My service keeps disconnecting on my brand new phone...
i5 . minus . com / ib04nW6xTCL7ff . png
This is getting really annoying, I know I can fix it with enabling and disabling flight mode / rebooting device. But I want it to work the entire time without needing to do that...
PLEASE help me out!
Hello everyone!
I've been Googling for quite a while now but with no results, so I created an account here to see if any of you guys could perhaps help me!
I have this SmartWatch 2 which resets itself continuously as long as it has a Bluetooth connection. The phone its connect to is a Samsung Galaxy S3.
The screen goes dark and a progress bar appears which then leads to the Sony splash-screen, and then turns it back on.
As soon as I disable the Bluetooth connection the watch boots up just fine without any continuous hassle.
The watch has been working just fine until recently...
The SmartWatch 2 - Software version is: 1.0.B.4.152 / 1.0.A.4.11
Thank you in advance
factory reset the watch
try it with someone else s phone
suuunly said:
Hello everyone!
I've been Googling for quite a while now but with no results, so I created an account here to see if any of you guys could perhaps help me!
I have this SmartWatch 2 which resets itself continuously as long as it has a Bluetooth connection. The phone its connect to is a Samsung Galaxy S3.
The screen goes dark and a progress bar appears which then leads to the Sony splash-screen, and then turns it back on.
As soon as I disable the Bluetooth connection the watch boots up just fine without any continuous hassle.
The watch has been working just fine until recently...
The SmartWatch 2 - Software version is: 1.0.B.4.152 / 1.0.A.4.11
Thank you in advance
Click to expand...
Click to collapse
Sounds like its trying to update the firmware. A quick and certain fix would be to bring it to Sony, of course.
Hi, Need some help. Just got a FreedomPop Samsung Galaxy SIII model SPH-L710 with Sprint logo on the back. It's running Android 4.4.2. I am unable to use bluetooth on this phone. Every time I attempt to open bluetooth I get an error message "Unfortunately, Settings has stopped" . Then I must press OK to exit the error message. Bluetooth remains on but whenever I attempt to scan the same thing happens every time. I can not connect to my Samsung Gear 2 Neo or my bluetooth keyboard or my car radio with built-in bluetooth for calls or music. If it doesn't find any bluetooth devices it just gives the standard message of "No nearby Bluetooth devices found" and stays on. But the minute you press scan at the bottom of the screen and it tries to find a nearby bluetooth device then it gives the error message "Unfortunately, Settings has stopped" and that's the end of story. I can't connect to anything. I called FreedomPop and they said their aware of the Bluetooth problem and said Samsung is working on it but they have no time frame when or if it will be fixed. So, can I possibly switch to a custom ROM from XDA that might fix this error without losing the connectivity of FreedomPop network? I am on their free 200/500/500 monthly plan so it's a great deal cause I don't use my phone much for calling or texting anyone and those numbers work fine for me. Any help would be appreciated. I already checked and the phone appears rooted and I can boot into the TeamWin Recovery Project V2.8.6.0 screen using the up-volume button and the Odin custom rom screen using the dn-volume button. I have also loaded Supersu from the playstore through Teamwin and it says I'm enabled. Thanks guys!
Hi there
You'd be best served asking for help from the experts who own your device, here
> Samsung Galaxy S III I9300, I9305 > Galaxy S III Q&A, Help & Troubleshooting > [HELP THREAD] Galaxy S3 Ask any question.
Good luck
Hi guys, this is a very particular problem and it's annoying the hell out of me. Can't find any reference to it anywhere.
Phone was working flawlessly until a firmware update was pushed by Samsung, taking me to the APEQ firmware version. Since then, the phone will become unresponsive whenever this scenario happens:
Connected to bluetooth (BMW 3-Series, 2015)
On an ongoing phone call
A second call comes in, but I don't answer it. I don't reject it either, I just let it ring.
Phone freezes, Loses connection to the car. Original call drops. Will become unresponsive for several minutes, or outright reboot by itself.
I've noticed that the phone app itself seems to be slow to execute any action: Start a call, blank screen for 3-5 seconds. End a call: Phone app screen frozen, phone unresponsive for 3-5 seconds.
I haven't rooted my phone, but I've rooted all my android devices in the past, so I'm not a stranger to it.
Any suggestions? I'd like to avoid flashing a new ROM because of the hassle (I just don't have the time to fiddle with a new ROM) and my SD card is encrypted...
Thank you all
I have similar on Galaxy Note 4 and also Galaxy Edge after marshmallow update. If using bluetooth, cant answer next call even if first call is diconnected already. phone freezes, rings forever, cant answer thru phone (nothing shows up on screen even saying there is a call, not in call log either)-- phone will sometimes reboot or i have to pull battery to get it to stop ringing. I also never know who called because no record in call logs of the perpetually ringing call.
Is anybody having issues with Gear S3 classic disconnecting very frequently? Any fix for this? I'm using Galaxy S4 GOC1 (5.0.1) ROOTED Verizon.
Mine has never disconnected from my Moto G4. You say you're rooted, are you still using the stock rom?
Sent from my SM-T530NU using Tapatalk
eddyo1993 said:
Is anybody having issues with Gear S3 classic disconnecting very frequently? Any fix for this? I'm using Galaxy S4 GOC1 (5.0.1) ROOTED Verizon.
Click to expand...
Click to collapse
Same for me with Gear S2 on my Galaxy S4 Android 5.0.1 rooted not frequently but happen too often for me
Seem bad/old BT on S4 ?
Most of time the S2 do not reconnect automatically. I'm trying workaround to reconnect auto..... (trigger app)
Tel864 said:
Mine has never disconnected from my Moto G4. You say you're rooted, are you still using the stock rom?
Sent from my SM-T530NU using Tapatalk
Click to expand...
Click to collapse
Yes I am currently running the stock rom. Its modified a little bit to keep the KK bootloader from updating to LP's bootloader
dersie said:
Same for me with Gear S2 on my Galaxy S4 Android 5.0.1 rooted not frequently but happen too often for me
Seem bad/old BT on S4 ?
Most of time the S2 do not reconnect automatically. I'm trying workaround to reconnect auto..... (trigger app)
Click to expand...
Click to collapse
Maybe, there is time that it doesn't disconnect at all for awhile then randomly starts doing it and continues right after the other .
My workaround with "Trigger" app works fine. Each time the watch is disconnected my script reconnect the watch after 3min disconnected. Worked every time this last days.
dersie said:
My workaround with "Trigger" app works fine. Each time the watch is disconnected my script reconnect the watch after 3min disconnected. Worked every time this last days.
Click to expand...
Click to collapse
Hi, can you please walk me through which settings you set up for this matter.
Also are you running pro version? Thanks
I not use the pro version.
You can select a trigger -> bluetooth and select wich device supervice for disconnect, so select the Gear in the list.
Then you can select action after this disconnection -> so for example : wait 10s or 3 min , turn off BT, wait 10s, kill Gear Manager, turn ON BT, select connect the Gear device, launch the Gear Manager.
Can confirm, Trigger is the answer
I used the Trigger suggestion posted above and have experienced zero issues since setting that up. The free version works fine for this so no need to get the pro subscription.
KILLDOGG said:
I used the Trigger suggestion posted above and have experienced zero issues since setting that up. The free version works fine for this so no need to get the pro subscription.
Click to expand...
Click to collapse
I can't wait to give this a shot. My Gear Frontier disconnects from my Galaxy S8 almost every time I use AndroidAuto (odd since that's USB), and i have to go back to the Gear app and press Connect to get it connected again. It must have 4 times a day, nearly every time I'm in my car. It's frustrating.
I suspect it's because Android Auto uses bluetooth for call audio or such, and I tried removing the bluetooth connection to my car, but Android Auto sets it up again every time you use it. And that seems to be the issue: Auto connects to the phone advertising the same capabilities (call audio) and so the phone drops the watch connection off. I'm not positive on the cause, but I'm positive that I'm tired of this experience.
skeene85 said:
I can't wait to give this a shot. My Gear Frontier disconnects from my Galaxy S8 almost every time I use AndroidAuto (odd since that's USB), and i have to go back to the Gear app and press Connect to get it connected again. It must have 4 times a day, nearly every time I'm in my car. It's frustrating.
I suspect it's because Android Auto uses bluetooth for call audio or such, and I tried removing the bluetooth connection to my car, but Android Auto sets it up again every time you use it. And that seems to be the issue: Auto connects to the phone advertising the same capabilities (call audio) and so the phone drops the watch connection off. I'm not positive on the cause, but I'm positive that I'm tired of this experience.
Click to expand...
Click to collapse
My Gear 3 disconnects when Android Auto connects as well. I have a Samsung S8+ which was just updated to Oreo. I am going to try the trigger app.
I buy samsung products from retail upgrades and over stocks. I got some classics and some frontiers. The watches are on the older firmware. I kept one for myself. After a few days of everything working great, including the battery, I decided to update the watch which is 2 days ago. Since then, my watch keeps disconnecting constantly, and the range is much shorter