Has anyone been able to get out of qualcomm diag mode (black screen) on the pixel yet? Tried flashing purenexus and now got nothing, dont know what I did wrong.
Related
i have a droid 2 global i put into diag mode by holding "t" while powering on flashed to metropcs using dfs cdma tool (bad idea) when done hooked up a second droid 2 global used dfs cdma tool to flash to metropcs when done realized neither phone had working internet then realized i dont have to hold "t" to put diag mode they are both still in diag mode i have restored with sbf but still stuck in diag mode phone works for talk and txt but data wont work with it in diag mode can someone help me to get them out of diag mode thanks
no need to hold "t" to enter diag mode, just change the usb mode to "pc mode" at the notification bar
because the motorola "network" will always on
un1ocked said:
no need to hold "t" to enter diag mode, just change the usb mode to "pc mode" at the notification bar
because the motorola "network" will always on
Click to expand...
Click to collapse
are you sure because i have flashed alot of these globals to metropcs and i always had to hold t to put in diag mode and i have three rite now all with pc mode selected only the two i used dfs on stay in diag mode and after i flash internet doesnt work i have flashed both of them to metropcs before and everything worked now it stays in diag mode and data dont work the the one i didnt use dfs on when i power on holding t i get ip 192.168.16.1 and can make port with HW Virtual Serial Port and use qpst after reboot without holding t no ip cant make port even with pc mode the other two always get ip i dont get it
nevermind quess i was tripping, your right no need for t. i dont know why i cant get data working
I'm stuck in the fastboot loop. After I unlocked the bootloader I got factory reset and I forgot to enable USB debugging which I believe caused the issue. Recovery doesn't work and MSM tools do not work. Tried a lot of button combinations to get into EDL with no luck, I'm guessing it doesn't work because it's not hard bricked? I'm not seeing the qualcomm drivers in device manager.
Turns out the "genuine OEM" cable I bought from ebay was the problem, now I can get into EDL mode and use msmtool
Hey guys, i´m trying to access my phone via EDL mode.
I am able to enable the EDL Mode by shorting the board pins, the COM Port is correct (Qualcomm HS-USB QDLoader 9800), but the phone wont turn on when in EDL mode, i dont know if this is correct or not. It boots ok in normal mode.
I cant find a programmer either, i could find "prog_emmc_firehose_Sdm660" but i think the Note 6 Pro is "Sdm 636", not sure.
Any help?
Thanks
I'm in trouble trying to restoring original imei, My imei is 0000 now and i can't manage to fix.
I have tried a bunch of things, Got stuck trying to connect the phone in diag mode, so i can use qfil to rewrite.
Any help or easier method?
Thanks
Is your phone a US phone? or GSM? sm-S908 | U | F | B?
Where and from whom did you buy your phone? My thoughts are that someone pulled a fast one and that you might have been scammed..
Sm-s908e
lost imei after flashing rom
Did not made Qcn backup
Alright, check this post out...
also check out this video of a dude rebooting into EDL mode, which I believe is the mode of function that you're looking for.
This is the Youtube video.
Dial:
*#9900#
Choose Upload mode. I think it's different if your model is american. I'm about to try it out..
You will need the qualcomm 9008 drivers.
Yeah i saw that, but is not the same
"Diag Port [Qualcomm HS-USB Android Diag 901D ] and Qualcomm HS-USB QDLoader 9008 – both are separate things. Android Diag 901D is a diag port while the HS-USB QDLoader 9008 is an emergency download mode [known as EDL mode]."
How to Enable Or Disable Diag Mode on Qualcomm device using ADB [Works on Vivo, Xiaomi, Oppo and more]
Here is the guide on How to Enable Or Disable Diag Mode on Qualcomm device using ADB [Works on Vivo, Xiaomi, Oppo and more]. Read full detail
www.getdroidtips.com
But i think i gotta get a cable to try in Edl as i tryed all i have found
i'm trying to flash other rom's to search for any change
Appreciate your help.
My bricked lumia 640 xl rm-1065 is not being detected as QHSUSB_BULK, but all drivers are installed (Qualcomm HS USB too). Is there any way to get rid of emergency mode without software? Like by hardware/opening the phone. I also heard something about JTAG. Do you know what it is? Or maybe a way to make it recognize as QHSUSB_BULK?