...but usb jig works with the most of samsung android devices (even if sgr is not mentioned there). I've been using the same jig with my SGS2 and SGR. The way it works differs depended on device but it works in both cases.

azhar.munshi said:
i am saying that usb jig which are available in market is compatible for only s2
Click to expand...
Click to collapse
usb jig is nothing special but it is a resistor of 301 kohm, all usb jigs are same they dnt have any difference.

I have done the reset with a USB jig of s 2 without any issue. It's simple.
Switch off your mobile.plug the jig to your mobile. And restart. It will go to download mode automatically. Then unplug the jig and straight away connect the phone to your PC and flash the stock ROM. Done.
Sent from my GT-I9103 using XDA

ganucci said:
I have done the reset with a USB jig of s 2 without any issue. It's simple.
Switch off your mobile.plug the jig to your mobile. And restart. It will go to download mode automatically. Then unplug the jig and straight away connect the phone to your PC and flash the stock ROM. Done.
Sent from my GT-I9103 using XDA
Click to expand...
Click to collapse
U don't have to flash the whole FW. Stock kernel is enough !

mj.vikram said:
USB JIG is same for the SGS II and SGR, resetting method is different for SGR.
Click to expand...
Click to collapse
The problem is that since latest v2.3.6, the bootloader has locked access to the mmcblk0bootX partition. So that you can no longer reset the counter as you want. However I have another choice for him ....... just follow the guide here : http://forum.xda-developers.com/showthread.php?t=1528256 and makes sure you have done backing up /efs, otherwise you repaired phone is bricked
btw please try to flash 2.3.4 stock rom before if you really want to use the jig mode just to reset counter.

It depends what kind of Odin protocol (DM version) he has. If it's v. 2.0 then USB jig works like a charm (He can even flash XWLA4 - latest 2.3.6 I guess). I had flashed XWLA4, but my DM protocol hasn't changed -It remained as it originally was (2.0). Thus I hadn't any single issues with using USB jig whatsoever.
But I know there are users with Odin Protocol v. 2.1 and there USB jig is useless. And they must use the method you mentioned. Although there must be some easier way to bypass it. In SGS2 all you have to do is just flash the old bootloader and voila. In case of SGR u must go through all these scary steps.

m.kochan10 said:
It depends what kind of Odin protocol (DM version) he has. If it's v. 2.0 then USB jig works like a charm (He can even flash XWLA4 - latest 2.3.6 I guess). I had flashed XWLA4, but my DM protocol hasn't changed -It remained as it originally was (2.0). Thus I hadn't any single issues with using USB jig whatsoever.
But I know there are users with Odin Protocol v. 2.1 and there USB jig is useless. And they must use the method you mentioned. Although there must be some easier way to bypass it. In SGS2 all you have to do is just flash the old bootloader and voila. In case of SGR u must go through all these scary steps.
Click to expand...
Click to collapse
Yep my device is having odin protocol v2.1 as well and I cannot reset the counter as well (well I am prepared to use nvflash instead if anything occurs, and actually I should ask for the donation for getting a new phone just for development as well. Tbh, it is too dangerous to use a daily usage phone just for developement). It was brought in last month only. So you should make a note on the guide saying that if the odin protocol is v2.1, the USB jig reset method doesn't work @ all.
I can confirm that USB jig download mode does not work with odin protocol v2.1.
oh btw my binary counter has gone to 50 times now

UnknownzD said:
So you should make a note on the guide saying that if the odin protocol is v2.1, the USB jig reset method doesn't work @ all.
Click to expand...
Click to collapse
It's been there for a long long time, but I've made it even more clear now

m.kochan10 said:
U don't have to flash the whole FW. Stock kernel is enough !
Click to expand...
Click to collapse
oh yeah I didn't get my stock kernel so I flashed the stock ROM.....hehehe
Sent from my GT-I9103 using XDA

[Q] [HELP] Boot loop. Need help regarding PIT file

Hi all.
My note (GT-N8000 16GB version) stuck in boot loop and i can't access recovery mode, only download mode available. I'm doing some research regarding this and found that maybe the solution is by installing PIT file. I found pit file for my device in here : http://forum.xda-developers.com/showthread.php?p=41158546#post41158546
I know that installing wrong PIT file will bricked my device for real. So before I'm doing some flashing I want to ask some question here for confirmation:
1. Did the Russian pit file on above link work to all GT-N8000 16GB in every region? my region is XSE
2. How to install the PIT file? I read somewhere that I need to load it along with stock 4.0.4 ROM from my region and then tick repartition check box. Is that the correct way?
Please help. I'm noob here. I really need some guidance. thanks

I am having the same issue.Why will a PIT file will stop the bootloop?
My Tablet charges and charges while it remains in a loop between srarting and recovery....back and forth. It never boots to Andriod and never enters recovery. Like you I can use the start and volume up key to enter download mode but it does not download anything through Odin or Flasher. Any help will be a ggodsend.
Thanks Anybody.......I have be working on it for a month. I am out of ideas.

wiien said:
hi all.
My note (gt-n8000 16gb version) stuck in boot loop and i can't access recovery mode, only download mode available. I'm doing some research regarding this and found that maybe the solution is by installing pit file. I found pit file for my device in here : http://forum.xda-developers.com/showthread.php?p=41158546#post41158546
i know that installing wrong pit file will bricked my device for real. So before i'm doing some flashing i want to ask some question here for confirmation:
1. Did the russian pit file on above link work to all gt-n8000 16gb in every region? My region is xse
2. How to install the pit file? I read somewhere that i need to load it along with stock 4.0.4 rom from my region and then tick repartition check box. Is that the correct way?
Please help. I'm noob here. I really need some guidance. Thanks
Click to expand...
Click to collapse
joanno said:
my tablet charges and charges while it remains in a loop between srarting and recovery....back and forth. It never boots to andriod and never enters recovery. Like you i can use the start and volume up key to enter download mode but it does not download anything through odin or flasher. Any help will be a ggodsend.
Thanks anybody.......i have be working on it for a month. I am out of ideas.
Click to expand...
Click to collapse
is it rooted ?

joanno said:
My Tablet charges and charges while it remains in a loop between srarting and recovery....back and forth. It never boots to Andriod and never enters recovery. Like you I can use the start and volume up key to enter download mode but it does not download anything through Odin or Flasher. Any help will be a ggodsend.
Thanks Anybody.......I have be working on it for a month. I am out of ideas.
Click to expand...
Click to collapse
Same here :/ will try to bring to best buy to a Samsung support booth and see if they can help me it's very frustrating though

joanno said:
My Tablet charges and charges while it remains in a loop between srarting and recovery....back and forth. It never boots to Andriod and never enters recovery. Like you I can use the start and volume up key to enter download mode but it does not download anything through Odin or Flasher. Any help will be a ggodsend.
Thanks Anybody.......I have be working on it for a month. I am out of ideas.
Click to expand...
Click to collapse
I read it here http://forum.xda-developers.com/showthread.php?t=1133590
I haven't tried it yet because I'm afraid I'll make it worse
ameer3adel said:
is it rooted ?
Click to expand...
Click to collapse
Yep. why?
Jiggs82 said:
Same here :/ will try to bring to best buy to a Samsung support booth and see if they can help me it's very frustrating though
Click to expand...
Click to collapse
I had bring it to samsung support. They couldn't help. They said my EMMC was hit and I need to replace it. But the cost is so expensive! around $200, I'm afraid I can't afford it for now :crying:

wiien said:
I read it here http://forum.xda-developers.com/showthread.php?t=1133590
I haven't tried it yet because I'm afraid I'll make it worse
Yep. why?
I had bring it to samsung support. They couldn't help. They said my EMMC was hit and I need to replace it. But the cost is so expensive! around $200, I'm afraid I can't afford it for now :crying:
Click to expand...
Click to collapse
Hmm yeah thats crazy Samsung is well known for emmc issues on their devices and they were saying they would be a better fix for it but still nothing smh well I guess my $560 I spent for my tablet is down the drain guess I will never buy a Samsung tablet again I'll stick to Nexus tablets or even an iPad lol

Jiggs82 said:
Hmm yeah thats crazy Samsung is well known for emmc issues on their devices and they were saying they would be a better fix for it but still nothing smh well I guess my $560 I spent for my tablet is down the drain guess I will never buy a Samsung tablet again I'll stick to Nexus tablets or even an iPad lol
Click to expand...
Click to collapse
ha! I just know that a week ago when searching for solution. There's a lot report regarding emmc issue. Guess I'll never buy any samsung device anymore

wiien said:
ha! I just know that a week ago when searching for solution. There's a lot report regarding emmc issue. Guess I'll never buy any samsung device anymore
Click to expand...
Click to collapse
Lol yeah exactly

Help: tried to flash recovery N8000, failed

Hello, here a plea for help.
I tried to flash my stock N8000 via this post: https://forum.xda-developers.com/showthread.php?t=1957002
I did try this several times, but it never completed: see the attached screen shot of what happens.
Now the device no longer boots normally. It begins to boot, then hangs on the Samsung logo.
Can someone help me here, as the original post seems dead....
thanks.

Start by flashing stock rom through Odin .

JJEgan said:
Start by flashing stock rom through Odin .
Click to expand...
Click to collapse
Hello, and thanks for responding. Could you give me a hint/howto on where the standard ROM might be, and how to flash, or where to read up on that?
Sorry, a bit of a noob on this...
thanks.

Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin

JJEgan said:
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thanks. Am driving right now. I'll try this later this evening.
Sent from my SM-N920C using Tapatalk

JJEgan said:
Firmware Updato.com or sammobile.com
Hello, as the device no longer boots its difficult to tell exactly which device it is, as there are at least 4 devices that seem to fit my device description. I've got the N8000, from GErmany, i received it as part of a package from E-plus. From that information there are 4 device ROM's available....one as late as 2015. Which should i take?
thanks again.
Click to expand...
Click to collapse

Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.

Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected

Hello out there community...no one out there that can help me here? Please? ....
tjohnso1 said:
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Click to expand...
Click to collapse

JJEgan said:
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Click to expand...
Click to collapse
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!

tjohnso1 said:
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
Click to expand...
Click to collapse
Hello, sorry but i need some more help here please.
I've downloaded what i believe is the stock firmware for my device from updato.com: GT-N8000_EPL_1_20150303173500_n47626s3xd
This is a zipped package with two file in it:
N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar.md5
and
SS_DL.dll
I've put both of these files into the directory where ODIN is. I have downloaded and tried serveral ODIN versions: v1.85, v3.10.6, v3.12.7, v3.12.3, v3.07
None of them work. After loading the tar file, ODIN begins, then after about 3 seconds stops and show the message "fail".
Attached is a screen shot of ODIN once i've loaded the tar file, and one that shows after the fail.
I've also added a picture of my note 10.1 N8000 while in download mode.
Anyone can help me here?
thanks.

Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.

JJEgan said:
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
Click to expand...
Click to collapse
Hello, and thanks.
What you have described above is exactly what i am doing. Are you saying that the reason it does not work is because the bootloader is blocking it? If so, how do i get around this?
I would really like to "upgrade", rather than downgrade. But at the moment i cannot find any other firmwares for my device. A few years ago I saw several ones, but not anymore.
Do you have a suggestion of which firmware I should install, and where i can get this?
Again, thanks so much for your help! I really appreciate it.

Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .

JJEgan said:
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
Click to expand...
Click to collapse
Hello, i'm not sure what this means. Which version should i use? and how?

That one flashed through Odin and hopefully its a later bootloader

JJEgan said:
That one flashed through Odin and hopefully its a later bootloader
Click to expand...
Click to collapse
Hello,
i tried to flash N8000XXSDQA7, but it also failed. Similar to all the others that i've tried to flash. I must be doing something fundamentally wrong, as the fail happeds after only about 3 seconds.
Any help you can offer? Really appreciate it.
thanks

I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash

JJEgan said:
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
Click to expand...
Click to collapse
Ok, but what do i do if the bootloader is damaged? Can i fix it or flash it with another bootloader?
thanks.

Yes if you can get another bootloader .
Further steps are beyond my knowledge but have a look here .
https://www.google.co.uk/search?q=x...x-b&gfe_rd=cr&dcr=0&ei=he5VWrvpOOqstgeTsYaICA

Help with putting new firmware on S7

Hey guys i am very new to this and have done a lot of research and i'm in need of some help, I tried to put new firmware onto my Samsung S7 but it failed, long story short i can't get it to boot up normally now. I can put it into download mode and then the recovery mode.
In Download mode it says this
Product Name: SM-G930F
Current Binary: Samsung Official
System Status: Custom
FRP Lock: On
Secure Download: Enabled
Warranty Void: 0
In Recovery Mode it says
samsung/heroltexx/herolte
7.0/NRD90M/G930FXXU1DQJ1
No Support SINGLE - SKU
Supported API: 3
dm-Verity error ...
E: Failed to mount /system (Invalid Argument)
I have done this in the past and haven't had any issues with it, but no matter what i do i cant get it to boot up. I've tried the kies and smart switch to put the normal firmware back on but it says this device isn't supported and so it wont load it on. I have tried multiple firmwares from sammobile using AP,BL,CP and i did put in the CSC one also at some stage.
I hope this is enough information if i have missed anything please let me know, hopefully someone has some answers or suggestions. Thanks guys

Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly

First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.

*Detection* said:
Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly
Click to expand...
Click to collapse
Yeah i was using an older version but i downloaded the latest one and still no luck

Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
Have not tried this, will give it a shot and get back to you!

Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
No Luck, i tried what you said and this is what happens
https://imgur.com/a/QQGAn
Re-Partition was automatically ticked, should i try it again and have it un-ticked? or have i totally buggered it?

Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.

Cholek3 said:
Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.
Click to expand...
Click to collapse
Well im glad its alright haha, ill keep trying different things as you suggested! Hopefully i have some luck. Thank you

Okay bit of an update on what i have attempted - Still no luck at all,
Tried different Odin verisons
Tried multiple firmwares all downloaded from SamMobile & Correct country/carrier etc
The BL,CP and CSC all seem to work fine when i do them by themselves or seperately but i can never get AP to work, it always fails at Sys.img and doesn't go any further.. it always fails about 1/4 of the way through
Tried the PIT partition with and without re-partition clicked
Tried different cables and Ports
anyone have anymore suggestions or is it dead

Did you try using Smart Switch on pc and recover software that way?

Cholek3 said:
Did you try using Smart Switch on pc and recover software that way?
Click to expand...
Click to collapse
Yeah, it says device isn't supported.. when i click on emergency software recovery nothing shows up..

I have run out of options. Sorry.

Cholek3 said:
I have run out of options. Sorry.
Click to expand...
Click to collapse
No worries, ill keep trying and report back if i have any success

will91491 said:
Yeah i was using an older version but i downloaded the latest one and still no luck
Click to expand...
Click to collapse
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware

It could be the internal memory fault. That's why it stops at 1/4 each time.

*Detection* said:
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware
Click to expand...
Click to collapse
Yeah i know this much, have done it also

Cholek3 said:
It could be the internal memory fault. That's why it stops at 1/4 each time.
Click to expand...
Click to collapse
Might give it a shot at replacing it, its ****ed either way as far as i can see. I've worked on a lot of iPhone diodes/chips so hopefully i can do this one. Will report back in a few weeks

Tried a different PC?

*Detection* said:
Tried a different PC?
Click to expand...
Click to collapse
Thats what I suggested earlier on, but there seems to be loads of other threads recently, where people's phones fails at loading "system" in odin.

G930P Semi Bricked / Help

I have a Galaxy 7 G930P and i try to reset this phone for unlock a Google Account with Odin and other Boot Loader, but I bricked this phone and now only the phone restarts alone and does not turn up the system. I can put this phone in download mode and i need Help for Install all with the correct stock fimwares. Thanks and i hope fixed this...

billaboy said:
I have a Galaxy 7 G930P and i try to reset this phone for unlock a Google Account with Odin and other Boot Loader, but I bricked this phone and now only the phone restarts alone and does not turn up the system. I can put this phone in download mode and i need Help for Install all with the correct stock fimwares. Thanks and i hope fixed this...
Click to expand...
Click to collapse
Cannot help much if there is no details on what your phone bootloader/firmware versions were before flash, and what versions you were trying to flash.
If you were flashing a lower version of BL to your phone, you can flash your original firmware back to your phone.
If you were flashing a higher version of BL, you will need to find a new version of BL/firmware , such as the latest U firmware, to Odin into the phone..

billaboy said:
I have a Galaxy 7 G930P and i try to reset this phone for unlock a Google Account with Odin and other Boot Loader, but I bricked this phone and now only the phone restarts alone and does not turn up the system. I can put this phone in download mode and i need Help for Install all with the correct stock fimwares. Thanks and i hope fixed this...
Click to expand...
Click to collapse
yves31 said:
Cannot help much if there is no details on what your phone bootloader/firmware versions were before flash, and what versions you were trying to flash.
If you were flashing a lower version of BL to your phone, you can flash your original firmware back to your phone.
If you were flashing a higher version of BL, you will need to find a new version of BL/firmware , such as the latest U firmware, to Odin into the phone..
Click to expand...
Click to collapse
Read this thread
https://forum.xda-developers.com/sprint-galaxy-s7/help/bloat-free-firmware-930u-tried-t3428974
Since you mentioned a Google account, just make sure you know the user and password of the last working Google account on the phone. Sounds like you tried to flash a firmware with an older bootloader.
And if you don't know that info and were trying to carrier unlock it via some back door method, don't follow the thread that I just linked.

semi-bricked
this happened to me as well. dont have access to this device since november. flashing the phone with official samsung firmware doesnt seem to work either,cant boot into recovery

TormentedHeart said:
this happened to me as well. dont have access to this device since november. flashing the phone with official samsung firmware doesnt seem to work either,cant boot into recovery
Click to expand...
Click to collapse
Can you get into download mode? Power + home + volume down?

lvpre said:
Can you get into download mode? Power + home + volume down?
Click to expand...
Click to collapse
yes i can. flashing stock firmware doesnt seem to fix the probelm either

TormentedHeart said:
yes i can. flashing stock firmware doesnt seem to fix the probelm either
Click to expand...
Click to collapse
Do you receive an error message when flashing? Also, have you tried another USB cable and make sure you use an usb 2.0 port too.

lvpre said:
Do you receive an error message when flashing? Also, have you tried another USB cable and make sure you use an usb 2.0 port too.
Click to expand...
Click to collapse
no error message it flashes successfully with odin but when the phone itself starts to update the firmware after 33% it just reboots then fails. then i get a error screen and well no recovery. no one locally seemed to be able to fix the issue either so update: i sent it away to try to fix. https://imgur.com/a/knxKIKM