Hello,
I have pb with my wiko rainbow. I installed a Fresh Custom Rom and Beanstalk downloaded from smokerman website.
Everything going OK. But last few days when i restart or shutdown smartphone, he didn't start.
When i plug it in my Desktop PC, i listen bips and Mediatek USB Port is shown in Devices.
I tried to flash it with SPFlashtool like always but an error message is shown "sp flash tool 3167 error".
Please Help me..
Thanks..
problem with my wiko rainbow
hello everybody i have one wiko phone model rainbow coral.it block on rainbow when the phone starts. How can i fix it
Related
hello friends. my micromax canvas 2 plus is not running now... i am looking forward to find this solution as early as possible
my micromax canvas 2 plus is not running now, it shows only canvas logo and nothing appears, and this all happens because today i tired to install new ROM - Color-Os_V.1.2_3.zip, for that, i follow all steps from
http://forum.xda-developers.com/mic...tom-rom-color-os-rom-micromax-canvas-t2585464
, but not able to install.. during recovery mode i got error that update is abort ... i thought that may be increasing partition will help so i tried using SP flash on window xp and followed steps as discuss
http://forum.xda-developers.com/mic...q-canvas-2-t2568182/post48447661#post48447661
but after that i got "sp flash tool error 8038" and since not able to run canvas 2 plus, it shows only canvas logo and nothing happens
when i tried to use recovery mode again by pressing together "power, + volume, - volume button" i see that error saying not able to
E mount sd card
please help me friends
i think i might have done something wrong
i guess i did format first by using SP FLASH .... please someone provide me files that i need to install using SP FLASH
prakash001 said:
hello friends. my micromax canvas 2 plus is not running now... i am looking forward to find this solution as early as possible
my micromax canvas 2 plus is not running now, it shows only canvas logo and nothing appears, and this all happens because today i tired to install new ROM - Color-Os_V.1.2_3.zip, for that, i follow all steps from
http://forum.xda-developers.com/mic...tom-rom-color-os-rom-micromax-canvas-t2585464
, but not able to install.. during recovery mode i got error that update is abort ... i thought that may be increasing partition will help so i tried using SP flash on window xp and followed steps as discuss
http://forum.xda-developers.com/mic...q-canvas-2-t2568182/post48447661#post48447661
but after that i got "sp flash tool error 8038" and since not able to run canvas 2 plus, it shows only canvas logo and nothing happens
when i tried to use recovery mode again by pressing together "power, + volume, - volume button" i see that error saying not able to
E mount sd card
please help me friends
Click to expand...
Click to collapse
Proper drivers were not installed while flashing... Install the drivers and try again, else directly flash the stock rom using this guide www.droidarena.in/Thread-Stock-ROM-for-Micromax-Canvas-2-Plus-A110Q
Even I had bricked my phone partitioning once because of no proper driver...
IF nothing helps service centre is always there Good Luck
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Please I need some working link to ROM to this phone , I tried lots of roms and always says "Enable DRAM Failed", drivers are alright and preloader working(appears in device manager). i tried also firmware upgrade but nothing works I think because this mobile is clone and has different rom from original A850. As you can see at the front of mobile is placed home not lenovo logo (at down in middle of digitizer) . Also tried different version of SP Flash tools but all said the same error. In other way I tried push buttons before connecting to pc still the same. I check the procesor and is MTK6582, has kcolo point but preloader working so its dont needed now. Thank for your time and hope somebody for help!
back of phone https://postimg.org/image/h7igdxesz/
Front of phone https://postimg.org/image/6ypz83qr7/
Battery case https://postimg.org/image/8f1hq8to3/
Placeboard(DPS) https://postimg.org/image/bn5z3afxv/
Hi there,
Please I have a Samsung tablet
SM-T311 didn't know its a clone phone, always having a problem with space, so I tried to format and clear cache, it got stocked on Android logo, so I used sp flash tool which let me to a dark screen, but PC can dictate device, it makes a sound when I plug device to PC, and after a few minutes, sound will signal again as when you unplug device. Please I need a firmware to this device please, I got one when I tried to use via sp tool, I got an error message
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL"
Please I need a firmware . device is a clone SM-T311 tablet mtk 6582 running on android 4.2.2 jelly bean.
Please help!!!!