[Completed] May have bricked s7 - XDA Assist

I have been reading all the posts and watching all the videos I can on the topic, I had a rooted s7, I wanted to return it to stock, downloaded the updated files from sammobile. I open Odin, select the files, throw the phone into download mode and connect, Odin fails... Everytime, doesn't matter which version of Odin I use or the files i use.... When i reset the phone, it goes to the software update fail screen and takes me to recovery. Any ideas or suggestions to try ?

Hi !
Have you checked this official thread , it may have your answer
https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039
Good luck !

Related

No OS installed, don't know what region of firmware to download

So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
You should check the Amazon listing to see which model number you have. It's probably SM-920F.
Once you have the correct firmware downloaded, Google a guide to flashing Galaxy S6 firmware with Odin. There are a lot of them out there.
krisztiana said:
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
Click to expand...
Click to collapse
On the back of the phone it should say which model you have, for example G920F, G920W8, G920P etc.
Download the proper firmware from Sammobile, then follow the tutorial that the following thread has a link to.
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
If the variant you have is the European model, G920F, I recomend you install the unbranded firmware.
IMPORTANT! MAKE SURE YOU HAVE THE PROPER FIRMWARE! INSTALLING THE WRONG FIRMWARE CAN HARD BRICK YOUR DEVICE!
I really hope this advice helped!
Really important is only that you pick the right model to download. The region isn't that important. Go to sammobile and download your stock rom, but be sure to not pick a branded one, because they are full of junk.
Also, you must use ODIN in that Download-Mode. Open ODIN, plug your device into your pc and see, if ODIN shows up your device. If yes, select "PDA" or "AP" (depending on ODIN Version) and select your ROM that you have downloaded. Then click on start. Don't touch your phone, your cable or your computer for best results. Wait ODIN say "PASS" with a green background. If this occurs, your phone should restart and after 10 mins or so, it should boot Android.
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
dwall87 said:
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
Click to expand...
Click to collapse
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
get the model number of your phone and flash the latest firmware through Odin
Milian90 said:
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
Click to expand...
Click to collapse
In odin under options untick Auto Reboot.
Flash Rom
Phone wont reboot once rom has flashed successfully so you will need to do manual reboot.
Go into recovery mode and wipe data.
Reboot phone
that should help let us know if it works
wifi wont turn on
hi, i managed to install the firmware but now the wifi and bluetooth wont turn on, wifi toggle and bluetooth wont go on, it looks like is trying toget on but after 20 seconds justgo back to off. idont know what to do .........
I can't even get any firmware to load as odin continually stops within seconds of starting to flash phone, no matter what firmware I choose it's the same result failed flash?

Bricked my mom's Galaxy Tab 2 7.0 (GT-P3100). Can't make it work. HELP PLEASE D:

Last night my mom asked me if I could format her tablet, because it was too slow (Even for that device), and had a lot of crap on it.
So... I took a look at it and started to google about the tablet. Turns out it hadn't been upgraded to the latest firmware; it was on Android 4.1.2, and as it says here: "sammobile.com/tag/gt-p3100/" the latest available firmware is 4.2.2 .
Thus I tried to update it via software update on the device, but it turned out it wasn't able to update because the tablet has been modified. Then I remembered that a long time ago I tried to root it without much success, but didn't try again because I got bored.
Then I downloaded the 4.2.2 firmware UK version (P3110XXDMH1_P3110OXADMH1_BTU), and flashed it via Odin. Sadly it went wrong and a "Failed!" sign appeared. I can't remember what step failed, but it booted anyways, but this time my PC recognized the device as a "GT-P3110". I thought that maybe it was because the UK firmware was a Vodafone version, so I downloaded the Russian brandless version (P3100XWDMK1_P3100SERDMK2_SER) and flashed; it failed again, but this time the tablet didn't turn on normally.
I can't boot it neither normally, recovery or Download mode, it shows only a message that says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again", which as I read on other android sites and this forum, it's a soft brick message.
Then I tried to do as it said, installed Kies and tried to fix what I've done, but when I enter the device data (Model and "S/N") it shows a message saying that the model info cannot be verified and that the device initialization can't continue.
imgur.com/Y89rnNg
imgur.com/OdZhT6C
So... This is as much info as I can remember about what could've gone wrong, please help me, if I can't fix it, mom will continue to be a liiiiittle too much angry
Beforehand thank you very much.
PS: I had to write wrong the links because I created this account just because I had this problem, so I can't post links.
Woah this happen to me once, but i try to flash it again and its work, this happen when i chose the wrong firmware zip, but it work when i instal the right one, maybe u flash wrong firmware bro, try flash the right rom bro
this message is like download mode, you can connect to pc and flash any firmware via odin
Yes, as said you can go in Download Mode and reflash another good ROM ! Make sure the .tar.md5 is not corrupted.

Note gt n8013 . Freezes after logo, can't go into recovery, and odin is not detecting

So I try to to use my tablet when this started. Now I read the fourm and alot of similar issue to mine, almost everyones note is recognized by odin. However mine is not even being recognized. It only makes the sound to charging noise that's it.
Only able to go into download mode.
Help anyone ?
Hi koc88158
Got a similar problem as yours around last week, had also tried searching the forum for answer, this was what i done from experience. But im just a noobie.
1. First time it happened, i reflash Stock recovery from Odin, and for some reason it got through, all files not deleted, root still there. Probably some bug happened.
2. 2nd time happened, i need to reflash stock recovery and Stock Firmware/ROm from Odin. Kinda hard to find a download link for a Stock ROM, i had try all link from threads here that had died. Try sammobile.com or samsung-updates.com . I got it from there here is for 8013
http://samsung-updates.com/device/?id=GT-N8013
3.3rd time happening, well i got a busted mother board, i can still access the custom recovery and Odin. But all above steps had failed because the MoBo is gone. Take it to samsung for a replacement and while there i ask to change the battery as well just in case. And you can ask to flash a stock firmware, but dont go straight away to 4.4.2 KitKat in case you want to do it yourself or Flashing a Custom Rom
Hope it helps. Good luck
Download PROPER DRIVERS. Usually they are downloaded by kies but sometimes, they don't work. In case of that, you have to download samsung drivers by yourself. I think you can find it in here or simply google it.
Here is an another issue with laptops that I also encountered: When you plug in, despite you having drivers, pc doesn't recognize it or constantly the device connects and disconnects every 2 seconds. In that case, you need to update your bios version. However, this case is not likely.(If you are not bad luck brian like me) So focus on driver installation.

[HELP] Samsung Galaxy 6 SM-G920T NO OS

First my phone was rooted before this but I tried to install XPOSED but it didint work it had me doing a bootloop so i thought about wiping my phone and didint think my OS would get erased now my phone just stays at the SAMSUNG GALAXY S6 screen I installed TWRP but no luck there people told me to install that but no luck I hope I can get some help ive tried to install stock firmware with odin but it keeps saying FAIL please help!
bump
Here are official firmwares for your device. Boot your device into download mode and connect your phone, it should show up in Odin, then select the file you downloaded from sammobile and flash it from there. If you get any errors, please post the log here and I'll take a look at it.

[Completed] s4 rooting issues (soft bricked?)

so, i was trying to root a verizon s4, there seem to be plenty of ways to do this.
i have odin 3.7 and 3.9 on my pc running windows 10(neither version fight with another)
anyway, i received a s4 that could not open the os. so i opted to try a root install. i opened odin 3.9 and dled a root rom for what i hoped was the right build... it failed.. ( yes i put the phone in to DL mode)
so, i DLed a different one, that failed to..
tried a third time, fail.
at this time after rebooting the phone, the screen tells me that "your device didnt update successfully. use the verizon repair assistant on a computer to repair your device and complete the update."
i DLed the windows version of verizons repair tool for samsung (i hope the right one, not sure as i had to search hard for it).
i ran the repair.. it spent an hr DLing, then started the repair. gets to 80% then fails.
i have tried this several times.. even restated my computer.
i cannot boot to recovery to reset to factory, which by the way was the first thing tried, but i can boot to DL mode.
i have read so many different things now, and tried different things that i am getting tunnel vision and cant focus anymore.. i need help please!
update
so i managed to get the phone working to boot the os by resetting the phone with a PIT file via odin.. i believe the build is of1? or something of that nature.. now just need to look int to rooting for that.
chewba17 said:
so i managed to get the phone working to boot the os by resetting the phone with a PIT file via odin.. i believe the build is of1? or something of that nature.. now just need to look int to rooting for that.
Click to expand...
Click to collapse
Greetings and welcome to assist. Glad you fixed your issue, flashing a pit file normally fixes issues like yours. There are a few videos here which should help you with your root
http://forum.xda-developers.com/showthread.php?t=2337590
Good Luck
Sawdoctor

Categories

Resources