I modified some files for @LeeDroid rom for sprint support prior to sprints nougat ota and posted the download link in his thread but I'm not sure how often other sprint users check his thread being that sprint support wasn't available. If interested in testing to verify before the edits get fully implemented into the rom build please let me know if there are any issues.
***Thread has been updated for Sprint Oreo Support. This thread is for sprint users to report bugs with the sprint specific components of the ROM for me to troubleshoot to lessen the work on Lee since he isn't on the Sprint network. Also with new Sprint updates I will post test zips here because devices act differently and I want to be sure that the fixes/tests I build work for everyone.***
DISCLAIMER
I, nor any of the developers involved, are not liable for any damages that may occur to your device as a result of flashing. Flash at your own risk. I have this version running currently and have had no issues.
Big thanks to @LeeDroid for putting up with my pestering for sprint support and for challenging me to get it done
Thanks to @Captain_Throwback for file location guidance and for the use of his apktool when mine was being fussy, and for the use of his Sprint APNs.
Download Test 1 - Failed attempt, thanks to all who tested and let me know that it was broken. Don't use this one
https://www.androidfilehost.com/?fid=529152257862696764
MD5 6495ccb05ec3886306aad7dbc7088f28
Test 2 was never publicly released. I had multiple test 2's
Download Test 3 - Fresh out the oven. Clean flashed (format data in twrp) and booted, restored most of my settings over mobile data without having to edit any apns, didn't have statusbar clock for a little bit which was weird but it showed up, maybe it was taking a nap . Give it a try and let me know.
https://www.androidfilehost.com/?fid=673368273298925530
MD5 0a61e3fbdad51e4fa3d0ada511606f72
Install procedure
1. Clean start in twrp (full wipe)
2. Flash sprint test zip
3. In aroma select Sprint
This is where I edited the necessary files for sprint data to connect
4. Make selections in aroma for options as you normally would
5. Let install finish
6. Reboot
6.5 Don't worry about the boot animation, personally I prefer the stock Android so that's what it is
7. Wait
8. Wait
9. Profit? Hopefully
gstanke said:
I modified some files for @LeeDroid rom for sprint support prior to sprints nougat ota and posted the download link in his thread but I'm not sure how often other sprint users check his thread being that sprint support wasn't available. If interested in testing to verify before the edits get fully implemented into the rom build please let me know if there are any issues.
<c> <b> DISCLAIMER </b> </c>
I, not any of the developers involved, are not liable for any damages that may occur to your device as a result of flashing. Flash at your own risk. I have this version running currently and have had no issues.
Big thanks to @LeeDroid for putting up with my pestering for sprint support and for challenging me to get it done
Thanks to @Captain_Throwback for file location guidance and for the use of his apktool when mine was being fussy
Click to expand...
Click to collapse
Sprint user here. Will test soon as I get a chance.. what TWRP version is necessary? Does it matter what firmware I'm currently on? Thanks!
Lurien said:
Sprint user here. Will test soon as I get a chance.. what TWRP version is necessary? Does it matter what firmware I'm currently on? Thanks!
Click to expand...
Click to collapse
I haven't updated firmware to most recent yet since it was a security update I didn't feel the need and currently my twrp version is 3.0.2-6 I believe
gstanke said:
I haven't updated firmware to most recent yet since it was a security update I didn't feel the need and currently my twrp version is 3.0.2-6 I believe
Click to expand...
Click to collapse
Great! Thanks again..
gstanke said:
I haven't updated firmware to most recent yet since it was a security update I didn't feel the need and currently my twrp version is 3.0.2-6 I believe
Click to expand...
Click to collapse
Sprint here as well, I will test too, thanks!
GROOVYJOSHCLARK said:
Sprint here as well, I will test too, thanks!
Click to expand...
Click to collapse
Should flash fine and provide a working data connection
gstanke said:
Install procedure
1. Clean start in twrp (full wipe)
2. Flash sprint test zip
3. In aroma select <b> US UNLOCKED </b>
This is where I edited the necessary files for sprint data to connect
4. Make selections in aroma for options as you normally would
5. Let install finish
6. Reboot
6.5 Don't worry about the boot animation, personally I prefer the stock Android so that's what it is
7. Wait
8. Wait
9. Profit? Hopefully
Click to expand...
Click to collapse
dude!!! awesome!! ive been waiting and wishing ice or leedroid would support sprint with their N builds! trying this now
deakelem said:
dude!!! awesome!! ive been waiting and wishing ice or leedroid would support sprint with their N builds! trying this now
Click to expand...
Click to collapse
Any update? Hopefully everything is good to go
Sprint User Too
I'm a sprint user as well and have been waiting for something like this (impatient waiting for sprint upgrade) will test and post results.
JhoonB51 said:
I'm a sprint user as well and have been waiting for something like this (impatient waiting for sprint upgrade) will test and post results.
Click to expand...
Click to collapse
I finished the edits last night and so far have had no issues but since Lee doesn't have a sprint device for testing I figured this was the best way, if everything is good the edits will be merged into the main rom
I'll try it later but the download speed is poop. Says I have 5 days left. I'll try to download later.
gstanke said:
Any update? Hopefully everything is good to go
Click to expand...
Click to collapse
I flashed like the directions said but the phone sat at the "android" boot logo for at least 30 minutes before i restored a backup. I tried flashing a second time too with certain options not selected (such as using the stock kernel this time) and the same thing happened. should i wait longer?
deakelem said:
I flashed like the directions said but the phone sat at the "android" boot logo for at least 30 minutes before i restored a backup. I tried flashing a second time too with certain options not selected (such as using the stock kernel this time) and the same thing happened. should i wait longer?
Click to expand...
Click to collapse
I did not have that issue.
Try flashing, letting sit at Android screen again if it doesn't boot try dirty flashing over top
I had formatted data through twrp and run unencrypted
Also what selections did you choose? Mmfirmware? Root method?
gstanke said:
I did not have that issue.
Try flashing, letting sit at Android screen again if it doesn't boot try dirty flashing over top
I had formatted data through twrp and run unencrypted
Also what selections did you choose? Mmfirmware? Root method?
Click to expand...
Click to collapse
hmmm.. so i selected the MM firmware options but the only thing i did different from you was I selected encryption each time. I will try again while setting encryption to disabled.
deakelem said:
hmmm.. so i selected the MM firmware options but the only thing i did different from you was I selected encryption each time. I will try again while setting encryption to disabled.
Click to expand...
Click to collapse
Format data in twrp beforehand to be able to run unencrypted, which version of twrp are you using
gstanke said:
Format data in twrp beforehand to be able to run unencrypted, which version of twrp are you using
Click to expand...
Click to collapse
yup yup, did that already. just flashed and now its booting.
Update: just an update, it is still booting and is at the android logo, 15 mins so far. I will continue to wait another 30 mins or so
deakelem said:
yup yup, did that already. just flashed and now its booting.
Update: just an update, it is still booting and is at the android logo, 15 mins so far. I will continue to wait another 30 mins or so
Click to expand...
Click to collapse
same results after 30 mins. I even tried not selecting any options other than us unlocked and the stock kernel, and disabled encryption, still had the same result. It sits at the android logo during boot up for a while and will reboot once and sit there again. Anyone else seeing any problems like this?
deakelem said:
yup yup, did that already. just flashed and now its booting.
Update: just an update, it is still booting and is at the android logo, 15 mins so far. I will continue to wait another 30 mins or so
Click to expand...
Click to collapse
I am having the same results, stayed at android logo for well over an hour and would go no further. I chose mm firmware, run unencrypted (been unencrypted long time) twrp 3.0.3....went back to 2.71
Related
This is a Stock Rooted odexed Rom based on 4.4.2 AT&T LG G3 OTA D85010f
Its a full odexed Base with stock kernel to bring you latest OTA version (D85010f), use as a base for a rom or if you mess something up to bring you back up! It has stock boot image so it doesn't need to be s"bump'd" . I took OTA to get system dump images I needed so I could make this.
Thanks go to
Google- for the OS
LG-overall a good device
Stump for my method of rooting this device
Bump team (without these guys none of this would be possible)
ArchiKitchen- what I used to do somethings
Thanks go to @montavious for testing this.
WARNING!!! You are responsible for what you flash on your phone! By downloading and flashing this you assume all responsibility for what happens to your device and nobody but YOU can be held responsible!
This is untouched stock rom with no mods or tweaks! it still has CarrierIQ, and is capable of receiving OTA updates so make sure you disable it or it will fail.
Features
Rooted
BusyBox
Init.d support
Debloated Rom is in post #2
Instructions:
1 .Download Rom to sdcard
2. boot into TWRP
3. make a full backup -always good ideal
4. factory reset, wipe cache and system
5. flash Rom
6. reboot
7. enjoy! (Optional)
On first boot it can take 5-10 minutes to load so give it some time.
ATT LG G3 latest OTA D85010f download - https://www.androidfilehost.com/?fid=95784891001612878
MD5 - e85a49729530941f27082ee4a843a32e
IF you like what I do hit the thanks button
Wulf_Rom based on latest OTA
Features
Rooted
BusyBox
Init.d support
Odexed
App apps in mulitwindow
Removed Carrier IQ
Some tweaks
Mostly Debloated
Removed OTA apps
Stable build
Instructions:
1 .Download Rom to sdcard
2. boot into TWRP
3. make a full backup -always good ideal
4. wipe data, cache, system and factory reset (required)
5. flash Rom
6.r eboot
7. enjoy! (Optional)
Wulf Rom Download - https://www.androidfilehost.com/?fid=95832962473397414
Did u notice any difference after taking the ota
elry567 said:
Did u notice any difference after taking the ota
Click to expand...
Click to collapse
Lol nothing real noticeable or mind blowing, pretty sure it's just some tweaks under the hood and patches.
Mobile hotspot not working to good. Although I didn't factory reset after update, something I usually do cause things tend to not work right. Until I do can't say too much about it.
Does this have the latest radio from At&t?
Thanks a ton for this. Everything works great. Did a restore with TB and I'm back and running with no issues.
Nutzzer said:
Does this have the latest radio from At&t?
Click to expand...
Click to collapse
Modem wasn't updated, still the same version
I was waiting for something like this.
Have a question for you guys , has anyone that took OTA able to either bump their device again either command line or flashify or roll back to D85010d using LG flashtool?
Edit. NM, I got my answer lol
1Cwulf said:
Have a question for you guys , has anyone that took OTA able to either bump their device again either command line or flashify or roll back to D85010d using LG flashtool?
Edit. NM, I got my answer lol
Click to expand...
Click to collapse
and the answer isssssssssssss? lol
shekinahsmoke said:
and the answer isssssssssssss? lol
Click to expand...
Click to collapse
Lol, with latest ota bump still works to get twrp.
great stuff.. tricked me when i saw lollipop in the title at a glance. lol
socal_av said:
great stuff.. tricked me when i saw lollipop in the title at a glance. lol
Click to expand...
Click to collapse
i dirty flashed over my stock rooted D85010d and everything was fine had to re debloat, tweak ui sounds and restart xposed but no problems. FYI Good job 1Cwulf
dhdneophyte said:
i dirty flashed over my stock rooted D85010d and everything was fine had to re debloat, tweak ui sounds and restart xposed but no problems. FYI Good job 1Cwulf
Click to expand...
Click to collapse
stock recovery? cause this would be ideal...
shekinahsmoke said:
stock recovery? cause this would be ideal...
Click to expand...
Click to collapse
have to flash with twrp
The KS for posting this. When debloated, deiq'd and greenfield I find stock far smoother than the various variants derived from an international base.
Installed this ROM on my wife's new phone last night using Bump TWRP. Everything seems to work great which is what i want. Thanks.
Was concerned about the infamous overheating problem about this phone with simple video playback. Play video (not game) for a few hours and can barely feel the temperature difference. May be the problem is about video game but that is not my concern.
@1Cwulf: Care to elaborate on the "some tweaks" that you mention in the second post? I tried the international ROM, and it has a few lttle issues that is making me want to try back a proper D850 ROM.
TemporaryTester said:
@1Cwulf: Care to elaborate on the "some tweaks" that you mention in the second post? I tried the international ROM, and it has a few lttle issues that is making me want to try back a proper D850 ROM.
Click to expand...
Click to collapse
Just something to help with lag and possibly improve battery life a bit.
Its not intended to be a full feature Rom (at least not atm), just something as close to stock without losing functionality.
Sent from my LG-D850 using Tapatalk
1Cwulf said:
Removed Carrier IQ
Click to expand...
Click to collapse
I am using the "debloated" version.
I recommend re-removing CarrierIQ as there is quite a bit of cruft left.
http://forum.xda-developers.com/att-lg-g3/general/carrier-iq-removal-t2819450
**You can begin the following process from any Build/ROM but you must already have Root Access**
**Required** FlashFire - Play BETA - PREVIEW
1. Join the G+ community using the same Google account as you're using for Play on your phone/tablet Here.
2. Sign up to receive the BETA versions from Play Here.
- Use the link provided after sign-up to download the app.
**Notice!** In light of the OE1 ota update these ROM's are no longer safe. Stay tuned for a new Keep Root thread!
***FlashFire v19 Recommended***
Download:
- G900V_OD5_Stock_Rooted_ROM
- G900V_OD5_Stock_Deodexed_ROM
Set your screen timeout to 10mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and use default "Reboot" setting.
6. Last, press the lightning bolt then "Ok" to begin the flash .
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the Verizon splash screen for 1 - 2 minutes (15 - 20mins for DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Known Issues:
- None!
- When reporting an issue please always include your starting firmware, FF version, ROM version flashed, and relevant details. Should the flash fail please review FF's last log for errors and include info in your post.
Optional (Flash using FlashFire's "Flash zip or ota" option):
- G900V_OD5_TetherAddOn
- G900V_OD5_Write_to_SDCard
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The process will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OD5.
3. No need to wipe prior to flashing, the ROM will automatically perform a factory data reset.
4. If you do not already have root access (or to unbrick) you must flash the G900VVRU1ANCG_Full_Odin.tar (flash in Odin's PDA slot(AP in Odin v3.09+)), root with Towelroot (this version does not require internet access), then proceed with the above process.
5. To learn more about FlashFire's capabilities on locked bootloader devices see here: http://forum.xda-developers.com/showpost.php?p=60070810&postcount=2
Credits:
@Dudash - for the system.img used in the ROM and testing.
Good Day family & Friends of XDA. I hope we all have fun here today learning new things together:angel:
I can't seem to get either ROM to flash.. No matter what I do, it gets to "Flashing System" in FF and then the phone just turns off. I've tried factory reset, going back to NCG, trying to flash from your other ROMs, etc and no matter what, the phone just turns off at "Flashing System" and then it will only boot into download mode.
I can't tell if it's a FF or a ROM problem. Maybe you could make a version that can flash in Safestrap like your OA8 ROM.
I'm gonna keep trying tho.
EDIT: Okay so I finally got it to finish the flash process and then it hung on the "Samsung Galaxy S5" splash screen for like 10min before finally going to the Verizon boot animation. I'll edit this with an update if/when it gets past the boot animation.
EDIT 2: 30min and counting at the boot animation. lol. Has anyone gotten the ROM to flash and load up successfully?
Dudash said:
I can't seem to get either ROM to flash.. No matter what I do, it gets to "Flashing System" in FF and then the phone just turns off. I've tried factory reset, going back to NCG, trying to flash from your other ROMs, etc and no matter what, the phone just turns off at "Flashing System" and then it will only boot into download mode.
I can't tell if it's a FF or a ROM problem. Maybe you could make a version that can flash in Safestrap like your OA8 ROM.
I'm gonna keep trying tho.
EDIT: Okay so I finally got it to finish the flash process and then it hung on the "Samsung Galaxy S5" splash screen for like 10min before finally going to the Verizon boot animation. I'll edit this with an update if/when it gets past the boot animation. lol.
Click to expand...
Click to collapse
Screen timeout set at 10mins?
muniz_ri said:
Screen timeout set at 10mins?
Click to expand...
Click to collapse
Yep.
Dudash said:
Yep.
Click to expand...
Click to collapse
I am seeing this symptom across many devices but fortunately not often. It's definately a problem with FF.
muniz_ri said:
I am seeing this symptom across many devices but fortunately not often. It's definately a problem with FF.
Click to expand...
Click to collapse
What's weird is I've never had this problem with FF and I've flashed your ROMs multiple times in the past on multiple devices. It's just odd that it started happening with this new update.
Dudash said:
What's weird is I've never had this problem with FF and I've flashed your ROMs multiple times in the past on multiple devices. It's just odd that it started happening with this new update.
Click to expand...
Click to collapse
I see we have several dozen downloads and only one reported failure. I would be interested to hear if others are having the same issue.
That's why I asked earlier in the thread if anyone had successfully installed and had it load up all the way.
I too have had the same issues as Dudash. I tried 3 times last night using FF and every time, ended up stuck on the Samsung screen.
wccann said:
I too have had the same issues as Dudash. I tried 3 times last night using FF and every time, ended up stuck on the Samsung screen.
Click to expand...
Click to collapse
Whew. Glad I'm not the only one..
And thank you for using your first post to let me know I'm not losing my mind. lol
ive been lurking around these forums for years, and it took me this long to post! i usually wait until i see confirmation of new updates properly working prior to updating my device, but was feeling adventurous last night.. didnt work out so well for me.
wccann said:
ive been lurking around these forums for years, and it took me this long to post! i usually wait until i see confirmation of new updates properly working prior to updating my device, but was feeling adventurous last night.. didnt work out so well for me.
Click to expand...
Click to collapse
Stand by everyone....
What's new in OD5? (Assuming it just came out.)
Actually even if you use safestrap youll get stuck on the samsung logo despite me coming from NCG. Also i did flash 0C4 firmware and i was still unable to move forward, maybe you compiled the rom badly
MuminMohamed said:
Actually even if you use safestrap youll get stuck on the samsung logo despite me coming from NCG. Also i did flash 0C4 firmware and i was still unable to move forward, maybe you compiled the rom badly
Click to expand...
Click to collapse
I believe its the updater script and should be a quick fix. Will upload new versions later tonight.
is there a method of flashing this over oc4 without having to do a full flash and factory wipe?
packetjunkie said:
is there a method of flashing this over oc4 without having to do a full flash and factory wipe?
Click to expand...
Click to collapse
I'd recommend waiting until he uploads new versions of the ROMs later tonight and as far as the factory wipe goes, the ROM does it for you but you can back up your data with FF before doing the flash and then restore it afterwards.
Download:
- G900V_OD5_Stock_Rooted_ROM
- G900V_OD5_Stock_DeOdexed_ROM
Click to expand...
Click to collapse
Er... these aren't linked to anything. At least that's what happens to me. YMMV.
RBEmerson said:
Er... these aren't linked to anything. At least that's what happens to me. YMMV.
Click to expand...
Click to collapse
That's because something was wrong with them and they wouldn't install correctly.
I was hoping he would remove the links so people wouldn't download and try to use them and end up like those of us that tried. lol.
He said he'll be uploading new ones later tonight.
With a team effort from myself and @tdunham I'm back again with a completely stock build of Android TW-Lollipop 5.1.1 (N920PVPU1AOGD) for the Sprint Samsung Galaxy Note 5.. I built this stock pre-rooted ROM using the official Samsung tar ball. The ROM will self root upon flash and it has init.d/busybox support (when custom kernels support it). Knox and Sprint Itson has been removed completely. It is completely stock with all of the original factory installed apps as well as a few added features. This build contains a fully deodexed framework and system apps.
Other than the removal of Knox and Sprint Itson, it is stock in almost every other way. This first build is stock and will stay that way. I may make a custom rom later on. This ROM is intended for people who want the stock rom in it's original form with the addition of root and removal of Knox & itson, as well as other members who need a good solid base for their rom projects. I give permission for other dev's to use this rom as your base and I highly recommend that you do so because it is bug-free and built from the official Samsung tar ball. However I do expect proper credit if you use this rom for any other project. If you discover any issues please send me a PM as I may not continuously monitor this thread. If you like my work please press that Thanks button, rate this thread, and consider a kind donation! Enjoy!
About ROM:
Android 5.1.1 N920PVPU1AOGD_N920PSPT1AOGD_SPR
Stock N920PVPU1AOGD kernel (root-permissive) by: @Manh_IT
All factory installed apps including the Sprint Setup Wizard, etc are included. Nothing was removed except...
Knox and Sprint Itson removed.
Hotspot mod enabled
Added camera shutter sound option in camera settings
Added call/message block in settings
Enabled call recording from the phone dialer
Private mode works out of the box
That's about it... for now. This should be as close to the original rom as possible.
Known issue:
tx_dbs_tx said:
I just wanted to let people know that Sprint "ID" is causing Carrier Setup Wizard to fc as well as ID itself. This is a known issue and it is caused by Sprint "ID". I have not been able to successfully deodex it. The apk doesn't like to be deodexed. Until ID has an update through Google Play or Sprint Zone I will not be able to update it in the rom. Once there's an update to ID please send me a PM and I will update the rom. Until then you will have to delete or freeze Sprint "ID" to stop the fc's. Sorry for this inconvenience. It is out of my control at this time.
Click to expand...
Click to collapse
If you are currently on the stock unrooted rom:
You ONLY need to flash the latest TWRP recovery ( for the N920P ) using odin on your pc. Nothing else. Then flash this rom afterwards. The ROM zip will pre-root your phone as well as flash the stock root-permissive OGD kernel by @Manh_IT
Flashing instructions: ***Before beginning the flash/setup process MAKE SURE your battery has at least 50% charge and/or connected to the charger!!!***
1. Backup anything you don't want to lose off your internal device storage to another location just to be safe.
2. Download the rom using your pc. (downloading with your phone has a much higher risk of file corruption. Not recommended with large files).
3. VERIFY the md5!!! Once the download has finished, compare the AFH md5 using a md5 tool on your pc. (Google "md5 checksum windows").
4. Put the downloaded rom onto your internal storage..
5. With phone powered off, reboot into recovery by pressing and holding volume up, power and the home button until you see the Samsung logo then release all buttons.
6. Once in recovery choose the wipe button and do a factory reset three times. Optional but recommended is to wipe "Data". This will wipe all of your user data such as google accounts so MAKE SURE you backed up first like I said in step #1 above! Next go to "advanced wipe" and select all of the partitions EXCEPT internal storage. Wiping Internal storage is optional but recommended in certain circumstances. The reason is to remove left-over data from previous version of Android and start with a clean slate.
7. Choose the "Install" option and select the rom "Sprint_Hybrid_N920PSPT1AOGD" from your internal storage. It will flash the rom and give a confirmation once completed.
8. Press "Reboot" then "reboot system". You should get no prompts or warnings about not having root.
9. Initial rom "optimization" may take several minutes while ART builds its cache and the phone will remain on the yellow Sprint Spark screen for about 8 to 10 minutes. Let the phone optimize for at least 10 minutes and the screen WILL eventually turn off or show the setup wizard once it finishes. If the screen turns off then simply turn it on and proceed to setup your phone.
10. Once finished with the setup wizard, wait a few moments and the phone will automatically install the Sprint apps. (I know... nobody likes that suff!) You must either "accept" or "disagree" with each and every google prompt for these apps or else the installs pause until you do so.. That's it! You're done!
flashing anything on your device is done at your own risk. There is no way myself or any other developer can guarantee that flashing this ROM or any other file will not brick your device or otherwise cause some other type of damage. This is just a standard warning. I am not responsible for anything that you do to your device.
Credits:[CENTER @tdunham for his initial kitchen updater script and his willingness to work together with me so we could tag team the initial dev'ing and testing phase. I must say it was a pleasure!
the same awesome group of testers which also are credited in T's OGD ROM thread found HERE. @Team DevDigitel @Chaz187 @fsunoles101 @JoeyDuran @GAPO @rlmiller @sml2004
Special thanks to: @Beastmode Brian for providing the updated google apk's i needed. Thanks a lot man!
If somebody was left out please let me know!
[/CENTER]
DOWNLOADSprint Stock N920PSPT1AOGD DeodexedEnjoy!!!.
XDA:DevDB Information
Sprint_Hybrid_N920PSPT1AOGD, ROM for the Sprint Samsung Galaxy Note5
Contributors
tx_dbs_tx, @tdunham @Team DevDigitel
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N920PSPT1AOGD
Based On: N920PVPU1AOGD_N920PSPT1AOGD_N920PVPU1AOGD_HOME.tar
Version Information
Status: Stable
Stable Release Date: 2015-09-06
Created 2015-09-03
Last Updated 2015-09-09
Mods
N920PVPU1AOGD_Odexed-Deodexed_Hotspot_Mod
(can be flashed on odexed or deodexed OGD roms. the script will remove appropriate odex files automatically)
Reserved
Nice man congrats on the release..... Glad to see sprint getting some love! !!!!
You moved over to the 5, Sweet!!!!!?
Ok, now I really need root!
The mans in the house thanks bro
Sent from my SM-N920P using XDA Premium HD app
So glad to see develpment starting to move along. Thank you so much for this. Awesome job.
Sent from my SM-N920P using Tapatalk
Rom doesnt get passed the sprint boot screen waitied 15 minutes it just randomly rebooted
Sent from my SM-N920P using XDA Premium HD app
pbedard said:
Rom doesnt get passed the sprint boot screen waitied 15 minutes it just randomly rebooted
Sent from my SM-N920P using XDA Premium HD app
Click to expand...
Click to collapse
I just slammed my brake when I say this. I'll till this issue is resolved.
pbedard said:
Rom doesnt get passed the sprint boot screen waitied 15 minutes it just randomly rebooted
Sent from my SM-N920P using XDA Premium HD app
Click to expand...
Click to collapse
Did u download the ROM on ur phone? If so, u still have to verify the MD5. One thing about DBS ROMs is a completely clean slate is best. I would re-download the ROM on computer the verify and move to internal storage. U have a backup to go to JIC?
M2Iceman said:
You moved over to the 5, Sweet!!!!!?
Ok, now I really need root!
Click to expand...
Click to collapse
No I don't have the Note 5. I was invited to come help with the new stock base rom and thisis simply my own version with everything left in the rom and is hybrid odexed/deodexed.
Can somebody please download, verify md5 and test flash for me. I need to make sure there's not a problem with the rom. I need a comfirmation from a couple of people wether you successfully boot or not. Thank you.
tx_dbs_tx said:
No I don't have the Note 5. I was invited to come help with the new stock base rom and thisis simply my own version with everything left in the rom and is hybrid odexed/deodexed.
Can somebody please download, verify md5 and test flash for me. I need to make sure there's not a problem with the rom. I need a comfirmation from a couple of people wether you successfully boot or not. Thank you.
Click to expand...
Click to collapse
The md5 matched, but I'm also getting a failed boot at the spark screen. sits on it for a good 10 minutes, reboots, then does it again.
Do you care if i use this as a base? Gonna go through and pull bloat for the lazys and reup it.. credits due of course for your orginial work. Lmk
Thanks for the build. Gonna run in as soon as the dl finishes
So being that this is odex and deodexed and some system apps aren't deodexed, will xposed work with this rom?
tx_dbs_tx , Original poster is correct, flashed 3 times 3 dls, no go,, same result long wait on spark logo, random reboot and restarts again, wont fully boot as is
Team DevDigitel said:
Do you care if i use this as a base? Gonna go through and pull bloat for the lazys and reup it.. credits due of course for your orginial work. Lmk
Thanks for the build. Gonna run in as soon as the dl finishes
Click to expand...
Click to collapse
Hit me up on Hangouts if you can. [email protected]
If you have time you can help me test to find the problem. I can tell you exactly what to do to find the cause and you won't have to re-download the rom.
Sorry about this people. I don't have the Note 5 so I couldn't flash & test this build which is based off of our original test roms which are good to go. I made some changes, updated some framework files and re-uploaded this version and it's not booting. In the meantime I have to pull the download/link until i find and fix the problem. If anyone can help me test the rom, please contact me on google hangouts using my email address above. Thank you.
tx_dbs_tx said:
Hit me up on Hangouts if you can. [email protected]
If you have time you can help me test to find the problem. I can tell you exactly what to do to find the cause and you won't have to re-download the rom.
Sorry about this people. I don't have the Note 5 so I couldn't flash & test this build which is based off of our original test roms which are good to go. I made some changes, updated some framework files and re-uploaded this version and it's not booting. In the meantime I have to pull the download/link until i find and fix the problem. If anyone can help me test the rom, please contact me on google hangouts using my email address above. Thank you.
Click to expand...
Click to collapse
Any way to get that kernel? I think the Noble kernel is crashing my phone. Sprint Note 5
My is crashing. Every time i use hotspot
Jordan011 said:
Any way to get that kernel? I think the Noble kernel is crashing my phone. Sprint Note 5
Click to expand...
Click to collapse
A couple of people are currently working on the stock OGD root-permissive kernel. When they release it for testing or final build, i will include it in the rom. However I don't think the current kernel is the problem.
I sent an invite but I can't test until tomorrow I left my damn computer at work. But if you ever need some one to test something let me know, I'll gladly risk my device! Haha
CyanogenMod and D2VZW: Marshmallow Love!
To Make this easy, I am going to copy a bit of the common sense information Master Cylinder put up for the release of Lollipop, same basics apply here!
Huge thanks to Invisiblek for making these builds for us!
Thanks to Master Cylinder for all the super useful information!
De-unified Marshmallow builds for the Galaxy S3 line. This is for the Verizon variant (SCH-I535) only
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 which is designed to increase performance and reliability over stock Android for your device.
Notes:
Please Use Firmware: VRBMF1
and
Modem/Baseband Version: NE1 (Also, see "Notes - Possible Bugs" section below)
(EDIT: The following statement might not be true. It happened to one user. Unsure about circumstances...)If you have recently downgraded firmware from 4.3 to 4.1.2, DO NOT flash the MF1 firmware. You'll brick your device!
If you know you never took the 4.3 OTA, then you can flash the firmware and modem to your hearts content.
CWM Recovery addicts: Please seriously consider giving up CWM and come on board with what works for sure with 5.1.x and up, TWRP. Problems have been coming up with CWM users so if you have one, that's were to start. Hopefully there's a 12-step program somewhere for y'all
Google apps addon:
Open GApps opengapps.org They have many options for you to choose from based on your needs. Updated daily.
>>>WARNING!!<<< The first time one installs Open GApps, you have to do it with a ROM update (or reinstall current ROM) AND manually wipe the system partition first. Then install the ROM and the GApps normally, then wipe Dalvik and Cache. After that, you can flash them anytime. (More info on Website.) ALSO, for now, don't install Webview as it might not work. There is an "Android System Webview" in the Play Store that will work.
I personally don't use GApps on my Daily Driver, I have a second S3 on Wi-Fi only that I put GApps on, and I use it to basically keep all my apk files up to date. When they get updated, I move the updated apk to my main phone!
I went to opengapps.org, went to Platform: ARM, then to Android: 6.0, and then to Variant: pico. Invisiblek made sure he warned me to do a clean install of the ROM, then Immediately flash the GApps package, then Wipe Dalvik and Cache, then boot. He said NOT to try to install ROM, then add GApps later otherwise bad things can happen! Obviously pick the flavor of GApps that suits your needs!
This page will be a work in progress, so please don't yell if something is missing. I just got the OK to share this with others and wanted to get it out there for you to enjoy. I have been playing with it for the last 24 hours and it is ROCK SOLID in my opinion. I haven't found any issues yet! Daily Driver for me for certain. If you have issues, please post them for discussion below!
Firmware and Modem thanks to Invisiblek
Download - MF1 firmware with NE1 modem Combo: http://www.invisiblek.org/firmware/d2/d2vzw_MF1_firmware_NE1_modem.zip (md5sum: 7a49bb13c1160f4d4a89488127684b5b)
And without further delay, the link you all want! : http://www.invisiblek.org/roms/cm-13.0/d2vzw/
BUGS:
Need to possibly load a different File Explorer to access SD Card (DoctorImpossible)
Access to camera is not functioning correctly (DoctorImpossible) *EDIT 11-23 build camera works, camcorder fix coming next build!
Outgoing text messages show "not sent", but actually send fine. (Stealth111)
Incoming phone calls do not show caller information (Stealth111)
**When you get your ROM installed and up and running, please be kind and put a small post with information about your install so we can get as much info gathered as possible. (ROM build you installed, Recovery type/version, Clean install, or Dirty (and if dirty, over what version did you flash), what GApps package you installed(exact one please) as well as when you installed it (if on same initial install as ROM, or differently). And lastly maybe the firmware/modem combo you are running. Thanks!
***IMPORTANT INFORMATION*** If you are going to flash to cm-13.0-20151121-UNOFFICIAL-d2vzw or later build, there have been some database changes. InvisibleK has provided a flashable zip file to accommodate nuking your old telephony and settings databases. Nandroid or backup files as needed if you want, as I seem to remember doing this with CM before, and clearing the database wiped texts and call logs I believe. This only needs to be done 1 time, the first time you flash any build from 11-21 on. After you have done this once, you are good to go moving forward, you will be upgraded to the new databases. If you do not flash the "Nuke_It" zip file, you will get phone FC's and a "No SIM Card" error message. So whether upgrading, dirty flashing or whatever, reboot into recovery, flash the ROM, and BEFORE you boot, flash the following zip!
Nuke IT Database Wiper
Profit!
Enjoy!
Stealth111
For Future Use
First
For Future Use
Second
Stealth111 said:
Second
Click to expand...
Click to collapse
First!! To download from here ... I see you've got an OpenGApps link, but it says a patch has to be used. I think I saw it mentioned on a thread somewhere (when I was tracking you to see where you got the build, which didn't lead me anywhere, but then I remembered our old friend invisiblek!)
And thanks a million for starting this thread!!!:good::good::good:
Master Cylinder said:
First!! To download from here ... I see you've got an OpenGApps link, but it says a patch has to be used. I think I saw it mentioned on a thread somewhere (when I was tracking you to see where you got the build, which didn't lead me anywhere, but then I remembered our old friend invisiblek!)
And thanks a million for starting this thread!!!:good::good::good:
Click to expand...
Click to collapse
I personally don't use GApps on my Daily driver, I have a second S3 on Wi-Fi only that I put GApps on, and I use it to basically keep all my apk files up to date. When they get updated, I move the updated apk to my main phone!
I went to opengapps.org, went to Platform: ARM, then to Android: 6.0, and then to Variant: pico. Invisiblek made sure he warned me to do a clean install of the ROM, then Immediately flash the GApps package, then Wipe Caches, then boot. He said NOT to try to install ROM, then add GApps later otherwise bad things can happen! Obviously pick the flavor of GApps that suits your needs! I'll add this bit up-top as well! I don't know anything about a patch though..
Stealth111
Stealth111 said:
I personally don't use GApps on my Daily driver, I have a second S3 on Wi-Fi only that I put GApps on, and I use it to basically keep all my apk files up to date. When they get updated, I move the updated apk to my main phone!
I went to opengapps.org, went to Platform: ARM, then to Android: 6.0, and then to Variant: pico. Invisiblek made sure he warned me to do a clean install of the ROM, then Immediately flash the GApps package, then Wipe Caches, then boot. He said NOT to try to install ROM, then add GApps later otherwise bad things can happen! Obviously pick the flavor of GApps that suits your needs! I'll add this bit up-top as well! I don't know anything about a patch though..
Stealth111
Click to expand...
Click to collapse
Thanks. I also misread the notation at OpenGApps, which said that need a "ROM" with the patch to allow Google services permissions. Also, there are some posts I've found about fixing permissions after boot then reinstalling GApps, but I won't post that here in case it misleads. I'll be the guinea pig as I've dloaded and backed up and ready to jump out the window!
Stealth111 said:
CyanogenMod and D2VZW: Marshmallow Love!
Firmware and Modem thanks to Invisiblek
Download - MF1 firmware with NE1 modem Combo: http://www.invisiblek.org/firmware/d..._NE1_modem.zip (md5sum: 7a49bb13c1160f4d4a89488127684b5b)
And without further delay, the link you all want! : http://www.invisiblek.org/roms/cm-13.0/d2vzw/
Enjoy!
Stealth111
Click to expand...
Click to collapse
Hello and thank you for providing us, S3 users, with the chance to try the long awaited Marshmallow ROM.
I downloaded the ROM a minute ago, but unable to download the MF1 firmware and NE1 modem, via link. I keep getting:
Error 404: Server be all like
Am I doing something wrong? If not... What next?
I just finished booting it. It seems pretty nice, and I only noticed a few things. The boot time was around half an hour as usual with lollipop. I did notice that there wasn't any camera app preloaded and I couldn't access my sd card through the file explorer (I chose not to format my sd card as internal and I gave the file explorer root access).
Ghost Protocol said:
Hello and thank you for providing us, S3 users, with the chance to try the long awaited Marshmallow ROM.
I downloaded the ROM a minute ago, but unable to download the MF1 firmware and NE1 modem, via link. I keep getting:
Error 404: Server be all like
Am I doing something wrong? If not... What next?
Click to expand...
Click to collapse
Yes, @Stealth111 you've copied the text from the CM12 OP but that won't work for links EDIT: that are truncated in a post. You have to manually copy the link, ex: right click on the link (if you're using a computer,) copy link location of whatever, and insert it manually.
Here is the working link: http://www.invisiblek.org/firmware/d2/d2vzw_MF1_firmware_NE1_modem.zip
On another note: I couldn't get my install to function past the first couple of screen in setup. com.android.phone fc avalanche stops all progress. Wiped and installed 3 times with no success. Running NE1 modem (after flashing and booting with ML1 the first time.)
Doctorimpossible said:
It seems pretty nice, and I only noticed a few things. . I did notice that there wasn't any camera app preloaded and I couldn't access my sd card through the file explorer (I chose not to format my sd card as internal and I gave the file explorer root access).
Click to expand...
Click to collapse
I also can't access the camera even after installing a new camera app. A new file explorer took care of my sd card issues however.
@ Master Cylinder, thanks for the heads up on the link, I have fixed it in the OP. For ****s and giggles, trying wiping and installing just the ROM, and then wipe Dalvic and Cache and see how it goes. Maybe a GApps issue. Also, goes without saying, make sure the MD5 from the download matches to verify you got a good DL..
@Doctorimpossible, glad you were able to sort out the access issue. I install ES File Explorer right away, so I didn't notice the issue. Good catch. These are the types of thing we need to sort out as quickly as possible to get this thing rolling! I will say that my initial boot only took about 5 minutes, but again, I did not load ANY GApps.
Master Cylinder said:
Yes, @Stealth111 you've copied the text from the CM12 OP but that won't work for links EDIT: that are truncated in a post. You have to manually copy the link, ex: right click on the link (if you're using a computer,) copy link location of whatever, and insert it manually.
Here is the working link: http://www.invisiblek.org/firmware/d2/d2vzw_MF1_firmware_NE1_modem.zip
On another note: I couldn't get my install to function past the first couple of screen in setup. com.android.phone fc avalanche stops all progress. Wiped and installed 3 times with no success. Running NE1 modem (after flashing and booting with ML1 the first time.)
Click to expand...
Click to collapse
So is this a hit or miss when flashing or not?
Ghost Protocol said:
So is this a hit or miss when flashing or not?
Click to expand...
Click to collapse
I have installed it on 4 devices myself with no issues. They were all with TWRP 2.8.7.0, clean installs, data wiped, ROM only install, and wiped caches before first boot. DoctorImpossible also has installed it and is up and running. I don't know what GApps he is running (if any). I will add to the OP asking people to put what they did/used for successful installs.
Stealth111 said:
@ Master Cylinder, thanks for the heads up on the link, I have fixed it in the OP. For ****s and giggles, trying wiping and installing just the ROM, and then wipe Dalvic and Cache and see how it goes. Maybe a GApps issue. Also, goes without saying, make sure the MD5 from the download matches to verify you got a good DL..
@Doctorimpossible, glad you were able to sort out the access issue. I install ES File Explorer right away, so I didn't notice the issue. Good catch. These are the types of thing we need to sort out as quickly as possible to get this thing rolling! I will say that my initial boot only took about 5 minutes, but again, I did not load ANY GApps.
Click to expand...
Click to collapse
I tried that just now for the 4th crapout, and there's no MD5 that I can see, but I'm gonna dload the ROM again to my lap and push it over and try again.
Ghost Protocol said:
So is this a hit or miss when flashing or not?
Click to expand...
Click to collapse
Of course! It's the first unofficial build for us.
Stealth111 said:
I have installed it on 4 devices myself with no issues. They were all with TWRP 2.8.7.0, clean installs, data wiped, ROM only install, and wiped caches before first boot. DoctorImpossible also has installed it and is up and running. I don't know what GApps he is running (if any). I will add to the OP asking people to put what they did/used for successful installs.
Click to expand...
Click to collapse
I used the GApps linked in the description with the stock option and flashed using TWRP 2.8.7.0. I rebooted from 5.1.1, factory reset, manually wiped system, flashed the rom, then flashed GApps, wiped the cache, rebooted, rebooted again and flashed xposed (which works by the way!)
Master Cylinder said:
I tried that just now for the 4th crapout, and there's no MD5 that I can see, but I'm gonna dload the ROM again to my lap and push it over and try again.
Of course! It's the first unofficial build for us.
Click to expand...
Click to collapse
Here is the MD5 from my file if it helps!
192BD2F6A83BCA791E0AFE9570134058
Doctorimpossible said:
I used the GApps linked in the description with the stock option and flashed using TWRP 2.8.7.0. I rebooted from 5.1.1, factory reset, manually wiped system, flashed the rom, then flashed GApps, wiped the cache, rebooted, rebooted again and flashed xposed (which works by the way!)
Click to expand...
Click to collapse
Yuppers! Exposed for Android 6
Thanks for the report!
Fingers crossed for Master Cylinder!!
Stealth111 said:
If you have recently downgraded firmware from 4.3 to 4.1.2, DO NOT flash the MF1 firmware. You'll brick your device!
Click to expand...
Click to collapse
how do i know if i have the right one ? it was a while since i rooted and flashed my phone.
thanks.
Sent from my SCH-I535
Jaws4God said:
how do i know if i have the right one ? it was a while since i rooted and flashed my phone.
thanks.
Sent from my SCH-I535
Click to expand...
Click to collapse
There's no way to tell, but you're probably okay. How did you flash your ROM? This is to warn people that the recent post for a procedure to "Downgrade" from their locked bootloader 4.3 OTA that all of us avoided because we were already rooted, etc. This new method has only been around since this summer, so if you have been rooted in the years category, you're probably okay.
Besides, it may even not be a problem if one had done that new method.
Master Cylinder said:
There's no way to tell, but you're probably okay. How did you flash your ROM? This is to warn people that the recent post for a procedure to "Downgrade" from their locked bootloader 4.3 OTA that all of us avoided because we were already rooted, etc. This new method has only been around since this summer, so if you have been rooted in the years category, you're probably okay.
Besides, it may even not be a problem if one had done that new method.
Click to expand...
Click to collapse
all i rememeber was downgrading from h2 to h1 to get root access.. then flashed CM12.1 on top of that ..
Sent from my SCH-I535
So this morning I went to check on lineage OS news oh, and I found out that they released today for all pixels. I am running it with no issues although I would recommend to download the micro gapps package cuz if you do the Nano or anything below it will give you issues with your phone reading SIM card. Aside from that I had successfully running the rom with magisk installed.
Which versions of gapps did you try? Only nano/micro? I was thinking of selecting pico. Also, can you update via their in house ROM updater app while rooted?
Sent from my Pixel 4 XL using XDA Labs
bradical711 said:
Which versions of gapps did you try? Only nano/micro? I was thinking of selecting pico. Also, can you update via their in house ROM updater app while rooted?
Sent from my Pixel 4 XL using XDA Labs
Click to expand...
Click to collapse
Will there still wait to check to see if the updater works but it looks like everything is fully functional within it and right now, take a look at the picture that I'm going to attach to this that is her updater and it looks like it is completely 100% functional but I cannot be sure because there is no updates to test it with.
As far as the gapps go, don't use anything smaller than micro. There is something pixel 4 needs in telephony to work that is in micro+ but not in nano or pico ... If you flash rom without gapps , your phone will work to make calls, if you flash any gapps before micro, you will get a " insert SIM, emergency calls only " message.
After you flash rom, MAKE SURE TO REBOOT AND THEN FLASH GAPPS,! otherwise if you try to do it in the same session that you flashed ramen you will get a message telling you that you have insufficient storage to flash and it will fail to flash gapps!
A few things that I wish and I hope they do fix would be the 90 hertz implementation switch as of now there is no switch for it and the screen flickers at low brightness.
Soli gestures would be great, I know DU has them working so it's a matter of time before lineage does as well.... Same goes with the squeeze for assistant,.... It is also not working ..
Not working :
Soli gestures
Squeeze
Smooth display
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there
i42o said:
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there
Click to expand...
Click to collapse
Thank you for the detailed response!! I greatly appreciate all the info and I'm sure others will as well!:highfive: I will probably try it when the ROM becomes more stable. Currently on DU myself and I don't mind waiting until the project improves further. Would you mind letting us know in the thread how your first update goes while rooted? Thank you again for trying the legendary ROM and letting us know it was released!
Sent from my Pixel 4 XL using XDA Labs
bradical711 said:
Thank you for the detailed response!! I greatly appreciate all the info and I'm sure others will as well!:highfive: I will probably try it when the ROM becomes more stable. Currently on DU myself and I don't mind waiting until the project improves further. Would you mind letting us know in the thread how your first update goes while rooted? Thank you again for trying the legendary ROM and letting us know it was released!
Sent from my Pixel 4 XL using XDA Labs
Click to expand...
Click to collapse
Yeah, so after I installed it and set it up, I then adb sideloaded magisk canary on its stock kernel, it went thru like knife thru butter.
I then rebooted into android, finalized the magisk set up, rebooted and voila... I was rooted.... I then tried Kiri Kernel, since it has the necessary things for TWRP, flashed it within ex kernel and then tried to boot TWRP in bootloader only to get stuck on TWRP splash screen...
I was honestly trying to have lineage working with a working TWRP but unfortunately it did not work as such. So I gave up on the TWRP and I've been running the ROM with magic and modules installed with no hiccups The boot time is amazing battery life is really really good...
Viper worked first try... This has has to be one of three good roms out there with little to no issues.
DU
PIXEL DUST ( CAF )
LINEAGE
i42o said:
Yeah, so after I installed it and set it up, I then adb sideloaded magisk canary on its stock kernel, it went thru like knife thru butter.
I then rebooted into android, finalized the magisk set up, rebooted and voila... I was rooted.... I then tried Kiri Kernel, since it has the necessary things for TWRP, flashed it within ex kernel and then tried to boot TWRP in bootloader only to get stuck on TWRP splash screen...
I was honestly trying to have lineage working with a working TWRP but unfortunately it did not work as such. So I gave up on the TWRP and I've been running the ROM with magic and modules installed with no hiccups The boot time is amazing battery life is really really good...
Viper worked first try... This has has to be one of three good roms out there with little to no issues.
DU
PIXEL DUST ( CAF )
LINEAGE
Click to expand...
Click to collapse
Is 90hz working??
ahoslc said:
Is 90hz working??
Click to expand...
Click to collapse
Read just one or two more posts above the one you quoted to find your answer.
bradical711 said:
Read just one or two more posts above the one you quoted to find your answer.
Click to expand...
Click to collapse
Smooth display is auto switching between 60hz and 90hz that's why I asked if just 90hz was working
i42o said:
Will there still wait to check to see if the updater works but it looks like everything is fully functional within it and right now, take a look at the picture that I'm going to attach to this that is her updater and it looks like it is completely 100% functional but I cannot be sure because there is no updates to test it with.
As far as the gapps go, don't use anything smaller than micro. There is something pixel 4 needs in telephony to work that is in micro+ but not in nano or pico ... If you flash rom without gapps , your phone will work to make calls, if you flash any gapps before micro, you will get a " insert SIM, emergency calls only " message.
After you flash rom, MAKE SURE TO REBOOT AND THEN FLASH GAPPS,! otherwise if you try to do it in the same session that you flashed ramen you will get a message telling you that you have insufficient storage to flash and it will fail to flash gapps!
A few things that I wish and I hope they do fix would be the 90 hertz implementation switch as of now there is no switch for it and the screen flickers at low brightness.
Soli gestures would be great, I know DU has them working so it's a matter of time before lineage does as well.... Same goes with the squeeze for assistant,.... It is also not working ..
Not working :
Soli gestures
Squeeze
Smooth display
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there
Click to expand...
Click to collapse
90hz works, 70% plus brightness on coral gives 90hz, below is 60hz. flame has some different tunings percentage wise, but same concept.
RefreshRate will work as soon as we have an official R image I can steal a single APK from.
We won't be implementing Squeeze or Soli most likely - it's RE, and given scrutiy over large projects and reverse engineered code, we likely won't see it unless it's reimplemented OSS (DU reverse-engineered it, but didn't clean room re-implement).
ahoslc said:
Smooth display is auto switching between 60hz and 90hz that's why I asked if just 90hz was working
Click to expand...
Click to collapse
It works.
ok well i went back to stock aug firmware and then flashed the img file, then sideloaded the rom, rebooted right into recovery and flashed gapps ... stuck on the lineage boot animation .. do i need to let it boot up then reboot into recovery and flash gapps?
tried again, flashed the image then rebooted to start menu, rebooted to recovery and flash mini gapps and rebooted ... still stuck on the boot logo
what am i missing?
somehow i got it to boot and had a trebucket error, installed a different launcher - FIXED.
can not finish setup, keep getting data transfer crash
anyone get TWRP to load? im using fsociety kernel and it worked on another ROM
Madjax2020 said:
ok well i went back to stock aug firmware and then flashed the img file, then sideloaded the rom, rebooted right into recovery and flashed gapps ... stuck on the lineage boot animation .. do i need to let it boot up then reboot into recovery and flash gapps?
tried again, flashed the image then rebooted to start menu, rebooted to recovery and flash mini gapps and rebooted ... still stuck on the boot logo
what am i missing?
somehow i got it to boot and had a trebucket error, installed a different launcher - FIXED.
can not finish setup, keep getting data transfer crash
anyone get TWRP to load? im using fsociety kernel and it worked on another ROM
Click to expand...
Click to collapse
You're going to have to skip that by disabling the app when it force closes . It should let you proceed from there on. TWRP won't work and idk why... Trebuchet launcher will FC as well but since Google home launcher is installed via gapps it should be a fail safe. As far as kernel, I am running kirisakura and it has the necessary things to work with TWRP but I won't. Trust me I tried.... Make sure to root with magisk canary .
To fix cts mismatch in magisk download termux
SU
props
And select option 2 forced basic key attestation
Select y for yes and proceed... Reboot and you should pass safety net checks...
Hit thanks if I helped .. one love
i42o said:
You're going to have to skip that by disabling the app when it force closes . It should let you proceed from there on. TWRP won't work and idk why... Trebuchet launcher will FC as well but since Google home launcher is installed via gapps it should be a fail safe. As far as kernel, I am running kirisakura and it has the necessary things to work with TWRP but I won't. Trust me I tried.... Make sure to root with magisk canary .
To fix cts mismatch in magisk download termux
SU
props
And select option 2 forced basic key attestation
Select y for yes and proceed... Reboot and you should pass safety net checks...
Hit thanks if I helped .. one love
Click to expand...
Click to collapse
thank you sir for the reply. However i could not get it to be stable. The initial setup failed no matter what i tried. The error of data tansfer tool would fail. I want to run this as it seemed very smooth, however i think i need to wait for another update or something. i followed the OP to the t and nothing seemed to work properly for me.
I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.
npjohnson said:
I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.
Click to expand...
Click to collapse
I'll try again thanks for the info
Seems the wiki says you can sideload gapps right after sideloading the OS, the OP said doing that causes issues lol. But he'll I'll try it anyway
npjohnson said:
I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.
Click to expand...
Click to collapse
Got this running great, with gapps. Was wondering if you're getting the issue I am with google assistant. It seems to freeze up and not be usable.
followed the wiki directions and used full gapps not nano ( missed that 1 bit of info ) im STILL getting data tansfer tool keps stopping when trying to finish the setup going to try a reboot and see what happens. it shows just a sec then saying looing for updates then installing updates and crashes ... then back t connect to wifi . does this have to do with the gapps?
SO ODD ... reflashed and used nano. asked to connecto to mobile data, nothing as showing up, hit skip, tried wifi and nada .... hit skip then same damn error for setup .... insane. maybe ill just cancel the setup and do everything manually
retied all steps and got the no space error when doing gapps, switched to slot b and tried again and it worked ... waiting to see the data tansfer error ... i dont think my phone wants to play nice lately, or ever.
went back to stock firmware, loaded the 9/6 lineageos and have NO mobile data with nano gapps loaded. doing the update currently and will update shortly what happens
i can officially state i am up and running with so far NO issues, i have mobile data, wifi sent texts and made a call. now going to root and swiftbackup restore all my apps and blah blah
Anyone tried the new 13th nightly? Hopefully they fixed the screen flicker.
Madjax2020 said:
followed the wiki directions and used full gapps not nano ( missed that 1 bit of info ) im STILL getting data tansfer tool keps stopping when trying to finish the setup going to try a reboot and see what happens. it shows just a sec then saying looing for updates then installing updates and crashes ... then back t connect to wifi . does this have to do with the gapps?
SO ODD ... reflashed and used nano. asked to connecto to mobile data, nothing as showing up, hit skip, tried wifi and nada .... hit skip then same damn error for setup .... insane. maybe ill just cancel the setup and do everything manually
retied all steps and got the no space error when doing gapps, switched to slot b and tried again and it worked ... waiting to see the data tansfer error ... i dont think my phone wants to play nice lately, or ever.
went back to stock firmware, loaded the 9/6 lineageos and have NO mobile data with nano gapps loaded. doing the update currently and will update shortly what happens
i can officially state i am up and running with so far NO issues, i have mobile data, wifi sent texts and made a call. now going to root and swiftbackup restore all my apps and blah blah
Click to expand...
Click to collapse
You do remember I said micro right? I specifically explained that by using nano you would have no cell phone connectivity and upon transfer tool just put no transfer
XMayhem2099 said:
Anyone tried the new 13th nightly? Hopefully they fixed the screen flicker.
Click to expand...
Click to collapse
Yes it is still there but much less now
Face unlock working?