I am trying to restore my AT&T Galaxy S7 (G930A) back to the stock firmware. I am stuck going to the boot-loader menu and do not have an OS on it. The phone is on the latest update as of November 5th. I have downloaded and tried to flash nearly every firmware for the G930A and every time i try to flash them in Odin it either says failed, SHA256, or Fail Model dis match fail All threads completed. (succeed 0/ failed 1). If anyone could point me to a firmware that would work that would be amazing. Any help would be greatly appreciated. Sorry for coming across as a noob this is my first post.
And when I go downloading mode it shows
Odin mode high speed
Product name sm-g930a
Current binary - Samsung Official
System status custom
Fap lock on
Warranty voided 0x0
Qualcomm secure boot enabled
Rp swrev: b4 (2,1,1,1 ) k1 s3
Secure download enable
I had the same issue as u and I tried this and it worked
forum.xda-developers.com/att-galaxy-s7/how-to/g930uueu4api3-firmware-download-t3481159
Try flashing without the BL part
Related
I have a rooted android device samsung galaxy s3 and it was running fine and everything till one day it said to install an update. i accepted it and while it was updating all of a sudden it went to that black screen and says, " system software not authorized by Verizon Wireless has been found on your phone. Please turn off you phone and go to the nearest Verizon Wireless store for help." Then thats where i couldn't do anyting with my phone but go to download/ODIN MODE and rebooting system thing where you can reboot system. IM very new and i don't know much about rooting and the meanings of a lot of words like unlock bootloader. If i go to ODIN MODE it says
ODINE MODE
PRODUCT NAME: SCH-1535
CUSTOM BINARY DOWNLOAD: Yes (1 Counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty bit: 1
BOOTLOADER RP SWREV:1
i think this doesn't look good. WHat should i do to make my phone be working again and not showing that black screen.
I already wiped all data and tried to do that StockROm thing on my computer ODIN and still nothing.
Is my bootloader locked? if so do i need to unlock it to make my phone work again? Thanks so much for your time
Same with mine I think it's called a bricked phone and think there is nothing we can do about it, hopefully someone has a solution
Might Work?
Remeax said:
I have a rooted android device samsung galaxy s3 and it was running fine and everything till one day it said to install an update. i accepted it and while it was updating all of a sudden it went to that black screen and says, " system software not authorized by Verizon Wireless has been found on your phone. Please turn off you phone and go to the nearest Verizon Wireless store for help." Then thats where i couldn't do anyting with my phone but go to download/ODIN MODE and rebooting system thing where you can reboot system. IM very new and i don't know much about rooting and the meanings of a lot of words like unlock bootloader. If i go to ODIN MODE it says
ODINE MODE
PRODUCT NAME: SCH-1535
CUSTOM BINARY DOWNLOAD: Yes (1 Counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty bit: 1
BOOTLOADER RP SWREV:1
i think this doesn't look good. WHat should i do to make my phone be working again and not showing that black screen.
I already wiped all data and tried to do that StockROm thing on my computer ODIN and still nothing.
Is my bootloader locked? if so do i need to unlock it to make my phone work again? Thanks so much for your time
Click to expand...
Click to collapse
I dunno if this will work for you. But I had the same message and when I booted in Download mode I just hit Cancel then rebooted and it worked?
If you flashed cyanogenmod, that means you're bootloader is unlocked, which is a good thing.
Can you get into CWM or TWRP? I don't have a samsung so i don't know about ODIN (i presume it's like flashtools for Xperia).
For as long as your phone vibrates (or does pretty much anything when you boot it up) your phone is not hardbricked, which is also good .
Try getting into CWM, shut down your phone completely, wait 5 seconds, then do: Volume Down + Home + Power key . This will get you into bootloader state and try reflashing your old backup, a stock rom or cyanogenmod.
First time with these softbricks is always the most fun ^^. Been there done that, i thought i spend 250 euro's on a phone that was broken .
Btw. Always make a backup for these kind of situations.
Remeax said:
I have a rooted android device samsung galaxy s3 and it was running fine and everything till one day it said to install an update. i accepted it and while it was updating all of a sudden it went to that black screen and says, " system software not authorized by Verizon Wireless has been found on your phone. Please turn off you phone and go to the nearest Verizon Wireless store for help."...
Click to expand...
Click to collapse
You took the 4.3 update. You must now Odin to stock 4.3 to unbrick, do not Odin to any other (previous) version. There is a safe root method.
I do not think there is custom recovery and bootloader is now permalocked.
http://forum.xda-developers.com/showthread.php?t=2270191 has a link to the odin file and the root method in post 2 or 3 i believe.
Ok how do i get it?
afextwin said:
You took the 4.3 update. You must now Odin to stock 4.3 to unbrick, do not Odin to any other (previous) version. There is a safe root method.
I do not think there is custom recovery and bootloader is now permalocked.
http://forum.xda-developers.com/showthread.php?t=2270191 has a link to the odin file and the root method in post 2 or 3 i believe.
Click to expand...
Click to collapse
Ok so is do i do the same thing as i was trying to flash or something like grab a kies file( the ones that take 2+ hours to download) and then flash or get to factory reset with the 4.3 file? if so do you know where i can grab a 4.3 update file to restore? please help me if you have skype or PM me? thanks
afextwin said:
You took the 4.3 update. You must now Odin to stock 4.3 to unbrick, do not Odin to any other (previous) version. There is a safe root method.
I do not think there is custom recovery and bootloader is now permalocked.
http://forum.xda-developers.com/showthread.php?t=2270191 has a link to the odin file and the root method in post 2 or 3 i believe.
Click to expand...
Click to collapse
I just recently ODIN flashed the latest 4.3 stock firmware for my TMO GS3 and then attempted to roll back to 4.1.2. It didn't brick my device, but it didn't work either. I would simply fail to install. I was able to reflash, through ODIN, the 4.3 stock firmware (actually used the root66 version). Then I was able to ODIN flash CWM recovery and install Dandroid 5.1, which is also a 4.3 based ROM. All is well now. I guess I simply can't go back to any previous 4.3 ROMs now, and I'm not sure about any AOSP ROMs. I may give a try at some point to see.
OK, so I just got a new LG G3 and I'm in the process of trying to reset my GS3.
Not long after I got the phone, I tried to root it (rather unsuccessfully). Didn't work out, so I restored to stock. Used the phone for the next 2 years or so with no issues.
Went to reset the phone and I got the unauthorized software warning.
I have now tried to restore to a stock ROM via ODIN V3.09 but I keep getting a fail at aboot.mbn.
What kind of information do you need to assist?
Thank you in advance!
Still searching the forum... still trying...
ODIN mode screen reads:
ODIN MODE
PRODUCT NAME: SCH-I535
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
BOOTLOADER AP SWREV: 2
I'm trying again but using this file this time:
androidfilehost.com/?fid=23501681358553154
OK, seems to be working perfectly now!
Much thanks to "BadUsername" for his diagnosis of the problem and providing a link to the correct tar ball!!!!
forum.xda-developers.com/showpost.php?p=54158110&postcount=242
Needing some help before i take my 2 day old S6 back to the shop with my tail between my legs!!
i have an unlocked SM-G920F bought from o2, and was trying to flash this rom http://forum.xda-developers.com/galaxy-s6/development/rom-tyrannus-rom-v1-0-31-07-2015-t3169760 . i've been flashing custom roms for as long as i can remember, and all the usual procedures were followed. all usb drivers are installed/updated etc. tried different ports/cables/odin versions
the problem basically started as soon as i tried flashing the bootloader and modem, odin came up with a pass, but when my phone restarted it showsSYSTEM REV. CHECK FAIL. DEVICE:2, BINARY:1
now, i can't get into recovery mode at all. i then tried flashing these stock roms (except the 5.0.2) from sam mobile http://www.sammobile.com/firmwares/database/SM-G920F/O2U/ using odin, but they all fail at NAND Write. i then also tried the emergency recovery option using smart switch, which also fails.
so now, all i can really do is boot into download mode and nothing else, odin recognises my phone, but doesnt write anything to it.
when im in download mode i get this display:
ODIN MODE
Product name: SM-G920F
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: OFF
Secure Download: ENABLED
KNOX warranty void 1 (0x0301)
RP SWREV: B:3 K:2 S:2
http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522
920-I unikernel v8,tyrannous rom
already looked there....mega download link is dead
anyone?
Im currently having the same issue here, im trying to flash a stock firmware to remove root and im not getting anywhere, if someone finds a way to fix it let me know pleas, im using the G920p from sprint
Good evening,
I am currently deciding whether or not this is actually fixable, i'm trying to help a friend out who soft bricked a SM-T820 Samsung S3 WIFI. Upon booting it goes direct to the bootloader with this error message:
ODIN: Flash read failure
ERROR: There is no pit binary.
RECOVERY BOOTING…
DLL: MMC_READ FAILED
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-T820
CURRENT BINARY: Secure Official
SYSTEM STATUS: Custom
FRP LOCK: OFF
OEM LOCK: ON
DID: 03ea98ebf9cf
WARRANTY VOID: 0xffffffff
QUALCOMM SECUREBOOT: ENABLE
SECURE DOWNLOAD: ENABLE
I have yet to get my hands on the tablet because they live out of province but I will be visiting soon. Based off the given information, is this considered fixable by chance with a re-flashed PIT File and system image. Just trying to get some ideas on the repair process before proceeding.
Thanks,
Axe
axehole said:
Good evening,
I am currently deciding whether or not this is actually fixable, i'm trying to help a friend out who soft bricked a SM-T820 Samsung S3 WIFI. Upon booting it goes direct to the bootloader with this error message:
ODIN: Flash read failure
ERROR: There is no pit binary.
RECOVERY BOOTING…
DLL: MMC_READ FAILED
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-T820
CURRENT BINARY: Secure Official
SYSTEM STATUS: Custom
FRP LOCK: OFF
OEM LOCK: ON
DID: 03ea98ebf9cf
WARRANTY VOID: 0xffffffff
QUALCOMM SECUREBOOT: ENABLE
SECURE DOWNLOAD: ENABLE
I have yet to get my hands on the tablet because they live out of province but I will be visiting soon. Based off the given information, is this considered fixable by chance with a re-flashed PIT File and system image. Just trying to get some ideas on the repair process before proceeding.
Thanks,
Axe
Click to expand...
Click to collapse
According to the info you have provided they were trying to/or did try to change the system files e.g: rooting
yes the partition is missed up so you will need a pit file with a full stock rom to flash.
yes, as you said you need a PIT file and a repairing frimware.
try with another cable also.
report back when you have a chance to see what we can do.
any PIT file for samsung galaxy tab s3 sm-t825
hello guys, i need your help.
would you please help me with something?
i try to upload 2 pics of my current phone and the status of my phone but im too young here
my question is if i can root it if oem unlock is not present in developer options even if i waited 7 days and set the clock back, try both options and nothing works
i only wanna delete everything from google (my experience is with galaxy s6) or if you can help me with a rom that is deodexed.
my phone is g955u
the error odin is giving me is:
CARRIET: ATT
RPMB fuseblown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
FRP LOCK: OFF
KG STATUS: CHECKING
WARRANTY VOID: 0x0
QUALCOM SERCUREBOOT: ENABLE
RP SWREV: B5(2,1,1,1,1) k4 s5
SECURE DOWNLOAD: ENABLE
DID: 205e94839b8d
SW REV CHECK FAIL: (abl) fused 5 > Binary 1
thank you very very much
cici_bb said:
hello guys, i need your help.
would you please help me with something?
i try to upload 2 pics of my current phone and the status of my phone but im too young here
my question is if i can root it if oem unlock is not present in developer options even if i waited 7 days and set the clock back, try both options and nothing works
i only wanna delete everything from google (my experience is with galaxy s6) or if you can help me with a rom that is deodexed.
my phone is g955u
the error odin is giving me is:
CARRIET: ATT
RPMB fuseblown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
FRP LOCK: OFF
KG STATUS: CHECKING
WARRANTY VOID: 0x0
QUALCOM SERCUREBOOT: ENABLE
RP SWREV: B5(2,1,1,1,1) k4 s5
SECURE DOWNLOAD: ENABLE
DID: 205e94839b8d
SW REV CHECK FAIL: (abl) fused 5 > Binary 1
thank you very very much
Click to expand...
Click to collapse
1. The U/U1 model's don't have the ability to have the OEM unlocked.
2. You are also try to down grade firmware.
3. For rooting solution see 8+ rom section and checkout thread's from jrkruse
https://forum.xda-developers.com/galaxy-s8+/development
spawnlives said:
1. The U/U1 model's don't have the ability to have the OEM unlocked.
2. You are also try to down grade firmware.
3. For rooting solution see 8+ rom section and checkout thread's from jrkruse
https://forum.xda-developers.com/galaxy-s8+/development
Click to expand...
Click to collapse
many many thanks sir.