Related
How to Flashing LG G3 Stylus
by:
Apriansyah Bintang
Ok Brothers, in this post i want to share how to Flash LG G3 Stylus. This article starts from a few cases where the user's phone report to me, when after they root their phone and update via OTA then their phone stuck on the logo.
Then I was challenged to find a solution: flashing back to factory default.
After a few hours of googling I finally found an easy way flashing this phone, but unfortunately the site was writing in Korean and I forgot to copy the url address.
Caution:
The author will not be responsibility in the event of damage to your phone.
This method is only for LG G3 Stylus Indonesia firmware. If your handphone is not Indonesian firmware than you must search in this index.
If your steps correctly then the flashing process will be completed for 5-6 minutes.
Feel free to ask in the comments field.
Please state the source if you want to copy it on your blog! appreciate my efforts.
Thanks to @quangnhut123 at http://lgviet.com for your tool.
Your thumb please....
Well we immediately began, Prepare the following tools:
Driver this phone for your windows (xp,7,8 or 8.1)
LG Flash Tool
LG Stock Firmware Indonesian.
Consider the following ways:
Install that driver in your windows.
Extract the LG Flashing Tool (LGFlashTool2014.exe etc) and firmware (D69010c_00.kdz) in one folder.
Go into Download Mode/Firmware Update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shut your device down > press volume up and plug the usb cable immediately.
Open the LG Flashing Tool (LGFlashTool2014.exe) in your windows. In the "Select KDZ file" enter the firmware of your LG G3 Stylus Indonesia, and the other settings will automatically be filled. It will look like this:
Select "Normal Flash" if you do not want to lose the data, but in some cases "Normal Flash" does not work. Then press the option "CSE Flash" to return to the "virgin mode" and the same settings when you buy this phone. Then it will look like this.
Select "Start," if the driver is installed on windows than it will look like this.
At number 6 do not change anything except Country transformed into "Different Country" and Language change into "English" and then click "OK." If you have the correct steps it will look like this.
Then if you really had entered the "Download Mode" on your phone then it will begin to complete the task of 1-100%. Similarly, Flashing Tool on your windows it will complete the task of 1-100%. Please see the Flashing process pictures in your windows like the number eight (8) below!
Press "Exit" than the task in your windows will go to the end . Then your phone will restart twice and returned a virgin again exactly as you buy your phone for the first time.
If you want to watching a tutorial in youtube please here..
Thank you for reading my article (Apriansyah Bintang) .
I still hope unlocking the bootloader, to start developing.
Maturnuwun
Terimakasih Infonya sangat membantu....
sama2, jempolnya di tunggu..
Hey nice post. I have a question:
is it posible to install a Lollipop KDZ file in my g3 Stylus? my device is d693n latin american. if the answer is yes, wich KDZ file should I download? if the answer is no, so.. do you have an other alternative to install Lollipop in my device and not wait for OTA? cus OTA will pop up maybe next year u.u ... THANKS!
Polkien said:
is it posible to install a Lollipop KDZ file in my g3 Stylus? my device is d693n latin american. if the answer is yes, wich KDZ file should I download? if the answer is no, so.. do you have an other alternative to install Lollipop in my device and not wait for OTA? cus OTA will pop up maybe next year u.u ... THANKS!
Click to expand...
Click to collapse
Right now it's impossible to Upgrade LG G3 Stylus to Lolipop, because there is no Official LG G3 Stylus Lolipop for us yet, and a developer who has made cm12 (Lolipop in CyanogenMod) not created it for us yet too. So the patient to waiting a developer to create a magic for our gadget that is the best way right now.
Even if i've alternative way to make LG G3 Stylus Upgradable to Lolipop it is still impossible, because a custom recovery CWM and/or TWRP not available yet to make it happen. What a pitty
apriansyahbintang said:
Right now it's impossible to Upgrade LG G3 Stylus to Lolipop, because there is no Official LG G3 Stylus Lolipop for us yet, and a developer who has made cm12 (Lolipop in CyanogenMod) not created it for us yet too. So the patient to waiting a developer to create a magic for our gadget that is the best way right now.
Even if i've alternative way to make LG G3 Stylus Upgradable to Lolipop it is still impossible, because a custom recovery CWM and/or TWRP not available yet to make it happen. What a pitty
Click to expand...
Click to collapse
...because we don`t have unlocked bootloder yet We have tried to crack bootloder (and we have one), but I don`t know how to upload it to phone
Msgz said:
I still hope unlocking the bootloader, to start developing.
Click to expand...
Click to collapse
Yeah me too...
apriansyahbintang said:
Yeah me too...
Click to expand...
Click to collapse
As I can know if the bootloader is locked ?
My phone says , bootloader : unknow , the app Mobileuncle.
Thanks (sorry my english)
Don_Rick said:
As I can know if the bootloader is locked ?
My phone says , bootloader : unknow , the app Mobileuncle.
Thanks (sorry my english)
Click to expand...
Click to collapse
Pardon me bro, i can not understand yet what you mean...
apriansyahbintang said:
Pardon me bro, i can not understand yet what you mean...
Click to expand...
Click to collapse
PHP:
Hi apriansyahbintang
My bootloader is locked or unlocked ? See the screenshot attached, row "bootloader".
Thanks for your help.
Just a quick question i purchased my lg g3 stylus in central america i selected your index and it shows :
TGO/TIGO(CENTRAL AMERICA) V10a LGD693 796.26 MiB
Click to expand...
Click to collapse
, the company i got it from is tigo yes but my phone model shows to be D690 should i still download that firmware or go to the LGD690 one?
btw: any custom roms for our device that you could recommend ?
Don_Rick said:
PHP:
Hi apriansyahbintang
My bootloader is locked or unlocked ? See the screenshot attached, row "bootloader".
Thanks for your help.
Click to expand...
Click to collapse
Many information in cpu-z applications were not correct. Example : battery size it writen 2000 mAh, as you know it's 3000 mAh.
Nope, our device has not bumpered yet...
Maniax2 said:
Just a quick question i purchased my lg g3 stylus in central america i selected your index and it shows : , the company i got it from is tigo yes but my phone model shows to be D690 should i still download that firmware or go to the LGD690 one?
btw: any custom roms for our device that you could recommend ?
Click to expand...
Click to collapse
if you sure that your device is D690 not D693N than flash it. But if your firmware is from Central America (Mexico, etc) may be you should look at this page just to make it sure.
Nope, we haven't custom ROM yet, because we haven't CWM/TWRP yet. :crying:
Lollipop WS update
there is a new firmware update for the stylus a 5.0.1 android
http://t.co/uHf91GHbsc
mckarty said:
there is a new firmware update for the stylus a 5.0.1 android
http://t.co/uHf91GHbsc
Click to expand...
Click to collapse
that was a reason why i post a new thread about lolipop in here :
http://forum.xda-developers.com/android/general/how-to-upgrade-lg-g3-stylus-to-stock-t3102133
I found this page with some firmwares
http://lg-phone-firmware.com/index.php?id_mod=118
can i request system file radio.apk , email apk and file managers apk .
some system file broken.
thx.
Here you can find official rom files for your country.
http://lg-phone-firmware.com/index.php?id_mod=118
que paso por que me salio mal?
apriansyahbintang said:
Pardon me bro, i can not understand yet what you mean...
Click to expand...
Click to collapse
oye disculpa yo lo hice todos eso paso tal cual y solo me regreso a la version kitkat
Hello.
I think my phone is not updated to the latest firmware version shown on Motorola's website i.e 22.34.16.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My mobile's build version is 22.34.11 and when I check for updates it says it is up to date.
Any idea on the issue ?
Sent from my XT1225 using Tapatalk
Right. The latest is "16", not "11". Over in my thread and you @ Jaocagomez thread you can download the latest for your XT1225 phone and install it manually with fastboot.
Moto Maxx - Moto Turbo XT1225 factory images (Mexico | Puerto Rico | India | Brazil)
http://forum.xda-developers.com/moto-maxx/development/moto-maxx-moto-turbo-xt1225-factory-t3078274
[All Quark][Official] Stock Firmware Moto Maxx Droid Turbo Moto Turbo
http://forum.xda-developers.com/moto-maxx/general/quark-stock-firmware-moto-maxx-droid-t3063470
There's several variants for the different countries -- Mexico, Brazil, Chile, Puerto Rico, India... We have them all between the two of us. I even have Chile, even though it's not in my op post but towards the end of the thread.
Also, @baybutcher27 has mirrored them all and you can see the link in a post towards the end of my thread.
http://forum.xda-developers.com/showpost.php?p=63217981&postcount=31
zohaibshafijutt said:
My question is why is there no update via OTA and why can it not be updated via OTA.... I have never updated phone manually.... And thanks for reply..... Moto turbo xt1225.... current version 22.33.11
Click to expand...
Click to collapse
I got an email notification of your message, but I don't see it as PM. Apparently it was a "chat" message which for some reason I don't have Tapatalk access to. Anyway, I copied and pasted it here from my email. I PM'ed you and am aslo posting it here in the thread you started. Hope you get this reply.
1) if you have unlocked the bootloader, rooted and installed TWRP you may not see an OTA update. (If anyone has a different experience or more detailed information, please post.)
2) if your phone was locked to a specific carrier, you may not see an OTA update if you are not with that carrier and your phone is now unlocked.
If you have a "factory" XT1225 and are still on stock -- you should see OTA. Since you have a Moto Turbo XT1225 (India), that phone is not tied to any specific carrier (as far as I know), and is a "factory" XT1225. I own three XT1225 now -- two from Puerto Rico which were sold by Claro carrier and one from Mexico which actually came straight from Motorola factory in China to Mexico, then re-shipped to my U.S. address. The Mexico one was "factory", but the two Puerto Rico were initially locked to Claro. They were unlocked by the seller, but still any OTA updates only went to actual Claro customers (as far as I know). Whereas the Mexico XT1225 got an OTA update notice (while I was on stock and not rooted) -- even though I am in the U.S.
But if you are still on stock Android, have a "factory" XT1225 from any region, and you have not unlocked the bootloader and flashed TWRP custom recovery, then I do not know why you are not seeing an OTA update available.
However, you can download the update from any of the links provided in the forum and manually flash it. Note that you will still be on 5.0.2, just an updated version. Whereas all the custom ROMs we have (CM12.1 and Resurrection Remix, as well as Mokee) are all 5.1.1 Lollipop.
Even though I am on CM12.1, I was on "11" Moto Turbo radio for a long time. I recently flashed "16" Puerto Rico to two of my XT1225. The 3rd is still unrooted and on stock for now. It's a backup.
My phone has markings on front...
On top left corner M inside circle and on top right of phone 0415-02158 and on right bezel it says "Motorola confidential Property"
I think you can tell me now which model i am using from provided information...
Sent from my XT1225 using Tapatalk
zohaibshafijutt said:
My phone has markings on front...
On top left corner M inside circle and on top right of phone 0415-02158 and on right bezel it says "Motorola confidential Property"
I think you can tell me now which model i am using from provided information...
Sent from my XT1225 using Tapatalk
Click to expand...
Click to collapse
Interesting. Looks like you have an engineering sample or a phone submitted for government testing?
The Moto Turbo XT1225 launched in India with 5.0.2, software version "11". Soon after, the other XT1225 models (Moto Maxx) in Latin America countries started receiving 5.0.2, upgrading from 4.4.4. Factory versions were first, with carrier versions following. Brazil and Mexico factory versions got "13" and later "16". India finally got "16", after having "11" for a long, long time.
Don't know why you didn't get "16" via OTA, but you can download and flash it manually. However, I found Lollipop 5.02. to be laggy. 5.1.1 is much smoother, so that's why I'm running custom ROM.
Ok my device is engineering as it says in picture.
Is it good thing or bad ?
Custom Roms are satble than stock ?
5.1.1 which you are using is stable than 5.0.2 stock ?
I have never updated phone manually as I do not know how to flash.
This is my only phone so I am concerned about flashing...
I'm not sure I'd argue it's smoother than stock. Just a lot more control. With that control and a few kernel tweaks it may very well be though.
Has anyone ever verified the engineering phone is bootloader unlocked?
mrkhigh said:
I'm not sure I'd argue it's smoother than stock. Just a lot more control. With that control and a few kernel tweaks it may very well be though.
Click to expand...
Click to collapse
On stock 5.0.2 "11", I had lots of lag. Initial stock 5.0.2 was horrible, compared to the smoothness of stock 4.4.4. Maybe 5.0.2 "16" is better, I don't know. I went to custom ROM 5.1.1 long before then and never went back.
mrkhigh said:
Has anyone ever verified the engineering phone is bootloader unlocked?
Click to expand...
Click to collapse
I don't think it's already unlocked, but of course it's easily unlock-able. Just need to go to the Motorola website and they'll give you the code.
If it is already unlocked, then yeah that's one less step to flashing TWRP and rooting.
I'd never expect a stolen Motorola engineering phone to behave like a normal phone.
Engineering development prototype
Steve-x said:
I'd never expect a stolen Motorola engineering phone to behave like a normal phone.
Click to expand...
Click to collapse
You're right that phone may not act like normal. If I'm looking at the screenshot right, it only has 32GB internal storage -- instead of the retail 64GB? All the retail XT1225 (Moto Turbo XT1225/Moto Maxx XT1225 ) sold to consumers have 64GB internal storage... so even though it says "Moto Turbo" in your settings, your phone is definitely a development prototype never meant to be released to the public.
The product/variant also doesn't match an XT1225. This is probably why auto updates don't occur. Manually flashing likely works fine though and is the proper solution to updates.
Sorry for posting in this thread. I have XT1254. Cannot understand what does "Device is ENGINEERING" mean for me. Do I need to pay for sunshine unlocking?
UPD: It is unlocked. Successfully flashed TWRP and SuperSU. Didn't expect to get such a phone.)
andray said:
Sorry for posting in this thread. I have XT1254. Cannot understand what does "Device is ENGINEERING" mean for me. Do I need to pay for sunshine unlocking?
UPD: It is unlocked. Successfully flashed TWRP and SuperSU. Didn't expect to get such a phone.)
Click to expand...
Click to collapse
Device is Engineering usually means it's a prototype device not meant to be sold to the public. There are exceptions and I'll get to that...
There were also some Moto Nexus 6 like this, which is 95% identical to the Moto Quark series and released about the same time:
MOTO NEXUS 6
[Q] Cant Unlock Bootlader - DEVICE IS ENGINEERING
r3pwn said:
Hey, checking in here. It appears that you have a prototype Nexus 6, @vinay3698. I have a few Motorola prototype devices and would be more than willing to help you out with any issues you may have. I sent you a PM
Click to expand...
Click to collapse
r3pwn said:
By no means ever take it to a service center. Not sure how they'd handle getting a prototype device.
Click to expand...
Click to collapse
vinay3698 said:
got it.. there is no need to unlock bootloader for this device -- just recovery and supersu is enough..
and btw i flashed pure nexus rom and its supermooth..
thanks man for ur suggestion.
Click to expand...
Click to collapse
Also from a Moto G 2015 thread:
[Q] What does 'Device is ENGINEERING' mean?
fastercon said:
i also have a phone that says engineering in fastboot mode and was wondering what it meant. its a xt1550 asia model.
my phone has a lot of extra apps however -- bug2go, battery tracer, desense teste,r cdbench, iplog tool -- just to name a few.
should i leave the phone as is or is it possible to flash a US retail.? any comments are welcome
Click to expand...
Click to collapse
That one just above is obviously a test phone from Motorola Engineering dept not meant for retail sale.
The exceptions are the Motorola phones are made in China, and on the black market in China you could get some Droid Turbo XT1254 phones with bootloaders "unlocked from the factory". A few months after the XT1254 was released here in the U.S., one guy went to China on a business trip from the U.S. and bought one. He bought an bootloader unlocked premium Verizon XT1254 on the street. How would such a phone be available for sale? Well, nothing legal... Either the phone was stolen from the factory production line before bootloader was locked down, to be shipped to Verizon in the U.S. or it was stolen from the department that tests software and they don't want their bootloaders locked down. Or some hybrid of the two -- a production line device stolen and the thief has proprietary Motorola development software that can unlock the bootloader. In those cases, it would not be a prototype device but an actual retail device. Again, I'm talking about the XT1254 phone sold in China on the black market, not your phone.
You did nothing wrong. You are just lucky.
In the other case discussed in this thread, it was obviously a prototype not meant for sale as it was an XT1225 with only 32GB internal memory. All retail XT1225 have 64GB internal memory, with ballistic nylon (which is really ballistic nylon + kevlar underneath). The XT1225 was the most premium of the Quarks (XT1225/XT1250/XT1225), as they also had more HSPA and LTE bands (but no CDMA, which most people outside the U.S. don't need anyway) and had bootloader unlockable from Motorola website (since they were not Verizon phones). But his phone was a 32GB XT1225 -- which doesn't exist, except perhaps inside Motorola test labs. So, no way to predict if Quark custom ROMs would work correctly on it, as they are developed for retail phones..
But yours is a 64GB XT1254 also with ballistic nylon and your bootloader is already unlocked. So, congratulations.
ChazzMatt, it's interesting that it has Verizon logo and still is "engineering".
P. S. SunShine app told that it can unlock bootloader for $25 Hopefully i checked fastboot before that
andray said:
ChazzMatt, it's interesting that it has Verizon logo and still is "engineering".
P. S. SunShine app told that it can unlock bootloader for $25 Hopefully i checked fastboot before that
Click to expand...
Click to collapse
Your update said bootloader was already unlocked, right?
ChazzMatt said:
Your update said bootloader was already unlocked, right?
Click to expand...
Click to collapse
i was told on another forum that it's not 'unlocked' because it was never locked don't know what will happen if i flash official stock rom updates? Can they lock bootloader or it's impossible on this device?
I think you would have to manually lock the bootloader. But please don't do that, even just to test.
andray said:
Sorry for posting in this thread. I have XT1254. Cannot understand what does "Device is ENGINEERING" mean for me. Do I need to pay for sunshine unlocking?
UPD: It is unlocked. Successfully flashed TWRP and SuperSU. Didn't expect to get such a phone.)
Click to expand...
Click to collapse
Hi, this has a solution? I feel the same, I can not unlock bootloader.
Sorry for mi english
ZauRocf said:
Hi, this has a solution? I feel the same, I can not unlock bootloader.
Sorry for mi english
Click to expand...
Click to collapse
Use Sunshine ($25) to unlock XT1254 bootloader.
XT1225, XT1250 have free bootloader unlock code from Motorola, but XT1254 requires a paid exploit.
ChazzMatt said:
Use Sunshine ($25) to unlock XT1254 bootloader.
XT1225, XT1250 have free bootloader unlock code from Motorola, but XT1254 requires a paid exploit.
Click to expand...
Click to collapse
Oh no! ZauRocf, it may be too late. If it says "Device is ENGINEERING" then it is fully unlocked. Do not pay $25.
Hi guys!
I searched and somone has opened a thread about this but never got an answer:
I have an unlocked droid turbo and was wondering if i can flash stock moto maxx firmware onto it?
(I think it was the 1250 that was identical? Correct me if im wrong..)
If so, am i likely to run into any problems?
How am i to go about doing it?
I am on a non-Verizon gsm network so no problem there.
Thanks!
You cannot flash the maxx firmware onto the turbo. The xt1250 maxx is the same as the turbo, xt1254, but the maxx xt1225 firmware isn't compatible and a lot of things will not work right if you can get it to boot.
the XT1250 does not have marshmallow yet, Nor does the Turbo. Only the XT1225 has Marshmallow, and thats the brazil firmware
It wasn't for marshmallow, but for the stock experience and performance.
Thanks for the quick reply!
Xeroman0 said:
It wasn't for marshmallow, but for the stock experience and performance.
Thanks for the quick reply!
Click to expand...
Click to collapse
If you want Stock, I recommend Computerfreaks Rom, its based on the latest stock firmware, and debloated with performance tweaks
Thanks!
Droid Turbo, not Moto Turbo
@Xeroman0, please change your title to DROID TURBO. -- not just "Turbo". Motorola used the Turbo name for more than one Quark.
There's also a Moto Turbo and YES you can flash Moto Maxx and Moto Turbo over each other.
In the body of your question you finally say Droid Turbo, but the title is misleading. I have actually flashed Moto Maxx and Moto Turbo firmware back and forth over my XT1225.
Xeroman0 said:
Hi guys!
I searched and somone has opened a thread about this but never got an answer:
I have an unlocked droid turbo and was wondering if i can flash stock moto maxx firmware onto it?
(I think it was the 1250 that was identical? Correct me if im wrong..)
If so, am i likely to run into any problems?
How am i to go about doing it?
I am on a non-Verizon gsm network so no problem there.
Thanks!
Click to expand...
Click to collapse
Nitefire77 said:
You cannot flash the maxx firmware onto the turbo.
Click to expand...
Click to collapse
1) You can if it's the Moto Maxx XT1225 to Moto Turbo XT1225.
You can get away with just saying "Turbo" in the Droid Turbo forum but not over here, please.
I realize in the remainder of your answer, which I edited off you did go on to explain. Just saying, it helps if we are clear from the beginning.
____
2) Also YES, you can flash XT1250 U.S. Moto Maxx firmware over the Droid Turbo XT1254. They are the same device.
People have flashed the XT1254 firmware over the bootloader unlocked XT1250 and it worked fine (back before you could unlock the XT1254 bootloader). So, it should work the other way too.
But all the XT1250 has for stock image is 5.0.2. If you try it, make sure your bootloader is unlocked. And make sure you are actually flashing the XT1250 U.S. Moto Maxx firmware and not the XT1225 Moto Maxx/Moto Turbo firmware.
Still the least riskiest for an XT1254 Droid Turbo is your suggestion for @Computerfreak274's Rom -- if you want pure Motorola stock experience that's debloated.
http://forum.xda-developers.com/droid-turbo/development/computerfreekunlocked1-0-t3255945
ChazzMatt said:
@Xeroman0, please change your title to DROID TURBO. -- not just "Turbo". Motorola used the Turbo name for more than one Quark.
There's also a Moto Turbo and YES you can flash Moto Maxx and Moto Turbo over each other.
In the body of your question you finally say Droid Turbo, but the title is misleading. I have actually flashed Moto Maxx and Moto Turbo firmware back and forth over my XT1225.
1) You can if it's the Moto Maxx XT1225 to Moto Turbo XT1225.
You can get away with just saying "Turbo" in the Droid Turbo forum but not over here, please.
I realize in the remainder of your answer, which I edited off you did go on to explain. Just saying, it helps if we are clear from the beginning.
____
2) Also YES, you can flash XT1250 U.S. Moto Maxx firmware over the Droid Turbo XT1254. They are the same device.
People have flashed the XT1254 firmware over the bootloader unlocked XT1250 and it worked fine (back before you could unlock the XT1254 bootloader). So, it should work the other way too.
But all the XT1250 has for stock image is 5.0.2. If you try it, make sure your bootloader is unlocked. And make sure you are actually flashing the XT1250 U.S. Moto Maxx firmware and not the XT1225 Moto Maxx/Moto Turbo firmware.
Still the least riskiest for an XT1254 Droid Turbo is your suggestion for @Computerfreak274's Rom -- if you want pure Motorola stock experience that's debloated.
http://forum.xda-developers.com/droid-turbo/development/computerfreekunlocked1-0-t3255945
Click to expand...
Click to collapse
Aww all it has is 5.0.2? Wow thats unfortunate. And strange that motorola would do that.
I looked over at the computerfreak forum, there are no pictures, but it seems like he just took the bloat software out of stock xt1254 firmware. That means that all the annoying mesages when turning off data or turning on gps will still be there( and those ugly signal bars yechh). I just dont want to go through the flashing process for nothing.
Currently on and loving the look of CM12.1.
Also, how do i change the title? I couldnt find a button
Xeroman0 said:
Aww all it has is 5.0.2? Wow thats unfortunate. And strange that motorola would do that.
Click to expand...
Click to collapse
Motorola gave 5.0.2 to the XT1225 "international" Moto Maxx/Moto Turbo in April 2015.
Motorola then gave 5.1 to the XT1254 in July 2015.
Motorola finally gave 5.0.2 to the XT1250 U.S. Moto Maxx in February/March 2016 .
Yes, a lesser version than they gave the XT1254, and almost a full year after the XT1225 got Lollipop 5.02. Very strange since the XT1250 and XT1254 are the same device. Any criticism Lenovo/Motorola has gotten over upgrades is fully deserved.
Of course anyone with an XT1250 could have flashed Lollipop via any of the custom ROMs we have. And by February 2016, even CM13 (Marshmallow) was available.
The only Quark owners dependent on Motorola are the XT1254 Verizon subscribers who insist on stock firmware due to VoLTE. Many XT1254 owners in this forum actually do not use Verizon (and the XT1225 would actually be better for them as most are on GSM-based carriers) and even many XT1254 Verizon subscribers think the custom ROMs offer more benefits that outweigh the current lack of VoLTE.
Xeroman0 said:
I looked over at the computerfreak forum, there are no pictures, but it seems like he just took the bloat software out of stock xt1254 firmware. That means that all the annoying mesages when turning off data or turning on gps will still be there( and those ugly signal bars yechh). I just dont want to go through the flashing process for nothing.
Currently on and loving the look of CM12.1.
Click to expand...
Click to collapse
I don't know anything about annoying messages as I have never used CF's ROMs (I have three XT1225), but for signal bars you can probably install xposed/gravity box and change the look of the signal bars.
Xeroman0 said:
Also, how do i change the title? I couldnt find a button
Click to expand...
Click to collapse
On a PC, when you hit edit, there's a button just below the box that says "advanced". If you hit advanced, then it shows all the fields including the title field. Can't remember if it also shows up in the XDA app on a mobile device, but it does on a PC when editing in a browser.
ChazzMatt said:
Motorola gave 5.0.2 to the XT1225 "international" Moto Maxx/Moto Turbo in April 2015.
Motorola then gave 5.1 to the XT1254 in July 2015.
Motorola finally gave 5.0.2 to the XT1250 U.S. Moto Maxx in February/March 2016 .
Yes, a lesser version than they gave the XT1254, and almost a full year after the XT1225 got Lollipop 5.02. Very strange since the XT1250 and XT1254 are the same device. Any criticism Lenovo/Motorola has gotten over upgrades is fully deserved.
Of course anyone with an XT1250 could have flashed Lollipop via any of the custom ROMs we have. And by February, even CM13 (Marshmallow) was available.
The only Quark owners dependent on Motorola are the XT1254 Verizon subscribers who insist on stock firmware due to VoLTE. Many XT1254 owners in this forum actually do not use Verizon (and the XT1225 would actually be better for them as most are on GSM-based carriers) and even many XT1254 Verizon subscribers think the custom ROMs offer more benefits that outweigh the current lack of VoLTE.
I don't know anything about annoying messages as I have never used CF's ROMs (I have three XT1225), but for signal bars you can probably install xposed/gravity box and change the look of the signal bars.
On a PC, when you hit edit, there's a button just below the box that says "advanced". If you hit advanced, then it shows all the fields including the title field. Can't remember if it also shows up in the XDA app on a mobile device, but it does on a PC when editing in a browser.
Click to expand...
Click to collapse
thanks for your in-depth reply. ill try to flash CF's rom today, though ill flash the 1.2.6 version as people seem to be having trouble with the later ones
UPDATE: it seems that not only was my assumption about the CF rom right, but worse than i thought as the annoying messages now crash the ui as well.
so... how is 5.0.2 working on the 1250?
or- is there another way to get the REAL moto display working on CM?
Xeroman0 said:
thanks for your in-depth reply. ill try to flash CF's rom today, though ill flash the 1.2.6 version as people seem to be having trouble with the later ones
UPDATE: it seems that not only was my assumption about the CF rom right, but worse than i thought as the annoying messages now crash the ui as well.
so... how is 5.0.2 working on the 1250?
or- is there another way to get the REAL moto display working on CM?
Click to expand...
Click to collapse
why don't you flash oficial CM 13 over your XT1250
siberian85 said:
why don't you flash oficial CM 13 over your XT1250
Click to expand...
Click to collapse
Its not mm that i want. I want stock, but not the abomination the verizon made
Xeroman0 said:
Its not mm that i want. I want stock, but not the abomination the verizon made
Click to expand...
Click to collapse
XT1250 U.S. Moto Maxx 5.0.2 factory image
http://www.filefactory.com/folder/f9d1880e6c5b4800/?sort=created&order=DESC&show=50
Here's the only link I could find, but it's a slow download. You want the XT1250 5.0.2. Right now it's the top one on the list.
ChazzMatt said:
XT1250 U.S. Moto Maxx 5.0.2 factory image
http://www.filefactory.com/folder/f9d1880e6c5b4800/?sort=created&order=DESC&show=50
Here's the only link I could find, but it's a slow download. You want the XT1250 5.0.2. Right now it's the top one on the list.
Click to expand...
Click to collapse
Thanks. Is there a way to go about flashing it while keeping twrp?
Also since its stock i have to avoid something else since its a downgrade or something?
Can i even flash this using twrp?
I was thinking of flashing it then twrp. Would that work?
Or do i have to use adb etc?
Xeroman0 said:
Thanks. Is there a way to go about flashing it while keeping twrp?
Also since its stock i have to avoid something else since its a downgrade or something?
Can i even flash this using twrp?
I was thinking of flashing it then twrp. Would that work?
Or do i have to use adb etc?
Click to expand...
Click to collapse
Hi sorry for bumping, I'm just really afraid of bricking my phone because of the potential bootloader change
Xeroman0 said:
Hi sorry for bumping, I'm just really afraid of bricking my phone because of the potential bootloader change
Click to expand...
Click to collapse
You won't be able to flash the XT1250 factory image via TWRP. You already have Lollipop bootloader, but first try flashing without gpt.bin (keeping your Droid Turbo bootloader). If that works, then leave it alone.
I know people have flashed XT1254 Droid Turbo 5.1 stock over XT1250 back when they still only had 4.4.4 KitKat, and it worked.
Theoretically, this should work also, but you are technically downgrading from 5.1 to 5.0.2.
Now whether you can use the XT1250 radio or whether you have to re-flash the XT1254 radio afterwards, I don't know.
It's your decision, your phone.
Have a stock Droid Turbo 5.1 image to flash back in case something goes wrong and you need to go back.
Thanks! If i need mfastboot then ill try it when i have the time. Cheers!
@ChazzMatt
Ok so before i pull the trigger, i was hoping to confirm a few things to minimize the risk of brick:
1) i need to use mfastboot as opposed to plain fastboot
2) it DOES matter if i have the 32gb or 64gb droid turbo, and since i have 32gb it will *probably* be compatible
3) i should flash everything except radios, gpt and recovery if i want to make sure that everything will work and keep twrp
4) i currently have su4tl-49, unlocked and thats totally ok?
5) in the event the flash fails, i can just restore to the stock su4tl-49 version thats on here (the one without recovery)
6) i can follow this guide http://forum.xda-developers.com/droid-turbo/help/tutorial-how-to-flash-official-firmware-t3074724 (again, avoiding radio and recovery)
Thanks for all your help!
Xeroman0 said:
@ChazzMatt
Ok so before i pull the trigger, i was hoping to confirm a few things to minimize the risk of brick:
1) i need to use mfastboot as opposed to plain fastboot
2) it DOES matter if i have the 32gb or 64gb droid turbo, and since i have 32gb it will *probably* be compatible
3) i should flash everything except radios, gpt and recovery if i want to make sure that everything will work and keep twrp
4) i currently have su4tl-49, unlocked and thats totally ok?
5) in the event the flash fails, i can just restore to the stock su4tl-49 version thats on here (the one without recovery)
6) i can follow this guide http://forum.xda-developers.com/droid-turbo/help/tutorial-how-to-flash-official-firmware-t3074724 (again, avoiding radio and recovery)
Thanks for all your help!
Click to expand...
Click to collapse
As far as I can see, yes.
Just make sure you flash ALL the "sparsechunks". I don't know how many the XT1250 image has, but the first time (when I flashed from Puerto Rico Moto Maxx XT1225 4.4.4 to Moto Turbo XT1225 5.0.2 stock image), I was going by the example in the guide which lists 8 "sparsechunks" -- but that's just an example. The image you are flashing may have more... Having never done it before, I thought "well, I just need to flash 8 of them"! Luckily, I had an unlocked bootloader so I was able to recover from my mistake.
Endless bootloop at start-up.
Booted backinto recovery and reflashed all the sparse chunks the next time.
ChazzMatt said:
As far as I can see, yes.
Just make sure you flash ALL the "sparsechunks". I don't know how many the XT1250 image has, but the first time (when I flashed from Puerto Rico Moto Maxx XT1225 4.4.4 to Moto Turbo XT1225 5.0.2 stock image), I was going by the example in the guide which lists 8 "sparsechunks" -- but that's just an example. The image you are flashing may have more... Having never done it before, I thought well I just need to flash 8 of them! Luckily, I had an unlocked bootloader so I was able to recover from my mistake.
Click to expand...
Click to collapse
How can i tell how many there are?
Xeroman0 said:
How can i tell how many there are?
Click to expand...
Click to collapse
Yes, when you download the image. For instance the 5.0.2 Puerto Rico has only 7 sparsechunks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the only copy I keep on my computer. But India 5.0.2 has more, like 9 or 10, which is why I messed up the first time only flashing 8.
Remember, I was going from Puerto Rico 4.4.4 to India 5.0.2. I didn't know how many sparsechunks Puerto Rico 4.4.4 had because it was already installed. And I didn't know I need to flash ALL of India because I had never done it before, and was going by the example in the guide. In retrospect, very silly of me to assume that, but there are so many weird things in flashing phones (for instance, LG G2 flashing has so many different rules from the LG Nexus 5, even though they have basically the same hardware) that only flashing 8 sparsechunks could have been the right thing to to. It wasn't -- but I only found out by making the mistake first.
If I didn't say it before, save off a TWRP backup image on your computer first.
This thread has been created
for
Questions & Answers/Troubleshooting
Specific to
Moto G7 Power
2019
Please feel free to share issues, questions and offer help. Noob questions are welcomed.
It is always best to use the Thanks button, in lieu of simply posting "Thank you".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please keep discussion focused, on questions pertaining to this Device
List of supporters............
To those seeking help: Please don't bombard the supporters with PMs asking for help. Instead, ask your question here in the thread so others can benefit from the solution to your problem as well. If you want to be sure someone particular gets notified of your question, put his / her username directly after an @.If you have ROM-related questions, post in the relevant ROM Q&A thread (if there is one) or directly in the ROM development thread. Thank you!Supporters: If you want to be put on or off the list, just make a request here in the thread!Before posting anything, I strongly advise you to read
Forum Rules
[GUIDE] - XDA New User Guide - Getting started on XDA
XDA Tour
[Index]Motorola Flashing Utilities, Firmware, and more
Index for Device Thread Link
Please look for a similar thread when visiting another device forum.
If you would like to create a [Help Thread] please Click Here.
I'm not planning on adding every Rom or Mod,
but if you have a suggestion for other links
Please post them here.
FAQs
UnLocking the Bootloader
ReLocking the Bootloader
flash full stock firmware then
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot oem lock
fastboot oem lock
fastboot oem lock
fastboot flash boot boot.img
fastboot oem lock
https://forum.xda-developers.com/g7-power/help/fastboot-oem-lock-tells-to-enable-allow-t4033197
[Fixing] Baseband <not found> / IMEI=0 / No Network After Flash / Issues
Fixing your Moto stuck in Qualcomm QHSUSB_Bulk or qloader mode
[Guide] Recovering from a hard brick by sluggedlemon
blankflash_ocean_PDOS29.114-134-2.zip https://mega.nz/#!PHRD1KhI!epk2yLEqnQBKEwT2QbQaOe8-4675pfj76Hs7pC5kbQE
Using Lenovo's MOTO Smart Assistant to Update/Repair/Backup
Bypass Tethering Cap Moto G7 Power XT1955-5 Metro PCS Variant by Articul8Madness
[GUIDE] Moto G7 Power/Supra [All Versions] Enable ALL LTE Bands (maybe?) by diversenerd
Custom Roms/Recovery/Root/
Moto G7 Power/Supra [All Versions] [Pie] Magisk Root Guide [OTA/SafetyNet Working] by diversenerd
The Complete Noob Guide to Rooting MetroPCS XT1955-5 Qualcomm Variant by Articul8Madness
[PORT] Unofficial TWRP for G7 Power by Geofferey
[ROM][UNOFFICIAL]Lineage OS 16.0 by SyberHexen
remove "bad key" at start of boot by __iggy
Firmware
https://mirrors.lolinet.com/firmware/moto/ocean/official/
[Index]Motorola Flashing Utilities, Firmware, and more
[GUIDE] Moto G7 Power/Supra [All Versions] Flash Back to Stock Firmware by diversenerd
Manually Update US Retail Moto G7 Power to May 1st Security Update. by nucher
News, specs
https://www.xda-developers.com/moto-g7-moto-g7-play-moto-g7-plus-moto-g7-power-forums/
.
Do we have a release date yet or are we just speculating?
Doofitator said:
Do we have a release date yet or are we just speculating?
Click to expand...
Click to collapse
https://www.indiatoday.in/technolog...hing-else-you-need-to-know-1456716-2019-02-15
Sent from my Atom using XDA Labs
sd_shadow said:
https://www.indiatoday.in/technolog...hing-else-you-need-to-know-1456716-2019-02-15
Click to expand...
Click to collapse
I was really surprised by that - except I'm not in India. I'm in Australia - there's still not even a mention of the g7 on the Australian site. Do we have a release date for the rest of the world?
Doofitator said:
I was really surprised by that - except I'm not in India. I'm in Australia - there's still not even a mention of the g7 on the Australian site. Do we have a release date for the rest of the world?
Click to expand...
Click to collapse
"An Australia release date has yet to be confirmed and Motorola has yet to say if the phone will land in the country. If it ever does, we can expect the price to start at around AU$430 if a conversion of the US price of the handset rings true."
https://www.techradar.com/reviews/moto-g7-review
This moto will be available in europe at the end of this month, thats when im gonna buy it.
Can i expect a TWRP port and tested magisk compatibility by then, or at least shortly after ?
Im assuming bootloader unlock will work just like with other motos so that wont be an issue, and magisk is probably gonna be compatible, though i havent used magisk on android pie yet
Without those things its not even worth to buy a smartphone these days, and i dont wanna buy a lower g6 just because development there is already established
I bought the phone a couple of days ago. Had a hard time draining the battery. Ask me anything!
Just got my xt1955-2 in the US. So far I'm liking it. I was surprised it has CDMA, wasn't expecting the dual SIM to have it. No luck getting Sprint to activate though. Hotspot isn't working with a At&t Connected Car data Sim. It checks for account authorization, fails and tells me to call 611. Connected Car is a hotspot plan. Guess I'll be waiting for a root thread. Sadly no Dolby Atmos. The phone is too big! Thickness is almost the same as the G6 Play. I bought it for the battery so I'll guess I'll learn to like the size.
It is a nicer performing device than my my G6 Play. It's my first day, can't comment on battery life.
Do you have NFC ?
I have the German Version and No NFC.
Some hopefully helpful information for all y'all:
Kernel Source Code: https://www.xda-developers.com/motorola-moto-g7-power-kernel-source-code/
To get links to OTA for your phone, go here:
https://forum.xda-developers.com/moto-z/development/tool-motorola-ota-link-generator-tool-t3537039
(Note that I can't find an OTA for what's currently likely the most common Moto G7 Power in Europe, namely, this one: https://motoota.lolinet.com/?model=...4.ocean_reteu.retail.en.US&carrier=reteu2&sn=. If anyone can figure out where to get this or the full stock image for RETEU2, please post it below.)
Some full images available here, but careful, not all images are available there yet:
https://mirrors.lolinet.com/firmware/moto/ocean/
(See also here: https://mirrors.lolinet.com/firmware/moto/readme-en.html)
OEM Unlock Code (VOIDS WARRANTY, WIPES DATA) to unlock the bootloader can be obtained, as usual for Motorola phones, via here:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b
But note that Motorola doesn't ship a Fastboot Driver driver for this device yet. As usual however, one can use the Google USB driver that ships with the Android SDK, by using the good old "Have Disk" method.
have any bluetooth codec? such as aptx, aptxhd or LDAC.
so the moto g7 power doesnt support 5Ghz wifi correct ?
Jokert129 said:
so the moto g7 power doesnt support 5Ghz wifi correct ?
Click to expand...
Click to collapse
802.11 a, b, g, n, dual-band
https://www.phonearena.com/phones/Motorola-Moto-G7-Power_id11063
https://lifehacker.com/the-features-that-matter-on-your-next-router-and-the-o-1646574925
Sent from my PH-1 using Tapatalk
Jokert129 said:
so the moto g7 power doesnt support 5Ghz wifi correct ?
Click to expand...
Click to collapse
I had it and it does Not Support WLAN 5ghz.
Very Bad.
palorent said:
I had it and it does Not Support WLAN 5ghz.
Very Bad.
Click to expand...
Click to collapse
Wlan and wifi are the same thing.
Are you referring to wifi tether/hotspot?
Sent from my PH-1 using XDA Labs
sd_shadow said:
802.11 a, b, g, n, dual-band
https://www.phonearena.com/phones/Motorola-Moto-G7-Power_id11063
https://lifehacker.com/the-features-that-matter-on-your-next-router-and-the-o-1646574925
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
The thing i dont understand is that some websites write that it does support 5Ghz, other websites say that it doesnt.
I can connect to 5Ghz wifi with my old OneplusOne, but my moto g7 power doesnt even see the network, which is why i asked here. Its kinda odd that a 2019 device wouldnt be able to support 5Ghz.
I have my 5Ghz on 11 a/n/ac mixed mode, tried to change it to a/n mixed only and it still doesnt see it.
It supports 2.4 and 5GHz according to Motorola
https://www.motorola.com/us/products/moto-g-power-gen-7#specs
mingkee said:
It supports 2.4 and 5GHz according to Motorola
https://www.motorola.com/us/products/moto-g-power-gen-7#specs
Click to expand...
Click to collapse
i think i read something about wifi regional codes and how european version of moto g7 power doesnt support 5Ghz, so one needs to change wifi regional code, and that requires root
at least my moto g7 power doesnt see the 5Ghz wifi, even though my oneplue one does
I'm thinking about switching to this device, coming from a Moto G 2015 (Osprey) which still works ok but has a totally ruined battery life.
So yes, the 5000MaH is one of the features that makes me want this phone.
BUT another one is audio recording. I often do videos at concerts, dj sets, etc. I'm not an audiophile and I'm not looking for anything professional, but with my older phones (HTC Desire and Samsung Galaxy S III) the recorded audio was listenable. With Osprey it was just terrible: when recording from a loud source it got "saturated" and returned just unlistenable noise.
I read similar problems for later Moto phones, but my question is: has this been improved in Moto G7 Power?
Cannot find any review with info about this.
Thanks!
Hello all,
Total newbie here, and I purchased two phones with the Chinese Rom, hoping to flash to the global version when it came out (which is released today).
I have the RMX3560 (8 GB Ram, 128 Gig, 80 watt charging) with the build number RMX3560_11_A.31
So I have a couple of novice questions
About how long after the release date will I have to wait for the Global RAM version?
From what I have seen the Indian version is RMX3561 and there is also RMX3563 What is the difference? Can I only use RMX3560? or will other variations work?
Thank you in advance, I look forward to growing in knowledge
i am RMX3560 user too, not sure this phone can flash to RMX3561 firmware or not .......
I purchase RMX3562 Chinese version at April. The RMX3561 global version just luanch at Jun. Normally, wait 2month around could find the ROM.
Do you know where I can get the RMX 3562 stock rom, I need to flash the Chinese version to unlock the bootloader. the European version RMX3563 does not currently support DeepTesting.
nprotecc said:
Do you know where I can get the RMX 3562 stock rom, I need to flash the Chinese version to unlock the bootloader. the European version RMX3563 does not currently support DeepTesting.
Click to expand...
Click to collapse
Do you even understand that u need to unlock bootloader BEFORE u can flash other roms? and what is the point of unlock it if u already have the global version? no one want to make rom or custom recovery for mtk chip, ppl unlock to flash global rom since they bought the chinese variant, fyi they (realme) dont sell globally all of their phones some sells only in selected countries and regions
Hollow192 said:
Do you even understand that u need to unlock bootloader BEFORE u can flash other roms? and what is the point of unlock it if u already have the global version? no one want to make rom or custom recovery for mtk chip, ppl unlock to flash global rom since they bought the chinese variant, fyi they (realme) dont sell globally all of their phones some sells only in selected countries and regions
Click to expand...
Click to collapse
I need to unlock the bootloader to be able to root magisk... I can't find any way to do it on this gt neo 3 150w device... I think I just have to wait for an update of the deeptesting apk
There have a no free way can have the rom. Google search gsmmafia. There have RMX3561,80W charging and RMX3563,150W chargeing. I think 3560 China = 3561 Global, 3562 China = 3563 Global.
China version GT Neo 3 ROM collection as below link.
GitHub - chuest/ota_update
Contribute to chuest/ota_update development by creating an account on GitHub.
github.com
antonic said:
China version GT Neo 3 ROM collection as below link.
GitHub - chuest/ota_update
Contribute to chuest/ota_update development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
Do you know how I can flash the rom RMX3562_11.A.34? I don't have bootloader unlock. and I don't have the scatter file of Dimensity 8100
To be careful, you should backup your data before unlock. Your phone will fully erase after unlock. Unlock the phone is the minimum requirement for flash "ROM" or "ROOT".
I found RMX3561export_11_A.06_2022050613370200.7z that might be load scatter by SP Flash tool v6 (IMAGESS/download_agent/flash.xml)
But seems still no available bypass auth ... Any one can help?
the export for our processor has not been developed yet. On github, you can follow the corresponding branch. We have to wait a little, everything will be fine)).
I am asking, just to be clear on this... As I bought Realme GT Neo3 12+256 RMX3560 from China, with China ROM, will I be able eventually to install Global or EU ROM? With China ROM, Android auto, notifications on always on screen are not working!
biceman said:
I am asking, just to be clear on this... As I bought Realme GT Neo3 12+256 RMX3560 from China, with China ROM, will I be able eventually to install Global or EU ROM? With China ROM, Android auto, notifications on always on screen are not working!
Click to expand...
Click to collapse
Many people are interested in this question. I have the same model. To change the region, you need to bypass authorization, and now it is not yet possible to do this. The exploit has not been developed yet. The forum describes the experience of OnePlus Ace firmware on OxygenOS. In any case, it's better not to experiment yet.
I also buy china version rmx3560 12+256 and flash to India version(maybe global).
Maybe i can post a tutorial later.
Give some tips.
1. Unlock bootloader
2.get the india version full update payload.bin
3.dump the image
4.use flashboot to flash 38 image
5.erase all user data
6.reboot
7.enjoy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is a firmware update available?
Give a link to the Indian firmware , please
tamama9527 said:
I also buy china version rmx3560 12+256 and flash to India version(maybe global).
Maybe i can post a tutorial later.
Give some tips.
1. Unlock bootloader
2.get the india version full update payload.bin
3.dump the image
4.use flashboot to flash 38 image
5.erase all user data
6.reboot
7.enjoy
View attachment 5655141
Click to expand...
Click to collapse
tamama9527 said:
I also buy china version rmx3560 12+256 and flash to India version(maybe global).
Maybe i can post a tutorial later.
Give some tips.
1. Unlock bootloader
2.get the india version full update payload.bin
3.dump the image
4.use flashboot to flash 38 image
5.erase all user data
6.reboot
7.enjoy
View attachment 5655141
Click to expand...
Click to collapse
can you please tell us where to get the india version full update payload.bin?
It should be free.
you need to use flashboot to flash "38" images file.
it is rmx3561 80w
https://gauss-compotacostauto-cn.al...22/06/30/88b3e9c479634f959ebef3792ed2869d.zip
here you go.
The 88b3e9c479634f959ebef3792ed2869d.zip is the RMX3560_11_A.35 OTA File, you wanted to post the RMX3561_11_A.09 OTA File.