Hi!
I asked this question first on another board, but XDA-Dev is for me the best board when it come to hard question.
So here's the problem : I think I messed up my device while trying to flash it with a french rom.
I edited the rom and swaped the headers with Hexedit from the english roms to the french roms in :
RadioFS.nbf
RadioOS.nbf
CEOS.nbf
EXTROM.nbf
But here's the problem... while flashing the device, the RadioOS is stuck at 0.1%.
If I remove the RadioOS.nbf & RadioFS.nbf from the hpRUU.ini then it flash the unit, and everything is ok except that I cannot active the Radio (cell phone), it lookup the device.
Here's what I see from the Asset Viewer:
Radio Present : Yes
Radio Firmware Version :
Radio Protocol Stack Version :
Radio Bootloader Version :
Radio File System Version :
Default Radio GDFS Version :
I've tried to reflash the device with bigrom, but no luck, it just flash CEOS.nbf & EXTROM.nbf.
Finally, if I try to flash de device from windows with the ROM12132Beta (with activesync disabled) I get an Error 514 message : device failed verification. So I hacked the rom to get it to flash (with hexedit I replaced the 3 letter language with blank space) but it get stuck at 1.0%.
So do you know if there's is a way to force the flashing of the RadioOS.nbf & RadioFS.nbf? (maybe directly from the SD card?)
Thank you very much in advance!!
Please anybody has a little idea?
Because since this is a US device and I'm in Canada I'm not covered by the warranty, so I'm really screwed. I understand this is an HP device, but it is manufactured by HTC and I'm sure that if there's a place where there's people that know well the HTC devices, it's here.
I have the same problem. I'm going to use a sd card to reflash my HW6515. Did u solve the problem?
Not really... I sent it back for repair...
Not really great because this mean I'm 2 months without my PDA
You can also check this thread at BuzzDev :
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=28&id=23221#23221
Fuzy said :
PS.
When flashing sometime the process stop at1%. I hard reset and started flashing again. Finally after repeated trials, flashing was successefully. So, try to insist.
fuzy
Click to expand...
Click to collapse
Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L
Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!
Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers
Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!
Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance
Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?
find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.
Try PDA Viet Step 1
Try PDA Viet Step 1 Temp
hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards
Try this.
If that fails post again but be more specific e.g. what did you do before this happened?
Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen
can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me
Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
sorry i can use the link
downloading
saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.
hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me
2.58.0001
Click to expand...
Click to collapse
Never seen that before...
Is there a specific thread radios for htc 7 pro ?
I'm currently using Radio 5.63.09.13_3a_22.36.50.15U
I'm in asia, I can not access 'ussd code running', it always appears the message 'phone failed'
Thank you for attention.
charboss said:
Is there a specific thread radios for htc 7 pro ?
I'm currently using Radio 5.63.09.13_3a_22.36.50.15U
I'm in asia, I can not access 'ussd code running', it always appears the message 'phone failed'
Thank you for attention.
Click to expand...
Click to collapse
download a pro7 rom that has a radio that you want to try.
rename the .exe to .zip
extract the .zip
remove the "RUU_sighned.nbh"
bring phone in bootloader.
run the "ROMUpdateUtility.exe"
follow the instructions on screen.
remember that this will hard reset the phone.
before you do all this first R/H spl your phone.
http://forum.xda-developers.com/showthread.php?t=1195647
if you are not scared you could try this " http://forum.xda-developers.com/showthread.php?p=16460826&posted=1#post16460826 "
custom wrapper that don't hard reset the phone (the task00)
but remember that I nor anybody on xda is responsible for any bricks .
(for your information, I tested that tool on my hd7 but also wrappers from hd2 and it didn't brick my phone, I simply got error so you could try it )
Error Device ID HTC Trophy
Please help and sorry for my English better from the Czech Republic
After recording ROM RUU_Spark_Vodafone_SPA_1.10.164.01_Radio_5.51.09.2 9_22.32.50.10U_by_ansar
I have damaged bootloader Device ID
top-left before it was PC40 **** Now it's all blurred
And I can not upload any ROM, or can not upload another version of basic designed for ROM Trophy as eg. the European version.
When one percent of the instrument will restart and display me this error
ROM utility reports an error 244 during installation Other original
I was looking for help on XDA, but without success throwing error mito valid ID Device according to my ID is somehow erased, or do not know and therefore can not upload no other drive ...
Photos do not know where I put it to not let me put them here
Hi i have htc 7 mozart 16 gb from tmobile.I was on mango rtm and i flash the rom t mobile 1.09 and then the t mobile 1.28.Then when i got into the menu in about it says hardware revision number NA and radio hardware vesion 0.0.0.0.Now i am in mango official but when i getting into the bootloader mode instead of the device id it says some unreadable characters and when i try to flash o rom it goes to 1% and then invailed model id
PLEASE help if you can
Thread moved to Q&A
can someone help me plaese