So I try to to use my tablet when this started. Now I read the fourm and alot of similar issue to mine, almost everyones note is recognized by odin. However mine is not even being recognized. It only makes the sound to charging noise that's it.
Only able to go into download mode.
Help anyone ?
Hi koc88158
Got a similar problem as yours around last week, had also tried searching the forum for answer, this was what i done from experience. But im just a noobie.
1. First time it happened, i reflash Stock recovery from Odin, and for some reason it got through, all files not deleted, root still there. Probably some bug happened.
2. 2nd time happened, i need to reflash stock recovery and Stock Firmware/ROm from Odin. Kinda hard to find a download link for a Stock ROM, i had try all link from threads here that had died. Try sammobile.com or samsung-updates.com . I got it from there here is for 8013
http://samsung-updates.com/device/?id=GT-N8013
3.3rd time happening, well i got a busted mother board, i can still access the custom recovery and Odin. But all above steps had failed because the MoBo is gone. Take it to samsung for a replacement and while there i ask to change the battery as well just in case. And you can ask to flash a stock firmware, but dont go straight away to 4.4.2 KitKat in case you want to do it yourself or Flashing a Custom Rom
Hope it helps. Good luck
Download PROPER DRIVERS. Usually they are downloaded by kies but sometimes, they don't work. In case of that, you have to download samsung drivers by yourself. I think you can find it in here or simply google it.
Here is an another issue with laptops that I also encountered: When you plug in, despite you having drivers, pc doesn't recognize it or constantly the device connects and disconnects every 2 seconds. In that case, you need to update your bios version. However, this case is not likely.(If you are not bad luck brian like me) So focus on driver installation.
Related
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
http://support.t-mobile.com/docs/DOC-4484
Not your device but its should be similar. Hope it works for you.
No luck so far, is there no way to get past this screen?
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Sean_Seany said:
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Click to expand...
Click to collapse
No nothing, windows does recognize it and will install the driver. But Odin doesn't show anything happening and Kies just shows connecting. When you select emergency recovery in Kies it will stop trying to connect and bring up a dialog box asking for a recovery code. Apparently if the failure would have happened during a legit upgrade using Kies it would have generated an error code for recovery. Is there no way to repair this? Thought Samsung devices were suppose to be so easy to customize? Please help my son is pretty pissed.
Sent from my icrap 2 using Tapatalk HD
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
One thing. Always update your table with OTA or Kies. ODIN breaks the warrantie
Sent from my GT-P3110 using xda premium
Sweeeet ! Well played :good::good::good::good:
Same issue, different solution...
cruise350 said:
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
Click to expand...
Click to collapse
I bricked my device from Odin while trying to revert from a CM10.1 nightly to stock JB. Device picked up in Odin, but would not flash... unless I reboot the device after I clicked start in Odin. Dunno why, but it loaded stock firmware on the error screen... don' ask me how...
I have experienced this. Run ODIN, then connect your devices to the computer. When ODIN detect it, unplug and then replug your device. When ODIN back detect it then flash.
Recent versions of Odin work the other way around. First plug then open. Older like <1.87, first you open the program then you plug device. Glad it got solved.
Sent from my HTC One VX using xda premium
I have also hit this screen several times while playing with roms, this is a fairly common example of "softbrick". Fortunately for me, Odin had no problems connecting, and then simply flashed an oem rom. I have not been able to hard brick this thing, which is a huge surprise considering all the flashing I've done. Frankly I'm surprised it hasn't blown up like an iraqi IED yet lol!
This is a good thing! It means that Samsung built in a good failsafe. It just means you hosed your rom install all the way down to the bootloader. Easy to recover from
Glad ya learned to fix it!
Big problems with my Samsung Galaxy Tab 2 10.1
cruise350 said:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
Click to expand...
Click to collapse
Hi, my problem is identical. I have a samsung galaxy tab 2 10.1 and after a failed update with Odin the message was:Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I try again with Odin and nothing. I used Kies, and nothing. Then i saw a reference to the md5 philz_touch_5.03.7-p5110.tar.md5 and i use it with Odin. Sucess but the message was RESET. Everithing disappeared from screen except the battery logo. The tablet is always on and with that image. The volume buttons and power don't work and it is not detected.
I'm affraid the thing is bad.
Can you help? Thank you.
Djadomor
Hey cruise, would you happen to still have the file you used on your son's box? The only page I can find won't let me in.
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
You should check the Amazon listing to see which model number you have. It's probably SM-920F.
Once you have the correct firmware downloaded, Google a guide to flashing Galaxy S6 firmware with Odin. There are a lot of them out there.
krisztiana said:
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
Click to expand...
Click to collapse
On the back of the phone it should say which model you have, for example G920F, G920W8, G920P etc.
Download the proper firmware from Sammobile, then follow the tutorial that the following thread has a link to.
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
If the variant you have is the European model, G920F, I recomend you install the unbranded firmware.
IMPORTANT! MAKE SURE YOU HAVE THE PROPER FIRMWARE! INSTALLING THE WRONG FIRMWARE CAN HARD BRICK YOUR DEVICE!
I really hope this advice helped!
Really important is only that you pick the right model to download. The region isn't that important. Go to sammobile and download your stock rom, but be sure to not pick a branded one, because they are full of junk.
Also, you must use ODIN in that Download-Mode. Open ODIN, plug your device into your pc and see, if ODIN shows up your device. If yes, select "PDA" or "AP" (depending on ODIN Version) and select your ROM that you have downloaded. Then click on start. Don't touch your phone, your cable or your computer for best results. Wait ODIN say "PASS" with a green background. If this occurs, your phone should restart and after 10 mins or so, it should boot Android.
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
dwall87 said:
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
Click to expand...
Click to collapse
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
get the model number of your phone and flash the latest firmware through Odin
Milian90 said:
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
Click to expand...
Click to collapse
In odin under options untick Auto Reboot.
Flash Rom
Phone wont reboot once rom has flashed successfully so you will need to do manual reboot.
Go into recovery mode and wipe data.
Reboot phone
that should help let us know if it works
wifi wont turn on
hi, i managed to install the firmware but now the wifi and bluetooth wont turn on, wifi toggle and bluetooth wont go on, it looks like is trying toget on but after 20 seconds justgo back to off. idont know what to do .........
I can't even get any firmware to load as odin continually stops within seconds of starting to flash phone, no matter what firmware I choose it's the same result failed flash?
hy
First of all i want to say two things:
1. This thread was opened after reading 179 similar threads and browsed all 260 pages of q&a answers
on the galaxy tab 2 and other several threads on Samsung products with similar symptoms.
2. Thank you in advance to however is able to resolve this issues, not only for me, but for several others.
the section is full of similar problems with no answer whatsoever.
The story:
My Samsung p5110 WiFi only (stock firmware), started to restart randomly and at one point froze at the Samsung logo.
I was able to enter in download mode, and with odin i "managed" to load the firmware for p5100.
And that was the mistake. at restart started to display: “Firmware upgrade encountered an issue.
Please select recovery mode in Kies & try again“. But kies does not connect and recognize the device at all.
so out of the question to salvage the device in that mode.
Odin still recognizes the device, so i was able to load several stock firmwares:
P5110XXBLH4_P5110OXXBLH3_HOME.tar.md5
P5110XWALD4_P5110OXXALD5_HOME.tar.md5
P5110XXDNB1_P5110COADNB1_HOME.tar.md5
everything goes ok, it says pass, but there is no restarting, the screen goes black. when i turn it on
the same thing: "firmware upgrade.....
Tried to load CWM and TWRP recovery in order to delete everything in the device, installed ok but
no effect, it is not launching, only: "firmware upgrade....
I want to point out that USB mode was to enabled do to the fact that the tablet broke so it was not
planned, i have uninstalled kies and installed the samsung and omap drivers now, same results, and tried
all the usb ports.
I am running out of ideas and other suggestion i haven't found on this site up until now, so any
constructive help and comments will be welcomed by me and more than likely by the others in
my situation.
use odin in this way
blice said:
hy
First of all i want to say two things:
1. This thread was opened after reading 179 similar threads and browsed all 260 pages of q&a answers
on the galaxy tab 2 and other several threads on Samsung products with similar symptoms.
2. Thank you in advance to however is able to resolve this issues, not only for me, but for several others.
the section is full of similar problems with no answer whatsoever.
The story:
My Samsung p5110 WiFi only (stock firmware), started to restart randomly and at one point froze at the Samsung logo.
I was able to enter in download mode, and with odin i "managed" to load the firmware for p5100.
And that was the mistake. at restart started to display: “Firmware upgrade encountered an issue.
Please select recovery mode in Kies & try again“. But kies does not connect and recognize the device at all.
so out of the question to salvage the device in that mode.
Odin still recognizes the device, so i was able to load several stock firmwares:
P5110XXBLH4_P5110OXXBLH3_HOME.tar.md5
P5110XWALD4_P5110OXXALD5_HOME.tar.md5
P5110XXDNB1_P5110COADNB1_HOME.tar.md5
everything goes ok, it says pass, but there is no restarting, the screen goes black. when i turn it on
the same thing: "firmware upgrade.....
Tried to load CWM and TWRP recovery in order to delete everything in the device, installed ok but
no effect, it is not launching, only: "firmware upgrade....
I want to point out that USB mode was to enabled do to the fact that the tablet broke so it was not
planned, i have uninstalled kies and installed the samsung and omap drivers now, same results, and tried
all the usb ports.
I am running out of ideas and other suggestion i haven't found on this site up until now, so any
constructive help and comments will be welcomed by me and more than likely by the others in
my situation.
Click to expand...
Click to collapse
well i had the same problem with my GT-P3113
there is one way i know to solve this which worked for me.
1. flash TWRP/CWM
a)first make sure that you find the rooted md5 firmware for your device.
[this is my 5th post so i cannot add links. so you can always search in xda for other threads regarding your device's rooted md5 so that you can flash using odin.]
b)now flash the rooted md5 using odin
c) flash TWRP/CWM Using odin(i would prefer CWM)
d)then downlaod a custom rom for your device and place it in your sd card.
e)flash it using your recovery
f)now try rebooting and you should go into the new rom
g)now check usb debugging in the settings>about device>touch on build number 7 times>you will see developer options>check usb debugging.
h)now try flashing the original stock firmware using odin
CONGRATS YOU HAVE SOLVED THE PROBLEM OF YOUR DEVICE
NOTE:if you still have any problem with booting or if you are stuck in the boot logo try going to recovery and do a factory reset.
if still you have any questions let me know.
Similar problem but odin doesn't recognise device
Hello guys. I have big issue with this. I tried also flashing from sd new cwm since its factory but it start process and than say signature verification failed. Trying also different roms but no success. I can not do basically anything. Even for sdk tool computer must recognise device (I do have drivers and they work with all other devices ) and still it doesn't recognise. I am out of options. Please help?
Hello,
I had the same problem with my tab 2..I solved it the same way in this video..
Here's the link: http://m.youtube.com/watch?v=0NXBN9Z63TY
---------- Post added at 06:59 PM ---------- Previous post was at 06:55 PM ----------
If this didnt work out you can flash a custom rom through cwm.
Here try this rom.
http://download.mokeedev.com/?device=p5110
If still any problem persists pls send me a message.
Last night my mom asked me if I could format her tablet, because it was too slow (Even for that device), and had a lot of crap on it.
So... I took a look at it and started to google about the tablet. Turns out it hadn't been upgraded to the latest firmware; it was on Android 4.1.2, and as it says here: "sammobile.com/tag/gt-p3100/" the latest available firmware is 4.2.2 .
Thus I tried to update it via software update on the device, but it turned out it wasn't able to update because the tablet has been modified. Then I remembered that a long time ago I tried to root it without much success, but didn't try again because I got bored.
Then I downloaded the 4.2.2 firmware UK version (P3110XXDMH1_P3110OXADMH1_BTU), and flashed it via Odin. Sadly it went wrong and a "Failed!" sign appeared. I can't remember what step failed, but it booted anyways, but this time my PC recognized the device as a "GT-P3110". I thought that maybe it was because the UK firmware was a Vodafone version, so I downloaded the Russian brandless version (P3100XWDMK1_P3100SERDMK2_SER) and flashed; it failed again, but this time the tablet didn't turn on normally.
I can't boot it neither normally, recovery or Download mode, it shows only a message that says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again", which as I read on other android sites and this forum, it's a soft brick message.
Then I tried to do as it said, installed Kies and tried to fix what I've done, but when I enter the device data (Model and "S/N") it shows a message saying that the model info cannot be verified and that the device initialization can't continue.
imgur.com/Y89rnNg
imgur.com/OdZhT6C
So... This is as much info as I can remember about what could've gone wrong, please help me, if I can't fix it, mom will continue to be a liiiiittle too much angry
Beforehand thank you very much.
PS: I had to write wrong the links because I created this account just because I had this problem, so I can't post links.
Woah this happen to me once, but i try to flash it again and its work, this happen when i chose the wrong firmware zip, but it work when i instal the right one, maybe u flash wrong firmware bro, try flash the right rom bro
this message is like download mode, you can connect to pc and flash any firmware via odin
Yes, as said you can go in Download Mode and reflash another good ROM ! Make sure the .tar.md5 is not corrupted.
so, i was trying to root a verizon s4, there seem to be plenty of ways to do this.
i have odin 3.7 and 3.9 on my pc running windows 10(neither version fight with another)
anyway, i received a s4 that could not open the os. so i opted to try a root install. i opened odin 3.9 and dled a root rom for what i hoped was the right build... it failed.. ( yes i put the phone in to DL mode)
so, i DLed a different one, that failed to..
tried a third time, fail.
at this time after rebooting the phone, the screen tells me that "your device didnt update successfully. use the verizon repair assistant on a computer to repair your device and complete the update."
i DLed the windows version of verizons repair tool for samsung (i hope the right one, not sure as i had to search hard for it).
i ran the repair.. it spent an hr DLing, then started the repair. gets to 80% then fails.
i have tried this several times.. even restated my computer.
i cannot boot to recovery to reset to factory, which by the way was the first thing tried, but i can boot to DL mode.
i have read so many different things now, and tried different things that i am getting tunnel vision and cant focus anymore.. i need help please!
update
so i managed to get the phone working to boot the os by resetting the phone with a PIT file via odin.. i believe the build is of1? or something of that nature.. now just need to look int to rooting for that.
chewba17 said:
so i managed to get the phone working to boot the os by resetting the phone with a PIT file via odin.. i believe the build is of1? or something of that nature.. now just need to look int to rooting for that.
Click to expand...
Click to collapse
Greetings and welcome to assist. Glad you fixed your issue, flashing a pit file normally fixes issues like yours. There are a few videos here which should help you with your root
http://forum.xda-developers.com/showthread.php?t=2337590
Good Luck
Sawdoctor