Hey everyone.
My htc one m8 verizon gives me this particular error that sometime says " message failed. Would you like to retry ? " and after that if it didnt work i got a new pop-up that says " SMS ERROR " ss heading and below it say " GENERAL PROBLEM " OR sometime it says " DETAILS: CAUSE 2 OR 3 "
but mainly the issue is it irritates me when im texting with someone and i have to retry again n again for the message to be sent.
NOTE : I have unlocked verizon model and im using GSM sim and im in pakistan.
NEED HELP GUYS
thanks in advance
Related
hi
i have htc 8x locked in operator three I've upgraded to wp 8.1 with preview for devlopers but i found A lot of problems ( battery life / black camera / .... ) And for this I want to downgrade back to WP8
- I got Download the official europe rom :
(RUU_ACCORD_U_APO_00_HTC_Europe_2.00.401.03_1.11b.32.19.23_2_15.42.32_RETAIL_ENC_RELEASE.exe)
- And I started doing the steps But he show me a message say ( ERROR [294] : INVALID VENDOR ID )
I got up to search for the meaning of ERROR [294] I found this (( Every device contains a short string that identifies the operator who sold it. Because the same device is sold by different operators, this prevents users from flashing a T-Mobile ROM to a device that was sold by Orange, for example. You probably need to Install a HardSPL or CID Unlock your device. ))
And I think the problem is my bootloader is locked , And I am looking for a way to open it for( Flash original ROM)
Who can help me to do that please.
sorry for my bad english ^^
Pleas I need help
please i need help
hellllllllllllllllllp meeeeeeeeeeeeeeeeeee
cane spùe one help meeeee
PLEASE HELP !!!
None of the secret codes would run on my Galaxy S3 Verizon SCH-I535 (Android 4.4.2 ) .
Everytime I run a code it gives me an error message ( Connection problem or invalid MMI code).
Tried almost all secret codes but no avail, even the code to check the IMEI wont work and gives the same error message.
FYI - I got it unlocked in India.
hemantk786 said:
PLEASE HELP !!!
None of the secret codes would run on my Galaxy S3 Verizon SCH-I535 (Android 4.4.2 ) .
Everytime I run a code it gives me an error message ( Connection problem or invalid MMI code).
Tried almost all secret codes but no avail, even the code to check the IMEI wont work and gives the same error message.
FYI - I got it unlocked in India.
Click to expand...
Click to collapse
Its sim unlocked not bootloader unlocked
Sent from my Nexus 5
Pretty sure dialer codes were disabled due to security concerns several years ago. Something about a particular one being used to factory reset phones. So, there's no way around that.
Sent from my SCH-I535 using Tapatalk
So what should I do to make them work on my phone ?
Kindly help, I would really be grateful of you.
It is weird that none of the secret codes would run on my phone & all I get to see is ( Connection problem or invalid MMI code), I have tried adding a "," after the code but it didnt work either.
What should I do ?
hemantk786 said:
So what should I do to make them work on my phone ?
Kindly help, I would really be grateful of you.
It is weird that none of the secret codes would run on my phone & all I get to see is ( Connection problem or invalid MMI code), I have tried adding a "," after the code but it didnt work either.
What should I do ?
Click to expand...
Click to collapse
As stated in the previous post they were disabled years ago. There isn't a way to re-enable them
Sent from my Nexus 5
Hi I currently have the HTC Desire 510 android phone running kitkat 4.4.2 but however when I try to check the Sar level on my phone by going to the dialer app on my phone and putting the following *#07# I keep receiving the following error message (Connection problem or invalid MMI code). I have searched google for the answer but I have had no luck. I do not know how to fix this. Any help to this question would be appreciated thanks.
I'm sorry if this is in the wrong category , Im new to the XDA forums
So a few weeks ago , I decided to upgrade my S3 Gt-i9300 to android 4.3 from 4.1.2. I thought it was pretty easy , download the rom and then use Odin. Well I screwed up. I used this app called Updato , from which I downloaded the firmware. I didn't realize that I actually download the Poland version and there was something called Orange(pretty sure it was the SIM carrier ) and I ACCIDENTALLY installed it. Well it ended up with my SIM not being detected by my phone. Im pretty sure my SIM is fine its something wrong with the phone. Previously my region rom was Kenya ( although I don't live there) so then , I tried a bunch of stuff , like getting a rom of my own country , which didn't work... Tried to do a bunch of tricks with the battery and SIM . I think that my SIM might have been locked or something... but not quite sure. It was perfectly working before the update. So can anybody link me a rom or atleast help me? When ever I try to connect to a carrier through the settings , I get a small message at the bottom "Network registered" but then in notifications I get the message" No service: Selected service provider not available"
And if you link me a Rom please be 4.1.2 because my phone now lags and hangs a lot. Thank-you.
PS: Need help fast though.
I recently purchased this phone which was new when I got it. It was unlocked and had a clean IMEI , branded with Claro OS. I did a factory reset a few days after getting it and when I put my sim card in an error message pops up about the claro network, its in spanish but I did a translate of it and it seems to be saying it has an outstanding balance, but if I think its an error ignore the message. I can disable to notification, but every time the phone reboots the error message comes back.
The phone works fine, but the error message keeps on popping up after rebooting. I just need some advice on what can be done to stop this? The error only came up after doing the factory reset initially.
I can send some screen shots of the messages if that will help with a solution.
Thanks for any advice you guys can give!
Decided to share a screenshot anyway
Calro Puerto Rico
mrh4ck said:
Decided to share a screenshot anyway
Click to expand...
Click to collapse
Hello, did you find a solution? I have units with the same problem.