hi, my rooted xperia xa f3111 does not turn on anymore - only the red light on (not blinking), tried another battery,tried to charge on pc and on wall charger too for long, pc doesnt recognise, tried all the button tricks but nothing.
any idea to bring it back to life?
Budaz187 said:
hi, my rooted xperia xa f3111 does not turn on anymore - only the red light on (not blinking), tried another battery,tried to charge on pc and on wall charger too for long, pc doesnt recognise, tried all the button tricks but nothing.
any idea to bring it back to life?
Click to expand...
Click to collapse
Only Sony service center can ressurect it by replacing the motherboard..
Sent from my Xperia XA using XDA Labs
aidy.lucas said:
Only Sony service center can ressurect it by replacing the motherboard..
Sent from my Xperia XA using XDA Labs
Click to expand...
Click to collapse
Yes..its true :good:
aidy.lucas said:
Only Sony service center can ressurect it by replacing the motherboard..
Sent from my Xperia XA using XDA Labs
Click to expand...
Click to collapse
i think i do not have warranty anymore after rooting and....etc
as i read it would cost a lot.
is it possible to recover data from 100% adopted microsd? ( google was not my friend )
/ i use windows 10 os /
thanks a lot for replies!
regards
mb
You can fix it via SP Flash tool
You need to get scatter file based firmware first then install VCOM usb driver and flash it via SP Flash tool.
Your sony xperia xa will back to life.
wrundawan said:
You need to get scatter file based firmware first then install VCOM usb driver and flash it via SP Flash tool.
Your sony xperia xa will back to life.
Click to expand...
Click to collapse
maybe im gonna get a working XA F3111 and im gonna try to create a scatter file.
does anyone going to need the scatter file?
Budaz187 said:
maybe im gonna get a working XA F3111 and im gonna try to create a scatter file.
does anyone going to need the scatter file?
Click to expand...
Click to collapse
Right now I need it, but it will work in a F3113?
Budaz187 said:
hi, my rooted xperia xa f3111 does not turn on anymore - only the red light on (not blinking), tried another battery,tried to charge on pc and on wall charger too for long, pc doesnt recognise, tried all the button tricks but nothing.
any idea to bring it back to life?
Click to expand...
Click to collapse
How did it happen?
ZalakVE said:
Right now I need it, but it will work in a F3113?
Click to expand...
Click to collapse
i dont know mate. im new in the android world.
Budaz187 said:
i dont know mate. im new in the android world.
Click to expand...
Click to collapse
Send it to me anyway please, I'm desperated
rrvuhpg said:
How did it happen?
Click to expand...
Click to collapse
i dont know exactly whats happened.
1 day my phone just got frozen and i could not turn it off or restart anymore and because straight after i started at my workplace and i used to use my phone for navigation i just connected to a brand new noname usb car charger with its original sony cable (it was the very first time to use this noname sh*t) and from the noname charger some smoke came out.....
-i really think that the motherboard is over cause this car charger so im not gonna be able to bring it back to life.
but some people have the same problem without using cheap charger and smoke so i wanna give a try with the scatter file.
how can i find out if the motherboard is working?
ZalakVE said:
Send it to me anyway please, I'm desperated
Click to expand...
Click to collapse
i will,
but i dont have much free time and its gonna be the first time for me to create a scatter.
and i still dont have that xperia in my hands....
Lot of people have bricked their Sony Xperia xa device and their is only way to fix this is to get scattered file based ROM and flash via sp tool.
For scattered file based ROM first need working device, then take backup of ROM through miracle box or any other in which you can create scattered file based ROM and then flash it on your bricked device via SP tool or similar.
wrundawan said:
Lot of people have bricked their Sony Xperia xa device and their is only way to fix this is to get scattered file based ROM and flash via sp tool.
For scattered file based ROM first need working device, then take backup of ROM through miracle box or any other in which you can create scattered file based ROM and then flash it on your bricked device via SP tool or similar.
Click to expand...
Click to collapse
yepp but many of them say also that their device is recognised as "vcom port" (or something like that) not?
how can i check if my device recognised like that? device manager? i dont see any changes during connecting/disconnecting in the device manager.
Need to install drives manually to get it detect as VCom device in device manager
wrundawan said:
Need to install drives manually to get it detect as VCom device in device manager
Click to expand...
Click to collapse
i did, i have the mediatek and mtk ports under the ports part in the device manager.
should i see any changes during connecting/disconnecting my xperia?
is it possible that my motherboard burnt but i still have the red light if its on charger?
Have you got scattered file based ROM from working Sony Xperia xa?
If yes then you should proceed with sp flash tool and flash it on your dead device.
wrundawan said:
Lot of people have bricked their Sony Xperia xa device and their is only way to fix this is to get scattered file based ROM and flash via sp tool.
For scattered file based ROM first need working device, then take backup of ROM through miracle box or any other in which you can create scattered file based ROM and then flash it on your bricked device via SP tool or similar.
Click to expand...
Click to collapse
No, no and no!! Don't claim that XA can be unbricked with a scatter file and SP flashtool or prove it! Show me a working scatter file for any XA or Ultra, show me that we can flash them with SP Flashtool.
Look at this links: http://forum.androidurdu.net/showthread.php?tid=1157 and http://forum.androidurdu.net/showthread.php?tid=943
It's you too??
You have successfully unbricked your device if you explain to Xda users how to do?? Can you release your scatter file?
You are giving fake hopes, and it's bad. (and make me very angry)
Not fake hopes. Sony Xperia xa is mtk6755. And can be fixed with sp tool.
If you have another way then explain here. If not then keep quite. As your making angry without any hopes and no help at all.
wrundawan said:
Not fake hopes. Sony Xperia xa is mtk6755. And can be fixed with sp tool.
If you have another way then explain here. If not then keep quite. As your making angry without any hopes and no help at all.
Click to expand...
Click to collapse
It's not because XA have an MT6755 that it works like any other MTK device and I know what I say (not you). I fully know how to unbrick a MTK device and Sony devices are an exception. Show me a working scatter file for a Sony device with SP Flashtool, the model you want!! Show me a Sony firmware ready for SP Flashtool!!
You speak like you knew it works and you did it but you are just an user with a bricked device, nothing more. You really think that nobody tried to extract a scatter file from Miracle box and use it with SP Flashtool? I repeat again, you are giving fake hopes!
Related
I would like to root my gf's Miro, but when I connect it, Flashtool asks me to pick a device from a list, and Miro isn't among them. Will everything be okay if I pick Tipo instead? Or which device should I pick instead?
Now, this wouldn't be a problem if this was my phone, because I'd just pick another phone and hope for the best, but my gf would be beyond furious if I messed something up, god forbid bricked her phone. So would picking Tipo or another model be 100% safe?
By the way, I'd like to downgrade to the previous firmware, root it, then flash back the newer one.
Thank you!
PearJuice said:
I would like to root my gf's Miro, but when I connect it, Flashtool asks me to pick a device from a list, and Miro isn't among them. Will everything be okay if I pick Tipo instead? Or which device should I pick instead?
Now, this wouldn't be a problem if this was my phone, because I'd just pick another phone and hope for the best, but my gf would be beyond furious if I messed something up, god forbid bricked her phone. So would picking Tipo or another model be 100% safe?
By the way, I'd like to downgrade to the previous firmware, root it, then flash back the newer one.
Thank you!
Click to expand...
Click to collapse
you already installed
Sony companion software to your PC, so that Flashtool can detect your phone.
Enable debugging mode on your phone (Setting>developer options) & enable unknown sources (Setting>security)
Connect your phone with usb and if prompt to select your device
Sent from my phone using xda-app
sembre said:
you already installed
Sony companion software to your PC, so that Flashtool can detect your phone.
Enable debugging mode on your phone (Setting>developer options) & enable unknown sources (Setting>security)
Connect your phone with usb and if prompt to select your device
Sent from my phone using xda-app
Click to expand...
Click to collapse
Flashtool still doesn't recognize it as a Miro, but it tells me to pick my device from a list, which doesn't feature Miro, only the other Xperias.
My question: Can I safely pick another type of Xperia when Flashtool prompts? If yes, which one should I pick?
PearJuice said:
Flashtool still doesn't recognize it as a Miro, but it tells me to pick my device from a list, which doesn't feature Miro, only the other Xperias.
My question: Can I safely pick another type of Xperia when Flashtool prompts? If yes, which one should I pick?
Click to expand...
Click to collapse
Disconnect phone from usb. Open flashtool. Get your fw files in Flashtool. Select the needed fw and click ok. Flashtool should bring up a window how to connect your phone. Oh and you should put your .ftf files in (flashtool folder)/firmwares
Soo8 said:
Disconnect phone from usb. Open flashtool. Get your fw files in Flashtool. Select the needed fw and click ok. Flashtool should bring up a window how to connect your phone. Oh and you should put your .ftf files in (flashtool folder)/firmwares
Click to expand...
Click to collapse
what flashtool version is it. if its a version released before sony released the miro it might not have miro flashtool drivers
gavster26 said:
what flashtool version is it. if its a version released before sony released the miro it might not have miro flashtool drivers
Click to expand...
Click to collapse
It's the newest one :/
may I know your xperia miro firmware?
Sent from my phone using xda-app
sembre said:
may I know your xperia miro firmware?
Sent from my phone using xda-app
Click to expand...
Click to collapse
That's also the newest, 11.0.A.5.5
I'd like to flash the 11.0.A.2.10 fw, root it with Bin4ry's app, then flash back to 11.0.A.5.5, that way, root will remain, or at least afaik this is a working method. I could root my Sola the same way (downgrade, root, upgrade), so I'm guessing it would work here too.
The only thing I'd like to know if there is any dangmer associated with me telling Flashtool that the Miro is, I don't know, a Tipo or J. Will it mess up the flashing process? I of course have the correct Miro firmwares in ftf-s.
PearJuice said:
That's also the newest, 11.0.A.5.5
I'd like to flash the 11.0.A.2.10 fw, root it with Bin4ry's app, then flash back to 11.0.A.5.5, that way, root will remain, or at least afaik this is a working method. I could root my Sola the same way (downgrade, root, upgrade), so I'm guessing it would work here too.
The only thing I'd like to know if there is any dangmer associated with me telling Flashtool that the Miro is, I don't know, a Tipo or J. Will it mess up the flashing process? I of course have the correct Miro firmwares in ftf-s.
Click to expand...
Click to collapse
Try flashing an older kernel and root it there,then reflash the new kernel.(from the new fw)
This is flashtool 0.9.2.0
http://www.mediafire.com/?yuehvcd4893bzqt
And this firmware 10
http://content4.wuala.com/rawconten...AMcg/ST23i_11.0.A.2.10_CentralEurope.ftf?dl=1
Sent from my GT-S5570 using xda app-developers app
no need to downgrade..
PearJuice said:
That's also the newest, 11.0.A.5.5
I'd like to flash the 11.0.A.2.10 fw, root it with Bin4ry's app, then flash back to 11.0.A.5.5, that way, root will remain, or at least afaik this is a working method. I could root my Sola the same way (downgrade, root, upgrade), so I'm guessing it would work here too.
The only thing I'd like to know if there is any dangmer associated with me telling Flashtool that the Miro is, I don't know, a Tipo or J. Will it mess up the flashing process? I of course have the correct Miro firmwares in ftf-s.
Click to expand...
Click to collapse
download unlock root the free version and root it .... much easier...
For any member of this forum.
Can you help me to unbrick my XL because my xperia l has hardbrik yesterday
That begin when I want to change external memory to internal memory and I had edited fold.fstab file
after I reboot my phone, on notification bar appear about error on my internal memory and must be format..
so I format my internal memory
and I turn off my phone..
after that I can't turn on my phone again..
maybe my phone has corrupt obout file system/partition
and haven't bootloader..
I can't flash use flashtool because my phone not detected on computer. fastboot also not detected..
but when I press vol up+vol down and connect to usb cable on my PC
it show about qhsusb-dload device ..
after I search on google and xda I feel have solution..
1 .Use QPST SOFTWARE FROM QUALCOMM
from this tutorial (indonesian) >" http://rendy37.wordpress.com/2013/08/30/tutorial-unbrick-andromax-u-dualcore-terdeteksi-qualcomm-hs-usb-qdloader-90089006/"
but I can't find mbn and hex files for msm8230 qualcom device
anyone can help to searh mbn/hex files msm8230 !
2. Use dump/backup mmcblkp0 file of xperia l
after I read this tutorial > "http://forum.xda-developers.com/showthread.php?t=2439367"
I think that trick also will work on msm8230/xperia l device because SIII use msm8960 qualcomm that same version/generation of qualcomm soc..
so anyone can upload dump/backup file of xperia 4.1.2 mmcblk0 for me.. !
3. or anyone have other solution...
thanks before..
sory for my bad english and my thread because I create it via operamini..
I have the same problem pls share hex/hxb files
Please Post
krynin said:
i have the same problem pls share hex/hxb files
Click to expand...
Click to collapse
gkohar said:
for any member of this forum.
Can you help me to unbrick my xl because my xperia l has hardbrik yesterday
that begin when i want to change external memory to internal memory and i had edited fold.fstab file
after i reboot my phone, on notification bar appear about error on my internal memory and must be format..
So i format my internal memory
and i turn off my phone..
After that i can't turn on my phone again..
Maybe my phone has corrupt obout file system/partition
and haven't bootloader..
I can't flash use flashtool because my phone not detected on computer. Fastboot also not detected..
But when i press vol up+vol down and connect to usb cable on my pc
it show about qhsusb-dload device ..
After i search on google and xda i feel have solution..
1 .use qpst software from qualcomm
from this tutorial (indonesian) >" http://rendy37.wordpress.com/2013/08/30/tutorial-unbrick-andromax-u-dualcore-terdeteksi-qualcomm-hs-usb-qdloader-90089006/"
but i can't find mbn and hex files for msm8230 qualcom device
anyone can help to searh mbn/hex files msm8230 !
2. Use dump/backup mmcblkp0 file of xperia l
after i read this tutorial > "http://forum.xda-developers.com/showthread.php?t=2439367"
i think that trick also will work on msm8230/xperia l device because siii use msm8960 qualcomm that same version/generation of qualcomm soc..
So anyone can upload dump/backup file of xperia 4.1.2 mmcblk0 for me.. !
3. Or anyone have other solution...
Thanks before..
Sory for my bad english and my thread because i create it via operamini..
Click to expand...
Click to collapse
please post someone, many of us having this problem
Hi guys, so i have the same problem with my xperia l.
But my friend have a working one. Is it possible to get the hex and mbn and that backup of mmcblk0 from that device ? If yes please tell me how to or give me a link to a tutorial and i'll upload that files.
No solution yet?
opps i also am stuck here, any idea how to solve ? or steps ? really appreciated if anyone can help
I have been stuck over here for a long time I and my Friend are trying to solve the problem at the Moment, but didn't any success yet. If you guys can help then Please Try to Search for MSM8230.HEX file.
If you get the file then please reply me through mail or reply here.
was sucessfully able to generate mbn file with a chinese tutorial (thx google for translation)
i have :
partition0.bin
partition.xml
rawprogramming.xml
8230_msm.mbn
all we need now is MPRG8230.hex or MPRG8x30.hex
anyone have this(or know how to extract? my device is working)
Sent from my C2105 using XDA Free mobile app
I have the same problem
SdtBarbarossa said:
was sucessfully able to generate mbn file with a chinese tutorial (thx google for translation)
i have :
partition0.bin
partition.xml
rawprogramming.xml
8230_msm.mbn
all we need now is MPRG8230.hex or MPRG8x30.hex
anyone have this(or know how to extract? my device is working)
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
can you share the link..??
syahru96 said:
can you share the link..??
Click to expand...
Click to collapse
sdtbarbarossa.bplaced.net
Sent from my Xperia T using XDA Free mobile app
I'm sorry for reviving such an old thread, by recently my xperia l turned off on its own. i've tried but can't enter flashmode/fastboot. no response from the phone except my pc detects it and looks for QHSUSB_DLOAD drivers. i'm wondering if anyone's found a solution to this? i've been searching for a while now and all the threads/sites i came across haven't helped.
cascabel said:
I'm sorry for reviving such an old thread, by recently my xperia l turned off on its own. i've tried but can't enter flashmode/fastboot. no response from the phone except my pc detects it and looks for QHSUSB_DLOAD drivers. i'm wondering if anyone's found a solution to this? i've been searching for a while now and all the threads/sites i came across haven't helped.
Click to expand...
Click to collapse
Dang, what did you do before it turned off?
Joel16 said:
Dang, what did you do before it turned off?
Click to expand...
Click to collapse
i went back to stock rom. everything was fine. next day i was browsing and left it on the table 'cause i had something to do. when i went back for it it was already dead.
looks like a hard brick. good news is i can try stuff i wouldn't have if it was still working. currently looking for XL's test points.:laugh:
cascabel said:
i went back to stock rom. everything was fine. next day i was browsing and left it on the table 'cause i had something to do. when i went back for it it was already dead.
looks like a hard brick. good news is i can try stuff i wouldn't have if it was still working. currently looking for XL's test points.:laugh:
Click to expand...
Click to collapse
XL dont have a testpoint.... i already searched for it .... we did so damn much trys in the past
.... as long as you dont get a MPRG8230.hex ....you are doomed...
JTag is the only option
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
XL dont have a testpoint.... i already searched for it .... we did so damn much trys in the past
.... as long as you dont get a MPRG8230.hex ....you are doomed...
JTag is the only option
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
well that's not good.
can you point me to a thread regarding MPRG8230.hex? good news is that the phone is recognized by setool. will see if anything good comes out of that.
if you have much time to try.... download qpst .... and get any mprg hex ....and try to find out what is our start code^^ (the first line....)
SdtBarbarossa said:
if you have much time to try.... download qpst .... and get any mprg hex ....and try to find out what is our start code^^ (the first line....)
Click to expand...
Click to collapse
got it. will do once i get some free time.
ok i have qpst. will be trying it this weekend (fingers crossed).
@SdtBarbarossa(or anyone interested) have you seen this: http://forum.gsmhosting.com/vbb/f672/experia-l-c2105-read-n-write-full-dump-not-success-1889128/
i can't access any of the links posted. it's probably my isp since there's a storm now and my connection is pretty unstable. just posting it for anyone who wants to take a look. you guys probably have seen it already.
Edit:
Not sure if I should be happy, but now the phone actually shows signs of life. for a split second when i plug in the cable, a green light flashes. i'm not if sure if that's a good or bad thing.
sob...still waiting
No Solution yet?
S1tool - taoshan seems not supported so our best hope is to really wait for someone to upload the hex file.
we really need the .hex file. unfortunately, no one has uploaded it anywhere. we may be able to use a .qcn file from a working phone though. not sure how much that would help, but at this point it's all we've got realistically.
---------- Post added at 05:50 PM ---------- Previous post was at 04:57 PM ----------
Does anyone still have the .mbn and .bin file?
Hi there,
1. I am fed up of my Tipo's lagging touch (responding after half an hour, miscaliberation). I update the firmware using Sony companion and tried to install one of the Jelly Bean roms on the stock ICS using CMW. It some how soft bricked my phone. Can any one tell the reason?
2. With lot of effort I installed the stock ST21a 11.0.A.4.22 Sony Generic kernel (using Flashtool). It is same laggy and miscaliberating. Did I not reformat, similar to PC? shouldn't it be fresh and new ?
3. I am not trying to install JB rom. What is the correct way to install? Should I worry about any seperate parts like Kernel?
4. To install JB rom (Paranoid Android) I tried to root the device, but the flash tool says "no root exploit for this version". If i cant root. I cant install CMW. I cant install frest rom. Is there any other way to install ROM?
I am stuck in the above points after my research, and will appreciate your help.
Thanks in advance
adithyavr said:
Hi there,
1. I am fed up of my Tipo's lagging touch (responding after half an hour, miscaliberation). I update the firmware using Sony companion and tried to install one of the Jelly Bean roms on the stock ICS using CMW. It some how soft bricked my phone. Can any one tell the reason?
2. With lot of effort I installed the stock ST21a 11.0.A.4.22 Sony Generic kernel (using Flashtool). It is same laggy and miscaliberating. Did I not reformat, similar to PC? shouldn't it be fresh and new ?
3. I am not trying to install JB rom. What is the correct way to install? Should I worry about any seperate parts like Kernel?
4. To install JB rom (Paranoid Android) I tried to root the device, but the flash tool says "no root exploit for this version". If i cant root. I cant install CMW. I cant install frest rom. Is there any other way to install ROM?
I am stuck in the above points after my research, and will appreciate your help.
Thanks in advance
Click to expand...
Click to collapse
First Of All Its CWM
Secondly You Should Try Locking The Bootloader And Reflash The ftf Or in PC Companion Click Update And Then Repair Phone
Re
Asingh18 said:
First Of All Its CWM
Secondly You Should Try Locking The Bootloader And Reflash The ftf Or in PC Companion Click Update And Then Repair Phone
Click to expand...
Click to collapse
Thanks a lot for the insightful post of two lines. Have already tried that. Can any one reply point by point. I want the answer more in perspective of learning than one time solution.
Thanks
OK I Got Your Back
adithyavr said:
Thanks a lot for the insightful post of two lines. Have already tried that. Can any one reply point by point. I want the answer more in perspective of learning than one time solution.
Thanks
Click to expand...
Click to collapse
FIRSTLY BACKUP THE IMPORTANT STUFF
Steps To Follow -
1. Download Flashtool (I'm Guessing You Don't Have That Yet)
2. Click On The Thunder Icon
3. Click Flashmode
4. There You Would Find A .ftf File Saying Device X10 Version V1 BRELock bla bla..Click OK
5. Then Take Out Your Sd Card And SIM Card And Using A USB Cable Connect Your Device While Pressing The Down Button
6. If You See A Green LED Flash On Your Phone Just Wait Until It Flashes
7. After flashing Is Complete Let Your Phone Reboot
8. Then Attach Your Device To Your PC
9. Go to PC Companion And Press Update Device
10. It Would Say You Don't Have An Update And Have An Option "Repair Phone"
11. Click On That Wait Until It Downloads And Updates
And Viola Your Phone Would Look Fresh As A New One
Asingh18 said:
FIRSTLY BACKUP THE IMPORTANT STUFF
Steps To Follow -
1. Download Flashtool (I'm Guessing You Don't Have That Yet)
2. Click On The Thunder Icon
3. Click Flashmode
4. There You Would Find A .ftf File Saying Device X10 Version V1 BRELock bla bla..Click OK
5. Then Take Out Your Sd Card And SIM Card And Using A USB Cable Connect Your Device While Pressing The Down Button
6. If You See A Green LED Flash On Your Phone Just Wait Until It Flashes
7. After flashing Is Complete Let Your Phone Reboot
8. Then Attach Your Device To Your PC
9. Go to PC Companion And Press Update Device
10. It Would Say You Don't Have An Update And Have An Option "Repair Phone"
11. Click On That Wait Until It Downloads And Updates
And Viola Your Phone Would Look Fresh As A New One
Click to expand...
Click to collapse
He said that he already tried that! Oh, and capital letters are just for the first word of a sentence and names. Not Like This.
@OP: have you tried this:
http://forum.xda-developers.com/xperia-j-e/themes-apps/apk-touch-issue-solved-t2068082
It's an .apk that let's you recalibrate your touch(official patch by Sony).
Hope that helps!
Mats
Sent from my Xperia E dual using XDA Premium 4 mobile app
MatsPunt said:
He said that he already tried that! Oh, and capital letters are just for the first word of a sentence and names. Not Like This.
@OP: have you tried this:
http://forum.xda-developers.com/xperia-j-e/themes-apps/apk-touch-issue-solved-t2068082
It's an .apk that let's you recalibrate your touch(official patch by Sony).
Hope that helps!
Mats
Sent from my Xperia E dual using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey man appreciate it
He said that he tried flashing the stock ftf i'm recommending him to use PC Companion
Asingh18 said:
Hey man appreciate it
He said that he tried flashing the stock ftf i'm recommending him to use PC Companion
Click to expand...
Click to collapse
Yeah, but those two have the same effect. Repairing with PC Companion is exactly the same as flashing a .ftf. And if that didn't work, PC Companion won't.
Mats
Sent from my Xperia E dual using XDA Premium 4 mobile app
Well this is started happening and i have done a device repair on the pc companion before that from around 3 week's and the phone book doing the same thing when i tryes to call some one the keyboard opens and start doing the same thing by it self like i sad i have done a device repair on the pc companion i thout sending it to service will that help or they will make a factory reset also thevreson y i have made a phone repair that the battery drains and the stamina gives me wrong readings for the draining time like 4 dayes and 13 hour and it lasts 1 day only something is worng here :/:fingers-crossed
I have z3 dual
1
1..............................
You might need to flash the firmware again mate. Use flashtool.
Is it safe no warranty false??
Can you tell me what exactly the pc companion repair do??
Lord Takyon said:
You might need to flash the firmware again mate. Use flashtool.
Click to expand...
Click to collapse
And the flashing methoud is something different than the pc companion repair???
Lord Takyon said:
You might need to flash the firmware again mate. Use flashtool.
Click to expand...
Click to collapse
No answer yet??
It is a software problem. You need to flash your firmware again "with Flashtool" cause Sony's companion is crap
Hi, I got Xperia L c2105, unlocked bootloader, root, installed resurrectionremix, all fine. Then I wanted to resize partitions to get more space for apps. Obviously I did it wrong and now my phone can't get into fastboot or flashmode. When I connect it to PC and press power btn it shows as Qualcomm HS-USB QDLoader 9008 (COM5) in device manager. I understand I have to somehow flash kernel using some special tools for qualcomms, right? Could you guide me to something I need? I don't exactly know what to look for.
Mighty_Ahti said:
Hi, I got Xperia L c2105, unlocked bootloader, root, installed resurrectionremix, all fine. Then I wanted to resize partitions to get more space for apps. Obviously I did it wrong and now my phone can't get into fastboot or flashmode. When I connect it to PC and press power btn it shows as Qualcomm HS-USB QDLoader 9008 (COM5) in device manager. I understand I have to somehow flash kernel using some special tools for qualcomms, right? Could you guide me to something I need? I don't exactly know what to look for.
Click to expand...
Click to collapse
If you tampered with the partition and changed something you shouldn't then I don't think there is a fix cause each phone has a unique one
Im trying to fix it using this guide here. I agree with you that each phone needs unique files to do so. I hope somebody can help me find those files.
I guess I need :
prog_emmc_firehose_8974.mbn or something like this for xperia
rawprogram0.xml for xperia
patch0.xml for xperia
I don't know how to get them, where to find them and exactly what do they do. It's just something I come up with comparing various tutorials on how to unbrick qualcomms. The first one probably might be used for different phones but later two I think must be for xperia only.
Edit: Another approach might be to follow this tutorial to backup using friend's phone, and then restore it on my phone. But I don't know if it will work.
this is what is messing with partitions = HARDBRICK
Sent from my Xperia L using XDA-Developers mobile app
Hipom said:
this is what is messing with partitions = HARDBRICK
Sent from my Xperia L using XDA-Developers mobile app
Click to expand...
Click to collapse
I am aware of that, yet still want to move unused space from internal memory (~4GB) to this memory where apps can reside (~1.5GB on fresh rom)
I got qcn but cant recover it because bricked phone is in download mode.
How to get needed files to flash it in this mode?
Can I extract them from this qcn?
If you find a way, tell me. I am also looking for one.
My device is recognised by PC as Qualcomm HS-USB QDLoader 9008 in Device Manager in Windows 10.
Here are required drivers.
What next? Need to find a way to restore these paritions on Xperia L.
Latest QFIL app HERE.
Now we need those needed files...
And. I guess these can't be restored because that area is specific for every device. That's it I guess, HARD BRICK. The only way is to buy Xperia L motherboard from somewhere.
Still, though. mmcblk0.img
Still looking for idea what next
So far this is most helpful but its not a solution
At this point I have no idea what to do with this .img file
guys hardbrick means you are not gonna get it working unless you change the motherboard
you could find a second hand Xperia L for about 50 bucks! thats nothing!
Do you remember what you actually was doing while resizing? Was it via adb, can you post log? I did it other way: resized on the stock rom, then flashed resurrection, everything worked perfect. But bricked my baby while wiping data for other rom, don't know what's going on.
I switched mobos but still, for science purposes would like to know how to fix that. I used twrp to swap memory, but it ended up formatting it completely.
How to get hex file?
Hello I have the same problem.
The only way I have found is to use a programming box setool-3
If someone have solved please tell me how.
Did you find anything useful that really worked??
Mighty_Ahti said:
Hi, I got Xperia L c2105, unlocked bootloader, root, installed resurrectionremix, all fine. Then I wanted to resize partitions to get more space for apps. Obviously I did it wrong and now my phone can't get into fastboot or flashmode. When I connect it to PC and press power btn it shows as Qualcomm HS-USB QDLoader 9008 (COM5) in device manager. I understand I have to somehow flash kernel using some special tools for qualcomms, right? Could you guide me to something I need? I don't exactly know what to look for.
Click to expand...
Click to collapse
I have done the same mistake. Did you find anything useful that really worked?? Do tell me if you get any solution.Thanks!!!
---------- Post added at 02:47 PM ---------- Previous post was at 02:44 PM ----------
moralderherren said:
Do you remember what you actually was doing while resizing? Was it via adb, can you post log? I did it other way: resized on the stock rom, then flashed resurrection, everything worked perfect. But bricked my baby while wiping data for other rom, don't know what's going on.
Click to expand...
Click to collapse
same thing happened to me. I tried to use QPST but it wont work without the proper .mbn and .hex file. If you get the solution please post it here
---------- Post added at 02:51 PM ---------- Previous post was at 02:47 PM ----------
Kianush said:
guys hardbrick means you are not gonna get it working unless you change the motherboard
you could find a second hand Xperia L for about 50 bucks! thats nothing!
Click to expand...
Click to collapse
Changing the motherbord should be the last resort, dont you think?? And again a mobile is not truly bricked unless it's hardware is damaged...
Can you tell me where i can get the motherboard for minimal price in India. I have searched on net and there are no specific results. So please tell me where did you get that motherboard??
@AndroGeek17 Sorry bro, in this case new motherboard is necessary indeed.
Where i can get a motherboard
Option58 said:
@AndroGeek17 Sorry bro, in this case new motherboard is necessary indeed.
Click to expand...
Click to collapse
Can you tell me where i can get the motherboard for my mobile. Buying it from Sony Centres is not an option since their cost is higher than current value of my device. If you have any better ideas, please do tell me.
Thanks!!!
AndroGeek17 said:
Can you tell me where i can get the motherboard for my mobile. Buying it from Sony Centres is not an option since their cost is higher than current value of my device. If you have any better ideas, please do tell me.
Thanks!!!
Click to expand...
Click to collapse
Yes that's what they told me as well. In the end I bought a new device with a little more than 100$.
If you find out tell me I wanna know too...
But it is not worth it to fix L. Even if you found new mobo for 50$ somehow, new device is double that price but much more worth.