so my mi4i is stuck in boot loop i flashed the stock firmware miui 6 using miflash . my volume down buttons dead so i cant use it to boot in fastboot . i could go in recover (stock ) at best .
You can use adb commands to boot into fastboot mode. Check Google for instructions.
hell1134 said:
You can use adb commands to boot into fastboot mode. Check Google for instructions.
Click to expand...
Click to collapse
kanishk @Mi4i said:
so my mi4i is stuck in boot loop i flashed the stock firmware miui 6 using miflash . my volume down buttons dead so i cant use it to boot in fastboot . i could go in recover (stock ) at best .
Click to expand...
Click to collapse
According to what he said open a terminal and type adb reboot-bootloader
But u must have adb drivers installed. But without booting into Android I don't think ADB will work
If this does not work try booting into recovery and check if ADB works. Good luck!
sharan.nyn said:
According to what he said open a terminal and type adb reboot-bootloader
But u must have adb drivers installed. But without booting into Android I don't think ADB will work
If this does not work try booting into recovery and check if ADB works. Good luck!
Click to expand...
Click to collapse
thanks .
PC can read my internal storage when i reboot to recovery mode [[in this case i'm using TWRP, i'm not sure whether stock recovery is readable too]] as long as the usb driver have installed on my PC .
Try it, if you can acces your internal storage on your PC, you can download your device ROM and flash it via recovery .
Related
Hy I have a htc one mini that is stuck in bootloader and when i select anything from the bootloader menu it is freezing
please help
botioni said:
Hy I have a htc one mini that is stuck in bootloader and when i select anything from the bootloader menu it is freezing
please help
Click to expand...
Click to collapse
hi bro
when you are on bootloader and if you tried to get into fastboot : it get freeze before you enter into fastboot mode or after ?
and try to plug your phone on pc even if it is freezing maybé you can still use fastboot or ADB command !!
mayafthecool said:
hi bro
when you are on bootloader and if you tried to get into fastboot : it get freeze before you enter into fastboot mode or after ?
and try to plug your phone on pc even if it is freezing maybé you can still use fastboot or ADB command !!
Click to expand...
Click to collapse
it gets freezed before it enters fastboot mode .
the pc isent reconizing the phone
botioni said:
it gets freezed before it enters fastboot mode .
the pc isent reconizing the phone
Click to expand...
Click to collapse
hi
sorry but i don't have any idea about your probleme
good luck
mayafthecool said:
hi
sorry but i don't have any idea about your probleme
good luck
Click to expand...
Click to collapse
thanks aniway
Hello botioni. First of all make sure you have installed adv drivers and Google's usb driver to make your phone be recognised from the pc. Also I would like to ask if you are able to enter recovery, cause as you have mentioned in the thread you can't access fastboot( freezing issues). If you can then there are three things you must do.. The first one is to fully wipe you phone storage and system then follow these steps. Download the mini ask ( search it on Google) and when you do this go to the folder you downloaded and open a command window with Shift+right click. On the cmd window write the following:
adb shell
mkdir -p data/media/0
Exit
Then restart recovery in order for data to be mounted
Assuming that you have downloaded a Rom for your phone you can install it either by pushing it using the command adb push Rom.zip (where Rom zip your Rom's name) or you can use adb sideload Rom.zip from the sideload function of the recovery ( advanced--> sideload). Hope I helped
Did the suggestion mentioned above worked for anyone?
I was trying to flash a custom ROM on my moto g xt1033. I used choosing the zip from USB otg after wiping and formatting everyrhing but. It flashed but a black screen came instead of cm logo and I was stuck at welcome to cm screen without touchscreen working. http://forum.xda-developers.com/mot...4-4-4-help-t3019082/post58587594#post58587594
Then I tried side loading or pushing method. But problem is adb commands are not working in fastboot mode. They are working when phone is switched on. (Adb devices show serial number and device in normal mode) Fastboot commands are working fine in fastboot mode but not adb. When I type adb devices in fastboot mode there is nothing after list of device attached. So adb push or adb side load give me waiting for device or device not found result. Is it normal. Earlier I have latest Motorola device manager and latest android SDK. Tried uninstalling and installing them, tried changing USB ports, tried rebooting the phone and restarting windows pc several times but still no luck.!!
Yes, it's normal that ADB commands do not work in Fastboot mode. But you can access custom recovery from the fastboot screen.
@lost101 if adb commands do not work in fastboot mode then how "adb sideload" works when we clean install a ROM? Many threads at XDA say it should work
Guru.Eclairs said:
@lost101 if adb commands do not work in fastboot mode then how "adb sideload" works when we clean install a ROM? Many threads at XDA say it should work
Click to expand...
Click to collapse
You have to be in a custom recovery (TWRP, CWM, Philz Touch) and enable the 'adb sideload' option.
lost101 said:
You have to be in a custom recovery (TWRP, CWM, Philz Touch) and enable the 'adb sideload' option.
Click to expand...
Click to collapse
I have latest philz touch. Also tried twrp..but adb still not working in fastboot mode or recovery mode. The device disappears from My Computer area when in fastboot
Guru.Eclairs said:
I have latest philz touch. Also tried twrp..but adb still not working in fastboot mode or recovery mode. The device disappears from My Computer area when in fastboot
Click to expand...
Click to collapse
It doesn't work on all versions of Windows; I think I've had it working in Windows 7. But I mainly use it in Linux - where no driver is required.
I also have windows 7.. Thanks Anyway
Guru.Eclairs said:
I also have windows 7.. Thanks Anyway
Click to expand...
Click to collapse
It's a driver issue. Your phone is not being recognised. If you boot a Linux LiveCD from DVD / USB, you can access recovery mode ADB that way.
sudo apt-get install android-tools-fastboot
Not sure if this will help but, after completely wiping my phone, I installed TWRP using fastboot commands, booted to TWRP, mount, copy ROM to moto g, and install using TWRP.
If you are in fastboot mode, type fastboot devices and see what happens.
audit13 said:
Not sure if this will help but, after completely wiping my phone, I installed TWRP using fastboot commands, booted to TWRP, mount, copy ROM to moto g, and install using TWRP.
If you are in fastboot mode, type fastboot devices and see what happens.
Click to expand...
Click to collapse
Fastboot Devices command works flawlessly in fastboot mode. I can flash .IMG files. But none of adb commands working. When I type adb devices there is no result after List of Devices attached. So I can't sideload anything
I'm not 100% sure how adb works on the moto g but I don't think adb commands work in fastboot mode. When I connect my moto G to my computer after the ROM has booted and I am at the phone's desktop, I type "adb devices" and I see my device listed. Then I type "adb reboot-bootloader" to get into fastboot mode and adb commands no longer work.
I have Philz Touch on my Moto G and sideloading is an option. I don't think you can side load from fastboot.
audit13 said:
I'm not 100% sure how adb works on the moto g but I don't think adb commands work in fastboot mode. When I connect my moto G to my computer after the ROM has booted and I am at the phone's desktop, I type "adb devices" and I see my device listed. Then I type "adb reboot-bootloader" to get into fastboot mode and adb commands no longer work.
I have Philz Touch on my Moto G and sideloading is an option. I don't think you can side load from fastboot.
Click to expand...
Click to collapse
If adb doesn't work in fastboot mode then whats the propose of word "sideload"
Guru.Eclairs said:
If adb doesn't work in fastboot mode then whats the propose of word "sideload"
Click to expand...
Click to collapse
I have no idea as I have never used adb to install anything except apk files when the phone has been booted to the desktop.
I always use fastboot commands to install recovery and install stock ROMs.
Using adb to side load may refer to the aibility to install files while the phone is running.
http://www.geek.com/mobile/what-is-adb-and-how-do-i-use-it-1461697/
audit13 said:
I have no idea as I have never used adb to install anything except apk files when the phone has been booted to the desktop.
I always use fastboot commands to install recovery and install stock ROMs.
Using adb to side load may refer to the aibility to install files while the phone is running.
http://www.geek.com/mobile/what-is-adb-and-how-do-i-use-it-1461697/
Click to expand...
Click to collapse
OK leave it. Do you have any idea how to increase 2g/3g speed. Any trick/mod/script?? I flashed cm11 quarx build and internet is painfully slow
Edit- no sideload means pushing a flashable zip to the root of internal storage when phone is in recovery mode. We do it for clean installing ROMs.(Format and wipe everything). After format there is no operating system left in phone so we do sideload rom
Guru.Eclairs said:
OK leave it. Do you have any idea how to increase 2g/3g speed. Any trick/mod/script?? I flashed cm11 quarx build and internet is painfully slow
Edit- no sideload means pushing a flashable zip to the root of internal storage when phone is in recovery mode. We do it for clean installing ROMs.(Format and wipe everything). After format there is no operating system left in phone so we do sideload rom
Click to expand...
Click to collapse
Sorry, I don't know how to increase speed except try a different radio/modem on your phone. I rarely use data on my phone because I have an iPad with LTE.
Guru.Eclairs said:
Fastboot Devices command works flawlessly in fastboot mode. I can flash .IMG files. But none of adb commands working. When I type adb devices there is no result after List of Devices attached. So I can't sideload anything
Click to expand...
Click to collapse
Sounds like your fastboot driver is working fine but your adb driver is not...go into your custom recovery and then check Device Manager in Windows to see if you have all your drivers working properly.
If you are having adb driver issues you could try the Universal adb driver setup file attached.
adb commands don't work in fastboot mode. Install a recovery (Preferably TWRP because I forget how CWM's adb sideload works). For TWRP, go to advanced, then adb sideload. Make sure to install the adb drivers tho, or else the sideload won't work. If you're sticking with stock, press the Vol+ button for about 15 secs, then tap the power button. Use the Vol- and + keys too scroll. There should be an option like "Install firmware through adb" or something. Scroll to that, then hit the power button to go to that option. Then, just sideload the firmware.
Check device manager 1st phone is conected properly
adb has no relation to fastboot.adb will not work while in fastboot, it never worked that way either.
There is no sideload while in fastboot, you're confusing it with the adb sideload, that has nothing to do with fastboot.
Reading and comprehension are desirable here.
Hi guys,
I have a rooted Device with CM and TWRP installed, but someting happenend using the device and my Moto G got stuck on startup logo and Recovery TWRP logo, with adb I have acess to adb shell but everything else like adb reboot bootloader etc doesn't seems to work, with adb shell I have realized that the TWRP wasn't running 'cause when I use the interface on shell I get this message
$twrp wipe cache
"TWRP does not appear to be running. Waiting for TWRP to start"
Is there any way to install a new recovery via adb shell or reinstall a new rom, factory reset or something like that to make my cellphone work again?
Thanks,
If you are okay to wipe internal storage, the following fastboot command will probably make TWRP load again:
fastboot erase userdata
fastboot flash recovery newrecovery.img - is a way to reflash recovery, however the above command may still be required.
The problem is that with fastboot the device is not recognized, only when I open the recovery mode...
The logo freezes but the device is reconigzed with adb devices...
gconsentini said:
The problem is that with fastboot the device is not recognized, only when I open the recovery mode...
The logo freezes but the device is reconigzed with adb devices...
Click to expand...
Click to collapse
What OS are you using? Maybe try the ADB commands:
adb shell
wipe data
lost101 said:
What OS are you using? Maybe try the ADB commands:
adb shell
wipe data
Click to expand...
Click to collapse
It's the latest CM
I'll try, but the last time I got this message.
"TWRP does not appear to be running. Waiting for TWRP to start . . .
Press CTRL + C to quit."
EDIT
using
adb shell
twrp wipe data
happened the same above
gconsentini said:
It's the latest CM
I'll try, but the last time I got this message.
"TWRP does not appear to be running. Waiting for TWRP to start . . .
Press CTRL + C to quit."
EDIT
using
adb shell
twrp wipe data
happened the same above
Click to expand...
Click to collapse
I meant what OS on PC are you using. Stop adding the phrase 'twrp' - type the command as I wrote it.
lost101 said:
I meant what OS on PC are you using. Stop adding the phrase 'twrp' - type the command as I wrote it.
Click to expand...
Click to collapse
Sorry, I'm using Windows 10, if I use only wipe data, the command wipe is not reconigzed.
Can you enter fastboot mode by holding vol down and powering phone on?
lost101 said:
Can you enter fastboot mode by holding vol down and powering phone on?
Click to expand...
Click to collapse
yes, but when I connect the phone usb and use fastboot devices
it has no devices on the list
gconsentini said:
yes, but when I connect the phone usb and use fastboot devices
it has no devices on the list
Click to expand...
Click to collapse
There are many threads on Win10 and usb driver issues. If you don't want to try to fix fastboot on Windows, you could boot into a Ubuntu Linux LiveCD and install fastboot there.
lost101 said:
There are many threads on Win10 and usb driver issues. If you don't want to try to fix fastboot on Windows, you could boot into a Ubuntu Linux LiveCD and install fastboot there.
Click to expand...
Click to collapse
Yes, I thought about that too =x
SOLVED
Guys the problem was that I've not installed the drivers before, after doing this, I just installed the stock rom from motorola.
Thanks
gconsentini said:
SOLVED
Guys the problem was that I've not installed the drivers before, after doing this, I just installed the stock rom from motorola.
Thanks
Click to expand...
Click to collapse
Hey i'm having the same issue, would you mind telling me how you re-flashed the Motorola rom, Thanks
thomasswan5547 said:
Hey i'm having the same issue, would you mind telling me how you re-flashed the Motorola rom, Thanks
Click to expand...
Click to collapse
Install the Minimal Fastboot & ADB package and the Motorola USB drivers, use the mfastboot package and install the stock ROM as per the instructions provided, but ignore the disassembly part, unless you have your phone does not respond to keypresses.
https://forum.xda-developers.com/showpost.php?p=71328823&postcount=915
Recently I installed a custom ROM that is meant to be installed on a Huawei P8, for my Huawei P8 lite as my new OS because I accidentally deleted my whole OS. When I plug my mobile phone to a power source it shows the Huawei logo, I cannot get it into fastboot/rescue mode. If I try the dload folder to sd-card method it will not do anything. Does anyone know what to do.
Flash the stock firmware. I'm 100% sure your problem would be solved.
munimjaffer said:
Flash the stock firmware. I'm 100% sure your problem would be solved.
Click to expand...
Click to collapse
How do I flash it without fastboot?
pim8181 said:
How do I flash it without fastboot?
Click to expand...
Click to collapse
What do u see when u try to enter fastboot?
munimjaffer said:
What do u see when u try to enter fastboot?
Click to expand...
Click to collapse
When I try to enter fastboot I just see the Huawei logo
pim8181 said:
When I try to enter fastboot I just see the Huawei logo
Click to expand...
Click to collapse
Ok can u enter into recovery mode?
munimjaffer said:
Ok can u enter into recovery mode?
Click to expand...
Click to collapse
Nope....
Your phone got hardbricked with flashing a wrong rom,hardbrick is really hard to unbrick,
i already have one phone that got hardbricked due to flashing a wrong rom,since now i can't find the solution to unbrick it,
hope you find the solution soon..
pim8181 said:
Nope....
Click to expand...
Click to collapse
Is the device recognized by PC? If not, what is device manager labeling the device as?
If it connects to PC and is recognized you can.........
Use adb to clear cache and dalvik/ART cache, then see if the device will boot to recovery or fastboot, if not then power the device off and remove the battery then reinsert the battery(if it has a removable battery). Then leave the device off and connect it to PC then open a adb terminal and type:
adb reboot bootloader (press enter, sometimes the deamon has to start, if nothing happens then type adb reboot bootloader a second time, some devices can be booted from a powered off state with adb)
If that doesn't work try typing:
adb reboot fastboot (press enter).
If none of that works to boot fastboot then try turning the device on, when it gets to the logo, connect the device to PC, open a adb terminal and type:
adb devices (press enter, if it returns a serial number the device is recognized)
Then type:
adb reboot bootloader (press enter and it may boot to fastboot)
Or type:
adb reboot fastboot (press enter)
Or type:
reboot fastboot (press enter)
If none of that gets you to fastboot and you can't boot it manually with the buttons then you're bricked, its not hardbricked though because it boots to logo so that means bootloader is at least there even if it is corrupted and whether anything else is there or works or not.
Whatever you flashed must have had some differences in partitions that flashed over your partitions in places that weren't correct for your device, its more than just the software not being for your device, it is structured completely different than your device.
You've got to get to fastboot someway to flash the stock firmware, that's the only thing I see being able to correct your partitions and put the .imgs in the places they are meant to go.
There is also the possibility that you can download your stock firmware, then extract the kernel(Zimage, its sometimes bundled with/called boot.img or recovery.img, depending on device and android version), the boot.img, the recovery.img and the system.img and then do some research on your device model number and find out which partition(mmcblk0) each of those imgs go in(I could tell you how to use adb to find the partitions but that wouldn't help if flashing the wrong things has screwed up their placements). Then, if adb is working with the device you can use the dd command to manually push the boot.img to its mmcblk0, the recovery.img to its mmcblk0 and the system.img to its mmcblk0.
I would start with dd-ing the recovery, then seeing if it will boot to recovery, if the recovery is a custom recovery and you have a nandroid backup or a correct ROM zip, try restoring or flashing. If it doesn't then dd the boot.img to its mmcblk0 and see if it boots to recovery, if not, dd the system.img to its mmcblk0, you can repeat this process with each of the .imgs in your stock firmware. Maybe if you can push enough to the device it will restore some functionality that will allow you to get booted to a state will allow you to completely reflash the device.
If the confused you then I might have confused myself typing it, lol.
hi, im new in this android arena and this is my first time using smartphone so please forgive my noobness.
i want to root my phone Xiaomi Redmi 5A and i follow some tutorial on youtube where he told to use Minimal ADB & fastboot, TWRP, lazyflasher noverity and lastly Magisk.
im flashing my phone using this command on ADB:
fastboot devices
fastboot flash recovery twrp.img
fastboot reboot
i guess this is it so im rebooting my phone to get into twrp recovery mode by pressing volume up+power but it showed xiaomi stock recovery instead not twrp recovery.
so what i do wrong that i cannot get into twrp recovery menu?
please help me
Don't type fastboot reboot command after flashing, reboot to recovery manually
StillrunsKK said:
Don't type fastboot reboot command after flashing, reboot to recovery manually
Click to expand...
Click to collapse
i type that command after the first try not working (without fastboot reboot command)
it still gave me the same problem even not typing fastboot reboot command
Is the TWRP flash successful?
Ensure that your mobile drivers are installed properly on your pc and that you've enabled USB debugging.
Now after connecting your device to the computer :
1)open adb
2)type adb devices, if it shows a serial number then proceed
3)adb reboot bootloader
4)fastboot flash recovery xxxx.img
After this, remove the USB and reboot to recovery by Holding the appropriate combination of keys.
If you reboot your device first, and then power off and reboot to recovery, you will still get stock recovery.
StillrunsKK said:
Is the TWRP flash successful?
Ensure that your mobile drivers are installed properly on your pc and that you've enabled USB debugging.
Now after connecting your device to the computer :
1)open adb
2)type adb devices, if it shows a serial number then proceed
3)adb reboot bootloader
4)fastboot flash recovery xxxx.img
After this, remove the USB and reboot to recovery by Holding the appropriate combination of keys.
If you reboot your device first, and then power off and reboot to recovery, you will still get stock recovery.
Click to expand...
Click to collapse
Ensure that your mobile drivers are installed properly
Click to expand...
Click to collapse
i dont know where to find this drivers
i've enable the usb debugging
and while flashing it didn't gave any error
im using adb from this thread https://forum.xda-developers.com/showthread.php?t=2317790
where it didn't show any devices when typing adb devices but it showed my devices when typing fastboot devices