Hi,
To make my story short,
1. Drivers were all ok.
2. Lg Bridge installed
3. Lgup Installed.
4. lg software update tool installed.
Now the story when i bought my phone it was h900 maybe and the firmware was lollipop 5.1.1 [email protected] Download mode looks korean when i manually make it to download mode. i tried to install marshmallow i downloaded the kdz firmware of h900 marshmallow but failed the lgup says unknown model tried many different techniques but failed.
lg bridge detects my phone as h900 it downloaded the firmware but when lg bridge reboot my phone to download mode it says please connect your handset (As if it is not detecting myphone). then i tried other techniques by editing build.prop but it failed it didn't detect my phone i was worried.
when i used adb and use the command adb devices it detect my phone as lgf600sxxxxxx.
i downloaded three kdz firmware (All Marshmallow) f600s marshmallow, h960 marshmallow and and h900 marshmallow.
i tried to install via lgup it says unknown model.....Failed
I just bring my phone to the local store he had Octoplus Box i gave the kdz he converted and flash first the h900. model firmware and yes the phone booted and now download mode becomes english every thing looks good and working fine except the signal when go to about option and network status it said "Radio off" bring back my phone home checked it tried different techniques failed.
i connected to lgup and now it detects my phone as lg h900 it tried to flash other kdz but "invalid kdz". Here
i download kdz tools convert kdz to dz all firmwares. tried to flash h960 and it worked phone booted but no signals at all "Radio off". Now phone detects as LG h960 in lgup and the at last i flash the f600 dz file via lgup and then phone booted everything changed to korean download mode becomes korean again and lgup detects my phone as lg f600 signals become ok also.
so i thing my first firmware was modified cooked firmware its system image was modified. Now i am using f600s firmware.
shadi47pk said:
Hi,
To make my story short,
1. Drivers were all ok.
2. Lg Bridge installed
3. Lgup Installed.
4. lg software update tool installed.
Now the story when i bought my phone it was h900 maybe and the firmware was lollipop 5.1.1 [email protected] Download mode looks korean when i manually make it to download mode. i tried to install marshmallow i downloaded the kdz firmware of h900 marshmallow but failed the lgup says unknown model tried many different techniques but failed.
lg bridge detects my phone as h900 it downloaded the firmware but when lg bridge reboot my phone to download mode it says please connect your handset (As if it is not detecting myphone). then i tried other techniques by editing build.prop but it failed it didn't detect my phone i was worried.
when i used adb and use the command adb devices it detect my phone as lgf600sxxxxxx.
i downloaded three kdz firmware (All Marshmallow) f600s marshmallow, h960 marshmallow and and h900 marshmallow.
i tried to install via lgup it says unknown model.....Failed
I just bring my phone to the local store he had Octoplus Box i gave the kdz he converted and flash first the h900. model firmware and yes the phone booted and now download mode becomes english every thing looks good and working fine except the signal when go to about option and network status it said "Radio off" bring back my phone home checked it tried different techniques failed.
i connected to lgup and now it detects my phone as lg h900 it tried to flash other kdz but "invalid kdz". Here
i download kdz tools convert kdz to dz all firmwares. tried to flash h960 and it worked phone booted but no signals at all "Radio off". Now phone detects as LG h960 in lgup and the at last i flash the f600 dz file via lgup and then phone booted everything changed to korean download mode becomes korean again and lgup detects my phone as lg f600 signals become ok also.
so i thing my first firmware was modified cooked firmware its system image was modified. Now i am using f600s firmware.
Click to expand...
Click to collapse
I have the same cell lg v10 AT&T I want to update by LG Bridge and I get the update available that is h90120L but according to my cell phone is the h900 model look for another way to update the correct rom and look for update by IME and it turns out that it belongs to model LGH901BK Of T-Mobile.
With what program did you update your cell phone and how did you do it?
dgonblue said:
I have the same cell lg v10 AT&T I want to update by LG Bridge and I get the update available that is h90120L but according to my cell phone is the h900 model look for another way to update the correct rom and look for update by IME and it turns out that it belongs to model LGH901BK Of T-Mobile.
With what program did you update your cell phone and how did you do it?
Click to expand...
Click to collapse
didnt understand what are u saying ???
1. detect correct model by using adb [adb devices].
2. download rom according to model kdz file.
3. extract it using kdz tools and get dz file.
4. flash it with lgup.
shadi47pk said:
didnt understand what are u saying ???
1. detect correct model by using adb [adb devices].
2. download rom according to model kdz file.
3. extract it using kdz tools and get dz file.
4. flash it with lgup.
Click to expand...
Click to collapse
Thanks for replying try all the methods that indicate with LGUP, unknown model I followed all the steps as it indicates here in the forum, with the LG Bridge Failed update, LG Flash Tool 2014 Failed update.
I seem to have the same problem as your cell phone, the serial of my device is LGF600Saxxxxxxx. When entering the download mode, everything is displayed in Korean.
My question is what program to flash your device when you took it (Local store Octoplus Box)
My cell phone is Lg V10 h900 At&t lollipop 5.1.1 and I just bought my device and I want to update it, apologies for my English.
shadi47pk said:
Hi,
To make my story short,
1. Drivers were all ok.
2. Lg Bridge installed
3. Lgup Installed.
4. lg software update tool installed.
Now the story when i bought my phone it was h900 maybe and the firmware was lollipop 5.1.1 [email protected] Download mode looks korean when i manually make it to download mode. i tried to install marshmallow i downloaded the kdz firmware of h900 marshmallow but failed the lgup says unknown model tried many different techniques but failed.
lg bridge detects my phone as h900 it downloaded the firmware but when lg bridge reboot my phone to download mode it says please connect your handset (As if it is not detecting myphone). then i tried other techniques by editing build.prop but it failed it didn't detect my phone i was worried.
when i used adb and use the command adb devices it detect my phone as lgf600sxxxxxx.
i downloaded three kdz firmware (All Marshmallow) f600s marshmallow, h960 marshmallow and and h900 marshmallow.
i tried to install via lgup it says unknown model.....Failed
I just bring my phone to the local store he had Octoplus Box i gave the kdz he converted and flash first the h900. model firmware and yes the phone booted and now download mode becomes english every thing looks good and working fine except the signal when go to about option and network status it said "Radio off" bring back my phone home checked it tried different techniques failed.
i connected to lgup and now it detects my phone as lg h900 it tried to flash other kdz but "invalid kdz". Here
i download kdz tools convert kdz to dz all firmwares. tried to flash h960 and it worked phone booted but no signals at all "Radio off". Now phone detects as LG h960 in lgup and the at last i flash the f600 dz file via lgup and then phone booted everything changed to korean download mode becomes korean again and lgup detects my phone as lg f600 signals become ok also.
so i thing my first firmware was modified cooked firmware its system image was modified. Now i am using f600s firmware.
Click to expand...
Click to collapse
could you tell me how to make unknown device in LGUP to be recognized ? i have same devices like u, refurbished V10 tmobile H901, but detected in ADB F600S, please help me, thanks
@dgonblue @ebay2006 hi folks have you guys found any solution for this problem ???? it's been really irritating with LGUP and lost all my energy connecting my device to it
@shadi47pk i want to flash F600S30D nougat kdz. is there any other way bypassing the octoplus box method ???
SandyKick said:
@[email protected] hi folks have you guys found any solution for this problem ???? it's been really irritating with LGUP and lost all my energy connecting my device to it
@shadi47pk i want to flash F600S30D nougat kdz. is there any other way bypassing the octoplus box method ???
Click to expand...
Click to collapse
Did you try Lgup with Uppercut ?
http://downloads.codefi.re/autoprime/LG/Flash_Tools/LGUP/
Mine was h901 when i update it to new version of h901 it bricked in qualcomm 9008 then i fix it & appears that it's an f600l not h901 then i flashed aldz of f600l and now it's working with nougat but no root
samy2015 said:
Mine was h901 when i update it to new version of h901 it bricked in qualcomm 9008 then i fix it & appears that it's an f600l not h901 then i flashed aldz of f600l and now it's working with nougat but no root
Click to expand...
Click to collapse
Hello my lg v10 is a H900 but turned out to be a F600l on the motherboard, update it and be bricked in qualcomm 9008, and flashed QFIL and I get the following error:
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
14:00:10: {ERROR: It took 178.95300000 seconds to open port. Which is longer than 3.000. This indicates your target is not stable}
Writing log to 'C:\Users\xxxx\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt', might take a minute
Log is 'C:\Users\xxxx\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
Please some solution thanks.
---------- Post added at 06:58 AM ---------- Previous post was at 06:51 AM ----------
SandyKick said:
@dgonblue @ebay2006 hi folks have you guys found any solution for this problem ???? it's been really irritating with LGUP and lost all my energy connecting my device to it
@shadi47pk i want to flash F600S30D nougat kdz. is there any other way bypassing the octoplus box method ???
Click to expand...
Click to collapse
Hello, if everything works well with android 5.1.1 better not upgrade and update and bricked in qualcomm 9008, and now I'm looking to fix this in my lg v10
dgonblue said:
Hello my lg v10 is a H900 but turned out to be a F600l on the motherboard, update it and be bricked in qualcomm 9008, and flashed QFIL and I get the following error:
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
14:00:10: {ERROR: It took 178.95300000 seconds to open port. Which is longer than 3.000. This indicates your target is not stable}
Writing log to 'C:\Users\xxxx\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt', might take a minute
Log is 'C:\Users\xxxx\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
Please some solution thanks.
---------- Post added at 06:58 AM ---------- Previous post was at 06:51 AM ----------
Hello, if everything works well with android 5.1.1 better not upgrade and update and bricked in qualcomm 9008, and now I'm looking to fix this in my lg v10
Click to expand...
Click to collapse
See here:
https://forum.xda-developers.com/tmobile-lg-v10/general/unbrick-h901-f600l-board-2017-t3635697
dgonblue said:
Thanks for replying try all the methods that indicate with LGUP, unknown model I followed all the steps as it indicates here in the forum, with the LG Bridge Failed update, LG Flash Tool 2014 Failed update.
I seem to have the same problem as your cell phone, the serial of my device is LGF600Saxxxxxxx. When entering the download mode, everything is displayed in Korean.
My question is what program to flash your device when you took it (Local store Octoplus Box)
My cell phone is Lg V10 h900 At&t lollipop 5.1.1 and I just bought my device and I want to update it, apologies for my English.
Click to expand...
Click to collapse
all the softwares will fail to update. you do it exactly i say.
1. adb devices
(it will show your device name and etc just send its picture to me) i will tell you the correct firmware.
ebay2006 said:
could you tell me how to make unknown device in LGUP to be recognized ? i have same devices like u, refurbished V10 tmobile H901, but detected in ADB F600S, please help me, thanks
Click to expand...
Click to collapse
download f600s firmware kdz file convert it to dz then flash if every thing worked you will see it in lgup your original model f600s
does V10 F600x has bootloop issue?
Related
Just as helping
[*]I see very topic unbrick qualcomm 9008 lg g2, lg g3 but all tool can not use.
I have full tool board ver 2.9.( only 2.9).
Link download drive.google.xxx /file/d/0B_Hol5T47S-bYjNETmVPZkdWUms/view?usp=sharing (xxx= com)
Support lg g2, lg g3 workking 100%.
Download tool, open BoardDiag and choose file tot correct model phone of you( you can download tot in xda)
See guide in pictrure : very easy.
Note
Hold power 2 minute and connect cable ( or remove battery)>>And open tool check ap, emmc test again
Then unbrick done remove cable, hold power 30 second and hold volume up connect cable phone put downloadmod >> Use lgflashtool 1.5 flash file tot again >> done.
If done pls donate a few beers paypal of my Thank you very much.
atlist give a proper link to download
http://forum.xda-developers.com/attachment.php?attachmentid=3007071&d=1415553921
jabi_james said:
http://forum.xda-developers.com/attachment.php?attachmentid=3007071&d=1415553921
Click to expand...
Click to collapse
Thank you but tool of my ver 2.9 no need 3.9
i upload when i post 10 post
Tool of you never use done 100%
thnx alot bud
willcracker said:
Just as helping
[*]I see very topic unbrick qualcomm 9008 lg g2, lg g3 but all tool can not use.
I have full tool board ver 2.9.( only 2.9).
Link download drive.google.xxx /file/d/0B_Hol5T47S-bYjNETmVPZkdWUms/view?usp=sharing (xxx= com)
Support lg g2, lg g3 workking 100%.
Download tool, open BoardDiag and choose file tot correct model phone of you( you can download tot in xda)
See guide in pictrure : very easy.
Note
Hold power 2 minute and connect cable ( or remove battery)>>And open tool check ap, emmc test again
Then unbrick done remove cable, hold power 30 second and hold volume up connect cable phone put downloadmod >> Use lgflashtool 1.5 flash file tot again >> done.
If done pls donate a few beers paypal of my Thank you very much.
Click to expand...
Click to collapse
what is dir ?willcrack how to make,or in where folder?
G pro2 hk 32GB.
Can't go the download. Mode. But can go recovey mode
Dual wipe can't boot phone. Stay in lg logo and have led light
Have the more deatil this tool.
Thank you.
How to Fix "error device not found in dload trying flash programmer" when use boardiag .
Lg g2 qualcomm 9008 when install driver then use tool boardiag fake tool say device not found in dload trying flash programmer
when you use tool fake board share in xda another tool say device not found in dload trying flash programmer. Unplug cable You need remove battery of2 hold power 1 minute) then connect cable again and use tool again
Sure install driver 100% wrong
With windowns 64 bit you need restart pc then click f8 choose disbable driver singturne....
Then remove battery (hold power 1 minute with lg g2) then connect cable try use tool unbrick >> sure done 100%
I will updload video error dload
Remember disbbale tool sony erricson if you have open tool in taskbar
hi
hi my lg g pro2 Qualcm HS-USB QDLoader 9008.No responnse from the device. Check PMIC first and if still boot problem, replace please help me
After unbricking my phone...phone was working finr...but i did a factroy reset..the problm begun....my phone got stucked in recovery..means after boot it goes to recovery nd try to reset phone....i flashed each nd any kdz tot for pro 2.... still the same problm...i used board diag again but i think there is some software problm with my emmc
Guys, would need your help. I have installed a rom modification on my G Flex 2 H955 and upon flashing thru flashfire I am stuck with bootloop. Of course I have system.img backup done - but in ma laptop and I am not able to push it thru the LG_Root app. If it were left on my internal storage then it would be fine. But right now I am totally crashed. I have tried every method but it doesn't work. LG FLASH TOOL (kdz) method does not work. Both prog and phone starting up to show firmware update but instantly I am getting stuck at 9% and no go. I am sure I could make it using a TOT Method alas there's no tot file for the H955.
Been tryin' to push system.img thru LG_Root but somehow it seems to not to.
I have this device just a couple days but I can not put it back sayin' I don't know what's happened, please fix it. They won't buy it.
If there's anybody being able to help, I am instantly sending 100 dollars to him/her. I know that ain't too much but perhaps someone may appreciate this and so I.
Many thanks.
Your phone is bricked. There is no way to push the image.
Only solution is to send it back to LG.
You should try to flash using LG UP... report back
You should try LG mobile support tool. First time after trying to debloat my Flex was bootloping. I don't remember now why but LG flash tool didn't worked for me.
What I did. Downloaded USB drivers and Support Tool from LG.com. Installed drivers. Then connected botlooping phone, let Windows do its install drivers "thingie". Connected phone in download mode, let Windows work. Run Tool ant select Options-update recovery. And voilà.
By the way I have H955 EU. Sorry for my English.
LgUp stops progressing at 9% too. But thanks brotha
Huh did it and no go.
I had hard bricked my previous LG device, had same problem that KDZ method haven't worked and it stucked, I managed to unbrick it with particularry these instructions: http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
There is TOT, DLL files, you just need to extract it from KDZ file and you could download kdz from this website: http://lg-phone-firmware.com/index.php?id_mod=142
You could use my short instruction how to extract TOT and DLL from KDZ: http://forum.xda-developers.com/showpost.php?p=64427160&postcount=575
I haven't tested it on Flex 2, so please tell me results.
Will try and post results for about 2hrs. I've got nothing to lose now.
Many thanks bro. I have tried this method as well. Extracted kdz to dz and dz to bin plus dll file. LG tool uploaded the bin files and I was ready to go but afted initial read it got stuck. The phone on its way to the Service Centre hopefully they know their stuff.
hi guys, want to share with you how i unbricked my t-mobile lg v10 . it's h901 on the sticker under battery while motherboard said f600l (korean version) i tried tungick sdcard method but didnt worked for me dont know why. then i found a video on youtube posted 3 days ago . using qfil & lg firmware extractor & lgup .phone should be on qualcomm 9008 mode. extracted f600l 20e into dz then extracted the dz file on a specified folder opened qfil select flat build . select the msm8992.mbn file then select the folder of extracted dz files f600l 20e select rawprogram.xml cancel the patch file. connect phone (in 9008 mode) press download (if it didnt choose the port automatically choose it yourself) .it will take a minute to download. then diconnect phone and reconnect it in download mode (press vol up while connecting cable to pc) it should enter download mode. then flash f600l 30e with lgup . and voila now i have my phone back to live with android 7.0 with no errors at all all thanks goes to aaya angush as he post the video & .mbn + .xml files thank you too much link to tutorial video: https://www.youtube.com/watch?v=JyY8jwdvCJI link to my phone booting after flash: https://youtu.be/Ut-psw_GELQ dont forget to install qualcomm drivers
all kdz here:
https://lg-firmwares.com/
another note: after some failed methods i brick the phone by flashing somefiles from h901 with files from f600l kdz's with qfil after that pc won't recognize phone at all. except an empty battery blinking icon if i connect phone without battery. then ifound this picture to short test point pins on the motherboard (take off battery. then connect the two pins with a small copper wire then connect usb cable to pc while still connecting pins .when you see qualcomm hs-usb 9008 on pc device manager release the wire then download correct files with qfil)
samy2015 said:
hi guys, want to share with you how i unbricked my t-mobile lg v10 . it's h901 on the sticker under battery while motherboard said f600l (korean version)
Click to expand...
Click to collapse
Thank you samy for pointing out the video. The problem I have is that I don't have network now. please help as my sim is not working, though I am on android 7.0 as well. my stickers also said h901, the phone was previously loading as T-Mobile and that is where LG bridge tried to update it to 20l and it got bricked to 9008.
any way now I have the phone on F600L30e as per the above method but I have this screenshot of the network status screen, my sim is not working, I got no network
JuGnO said:
Thank you samy for pointing out the video. The problem I have is that I don't have network now. please help as my sim is not working, though I am on android 7.0 as well. my stickers also said h901, the phone was previously loading as T-Mobile and that is where LG bridge tried to update it to 20l and it got bricked to 9008.
any way now I have the phone on F600L30e as per the above method but I have this screenshot of the network status screen, my sim is not working, I got no network
Click to expand...
Click to collapse
dont know why i didn't faced this . flash the f600l 30e again . may be it will be fixed or try another simcard from different provider .heres a pic of my network status
samy2015 said:
dont know why i didn't faced this . flash the f600l 30e again . may be it will be fixed or try another simcard from different provider .heres a pic of my network status
Click to expand...
Click to collapse
Can you please share the screenshot of your software page in about
JuGnO said:
Can you please share the screenshot of your software page in about
Click to expand...
Click to collapse
ok see here:
JuGnO said:
Thank you samy for pointing out the video. The problem I have is that I don't have network now. please help as my sim is not working, though I am on android 7.0 as well. my stickers also said h901, the phone was previously loading as T-Mobile and that is where LG bridge tried to update it to 20l and it got bricked to 9008.
any way now I have the phone on F600L30e as per the above method but I have this screenshot of the network status screen, my sim is not working, I got no network
Click to expand...
Click to collapse
do you tried to choose network manually ? is the phone detect the card ? did you change mode may be its 4g or 3g
samy2015 said:
do you tried to choose network manually ? is the phone detect the card ? did you change mode may be its 4g or 3g
Click to expand...
Click to collapse
I cant find the place where I can select the network manualy not the area where it shows 4g or 3g
The sim card was read since i have sim pin lock and have to enter it to open phone
---------- Post added at 07:06 AM ---------- Previous post was at 07:05 AM ----------
samy2015 said:
ok see here:
Click to expand...
Click to collapse
I have identical screenshot
JuGnO said:
I cant find the place where I can select the network manualy not the area where it shows 4g or 3g
The sim card was read since i have sim pin lock and have to enter it to open phone
---------- Post added at 07:06 AM ---------- Previous post was at 07:05 AM ----------
I have identical screenshot
Click to expand...
Click to collapse
then maybe its a only a setting problem
i cant find where to choose 3g or 4g in my phone
samy2015 said:
then maybe its a only a setting problem
i cant find where to choose 3g or 4g in my phone
Click to expand...
Click to collapse
Well i tried and checked with many softwares
All said rafio off
Although one went above and beyond and showed that my phine is infact connect to appropriate network but radio is turned off by system probably
Hereis the screenshot
JuGnO said:
Well i tried and checked with many softwares
All said rafio off
Although one went above and beyond and showed that my phine is infact connect to appropriate network but radio is turned off by system probably
Hereis the screenshot
Click to expand...
Click to collapse
well i can't help with that
samy2015 said:
another note: after some failed methods i brick the phone by flashing somefiles from h901 with files from f600l kdz's with qfil after that pc won't recognize phone at all. except an empty battery blinking icon if i connect phone without battery. then ifound this picture to short test point pins on the motherboard (take off battery. then connect the two pins with a small copper wire then connect usb cable to pc while still connecting pins .when you see qualcomm hs-usb 9008 on pc device manager release the wire then download correct files with qfil)
Click to expand...
Click to collapse
I've try this test point, there's nothing changes
ardian1899 said:
I've try this test point, there's nothing changes
Click to expand...
Click to collapse
you tried it then phone didnt enter qualcomm 9008 mode ?
you must stay short the pins till you connect cable to pc and after pc detect phone release the short wire
samy2015 said:
you tried it then phone didnt enter qualcomm 9008 mode ?
you must stay short the pins till you connect cable to pc and after pc detect phone release the short wire
Click to expand...
Click to collapse
Yes, I did that.. unfortunately nothings happen.
Do you think I may have better luck with the micro sd method?
ardian1899 said:
Yes, I did that.. unfortunately nothings happen.
Do you think I may have better luck with the micro sd method?
Click to expand...
Click to collapse
i don't know . is your phone showing any sign of life ?
samy2015 said:
i don't know . is your phone showing any sign of life ?
Click to expand...
Click to collapse
Yes..
If I connect the phone to the computer without battery, nothings appear
If I connect with battery, it's always enter download mode regardless I hold the up button or not (even if I hold the down button)
If I try to turn it on without connecting to the computer, the LG logo is flashing for a moment then enter download mode again.
On device manager, it's "LGE AndroidNet Serial USB".
LG bridge can't connect with the phone as well as QFIL (anymore).
Only visible on LGup and LG flashtool, been trying to flash using any KDZ and DZ (H901 and F600L) on both software, no luck. It's stopping between 4-36%..
I may try on another laptop in a few hours.
Any idea perhaps?
ardian1899 said:
Yes..
If I connect the phone to the computer without battery, nothings appear
If I connect with battery, it's always enter download mode regardless I hold the up button or not (even if I hold the down button)
If I try to turn it on without connecting to the computer, the LG logo is flashing for a moment then enter download mode again.
On device manager, it's "LGE AndroidNet Serial USB".
LG bridge can't connect with the phone as well as QFIL (anymore).
Only visible on LGup and LG flashtool, been trying to flash using any KDZ and DZ (H901 and F600L) on both software, no luck. It's stopping between 4-36%..
I may try on another laptop in a few hours.
Any idea perhaps?
Click to expand...
Click to collapse
your phone just need the correct kdz then it back to life. see its model on motherboard to make sure what to flash
what error lgup is giving you if its stuck at 4% its not even start flashing. i faced that stuck at 4% then extracted kdz into dz then it flashed
samy2015 said:
your phone just need the correct kdz then it back to life. see its model on motherboard to make sure what to flash
what error lgup is giving you if its stuck at 4% its not even start flashing. i faced that stuck at 4% then extracted kdz into dz then it flashed
Click to expand...
Click to collapse
I'm attaching the error screenshot. The best I can get is 36%..
ardian1899 said:
I'm attaching the error screenshot. The best I can get is 36%..
Click to expand...
Click to collapse
you are trying to flash h901 20j if it will complete phone bricked again . try flash f600l 20e or f600l 30e try kdz and dz & let us see the error
samy2015 said:
you are trying to flash h901 20j if it will complete phone bricked again . try flash f600l 20e or f600l 30e try kdz and dz & let us see the error
Click to expand...
Click to collapse
Looks like I'm out of luck so far.
All of them happen at (or probably after) step display is showing "modem".
If I use kdz: H901xx returning "does not support refurbish process". F600Lxxx returning "Error: KDZ file is invalid. H901 -> F600L"
Any suggestion?
I'll try the TP again..
I had LG G5 H820 AT&T handset.
Last week I decided to Update my device to Nougat Update manually using LGUP software to H820PR20a_00_1123.kdz file. But the phone never restarted after the update was completed successfully. Now it is only showing qualcomm hs-usb qdloader 9008 port in Device manager.
It was the worst decision, now is there any way i can repair this issue. I have tried Qualcomm tools with LG G5 H850 ROM kdz file, also tried LG G5 LS992 tot files. But nothing is working out.
Help will be appreciated.
shuntynz said:
I had LG G5 H820 AT&T handset.
Last week I decided to Update my device to Nougat Update manually using LGUP software to H820PR20a_00_1123.kdz file. But the phone never restarted after the update was completed successfully. Now it is only showing qualcomm hs-usb qdloader 9008 port in Device manager.
It was the worst decision, now is there any way i can repair this issue. I have tried Qualcomm tools with LG G5 H850 ROM kdz file, also tried LG G5 LS992 tot files. But nothing is working out.
Help will be appreciated.
Click to expand...
Click to collapse
Contact me for beta testing repair H820 .. We need find kdz for Unbrick if can .. Skype : vungocmobile
check your skype
H820 Dead Boot
The same problem exists on my phone.
I am trying to update my lg v450vm from android 10 to 11.
It is running stock Verizon V450VM20f
I downloaded V450VM30b_00_VZW_US_OP_0120 KDZ from the LG site along with LGUP, Uppercut and the LG USB drivers. I installed the USB drivers and LGUP.
I place the phone in download mode and run Uppercut.
Uppercut recognizes my device, I select the upgrade button and then the KDX file.
When I press start, the progress bar shows 4%, the title bar says USB connection established and then Uppercut closes.
Running on Windows 11
Any thoughts?
Len
Edit: Title should read flashing stock firmware
Lenster45 said:
I am trying to update my lg v450vm from android 10 to 11.
It is running stock Verizon V450VM20f
I downloaded V450VM30b_00_VZW_US_OP_0120 KDZ from the LG site along with LGUP, Uppercut and the LG USB drivers. I installed the USB drivers and LGUP.
I place the phone in download mode and run Uppercut.
Uppercut recognizes my device, I select the upgrade button and then the KDX file.
When I press start, the progress bar shows 4%, the title bar says USB connection established and then Uppercut closes.
Running on Windows 11
Any thoughts?
Len
Edit: Title should read flashing stock firmware
Click to expand...
Click to collapse
Solved.
My problems was that I had to download a common.dll file for LG and place it in the common folder for LGUP. The update went well to 11. Cant wait for a 12 KDZ to be released.
This is one of my top topics
stick merge
Hello there, I am currently on V450P20n with Android 10 from Sprint..Bought the unit from eBay and I am currently using it in Guatemala. No updates or anything since July 11th 2021. Is there a step by step guide of how we can go ahead and get Android 11 (Stuck, not Custom ROM) ? I had some experience back in the days with Samsung and Odin to flash some OEM ROMS, and I love how this cellphone looks. He is a keeper.
Anyways, any help would be appreciated!