I have G920F phone with united arab emirates firmware G920FxxUD4PK1,
I try to change to PHE-G920FXXS4DPJ2, but i cant do it, i downdload with samfirm.
I try this change with odin 3.12 but fail all time.
How i can do it?
I think you have newer bootloader than firmware you try to install. If so, you can't do it.
punktnet said:
I think you have newer bootloader than firmware you try to install. If so, you can't do it.
Click to expand...
Click to collapse
Then i cant change it? or could change the bootloader to older version?
Download it with "Binary Nature" option.
Then, flash the 4 file via Odin.
i try too this option, only i can flash firmware from csc: XSG, i dont understand this.
I try flash two differents firmware from PHE, but appear SW device error and odin fail, then i flash XSG to recovery phone.
Any options?
Related
Had issue with my note 3
But fixed finally
1/step: dowloand single csc firmware, example 3 ireland has single csc perfect for this issue.
2/step: install 3 ireland firmware via odin.
3/step: after finishing full wipe resetting the device
Complete full setup and finish everything
4/step: than download btu firmware and instal via odin
Wait for finish then when you see first samsung logo on the screen pull out the battery wait for 5to10 second then put batery back and start with recovery mode and fully reset the device
Then boot device normally, you'll have btu csc on the device
1980aksoy said:
Had issue with my note 3
But fixed finally
1/step: dowloand single csc firmware, example 3 ireland has single csc perfect for this issue.
2/step: install 3 ireland firmware via odin.
3/step: after finishing full wipe resetting the device
Complete full setup and finish everything
4/step: than download btu firmware and instal via odin
Wait for finish then when you see first samsung logo on the screen pull out the battery wait for 5to10 second then put batery back and start with recovery mode and fully reset the device
Then boot device normally, you'll have btu csc on the device
Click to expand...
Click to collapse
If you read other post is another simple way.You flash Singapore NB4 wipe factory reset,wipe cache than flash BTU NB7 wipe factory reset,wipe cache and you have newer firmware and BTU CSC.NO NEED pull out batery or everything else.
orly_mihai said:
If you read other post is another simple way.You flash Singapore NB4 wipe factory reset,wipe cache than flash BTU NB7 wipe factory reset,wipe cache and you have newer firmware and BTU CSC.NO NEED pull out batery or everything else.
Click to expand...
Click to collapse
I never pull and put the batery. Is for what that????????????
I've got a non rooted N9005, originally ITV csc. I flashed NB3 Poland and now NB7 BTU. If I do a *#1234# I've got CSC: N9005OXAENB1.
If I go to stock recovery it says "Successfully applied ITV CSC".
If I want to get the original ITV CSC do I need to do something else?
GDT said:
I've got a non rooted N9005, originally ITV csc. I flashed NB3 Poland and now NB7 BTU. If I do a *#1234# I've got CSC: N9005OXAENB1.
If I go to stock recovery it says "Successfully applied ITV CSC".
If I want to get the original ITV CSC do I need to do something else?
Click to expand...
Click to collapse
I used a free tool from the play store to check mine, called Samsung Phone Info. This will tell you what CSC you have applied.
zomig said:
I used a free tool from the play store to check mine, called Samsung Phone Info. This will tell you what CSC you have applied.
Click to expand...
Click to collapse
It says ITV. I think it should be right.
GDT said:
I've got a non rooted N9005, originally ITV csc. I flashed NB3 Poland and now NB7 BTU. If I do a *#1234# I've got CSC: N9005OXAENB1.
If I go to stock recovery it says "Successfully applied ITV CSC".
If I want to get the original ITV CSC do I need to do something else?
Click to expand...
Click to collapse
"Successfully applied ITV CSC" mean You have by default ITV from Your Rom before on file /efs/imei/mps_code dat. Is from here the csc is applied by Stock Recovery where it need.
On this file /mps_code.dat is installed the CSC by default from all Clean install Roms (full wiped before).
Then, You installed the NB7 BTU Rom, but this Rom have also the ITV. This CSC is installed well because Your default ITV on /mps_code.dat.
To see this file only whit root but You can read this : http://forum.xda-developers.com/showthread.php?t=2670084
Your Rom are well, not worry.
---------- Post added at 11:16 AM ---------- Previous post was at 11:08 AM ----------
To Italian Members.
If have Your Rom XXUENB7 BTU whit BTU by default and You have BTU but not Your ITV csc You can flash my Mod csc ITV on customer recovery.
See it here : http://forum.xda-developers.com/showthread.php?t=2666907 Post #2.
ValenteL said:
I never pull and put the batery. Is for what that????????????
Click to expand...
Click to collapse
I never pull out batery and that was trying to explain to the man there is a simple way.
orly_mihai said:
I never pull out batery and that was trying to explain to the man there is a simple way.
Click to expand...
Click to collapse
Good. Sorry. I understand.
Hi, first flashed french 5.1.1 and now that vodafone has released the branded 5.1.1 want to back to stock (ATL) but when flash the sammobile package the csc changes to SIM (vodafone slovenia) and there´s no way to change the csc.
I´ve reading a lot and seems the ATL package is multicsc and flashing defaults to SIM. and there´s no possibility to change csc because cant root 5.1.1
Im totally stuck. Why want the branded? the operator customization and VoLTE activation.
Thanks to all
Do a factory reset in the bootloader, boot up and then flash the operator rom again
*#272*IMEI#
Tried flashing, boot, wipeall twice, flashing wipe data and cache but the multicsc stays as SIM csc...
*#272.... doesnt work in this devices.
tried to downgrade to 5.0.2 and root to change manually csc but the bootloader is upgraded keeping downgrades.
the only hope is pingpongroot or anyone can root 5.1.1 without tripping knox
Bring your S6 back to Samsung for official ROM flashing back to stock.
Only way to change CSC is to root...
roydok said:
Only way to change CSC is to root...
Click to expand...
Click to collapse
Not true. I did it several times on unrooted stock devices.
godutch said:
Not true. I did it several times on unrooted stock devices.
Click to expand...
Click to collapse
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
Did you let the phone boot completely after flashing the new firmware and then do the wipe from recovery?
Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).
roydok said:
Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).
Click to expand...
Click to collapse
You could try without a simcard (flash, boot up, wipe in recovery) or a different simcard. I never manage to change csc either in 1 go and the results can be different, eg sometimes I get Vodafone apps installed and sometimes not....
Will try it without a SIM card. Thanks.
roydok said:
Will try it without a SIM card. Thanks.
Click to expand...
Click to collapse
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK
greenredblue said:
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK
Click to expand...
Click to collapse
I also tried it but couldn't get it to the correct CSC (VDF in my case) either, I can do it with other packages and get it to PHN (dutch)
roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.
tiborprogmed said:
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.
Click to expand...
Click to collapse
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
i have flashed the XEF. and that was wrong. esspecially it broke the spo2, and stress measuring... I would go back to another, BUT after XEF, I always had flashing interrupt in the HIDDEN file stage.
But after I have found a flashable FW again ( maybe SER or SEB) I was able to flash XEH, or BTU. and it was changing the XEF to SEB OR SER after wipe in recovery.
The only rom I will never flash againt is XEF.
ps: i never root this 920F
greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
Now I was able to reproduce it twice!!! :
How it works : on devices where dialer NOT shown up CSC changer (e.g.: GS6920F) :
Go to recovery, Dial up, Home + Power
wipe cache and perform a factory reset
next is important : power down the phone. NOT to reboot.
Power on in download mode: volume down+home+power buttons
FLASH for example : BTU :
G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar
after reboot, it will be English, and If U go to recovery it will apply BTU.
Hope it helps
p.s.: It wont works with EVERY Firmware. don't know WHY. For example :
I wanted to flash after succesfully changed the CSC from TPH to BTU, so I wanted to flash XEH....BUT that resets to TPH after XEH flash.
So at least to BTU it works specially if you are in TPH CSC !
Hiya,
How do I install the newest firmware from Samsung with live recording etc on my SM-G920F newest dutch 5.1.1 (without live recording and better ram management)
I dont want to trip Knox.
I heard it was somerhing with flashing France firmware but I dont know if thats true.
www.google.com
You should here and click download France or Russia COH2 Firmware, then download the latest Odin (Version 3.10.6) and then boot your phone into download mode, unzip the software and then open Odin 3.10.6, click 'AP', make sure in the Odin options menu, Re-Partition, nand erase all, flash lock and T flash are not selected. After Odin verifies the firmware, you can click start to flash the firmware.
Hello,
Is it possible to downgrade from Nougat back to Marshmellow without triggering Knox ?
I upgraded my S7 via OTA Update. Now i have big trouble with the GPS indoors while playing Pokemon Go. The location via wifi seems messed up in 7.0. On 6.0.1 i never had problems.
Can i just flash the latest 6.0.1 (G930FDBT1BPH2) via Odin ? Or can there be a problem with the Bootloader which could be upgraded during the 7.0 Update ?
Does this procedure trigger Knox ? I want to keep the phone on Stock Firmware without rooting oder custom Firmware.
I downloaded the 6.0.1 from updateo with the following files :
AP_G930FXXU1BPLB_CL9689434_QB11912457_REV00_user_low_ship.tar.md5
BL_G930FXXU1BPLB_CL9689434_QB11912457_REV00_user_low_ship.tar.md5
CP_G930FXXU1BPJJ_CL9519568_QB11350220_REV00_user_low_ship.tar.md5
CSC_DBT_G930FDBT1BPH2_CL8887037_QB10698583_REV00_user_low_ship.tar.md5
HOME_CSC_DBT_G930FDBT1BPH2_CL8887037_QB10698583_REV00_user_low_ship.tar.md5
Can i just fire up Odin and put these files according the first letters in the fields ?
Greetings,
Chris
Yea just flash with ODIN
CSC = Reset (You'll need to choose this one to downgrade as 7.0 apps are not compatible with 6.0)
HOME_CSC = No reset
Only flashing custom will trip knox, flashing stock with ODIN will not trip it
*Detection* said:
Yea just flash with ODIN
CSC = Reset (You'll need to choose this one to downgrade as 7.0 apps are not compatible with 6.0)
HOME_CSC = No reset
Only flashing custom will trip knox, flashing stock with ODIN will not trip it
Click to expand...
Click to collapse
Thank you
Just for my safety
I need the first 4 files. Put em into the 4 fields in Odin 3.11.1 including BL - Bootloader (This part ist the most fear for me ) and flash them with "F-Reset Time" and "Auto Reboot" selected ?
After rebooting the phone a Full wipe is a good thing, i think.
chr2002 said:
Thank you
Just for my safety
I need the first 4 files. Put em into the 4 fields in Odin 3.11.1 including BL - Bootloader (This part ist the most fear for me ) and flash them with "F-Reset Time" and "Auto Reboot" selected ?
After rebooting the phone a Full wipe is a good thing, i think.
Click to expand...
Click to collapse
Use ODIN 3.12.3 or newer, that version is too old
3.12.7
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Flash AP, BL, CP and CSC
The phone will automatically factory reset after the flash so no need to wipe again
DO NOT change anything in ODIN, leave everything as it is
*Detection* said:
Use ODIN 3.12.3 or newer, that version is too old
3.12.7
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Flash AP, BL, CP and CSC
The phone will automatically factory reset after the flash so no need to wipe again
DO NOT change anything in ODIN, leave everything as it is
Click to expand...
Click to collapse
Thank you for your Help. I´ll do it exact this way
Hello I am very new to this and like to know if i can downgrade too from android 7 if there is a security path already applied to the phone? Can I also just flash it with Odin stock rom?
Do I need the exact build number or just model number? And does model number needs to be the same so I got SM g930v? Can I flash from different country that is not G930V but G930F
And would the PDA number also need to match? Thanks for helping!
Silkwormgirl said:
Hello I am very new to this and like to know if i can downgrade too from android 7 if there is a security path already applied to the phone? Can I also just flash it with Odin stock rom?
Do I need the exact build number or just model number? And does model number needs to be the same so I got SM g930v? Can I flash from different country that is not G930V but G930F
And would the PDA number also need to match? Thanks for helping![/QUOTE
You cannot flash a G930F firmware on a G930V device. They have different hardware. You need to flash G930V firmware
Click to expand...
Click to collapse
thank you can you tell me why it needs the exact same model number when the phone is still the same S7?
1. how about PDA will i need that the long build number will that needs to be the same?
2. I will need to flash the same model number to root it? And not a different model number?
Thanks!
Silkwormgirl said:
Hello I am very new to this and like to know if i can downgrade too from android 7 if there is a security path already applied to the phone? Can I also just flash it with Odin stock rom?
Do I need the exact build number or just model number? And does model number needs to be the same so I got SM g930v? Can I flash from different country that is not G930V but G930F
And would the PDA number also need to match? Thanks for helping![/QUOTE
You cannot flash a G930F firmware on a G930V device. They have different hardware. You need to flash G930V firmware
Click to expand...
Click to collapse
mrao said:
You cannot flash a G930F firmware on a G930V device. They have different hardware. You need to flash G930V firmware
Click to expand...
Click to collapse
Can you explain why the hardware is different?
And with Flashing using ODIN do I only need the model number and nothing else?
Silkwormgirl said:
Can you explain why the hardware is different?
And with Flashing using ODIN do I only need the model number and nothing else?
Click to expand...
Click to collapse
The USA variants use a qualcomm chipper, the G930F (international model) uses an exynos chipper. You will end up bricking it by trying to flash incompatible firmware
Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!
Gisar said:
Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!
Click to expand...
Click to collapse
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU
*Detection* said:
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU
Click to expand...
Click to collapse
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)
Gisar said:
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)
Click to expand...
Click to collapse
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo
*Detection* said:
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo
Click to expand...
Click to collapse
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!
Gisar said:
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!
Click to expand...
Click to collapse
Exactly the same as XEO is also included in the BTU CSC
*Detection* said:
Exactly the same as XEO is also included in the BTU CSC[/QUOTE
What about flashing the same firmware with odin 3.13.1, but with ticked repartition in the option? This, regarding the comments in sammobile forum works. But for me doesn't. Maybe for Oreo it doesn't work or there is something specifically to do?
I can't catch your proposal for flashing the other firmware. Can you tell me which exactly firmware I have to flash first, later on to receive BTU Oreo CSC as default?
Click to expand...
Click to collapse
When I flash first MTL CSC android 7 and then flash oreo BTU, will it change my CSC code from XEO to BTU?