So this morning I went to check on lineage OS news oh, and I found out that they released today for all pixels. I am running it with no issues although I would recommend to download the micro gapps package cuz if you do the Nano or anything below it will give you issues with your phone reading SIM card. Aside from that I had successfully running the rom with magisk installed.
Which versions of gapps did you try? Only nano/micro? I was thinking of selecting pico. Also, can you update via their in house ROM updater app while rooted?
Sent from my Pixel 4 XL using XDA Labs
bradical711 said:
Which versions of gapps did you try? Only nano/micro? I was thinking of selecting pico. Also, can you update via their in house ROM updater app while rooted?
Sent from my Pixel 4 XL using XDA Labs
Click to expand...
Click to collapse
Will there still wait to check to see if the updater works but it looks like everything is fully functional within it and right now, take a look at the picture that I'm going to attach to this that is her updater and it looks like it is completely 100% functional but I cannot be sure because there is no updates to test it with.
As far as the gapps go, don't use anything smaller than micro. There is something pixel 4 needs in telephony to work that is in micro+ but not in nano or pico ... If you flash rom without gapps , your phone will work to make calls, if you flash any gapps before micro, you will get a " insert SIM, emergency calls only " message.
After you flash rom, MAKE SURE TO REBOOT AND THEN FLASH GAPPS,! otherwise if you try to do it in the same session that you flashed ramen you will get a message telling you that you have insufficient storage to flash and it will fail to flash gapps!
A few things that I wish and I hope they do fix would be the 90 hertz implementation switch as of now there is no switch for it and the screen flickers at low brightness.
Soli gestures would be great, I know DU has them working so it's a matter of time before lineage does as well.... Same goes with the squeeze for assistant,.... It is also not working ..
Not working :
Soli gestures
Squeeze
Smooth display
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there
i42o said:
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there
Click to expand...
Click to collapse
Thank you for the detailed response!! I greatly appreciate all the info and I'm sure others will as well!:highfive: I will probably try it when the ROM becomes more stable. Currently on DU myself and I don't mind waiting until the project improves further. Would you mind letting us know in the thread how your first update goes while rooted? Thank you again for trying the legendary ROM and letting us know it was released!
Sent from my Pixel 4 XL using XDA Labs
bradical711 said:
Thank you for the detailed response!! I greatly appreciate all the info and I'm sure others will as well!:highfive: I will probably try it when the ROM becomes more stable. Currently on DU myself and I don't mind waiting until the project improves further. Would you mind letting us know in the thread how your first update goes while rooted? Thank you again for trying the legendary ROM and letting us know it was released!
Sent from my Pixel 4 XL using XDA Labs
Click to expand...
Click to collapse
Yeah, so after I installed it and set it up, I then adb sideloaded magisk canary on its stock kernel, it went thru like knife thru butter.
I then rebooted into android, finalized the magisk set up, rebooted and voila... I was rooted.... I then tried Kiri Kernel, since it has the necessary things for TWRP, flashed it within ex kernel and then tried to boot TWRP in bootloader only to get stuck on TWRP splash screen...
I was honestly trying to have lineage working with a working TWRP but unfortunately it did not work as such. So I gave up on the TWRP and I've been running the ROM with magic and modules installed with no hiccups The boot time is amazing battery life is really really good...
Viper worked first try... This has has to be one of three good roms out there with little to no issues.
DU
PIXEL DUST ( CAF )
LINEAGE
i42o said:
Yeah, so after I installed it and set it up, I then adb sideloaded magisk canary on its stock kernel, it went thru like knife thru butter.
I then rebooted into android, finalized the magisk set up, rebooted and voila... I was rooted.... I then tried Kiri Kernel, since it has the necessary things for TWRP, flashed it within ex kernel and then tried to boot TWRP in bootloader only to get stuck on TWRP splash screen...
I was honestly trying to have lineage working with a working TWRP but unfortunately it did not work as such. So I gave up on the TWRP and I've been running the ROM with magic and modules installed with no hiccups The boot time is amazing battery life is really really good...
Viper worked first try... This has has to be one of three good roms out there with little to no issues.
DU
PIXEL DUST ( CAF )
LINEAGE
Click to expand...
Click to collapse
Is 90hz working??
ahoslc said:
Is 90hz working??
Click to expand...
Click to collapse
Read just one or two more posts above the one you quoted to find your answer.
bradical711 said:
Read just one or two more posts above the one you quoted to find your answer.
Click to expand...
Click to collapse
Smooth display is auto switching between 60hz and 90hz that's why I asked if just 90hz was working
i42o said:
Will there still wait to check to see if the updater works but it looks like everything is fully functional within it and right now, take a look at the picture that I'm going to attach to this that is her updater and it looks like it is completely 100% functional but I cannot be sure because there is no updates to test it with.
As far as the gapps go, don't use anything smaller than micro. There is something pixel 4 needs in telephony to work that is in micro+ but not in nano or pico ... If you flash rom without gapps , your phone will work to make calls, if you flash any gapps before micro, you will get a " insert SIM, emergency calls only " message.
After you flash rom, MAKE SURE TO REBOOT AND THEN FLASH GAPPS,! otherwise if you try to do it in the same session that you flashed ramen you will get a message telling you that you have insufficient storage to flash and it will fail to flash gapps!
A few things that I wish and I hope they do fix would be the 90 hertz implementation switch as of now there is no switch for it and the screen flickers at low brightness.
Soli gestures would be great, I know DU has them working so it's a matter of time before lineage does as well.... Same goes with the squeeze for assistant,.... It is also not working ..
Not working :
Soli gestures
Squeeze
Smooth display
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there
Click to expand...
Click to collapse
90hz works, 70% plus brightness on coral gives 90hz, below is 60hz. flame has some different tunings percentage wise, but same concept.
RefreshRate will work as soon as we have an official R image I can steal a single APK from.
We won't be implementing Squeeze or Soli most likely - it's RE, and given scrutiy over large projects and reverse engineered code, we likely won't see it unless it's reimplemented OSS (DU reverse-engineered it, but didn't clean room re-implement).
ahoslc said:
Smooth display is auto switching between 60hz and 90hz that's why I asked if just 90hz was working
Click to expand...
Click to collapse
It works.
ok well i went back to stock aug firmware and then flashed the img file, then sideloaded the rom, rebooted right into recovery and flashed gapps ... stuck on the lineage boot animation .. do i need to let it boot up then reboot into recovery and flash gapps?
tried again, flashed the image then rebooted to start menu, rebooted to recovery and flash mini gapps and rebooted ... still stuck on the boot logo
what am i missing?
somehow i got it to boot and had a trebucket error, installed a different launcher - FIXED.
can not finish setup, keep getting data transfer crash
anyone get TWRP to load? im using fsociety kernel and it worked on another ROM
Madjax2020 said:
ok well i went back to stock aug firmware and then flashed the img file, then sideloaded the rom, rebooted right into recovery and flashed gapps ... stuck on the lineage boot animation .. do i need to let it boot up then reboot into recovery and flash gapps?
tried again, flashed the image then rebooted to start menu, rebooted to recovery and flash mini gapps and rebooted ... still stuck on the boot logo
what am i missing?
somehow i got it to boot and had a trebucket error, installed a different launcher - FIXED.
can not finish setup, keep getting data transfer crash
anyone get TWRP to load? im using fsociety kernel and it worked on another ROM
Click to expand...
Click to collapse
You're going to have to skip that by disabling the app when it force closes . It should let you proceed from there on. TWRP won't work and idk why... Trebuchet launcher will FC as well but since Google home launcher is installed via gapps it should be a fail safe. As far as kernel, I am running kirisakura and it has the necessary things to work with TWRP but I won't. Trust me I tried.... Make sure to root with magisk canary .
To fix cts mismatch in magisk download termux
SU
props
And select option 2 forced basic key attestation
Select y for yes and proceed... Reboot and you should pass safety net checks...
Hit thanks if I helped .. one love
i42o said:
You're going to have to skip that by disabling the app when it force closes . It should let you proceed from there on. TWRP won't work and idk why... Trebuchet launcher will FC as well but since Google home launcher is installed via gapps it should be a fail safe. As far as kernel, I am running kirisakura and it has the necessary things to work with TWRP but I won't. Trust me I tried.... Make sure to root with magisk canary .
To fix cts mismatch in magisk download termux
SU
props
And select option 2 forced basic key attestation
Select y for yes and proceed... Reboot and you should pass safety net checks...
Hit thanks if I helped .. one love
Click to expand...
Click to collapse
thank you sir for the reply. However i could not get it to be stable. The initial setup failed no matter what i tried. The error of data tansfer tool would fail. I want to run this as it seemed very smooth, however i think i need to wait for another update or something. i followed the OP to the t and nothing seemed to work properly for me.
I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.
npjohnson said:
I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.
Click to expand...
Click to collapse
I'll try again thanks for the info
Seems the wiki says you can sideload gapps right after sideloading the OS, the OP said doing that causes issues lol. But he'll I'll try it anyway
npjohnson said:
I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.
Click to expand...
Click to collapse
Got this running great, with gapps. Was wondering if you're getting the issue I am with google assistant. It seems to freeze up and not be usable.
followed the wiki directions and used full gapps not nano ( missed that 1 bit of info ) im STILL getting data tansfer tool keps stopping when trying to finish the setup going to try a reboot and see what happens. it shows just a sec then saying looing for updates then installing updates and crashes ... then back t connect to wifi . does this have to do with the gapps?
SO ODD ... reflashed and used nano. asked to connecto to mobile data, nothing as showing up, hit skip, tried wifi and nada .... hit skip then same damn error for setup .... insane. maybe ill just cancel the setup and do everything manually
retied all steps and got the no space error when doing gapps, switched to slot b and tried again and it worked ... waiting to see the data tansfer error ... i dont think my phone wants to play nice lately, or ever.
went back to stock firmware, loaded the 9/6 lineageos and have NO mobile data with nano gapps loaded. doing the update currently and will update shortly what happens
i can officially state i am up and running with so far NO issues, i have mobile data, wifi sent texts and made a call. now going to root and swiftbackup restore all my apps and blah blah
Anyone tried the new 13th nightly? Hopefully they fixed the screen flicker.
Madjax2020 said:
followed the wiki directions and used full gapps not nano ( missed that 1 bit of info ) im STILL getting data tansfer tool keps stopping when trying to finish the setup going to try a reboot and see what happens. it shows just a sec then saying looing for updates then installing updates and crashes ... then back t connect to wifi . does this have to do with the gapps?
SO ODD ... reflashed and used nano. asked to connecto to mobile data, nothing as showing up, hit skip, tried wifi and nada .... hit skip then same damn error for setup .... insane. maybe ill just cancel the setup and do everything manually
retied all steps and got the no space error when doing gapps, switched to slot b and tried again and it worked ... waiting to see the data tansfer error ... i dont think my phone wants to play nice lately, or ever.
went back to stock firmware, loaded the 9/6 lineageos and have NO mobile data with nano gapps loaded. doing the update currently and will update shortly what happens
i can officially state i am up and running with so far NO issues, i have mobile data, wifi sent texts and made a call. now going to root and swiftbackup restore all my apps and blah blah
Click to expand...
Click to collapse
You do remember I said micro right? I specifically explained that by using nano you would have no cell phone connectivity and upon transfer tool just put no transfer
XMayhem2099 said:
Anyone tried the new 13th nightly? Hopefully they fixed the screen flicker.
Click to expand...
Click to collapse
Yes it is still there but much less now
Face unlock working?
Related
Hey guys,
So here is a straight from source build of Android L, 5.0. I have not done anything beside build it from source and flash it. I have not done extensive testing on it.
So anyways, here is the link:
http://d-h.st/zi0
I have not included gapps or anything else. They will be coming soon. This build is primarily to play around with. I would not consider this a daily driver.
Issues:
Probably a ton, seeing as I have only checked if it boots.
I am not responsible for any issues this may cause or anything else that may happen to your tablet as a result of this.
I also have a ton of schoolwork and other things that keep popping up, so my support may be iffy. Please bear with me or go back to 4.4.4.
Here is a screenshot for proof:
https://www.dropbox.com/s/lnmhdapeemskggi/1743495_10153594576754572_4551962379003400239_n.jpg?dl=0
Future Plans for this Rom:
GApps are not yet possible on Lollipop as far as I can work out, due to the fact that baksmali and smali do not appear to play nicely with ART odex files. I will be rebuild the rom to be odexed and then including a gapps package.
XDA:DevDB Information
[Android 5.0] Straight from source ROM, ROM for the Nexus 7
Contributors
MidnightNinja
Version Information
Status: Testing
Created 2014-11-05
Last Updated 2014-11-04
Tried to adb side load and am getting No OS error. Will restore and try again on device
Sent from my A0001 using XDA Free mobile app
cchant said:
Tried to adb side load and am getting No OS error. Will restore and try again on device
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Hmm..let me know if you still have issues, because I was able to sideload on my device
Awesome!!
When first booted you need to erase it because it is encrypted. But after that it works (for now) like a charm. Wifi working, sound working.
The only problem so far is that after I installed the Play Store it didn't want to open but the Amazon app store works fine.
Niekhout02 said:
When first booted you need to erase it because it is encrypted. But after that it works (for now) like a charm. Wifi working, sound working.
The only problem so far is that after I installed the Play Store it didn't want to open but the Amazon app store works fine.
Click to expand...
Click to collapse
I am missing alot of the google stuff, which is probably why none of that works
That will come shortly, I just need to redo a lot of my vendor files and such to get gapps to be built in.
It worked even though it said no OS
first boot takes awhile but it works!
Confirmed it works.
Sideloading gapps for cyanogenmod 11 and hoping they auto update does not work. Worth a shot though. Time to reflash.
Woah, thanks a lot
Btw, how do I sideload gapps? (especially play store)
Since I think it won't be just installing apk, isn't it?
Working great! I think performance is even better than kitkat
Wi-Fi also working (maybe bluetooth, nfc and gps too)
StardustGeass said:
Woah, thanks a lot
Btw, how do I sideload gapps? (especially play store)
Since I think it won't be just installing apk, isn't it?
Click to expand...
Click to collapse
Flashing GApps is the solution. Sadly, there isn't a package for Lollipop GApps yet.
tatazeuz said:
Flashing GApps is the solution. Sadly, there isn't a package for Lollipop GApps yet.
Click to expand...
Click to collapse
I am currently working on the gapps, right now i have fixed my own build process and am getting a nexus 9 dump to try and fix it up.
MidnightNinja said:
I am currently working on the gapps, right now i have fixed my own build process and am getting a nexus 9 dump to try and fix it up.
Click to expand...
Click to collapse
Yay!
Works great, now waiting for gapps
thanks
Gapps mostly work fine if you edit updater.script
I've only had issue with the keyboard crashing so I'd suggest removing it from the gapps package before flashing.
Woah
I can't wait for the final version, this one, using 4.4.4 binaries, is crazy smooth. Google outdid theirselves on the optimization department.
Awesome work, think im gonna givebthis a try atbwork tomorrow.
What does work and what doesn't
basuraunak said:
What does work and what doesn't
Click to expand...
Click to collapse
So far, everything seems to be working. Have to check camera yet though.
I cant seem to get much else to go with it, but I will share my findings.
I can get TWRP to install,but then I get a bootloop.
If you use the Nexus Root Toolkit v 1.9.3 and "Root" with custom recovery checked. It freezes after trying to temporarily boot the modified boot image.
Hard reset the tablet and boot normally. The toolkit should reboot your tablet back into the bootloader and into TWRP, but this is only good for one boot.
If you mount /system and run a fix permissions, then it stays installed, but never gets past the boot screen.
It boots far enough to get into ADB.
Not sure what to try next though...
I was thinking if we could get a flashable zip without the stock recovery, then we may be able to keep TWRP, but I am not familiarwith building the flashable zips.
Wait, So how do you flash the google play services after you lose TWRP?! I don't understand..
Alright, This is just because I am trying to take precautions so that way I do not end up with a brick.
Currently I am rocking 5.1 PAC-MAN and things are going well. But LineageOS for MM for 6045 came already and I want to use that as my daily driver.
Here is where I run into a problem. For those of you that know I only have LP radios and modems on my system. Main problem I am having and is keeping me from flashing is the lack of a MM radio and or modem. Is there anyone that is on 6045O that had tried this out without having that lockscreen problem?
If you don't flash the MM radios, you will end up with lock screen issues, unfortunately.
-EDIT-
So apparently I can't read. I have the 6045O and this link has the correct modem files to fix the lock screen issues.
https://mega.nz/#F!u0UBAICD!DzKYnswfK5J6dw5WQNgEDg
6.0.1 modem is the file you need.
magus7091 said:
If you don't flash the MM radios, you will end up with lock screen issues, unfortunately.
-EDIT-
So apparently I can't read. I have the 6045O and this link has the correct modem files to fix the lock screen issues.
https://mega.nz/#F!u0UBAICD!DzKYnswfK5J6dw5WQNgEDg
6.0.1 modem is the file you need.
Click to expand...
Click to collapse
Attempted. Everything but the pin issue is good. Weird how it trips badly with the PIN. Installing SuperSU as we speak.
EDIT: Looped after SuperSU flash..
EDIT2: Going back to 5.1. Thank you very much for the support.
Huskied said:
Attempted. Everything but the pin issue is good. Weird how it trips badly with the PIN. Installing SuperSU as we speak.
EDIT: Looped after SuperSU flash..
EDIT2: Going back to 5.1. Thank you very much for the support.
Click to expand...
Click to collapse
While playing around with ROMs for the phone I had some odd issues here and there. As far as the SuperSU flash, it almost always loops a couple times during the reboot process, but I've switched to the lineageOS official su addon because I like native support and root management. Also it never did those initial boot loops. When I did have an issue (just recently, in fact) I ran a wipe of the system partition, then installed the rom, and ran the repair file system option in TWRP, and since then it's been smooth as butter. If you're interested in giving it another go, just let me know and I should be able to link you the files, as they're on my google drive.
magus7091 said:
While playing around with ROMs for the phone I had some odd issues here and there. As far as the SuperSU flash, it almost always loops a couple times during the reboot process, but I've switched to the lineageOS official su addon because I like native support and root management. Also it never did those initial boot loops. When I did have an issue (just recently, in fact) I ran a wipe of the system partition, then installed the rom, and ran the repair file system option in TWRP, and since then it's been smooth as butter. If you're interested in giving it another go, just let me know and I should be able to link you the files, as they're on my google drive.
Click to expand...
Click to collapse
May I ask one more thing? Have you ever gotten the PIN lock or password or pattern lock to work?
EDIT: Nvm. Using Hi-Locker for now. All is good.
I use a pattern lock on mine, and after flashing the modem files, the lock screen functions as it should with all methods. Consider re-flashing the modem and ROM if you get to where you want to play with it, full wipe prior, no dirty flash.
This is not a guide as such but more of direction to other peoples hard work and effort. I am not a developer, just an experimenter!
Main Credits - @MishaalRahman and @phhusson.
For me one of the main selling points of the Mediapad M5 was being Project Treble enabled. Being a big Nexus/Pixel fan I am not particularly fond of EMUI.
So after reading this detailed and clear guide by Mishaal Rahman http://www.xda-developers.com/flash-generic-system-image-project-treble-device/, I was able to successfully install an AOSP Generic System Image by phhusion http://forum.xda-developers.com/project-treble/trebleenabled-device-development/experimental-phh-treble-t3709659
My device - CMR-W09 (10.8" non pro wifi).
I flashed v17 with Gapps and SU and apart from an Android System error upon boot it seems to work ok. I have not had much time to play with it but so far Wifi, Bluetooth, sound, camera, fingerprint sensor, MTP and SD card appear to be working. I had issues with google play not downloading apps but worked after clearing data/cache on google play and google play services. Also have issues with superuser force closing.
For the nervous and unsure, you can easily return to stock Huawei firmware by flashing your devices stock system.img in fastboot.
Obviously bootloader needs to be unlocked see guide - https://forum.xda-developers.com/mediapad-m5/how-to/bootloader-unlock-guide-t3781275 by @Apo11on. You can use Apo11on's root guide to download your firmware to get your stock system.img.
OEM needs to be disabled in developer options.
It is best to factory reset via recovery mode and then boot straight into bootloader to keep FRP unlocked.
Do this at your own risk but please read all the available information and guides on XDA.
pphusion has made other Project Treble roms but I have yet to try them. Hopefully it would be nice if someone could fully develop Lineage for this device.
which rom did you use ? the A/B one or A only ?
It's an A-only device.
I tried AOSP with GAPPS and SU but SuperSU shows the su binary as being occupied through several reboots. Getting the Lineage GSI now and will root with magisk.
Edit:
Blah... Lineage is not an option until we have twrp :/ (at least for me) No way to install GAPPS.
Edit:
SU works with phh's super user available from the play store.
Yes i have the AOSP one now on my AL-09 and it works fine till now. Bugs : home Button not working but fingerprint works, supersu with the phhs one works. Bluetooth sometimes gives an error message. Battery drain is a little bit high. I installed the Huawei camera apk from treble forum and This works also good.
Another Bug is Apps sometimes force closing but Not often.
How is Lineage performing?
A little bit off topic, but how did you unlock the bootloader on the Wifi only version since the website for the code is offline for a few weeks now?
Thanks in advance.
Fantastic to see that Treble works.
On my AL09(ASOP with gapps and su) bluetooth never connects to any of my devices and fc on pairing.
Lineage was a non-starter, since I was unable to get gapps running. I was also getting a vendor mismatch toast. I'm back on the stock .125(C00), no working tether is infinitely more useable than no BT.
It was nice to be able to flash something that didn't brick it and was partially useable.
fargonaz said:
On my AL09(ASOP with gapps and su) bluetooth never connects to any of my devices and fc on pairing.
Lineage was a non-starter, since I was unable to get gapps running. I was also getting a vendor mismatch toast. I'm back on the stock .125(C00), no working tether is infinitely more useable than no BT.
It was nice to be able to flash something that didn't brick it and was partially useable.
Click to expand...
Click to collapse
I understand, Do you think it gets more stable for our device in the future?
florian-m19 said:
I understand, Do you think it gets more stable for our device in the future?
Click to expand...
Click to collapse
I think so, if you look at the github comments there is a huawei phone having the same problem, so as long as a phone is having problems it should get fixed
We would like some screenshots to see if this is real @AndDiSa @rcstar6696 @phhusson @MishaalRahman
Just installed it, attached a few screenshots. Haven't tested it a lot, but it boots.
Wie are Not joking, its real ??
Delete, double post
I will be getting my Mediapad M5 8.4 tomorrow and will be flashing the AOSP treble build straight away. Just a heads up a updated build has just been posted with some Huawei related fixes.
i flash it now, and give feedback tomorrow
I flashed the new one with gapps and su, and for the sht-l09 there is no working bluetooth, so that's as far as I go. It will be nice when the BT is fixed for this device.
Works good with dirty flash, Home Button is working now and also Automatic Brightness, but battery draining is really high and it gets hot.
florian-m19 said:
Works good with dirty flash, Home Button is working now and also Automatic Brightness, but battery draining is really high and it gets hot.
Click to expand...
Click to collapse
Have you tried changing the cpu governor? Is it set to something like interactive? I got my Mediapad today but I am waiting for the bootloader unlock code from Huawei.
darren1 said:
Have you tried changing the cpu governor? Is it set to something like interactive? I got my Mediapad today but I am waiting for the bootloader unlock code from Huawei.
Click to expand...
Click to collapse
yes it is on interactive, should i change this ?
florian-m19 said:
yes it is on interactive, should i change this ?
Click to expand...
Click to collapse
Might be worth experimenting with. Try conservative or ondemand if they are available. You can always change back if it doesn't make any difference.
darren1 said:
Might be worth experimenting with. Try conservative or ondemand if they are available. You can always change back if it doesn't make any difference.
Click to expand...
Click to collapse
okay i change it in helix engine to ondemand and the suspend engine is now on powersafe.
Hey guys., I have the power, and unlocked bootloader, it took a minute because in or of practice, but on stock ROM was able to install twrp, and magisk and rooted. I made a backup. Phone was running fine. I Dodd something and now my back up well not load. Also this a/ b slot thing is ffing with me. I followed guides, but still don't quite get it. I'm running RR official right now, and it works. But I don't believe it's fine correctly. How can I get my backup to work, and clear things. I mean a 3 gig install should not be using 9 gigs.
Lunartss said:
Hey guys., I have the power, and unlocked bootloader, it took a minute because in or of practice, but on stock ROM was able to install twrp, and magisk and rooted. I made a backup. Phone was running fine. I Dodd something and now my back up well not load. Also this a/ b slot thing is ffing with me. I followed guides, but still don't quite get it. I'm running RR official right now, and it works. But I don't believe it's fine correctly. How can I get my backup to work, and clear things. I mean a 3 gig install should not be using 9 gigs.
Click to expand...
Click to collapse
If you goal is to use the device in an unlocked state you don't really need to worry about a stock backup it is good you took one but still. I wouldn't know why your backup would restore unless the device is encrypted. However all you should really need to do to get things going on Resurrection Remix is do an advanced wipe of everything and then flash rom+ gapps then setup afterwards flash magisk and you're off. If internal storage is an issue consider a different rom or gapps package Rr is a big rom with lots of customizations I'm not saying there isn't any issue but it would take up some room thats for sure.
Cheers!
why is no one discussing stable android 11 for op7p ? got my update round 3 a.m. this morning. been searching all day for a working twrp since the stable android 11 been released. no luck though......
Hi,
Today I installed the update manually and my phone keeps flashing the TWRP load-screen at boot. It's stuck now. Is that because there is no compatible TWRP version yet? How do I fix this?? Any idea?
There is no working TWRP yet for Android 11. You'll need to flash the stock boot.img or rooted boot.img from one of the threads in the news, guides section.
Edit: TWRP screen flashing is because it's incompatible. I had the same issue on the open betas.
Have the exact same issue as above, Twrp screen flashing, cannot boot back to normal even with adb... anybody has a rooted boot.img link that knows works with Android 11?
Should have checked on xda first *slaps his face*
Always check xda first *slaps his face again*
EDIT: For other poor saps with this issue use this -> https://www.androidfilehost.com/?fid=2188818919693770594 I didnt managed to get booted with rooted img but the original boot img file worked well ... at least I got a phone now...
im on 10.3.8 and rooted..
can i just do the same old process.. twrp isnt an issue as long as may apps are safe and root..
santiagoruel13 said:
im on 10.3.8 and rooted..
can i just do the same old process.. twrp isnt an issue as long as may apps are safe and root..
Click to expand...
Click to collapse
No, its not the same process.... For me for example I couldnt get wifi to actually work on rooted image AND you lose the ability to do backups via TWRP..... Refer here for the latest on this: https://forum.xda-developers.com/t/...p-recovery-for-oneplus-7-pro.3931322/page-153
dejjem said:
No, its not the same process.... For me for example I couldnt get wifi to actually work on rooted image AND you lose the ability to do backups via TWRP..... Refer here for the latest on this: https://forum.xda-developers.com/t/...p-recovery-for-oneplus-7-pro.3931322/page-153
Click to expand...
Click to collapse
I mean.. same steps.. that ive used so far amd retain its root.
1. Download rom via o2 updater
2. Flash it via local update
3. Install magisk to inactive slot
4. Reboot.
So if i do this.. wifi wont work??? Is that it???
Finished updating my phone..after downloading it for about 2 hours.
And im quite satisfied with the results. No problems whatsoever..
Glad for you... You probably had already removed the encryption on your mobile... from what I'm reading that is the main incompatibility issue with TWRP...
FWIW after playing around for a day, I had to revert everything Phone wifi was weird (weirder with root and all mods disabled) and system was a little unstable in some 3p apps and there seems to be some bugs with the phone screen 60/90 refresh... Gonna wait a bit to update again.
dejjem said:
Glad for you... You probably had already removed the encryption on your mobile... from what I'm reading that is the main incompatibility issue with TWRP...
FWIW after playing around for a day, I had to revert everything Phone wifi was weird (weirder with root and all mods disabled) and system was a little unstable in some 3p apps and there seems to be some bugs with the phone screen 60/90 refresh... Gonna wait a bit to update again.
Click to expand...
Click to collapse
i dont mind not having TWRP for the meantime,, i just used TWRP previously for flashing CUSTOM kernels.. hehehehe.
anyways, what problem have you encountered regarding wifi?? i dont seem to experience those,, maybe because i came from stable oos 10.3.8..
what app crashed and problems have you encountered???