phone is not detected by the pc
and bootloop issue
how to fix pls help:crying::crying::crying::crying:
anil9907 said:
phone is not detected by the pc
and bootloop issue
how to fix pls help:crying::crying::crying::crying:
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately there is no information about your device on xda. Can you get into download or recovery mode ? Maybe then the pc might recognise it through adb/fastboot
Good Luck
Sawdoctor
Bro I have tried fastboot mode
But the PC won't recognize it
And there is no recovery mode too
Related
i am trying to unbrick a thl w100s . i install the drivers for win 7 . the problem is when i connect the phone to pc i have continuously connect and disconect. so flash tool cant work.
how can i lock the connection between phone and pc?
thank you
bandi650 said:
i am trying to unbrick a thl w100s . i install the drivers for win 7 . the problem is when i connect the phone to pc i have continuously connect and disconect. so flash tool cant work.
how can i lock the connection between phone and pc?
thank you
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
I couldn't find your device so i suggest you to head over Android Q&A, Help & Troubleshooting"]here[/URL] in order to get better help.
Good luck!
Hello,
My Huawei y511 was working fine but last night it just shut down and when I connect it to charger it just shows huawei logo and then dissapers and it keep on going the same..
When I connect it to a windows pc , there just comes the windows usb connection sound and after it the disconnection sound....
I am using windows 10 64-bit ... I have downloaded sp tool and huawei y511 -u30 firmware also but it shows time out or no responce error...
I also have installed vcom mtk drivers (by turning of windows driver signature) but it also does not worked......
Any one has the solution for it ....
Thanks in advance
jazibzps said:
Hello,
My Huawei y511 was working fine but last night it just shut down and when I connect it to charger it just shows huawei logo and then dissapers and it keep on going the same..
When I connect it to a windows pc , there just comes the windows usb connection sound and after it the disconnection sound....
I am using windows 10 64-bit ... I have downloaded sp tool and huawei y511 -u30 firmware also but it shows time out or no responce error...
I also have installed vcom mtk drivers (by turning of windows driver signature) but it also does not worked......
Any one has the solution for it ....
Thanks in advance
Click to expand...
Click to collapse
Greetings and welcome to assist. You have downloaded everything I would have suggested already, have you tried a hard reset and booting into recocery ? There is this thread I found that may help
http://forum.xda-developers.com/showthread.php?t=2715209
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome to assist. You have downloaded everything I would have suggested already, have you tried a hard reset and booting into recocery ? There is this thread I found that may help
http://forum.xda-developers.com/showthread.php?t=2715209
Good Luck
Sawdoctor
Click to expand...
Click to collapse
Thank you for your kind reply ...
But i had recovered it by sptool.. Initially the phone was not responding to windows but then i installed the mediatek vcom drivers and after it formated and then flashed it
jazibzps said:
Thank you for your kind reply ...
But i had recovered it by sptool.. Initially the phone was not responding to windows but then i installed the mediatek vcom drivers and after it formated and then flashed it
Click to expand...
Click to collapse
That's great news, glad you fixed it
Hello, I accidentally bricked my phone by copying and pasting a build.prop file with root. My pc doesnt recognize my phone when I use a usb cable. I've already tried using fastboot and ADB but that also didn't work. Is there a way the recover it?
XDA Visitor said:
Hello, I accidentally bricked my phone by copying and pasting a build.prop file with root. My pc doesnt recognize my phone when I use a usb cable. I've already tried using fastboot and ADB but that also didn't work. Is there a way the recover it?
Click to expand...
Click to collapse
Greetings and welcome to assist. If you can get into download mode then kies/smart switch emergency firmware recovery will return your phone to factory settings
Good luck
Sawdoctor
Hi, REALLY hope someone can help here!
Elephone p9000.
I am trying to connect the phone to laptop in order to run SP flash. I can connect with the phone on (listed as p9000 in dev mngr). However when turned off the connection goes away.
I have: downloaded and installed vcom, cdc and usb drivers
Turned off digital installation from recovery on laptop
Trued the drivers in win 10
This is driving me nuts so really hoping for help!
many thanks in advance
dhylly said:
Hi, REALLY hope someone can help here!
Elephone p9000.
I am trying to connect the phone to laptop in order to run SP flash. I can connect with the phone on (listed as p9000 in dev mngr). However when turned off the connection goes away.
I have: downloaded and installed vcom, cdc and usb drivers
Turned off digital installation from recovery on laptop
Trued the drivers in win 10
This is driving me nuts so really hoping for help!
many thanks in advance
Click to expand...
Click to collapse
Greetings and welcome to assist. Have you enabled usb debugging in settings and put the phone in recovery/download mode
Regards
Sawdoctor
sawdoctor said:
Greetings and welcome to assist. Have you enabled usb debugging in settings and put the phone in recovery/download mode
Regards
Sawdoctor
Click to expand...
Click to collapse
thanks for the response. The p9000 will not go in to recovery mode without twrp - i can only get factory mode and this doesnt work either. It is set for usb debugging. It seems it is an issues with windows 10. fuggingtyfuggityfug
Hello,
I have a Pro 3 X720, when I connect my phone to my PC via USB, I do not have the MTP mode. I can not find a solution anywhere.
I can not find the right drivers for my phone.
Can a charitable soul help me?
I'm lost
Help
packat10290 said:
Hello,
I have a Pro 3 X720, when I connect my phone to my PC via USB, I do not have the MTP mode. I can not find a solution anywhere.
I can not find the right drivers for my phone.
Can a charitable soul help me?
I'm lost
Help
Click to expand...
Click to collapse
Greetings and welcome to assist. Have you tried this toolkit to see if this works
https://forum.xda-developers.com/le-2/development/leeco-aio-toolkit-t3471405
Good luck
Sawdoctor