Database Info

[Q] How to change CSC to branded 920F

Hi, first flashed french 5.1.1 and now that vodafone has released the branded 5.1.1 want to back to stock (ATL) but when flash the sammobile package the csc changes to SIM (vodafone slovenia) and there´s no way to change the csc.
I´ve reading a lot and seems the ATL package is multicsc and flashing defaults to SIM. and there´s no possibility to change csc because cant root 5.1.1
Im totally stuck. Why want the branded? the operator customization and VoLTE activation.
Thanks to all

Do a factory reset in the bootloader, boot up and then flash the operator rom again

*#272*IMEI#

Tried flashing, boot, wipeall twice, flashing wipe data and cache but the multicsc stays as SIM csc...
*#272.... doesnt work in this devices.
tried to downgrade to 5.0.2 and root to change manually csc but the bootloader is upgraded keeping downgrades.
the only hope is pingpongroot or anyone can root 5.1.1 without tripping knox

Bring your S6 back to Samsung for official ROM flashing back to stock.

Only way to change CSC is to root...

roydok said:
Only way to change CSC is to root...
Click to expand...
Click to collapse
Not true. I did it several times on unrooted stock devices.

godutch said:
Not true. I did it several times on unrooted stock devices.
Click to expand...
Click to collapse
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.

roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
Did you let the phone boot completely after flashing the new firmware and then do the wipe from recovery?

Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).

roydok said:
Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).
Click to expand...
Click to collapse
You could try without a simcard (flash, boot up, wipe in recovery) or a different simcard. I never manage to change csc either in 1 go and the results can be different, eg sometimes I get Vodafone apps installed and sometimes not....

Will try it without a SIM card. Thanks.

roydok said:
Will try it without a SIM card. Thanks.
Click to expand...
Click to collapse
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK

greenredblue said:
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK
Click to expand...
Click to collapse
I also tried it but couldn't get it to the correct CSC (VDF in my case) either, I can do it with other packages and get it to PHN (dutch)

roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.

tiborprogmed said:
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.
Click to expand...
Click to collapse
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?

greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
i have flashed the XEF. and that was wrong. esspecially it broke the spo2, and stress measuring... I would go back to another, BUT after XEF, I always had flashing interrupt in the HIDDEN file stage.
But after I have found a flashable FW again ( maybe SER or SEB) I was able to flash XEH, or BTU. and it was changing the XEF to SEB OR SER after wipe in recovery.
The only rom I will never flash againt is XEF.
ps: i never root this 920F

greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
Now I was able to reproduce it twice!!! :
How it works : on devices where dialer NOT shown up CSC changer (e.g.: GS6920F) :
Go to recovery, Dial up, Home + Power
wipe cache and perform a factory reset
next is important : power down the phone. NOT to reboot.
Power on in download mode: volume down+home+power buttons
FLASH for example : BTU :
G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar
after reboot, it will be English, and If U go to recovery it will apply BTU.
Hope it helps
p.s.: It wont works with EVERY Firmware. don't know WHY. For example :
I wanted to flash after succesfully changed the CSC from TPH to BTU, so I wanted to flash XEH....BUT that resets to TPH after XEH flash.
So at least to BTU it works specially if you are in TPH CSC !

Odin stock firmware didn't completely wipe data

I had recently flashed the DBT (German) firmware because it had the October update. Immediately after I did that, I started having problems with my VOIP app I need for work so I flashed the old BTU firmware back. After flashing, I noticed German was selected as the default language in the startup prompts, the "MeinGalaxy" app was still installed, and the Samsung Phone Info app reported my CSC as DBT (even though it reported the CSC firmware as the BTU version I just flashed.)
Pretty confused as to how this could happen. I just flashed TWRP, wiped everything, then flashed the BTU firmware through Odin again.
EDIT: It did it again! Where the hell is this old CSC data hiding? I just formatted the data and system partition. Wiped everything but my SD card. About to take the SD card out just in case but this is weird...

Flashing with ODIN does not factory reset your phone. Just boot into recovery and do the factory reset afterwards.

arnes_king said:
Flashing with ODIN does not factory reset your phone. Just boot into recovery and do the factory reset afterwards.
Click to expand...
Click to collapse
I just did. Wiped everything with TWRP, re-flashed with Odin and this German crap is still on here. Maybe it's in the Android folder on my SD card is all I can think. About to format that too and pull it out.

I just re-wiped from TWRP again, re-flashed through Odin, did a factory reset from inside Android, then booted to stock recovery and did a factory reset there. I'm still on the damn German CSC. Even stock recovery said something about multi-csc: DBT when I booted into it.
How does this even happen? Where does CSC live that nothing seems to wipe it?

weirddan455 said:
I just re-wiped from TWRP again, re-flashed through Odin, did a factory reset from inside Android, then booted to stock recovery and did a factory reset there. I'm still on the damn German CSC. Even stock recovery said something about multi-csc: DBT when I booted into it.
How does this even happen? Where does CSC live that nothing seems to wipe it?
Click to expand...
Click to collapse
Maybe you have downloaded a firmware which includes that bloatware. Download and flash a new unbranded firmware.

arnes_king said:
Maybe you have downloaded a firmware which includes that bloatware. Download and flash a new unbranded firmware.
Click to expand...
Click to collapse
It is unbranded. BTU downloaded from updato.com. I had flashed it previously (before I flashed the German firmware with October security update) and it didn't come with this software. Also, it just doesn't make sense that stock recovery and Samsung Phone Info app are showing German CSC code.

Actually, just saw in the Samsung Phone Info app that this BTU firmware is multi-CSC. I tried to change it but it needed to factory reset and TWRP couldn't do it because the device is encrypted. I still don't understand where it's stored to default to DBT (Germany) instead of BTU (UK.) Last time I flashed this firmware, I got BTU but ever since I flashed DBT, that setting seems to have stuck.

Did you already try re-flashing without SD card in?
I remember, in my Note 4 days, I had the same problem. Flashed several times new unbranded FW, but without the CSC changing.
Then when I flashed without inserted SD card it worked and I got the new CSC.
Might be coincidence, might have a reason, I really don't know...

You could do it in settings, TWRP or there should be a option in Odin (not 100% sure)

weirddan455 said:
Actually, just saw in the Samsung Phone Info app that this BTU firmware is multi-CSC. I tried to change it but it needed to factory reset and TWRP couldn't do it because the device is encrypted. I still don't understand where it's stored to default to DBT (Germany) instead of BTU (UK.) Last time I flashed this firmware, I got BTU but ever since I flashed DBT, that setting seems to have stuck.
Click to expand...
Click to collapse
Did you ever get this fixed? I'm having the exact same issue....

hansgraff said:
Did you ever get this fixed? I'm having the exact same issue....
Click to expand...
Click to collapse
I just flashed Turkey firmware and got XSG instead (another Multi-CSC ROM with like 20 different CSC codes.) Pretty sure you will need root to change it and there should be apps available. I know there is a CSC selector zip in the Roms section that will let you put flash any CSC even if it doesn't come on your ROM.
The CSC data is in /system/csc. You can see everything that comes in a multi-csc ROM. I'm pretty sure you need to change files in there to select which one it uses. /system/csc/sales_code.dat is a text file that tells you what you are currently using.
EDIT: Found instructions on how to change CSC in multi-CSC ROM on Note 4 but was linked to on top post of S7 CSC Selector tool: http://forum.xda-developers.com/note-4/help/guide-to-change-csc-root-rom-multi-csc-t3017207

Did you finally get yours fixed? I had forgotten to do a reboot and cache flash which once completed fixed mine.
weirddan455 said:
I just flashed Turkey firmware and got XSG instead (another Multi-CSC ROM with like 20 different CSC codes.) Pretty sure you will need root to change it and there should be apps available. I know there is a CSC selector zip in the Roms section that will let you put flash any CSC even if it doesn't come on your ROM.
The CSC data is in /system/csc. You can see everything that comes in a multi-csc ROM. I'm pretty sure you need to change files in there to select which one it uses. /system/csc/sales_code.dat is a text file that tells you what you are currently using.
EDIT: Found instructions on how to change CSC in multi-CSC ROM on Note 4 but was linked to on top post of S7 CSC Selector tool: http://forum.xda-developers.com/note-4/help/guide-to-change-csc-root-rom-multi-csc-t3017207
Click to expand...
Click to collapse

CSC empty (multi csc) after flashing firmware with odin

HI.
I have 935F I bought with the CSC TPA.
I flashed a new firmware with another CSC, and now the CSC of my phone is empty (Recovery says multi-csc).
I flashed via odin AP. Do I need also to flash the CSC file in odin?
What is the solution to get the new CSC?
Thanks!

tal_be said:
HI.
I have 935F I bought with the CSC TPA.
I flashed a new firmware with another CSC, and now the CSC of my phone is empty (Recovery says multi-csc).
I flashed via odin AP. Do I need also to flash the CSC file in odin?
What is the solution to get the new CSC?
Thanks!
Click to expand...
Click to collapse
Hi
what files did you flash? all 4 files?
What did you use home_csc or CSC

I do also have the same doubt. If a flash a BTU firmware over a ZTO one, will I be able to get my csc back to ZTO without root?

MAX 404 said:
Hi
what files did you flash? all 4 files?
What did you use home_csc or CSC
Click to expand...
Click to collapse
I flashed only the AP file. Should I use also the CSC file?

nanca said:
I do also have the same doubt. If a flash a BTU firmware over a ZTO one, will I be able to get my csc back to ZTO without root?
Click to expand...
Click to collapse
tal_be said:
I flashed only the AP file. Should I use also the CSC file?
Click to expand...
Click to collapse
Hi mates
You can change from one csc to another without problem , root is no need but when changing CSC you will factory reset your phone , if you keep same csc you can upgrade firmware without factory reset ( no data loss) when you keep the same csc you use home_csc file ( odin flashing) . if you change CSC , you need to flash the CSC file ( this will factory reset your phone.
@tal_be yes you do, actually is recommended to flash all four files
Check this thread

MAX 404 said:
Hi mates
You can change from one csc to another without problem , root is no need but when changing CSC you will factory reset your phone , if you keep same csc you can upgrade firmware without factory reset ( no data loss) when you keep the same csc you use home_csc file ( odin flashing) . if you change CSC , you need to flash the CSC file ( this will factory reset your phone.
@tal_be yes you do, actually is recommended to flash all four files
Check this thread
Click to expand...
Click to collapse
Can I Flash only the AP and CSC files?

Hi I got the same problem. I flashed all 4 files (CSC no home_CSC), and "original CSC code" is empty, active csc is XEF, and available csc are multiple. I flashed BTU but it stil XEF.

tal_be said:
Can I Flash only the AP and CSC files?
Click to expand...
Click to collapse
Yes you can....but as i said recommended is the four of them
---------- Post added at 07:55 AM ---------- Previous post was at 07:37 AM ----------
wolkowicz said:
Hi I got the same problem. I flashed all 4 files (CSC no home_CSC), and "original CSC code" is empty, active csc is XEF, and available csc are multiple. I flashed BTU but it stil XEF.
Click to expand...
Click to collapse
Hi mate
I should had changed m BTU is a single csc firmware , where did you get the firmware from , no errors during odin flashing??

MAX 404 said:
Yes you can....but as i said recommended is the four of them
---------- Post added at 07:55 AM ---------- Previous post was at 07:37 AM ----------
Hi mate
I should had changed m BTU is a single csc firmware , where did you get the firmware from , no errors during odin flashing??
Click to expand...
Click to collapse
I download frimware from sammobile.com. Try two times, both successful without any errors. Even after flash new rom when I choosing language there is french as first not english.

wolkowicz said:
I download frimware from sammobile.com. Try two times, both successful without any errors. Even after flash new rom when I choosing language there is french as first not english.
Click to expand...
Click to collapse
and you are using CSC not home_csc file right? also latest odin version..

MAX 404 said:
and you are using CSC not home_csc file right? also latest odin version..
Click to expand...
Click to collapse
Yes and yes. Odin 3.12.3
I have done same thing last year on S6 (from TPL to BTU) and there were no problems. But this is strange.

wolkowicz said:
Yes and yes. Odin 3.12.3
I have done same thing last year on S6 (from TPL to BTU) and there were no problems. But this is strange.
Click to expand...
Click to collapse
It really is....try a different single CSC firmware ( other than BTU) see if it change and if it does try again with BTU

wolkowicz said:
Hi I got the same problem. I flashed all 4 files (CSC no home_CSC), and "original CSC code" is empty, active csc is XEF, and available csc are multiple. I flashed BTU but it stil XEF.
Click to expand...
Click to collapse
Original csc code requires root.
Sent from my SM-G930F using Tapatalk

Question using AP,BL,CSC instead of Home

Hi I usually download from sammobile where they have one file and I select ap it does everything itself. However I have downloaded from updato website it has given loads of small files like ap, bl, csc.. Do I use all them for the upgrade on odin or can I just up the ap?
the files are like the following: BL_G935FXXU1DQB3_CL10422490_QB12410567_REV00_user_low_ship.tar
my version on my current phone is g935fxxu1bplb
Thanks

waqas11 said:
Hi I usually download from sammobile where they have one file and I select ap it does everything itself. However I have downloaded from updato website it has given loads of small files like ap, bl, csc.. Do I use all them for the upgrade on odin or can I just up the ap?
the files are like the following: BL_G935FXXU1DQB3_CL10422490_QB12410567_REV00_user_low_ship.tar
my version on my current phone is g935fxxu1bplb
Thanks
Click to expand...
Click to collapse
Do NOT select the regular CSC file that starts with CSC in its name, as that would replace your CSC and thus would result in a factory data reset of the device.
Click on CSC tab and select the firmware file starting with HOME_CSC in its name

waqas11 said:
Hi I usually download from sammobile where they have one file and I select ap it does everything itself. However I have downloaded from updato website it has given loads of small files like ap, bl, csc.. Do I use all them for the upgrade on odin or can I just up the ap?
the files are like the following: BL_G935FXXU1DQB3_CL10422490_QB12410567_REV00_user_low_ship.tar
my version on my current phone is g935fxxu1bplb
Thanks
Click to expand...
Click to collapse
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk

coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
I have used Sammobile to download all the required files but when I go to try and put the AP file into Odin it freezes and stops rsesonding completely?
---------- Post added at 02:01 AM ---------- Previous post was at 01:54 AM ----------
coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
The BL, CP and CSC all work fine, but when I load the AP file it crashes. PS, I have a home_csc and and a different csc, which one should I use to get my phone to work again?I just want the phone to load as intended as a sotck unlocked internationall s8 right now
the files are named;
CSC_OXM_G955FOXM1AQK7_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
HOME_CSC_OXM_G955FOXM1AQK7_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
CP_G955FXXU1AQK7_CP8112561_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
BL_G955FXXU1AQK7_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
and the file that freezes Odin:
AP_G955FXXU1AQK7_CL12502677_QB15780981_REV00_user_low_ship_meta.tar.md5
These were all downloaded from samfirm from this post; Latest Firmware Multi-CSC OXM https://forum.xda-developers.com/ga...ck-firmware-update-odin-t3582175/post71668023
---------- Post added at 02:02 AM ---------- Previous post was at 02:01 AM ----------
coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
OMFG i just realized that post was from you! Can we talk in a chat or something to help me get my phone back to stock and also get tmobile features implemented?
---------- Post added at 02:04 AM ---------- Previous post was at 02:02 AM ----------
coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Sorry I've mistaken you with another user I think, but I STILL neeed your help mate

Finally fixed the issue. I just had to let the AP file load even though the widnow said it was not responding, aslong as i didnt click on the window and make it freeze, it eventually settled in there. along with the CSC files bl.cp. etc/ Thanks for this life saving info you've got going here guys

Flash Oreo on Samsung S7 with odin - how to change CSC from XEO to BTU?

Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!

Gisar said:
Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!
Click to expand...
Click to collapse
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU

*Detection* said:
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU
Click to expand...
Click to collapse
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)

Gisar said:
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)
Click to expand...
Click to collapse
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo

*Detection* said:
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo
Click to expand...
Click to collapse
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!

Gisar said:
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!
Click to expand...
Click to collapse
Exactly the same as XEO is also included in the BTU CSC

*Detection* said:
Exactly the same as XEO is also included in the BTU CSC[/QUOTE
What about flashing the same firmware with odin 3.13.1, but with ticked repartition in the option? This, regarding the comments in sammobile forum works. But for me doesn't. Maybe for Oreo it doesn't work or there is something specifically to do?
I can't catch your proposal for flashing the other firmware. Can you tell me which exactly firmware I have to flash first, later on to receive BTU Oreo CSC as default?
Click to expand...
Click to collapse

When I flash first MTL CSC android 7 and then flash oreo BTU, will it change my CSC code from XEO to BTU?