I am trying to upgrade my S4 phone from KitKat 4.4.2 (Custom Rom) to Lollipop 5.0.1 (Official Rom).
Should I need any Pit file with the Firmware downloaded?
I have downloaded below Lollipop firmware but when flashing, result is same as Failed.
I9506XXUDPG2_I9506VDSDOK2_I9506XXUDPH1_HOME.tar.md5
In Odin result shows ''Complete (Write) protection failed.''
If I see my phone downloading mode and at top subjects are as below.
Product Name: SGH-337
Cureent Binary: Samsung Official
System Status: Custom
Knox Kernal Lock: 0x0
Knox Warranty Void: 0x0
CSD-Config-Lsg: 8x30
Write Protection: Enable
eMMC Burst Mode: Enable
I think Write protection is enabled in system which is causing flashing fail.
I tried every method like below.
• Uninstall Kies.
• Blocking Antivirus.
• Doing Off Firewall and windows defender.
• Changing Cable and ports.
• Changing Computer systems.
Looking forward for your help or guidance.
Hi !
Flashing PIT file may be required in case of FAIL message
Check this guide https://forum.xda-developers.com/showthread.php?t=2265477
Good luck !
Related
Needing some help before i take my 2 day old S6 back to the shop with my tail between my legs!!
i have an unlocked SM-G920F bought from o2, and was trying to flash this rom http://forum.xda-developers.com/galaxy-s6/development/rom-tyrannus-rom-v1-0-31-07-2015-t3169760 . i've been flashing custom roms for as long as i can remember, and all the usual procedures were followed. all usb drivers are installed/updated etc. tried different ports/cables/odin versions
the problem basically started as soon as i tried flashing the bootloader and modem, odin came up with a pass, but when my phone restarted it showsSYSTEM REV. CHECK FAIL. DEVICE:2, BINARY:1
now, i can't get into recovery mode at all. i then tried flashing these stock roms (except the 5.0.2) from sam mobile http://www.sammobile.com/firmwares/database/SM-G920F/O2U/ using odin, but they all fail at NAND Write. i then also tried the emergency recovery option using smart switch, which also fails.
so now, all i can really do is boot into download mode and nothing else, odin recognises my phone, but doesnt write anything to it.
when im in download mode i get this display:
ODIN MODE
Product name: SM-G920F
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: OFF
Secure Download: ENABLED
KNOX warranty void 1 (0x0301)
RP SWREV: B:3 K:2 S:2
http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522
920-I unikernel v8,tyrannous rom
already looked there....mega download link is dead
anyone?
Im currently having the same issue here, im trying to flash a stock firmware to remove root and im not getting anywhere, if someone finds a way to fix it let me know pleas, im using the G920p from sprint
I am trying to restore my AT&T Galaxy S7 (G930A) back to the stock firmware. I am stuck going to the boot-loader menu and do not have an OS on it. The phone is on the latest update as of November 5th. I have downloaded and tried to flash nearly every firmware for the G930A and every time i try to flash them in Odin it either says failed, SHA256, or Fail Model dis match fail All threads completed. (succeed 0/ failed 1). If anyone could point me to a firmware that would work that would be amazing. Any help would be greatly appreciated. Sorry for coming across as a noob this is my first post.
And when I go downloading mode it shows
Odin mode high speed
Product name sm-g930a
Current binary - Samsung Official
System status custom
Fap lock on
Warranty voided 0x0
Qualcomm secure boot enabled
Rp swrev: b4 (2,1,1,1 ) k1 s3
Secure download enable
I had the same issue as u and I tried this and it worked
forum.xda-developers.com/att-galaxy-s7/how-to/g930uueu4api3-firmware-download-t3481159
Try flashing without the BL part
Good evening,
I am currently deciding whether or not this is actually fixable, i'm trying to help a friend out who soft bricked a SM-T820 Samsung S3 WIFI. Upon booting it goes direct to the bootloader with this error message:
ODIN: Flash read failure
ERROR: There is no pit binary.
RECOVERY BOOTING…
DLL: MMC_READ FAILED
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-T820
CURRENT BINARY: Secure Official
SYSTEM STATUS: Custom
FRP LOCK: OFF
OEM LOCK: ON
DID: 03ea98ebf9cf
WARRANTY VOID: 0xffffffff
QUALCOMM SECUREBOOT: ENABLE
SECURE DOWNLOAD: ENABLE
I have yet to get my hands on the tablet because they live out of province but I will be visiting soon. Based off the given information, is this considered fixable by chance with a re-flashed PIT File and system image. Just trying to get some ideas on the repair process before proceeding.
Thanks,
Axe
axehole said:
Good evening,
I am currently deciding whether or not this is actually fixable, i'm trying to help a friend out who soft bricked a SM-T820 Samsung S3 WIFI. Upon booting it goes direct to the bootloader with this error message:
ODIN: Flash read failure
ERROR: There is no pit binary.
RECOVERY BOOTING…
DLL: MMC_READ FAILED
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-T820
CURRENT BINARY: Secure Official
SYSTEM STATUS: Custom
FRP LOCK: OFF
OEM LOCK: ON
DID: 03ea98ebf9cf
WARRANTY VOID: 0xffffffff
QUALCOMM SECUREBOOT: ENABLE
SECURE DOWNLOAD: ENABLE
I have yet to get my hands on the tablet because they live out of province but I will be visiting soon. Based off the given information, is this considered fixable by chance with a re-flashed PIT File and system image. Just trying to get some ideas on the repair process before proceeding.
Thanks,
Axe
Click to expand...
Click to collapse
According to the info you have provided they were trying to/or did try to change the system files e.g: rooting
yes the partition is missed up so you will need a pit file with a full stock rom to flash.
yes, as you said you need a PIT file and a repairing frimware.
try with another cable also.
report back when you have a chance to see what we can do.
any PIT file for samsung galaxy tab s3 sm-t825
Hello there!
I'm in situation were I need advices. I tried to root my phone years back and had no success. I tried it the third time and still have the same issues.
I have to root my phone to withdraw the whatsapp key for the crypt12 databases.
Because of the viruses installed I need professional advice which steps are necessary to root without loosing the data/data/com.whatsapp folder and without infecting my phone/myself with fake dl-links.
The internet is filled with too much scam and desinformation about this phone modell.
That shows my ODIN MODE (Download mode)
Phone: Samsung SM-G900F
Current Binary: CUSTOM
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x0
Secure download : Enable
The recovery says:
MMB29M.G900FXXU1CSA1/6.0.1
user/release-keys
signature verification error by trying to flash supersu in recovery mode.
Flashed AP TWRP but changed nothing, its the same recovery menu as before.
I don't know if I unlocked my bootloader. Some websites say I have to root first?
Thanks in advance I hope somebody can fish me out
Hint: Add Samsung SM-G900F to this thread's title thus mainly owners of such a phone get addressed.
Is this phone even rootable?!
title says it. How to I identify the file that I need to load. Identify correct device - I have Samsung Galaxy Tab 3 7inch but can't tell if version twrp-3.1.1-0-lt02ltetmo.img is for my device
OTHER info that might help.
I do NOT have a SD card installed but can get if required
when in download mode
ODIN MODE
PRODUCT NAME: SM-T217A
CURRENT BINARY: Samsung Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0X30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
SECURE CHECK FAIL : recovery
Thanks
still looking - tried some roms and they just bricked my device - oh well - be I can get to it with Odin and NONE of the downloads work - they ALL FAIL - I just want to flash to something that works and I really don't need anything that WAS on it anyway - just want to use on WiFi