Hi guys, my name is Alessandro and I've just rooted my Z3. I've seen there are many Sound Mods out there and I'd like to know which one you'd suggest me to try with. Which one produces the best sound according to you?
I was also thinking about a small portable amp for my 16 ohm earbuds. Do you use one?
Thank you!
If I had to choose one I would go with this one http://forum.xda-developers.com/cro...-dontbelive-marshmallow-stereomod-v1-t3366065 as it seems it's the more clean one
I don't really like sound mods because many of them look like "hey we got beats, dolby, whateveryouwanttoinserthere" and then it's like... "so many stuff, does this really even work?" I like the way the original audio config for Xperia Z3 sounds, anyways you can also try using new libraries from stock sony roms (don't remember if it was on cross device or cross themes, but it was a port from androidexpert35) in the case your rom doesn't have the libraries updated already.
Also, watch out for mods that "amplify" the audio quality of your phone, many cause a crackling noise because they add a number that comes to their head instead of following the sound chipset config (this is from personal experience as I restored the original sound quality for xperia zl and z in cyanogenmod builds (unreleased job))
P.S: Do a backup of your current rom with TWRP before flashing any "sound mod" because if you have some regrets you'll regret even more not having a backup and then having to spend hours flashing again stock rom and getting your system back to what it was before flashing anything
Oh I forgot to mention that I use a pair of Sony ZX310 headphones when listening to music with the following configuration on sound enhancement (stock rom):
DSEE HX: On
Surround Sound (VPT): Studio
Equalizer
400: 0
1k: -3
2.5k: +3
6k: +3
16kHz: 0
Clear Bass: Adjust between 4 and 8 (6 is preferable but adjust to your needs)
xkeita said:
If I had to choose one I would go with this one http://forum.xda-developers.com/cro...-dontbelive-marshmallow-stereomod-v1-t3366065 as it seems it's the more clean one
I don't really like sound mods because many of them look like "hey we got beats, dolby, whateveryouwanttoinserthere" and then it's like... "so many stuff, does this really even work?" I like the way the original audio config for Xperia Z3 sounds, anyways you can also try using new libraries from stock sony roms (don't remember if it was on cross device or cross themes, but it was a port from androidexpert35) in the case your rom doesn't have the libraries updated already.
Also, watch out for mods that "amplify" the audio quality of your phone, many cause a crackling noise because they add a number that comes to their head instead of following the sound chipset config (this is from personal experience as I restored the original sound quality for xperia zl and z in cyanogenmod builds (unreleased job))
P.S: Do a backup of your current rom with TWRP before flashing any "sound mod" because if you have some regrets you'll regret even more not having a backup and then having to spend hours flashing again stock rom and getting your system back to what it was before flashing anything
Oh I forgot to mention that I use a pair of Sony ZX310 headphones when listening to music with the following configuration on sound enhancement (stock rom):
DSEE HX: On
Surround Sound (VPT): Studio
Equalizer
400: 0
1k: -3
2.5k: +3
6k: +3
16kHz: 0
Clear Bass: Adjust between 4 and 8 (6 is preferable but adjust to your needs)
Click to expand...
Click to collapse
I agree with you. I'm looking for something which can improve the audio output quality of the Z3, not just for remarkable names.
Is it possible to couple V4A with the Sony Audio Enhancements?
Brutale1090! said:
I agree with you. I'm looking for something which can improve the audio output quality of the Z3, not just for remarkable names.
Is it possible to couple V4A with the Sony Audio Enhancements?
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
try one of these, the audio quality on headphones directly depend on the quality of the headphone,
Ans the settings you set on your headphone selection on V4A, I got Sony MDR-NC33 Noise which is pretty enough for me, other V4A can be experiment and find out with respect to the headphone,
see for yourself bro, and one thing the audio mods above are far more better than Sony Audio Enhancement, I tested it and tried not to leave sony stuff coz z3 coz like 40k here but at the end of the day there are more options on V4A and you can combine it with Dolby Atmos MOD mad by bro guitardedhero, cya just sharing my opinions and experiences
Black Plague said:
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
try one of these, the audio quality on headphones directly depend on the quality of the headphone,
Ans the settings you set on your headphone selection on V4A, I got Sony MDR-NC33 Noise which is pretty enough for me, other V4A can be experiment and find out with respect to the headphone,
see for yourself bro, and one thing the audio mods above are far more better than Sony Audio Enhancement, I tested it and tried not to leave sony stuff coz z3 coz like 40k here but at the end of the day there are more options on V4A and you can combine it with Dolby Atmos MOD mad by bro guitardedhero, cya just sharing my opinions and experiences
Click to expand...
Click to collapse
Thank you so much for your opinion! Wich audio mod works good combined with V4A. I mean, how do I know if some libraries will be in conflict with V4A? Which combos have you already tested?
I think you should probably install V4A and not mix it with other stuffs...
Do I have to disable the original Sony Soundenhancement.apk to use V4A?
Brutale1090! said:
Do I have to disable the original Sony Soundenhancement.apk to use V4A?
Click to expand...
Click to collapse
I think ARISE WORKS BETTER,
forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
that developer guitardedhero and his team are constantly updating but the the other mod that Xtreme Music is fairly good but I think he havent updated in a while and he also get banned sometimes for ad-links by the mods, any way it upto your choice I prefer more of that guitardedhero and its more stable I think, I tried both mixed in early stages of arise and xtreme music, the the sound was awesome, I got like 3 system equalizers, one for V4A, other DolbyAtmos and Xtreme Music Equalizer working simultaneously at a time, it was great, I had to throw sony's sound enhancement (sorry sony) stuff completely since if conflicts with other V4A and DolbyAtmos,
just back up your current rom, and try things out mixing them, if they dont work just google it people always have similar problems like tweaking startup init script and other workarounds.
And one last thing use powerAMP beta 3 for audio playback throw that sony music app aka walkman, it supports FLAC and has good UI and sound engine too, works with V4A. Just my experiences bro, try and find out for yourself,
http://forum.powerampapp.com/index.php?/topic/8810-poweramp-alpha-build-703704/
And one thing get a XDXC 64 gigs SD card, listen to flac audios only n cheap mp3 ****s, if you need any flac songs pm me, i got 300gigs of it
I'm trying some specific mods for the Z3, actually the last version of the Dontbelieve's mod. Arise will be my next step. How do I disable the original Sony sound enhancement when playing with arise?
Brutale1090! said:
I'm trying some specific mods for the Z3, actually the last version of the Dontbelieve's mod. Arise will be my next step. How do I disable the original Sony sound enhancement when playing with arise?
Click to expand...
Click to collapse
Up
Up
Brutale1090! said:
Up
Click to expand...
Click to collapse
I upgraded the sound driver to latest Xperia XZ one
How do I disable the original Sony Sound Enhancement? It is conflicting with v4a
Everything working. Guys, nothing can be compared with ARISE. Harder to configure, but way better results.
Not sure if this information is useful to anyone but here it is.
Basically after nougat update Poweramp music player's 24bit playback mode fails to activate (even with latest 704 alpha installed). So those audiophile among us might be super annoyed .
Solution, add this line to build.prop , this has enabled 16bit 192khz playback on aicp7.1.2
ro.lenovo.hifi_support=true
Text would be better so anyone can copy-paste the settings!
Worked for LOS14.1
Small update , it seems that someone on the Poweramp forums has managed to enable 24/192 playback by tricking the phone into thinking it has Samsung software .
Anyone have any idea what he added to the build.prop?
philipnzw said:
Small update , it seems that someone on the Poweramp forums has managed to enable 24/192 playback by tricking the phone into thinking it has Samsung software .
Anyone have any idea what he added to the build.prop?
Click to expand...
Click to collapse
If you want the best audio you can get out of your phone, install viper4arise. (and use esira/eleven)
Edit: Viper does not activate 192khz playback, because its useless (for a smartphone with only 1 aux output) read why here.
wertus33333 said:
If you want the best audio you can get out of your phone, install viper4arise. (and use esira/eleven)
Edit: Viper does not activate 192khz playback, because its useless (for a smartphone with only 1 aux output) read why here.
Click to expand...
Click to collapse
Hires audio is a complicated subject. I think it works for me because of the placebo effect ? Lmao
However, I'm also just a hobbyist looking to tinker around.
If I can recall correctly , most forms of audio mods on Android increases the noise floor by a significant amount, making everything sound quite messy (but I haven't tested arise yet) .
Just looking to share info around and spread the fun of tinkering
philipnzw said:
Hires audio is a complicated subject. I think it works for me because of the placebo effect ? Lmao
However, I'm also just a hobbyist looking to tinker around.
If I can recall correctly , most forms of audio mods on Android increases the noise floor by a significant amount, making everything sound quite messy (but I haven't tested arise yet) .
Just looking to share info around and spread the fun of tinkering
Click to expand...
Click to collapse
I had this problem with arise too, but you can reduce the "output gain" to reduce the quality loss while amplifying the signal (just remember to set it back if you need a louder signal, e.g. for small speakers). Like that i was able to completely anulate the small glitches and rushing/shizzling (or at least i dont hear it anymore xD).
I've tried dozens of sound mods (even changed roms for it) and the best (and most stable) solution for me is viper.
You however have to try around and install the arise modules one-by-one and then setting everything suitable for your needs (Profiles, add-ons like atmos).
But its worth it, even my 24bit 192Khz computer sound sounds bad now! :crying:
And? How do you like Arise? ^^
wertus33333 said:
And? How do you like Arise? ^^
Click to expand...
Click to collapse
Seems pretty fine to me but I didn't play with it much since non of my earphones seem to respond well with it
philipnzw said:
Seems pretty fine to me but I didn't play with it much since non of my earphones seem to respond well with it
Click to expand...
Click to collapse
What Earphones do you have?
For my somic/Xiaomi In-ear's it works perfectly (Arise core+atmos +Sono's headphone profile) i only use Atmos for more bass (e.g. drum n bass/goa).
But Mi4c/s is a ***** concerning audio (i think to remember flashing rom for rom to get good audio, but thats some time ago) xD
wertus33333 said:
What Earphones do you have?
For my somic/Xiaomi In-ear's it works perfectly (Arise core+atmos +Sono's headphone profile) i only use Atmos for more bass (e.g. drum n bass/goa).
But Mi4c/s is a ***** concerning audio (i think to remember flashing rom for rom to get good audio, but thats some time ago) xD
Click to expand...
Click to collapse
Kz zse , zst
And a piston hybrid
Yeah smartphone audio might just be average unless if its a LG V series .
Either way I'm planning on saving up for a dac or perhaps DAP in the future haha.
philipnzw said:
Kz zse , zst
And a piston hybrid
Yeah smartphone audio might just be average unless if its a LG V series .
Either way I'm planning on saving up for a dac or perhaps DAP in the future haha.
Click to expand...
Click to collapse
The Piston hybrid sound damn good to me with Sonophilos headphone profile and dolby atmos (but i'm on Oneplus2).
Make sure you get a DAC thats supported by viper if you get one ;P
24bit 192khz
I bet this one will work, tested on redmi note 4 mido
Change ro.product.manufacturer=Samsung
And add these lines from audio lines= persist.audio.uhqa=1
Hope it works, thanks me later
cerberus2596 said:
I bet this one will work, tested on redmi note 4 mido
Change ro.product.manufacturer=Samsung
And add these lines from audio lines= persist.audio.uhqa=1
Hope it works, thanks me later
Click to expand...
Click to collapse
This trick just send 192khz audio PCM data to Android audio resampler, after that audio data will be resampled to 48khz/16bit for output.
philipnzw said:
Not sure if this information is useful to anyone but here it is.
Basically after nougat update Poweramp music player's 24bit playback mode fails to activate (even with latest 704 alpha installed). So those audiophile among us might be super annoyed .
Solution, add this line to build.prop , this has enabled 16bit 192khz playback on aicp7.1.2
ro.lenovo.hifi_support=true
Click to expand...
Click to collapse
For me this line is the one that works.
However, in my hi-res output option, DVC is always enabled.
As it's conflicting with Dolby, how to forcefully disable it?
Hi,
after trying out (so) many equalizers.. apk's, this is the very best one of them all absolutely, the sound quality is superb and its much better than an "SP mod mcu", the sound note is incredibly audible and everything is on his right place, you hear every little detail of the song note coming from your car speakers, really amazing.. according to my hearing, it was an enjoyed ride listening to Jackie Brown (movie songs) 110th streets, Barry (Black) White, Tony Brixton, L. Richie and so on.. I didn't like the vaper4android much so I didn't "installed" it second time, instead of it, I used another equalizer, but this new one is oh man oh what an incredible sound quality this combination of headunit-car-speakers you gonna get from this: Eqfy Equalizer v1.1.3 build 24.apk mate.
Settings of the car headunit:
Pop & loud + reduces the boss (tastes is different indeed) gain a bit.
Settings of the Eqfy (click on 3 ... dut) equalizer:
Pop + increases the gain up to +10 or +12, (tastes is different!)
gain boost is checked/ticked,
enhanced bass is checked/ticked,
bands overlap is checked/ticked,
you do not need any custom (sp) mcu etc after you (using) listen to this new one mate.. the heard sound music sounds like a expensive hi-fi installation (like the Yamaha dsp1 which I had in the long past) and it is even much better.
I wanted to share my experiences with you guys so that you gonna enjoying listening to your lovely (old) songs on the highway.
Oh, before I forget.. google is my dear friend.. you understand me.. right?.. you're welcome mate.
Indeed, it is an awesome app, really sounds so good. Already purchased de apk. The wadzio amp do not work with deezer, but this thing do, and do it so well. Thank for the tip.
jerrymh said:
Indeed, it is an awesome app, really sounds so good. Already purchased de apk. The wadzio amp do not work with deezer, but this thing do, and do it so well. Thank for the tip.
Click to expand...
Click to collapse
That cannot be correct, unless the mod is not fully installed with patched MCU, as wadzio mod is a true hardware control (of the dsp) mod.
jerrymh said:
Indeed, it is an awesome app, really sounds so good. Already purchased de apk. The wadzio amp do not work with deezer, but this thing do, and do it so well. Thank for the tip.
Click to expand...
Click to collapse
Hi,
Enjoyed mate.
= = = = =
Clearing things out!!..
what is Equalizer?: is the process of adjusting the balance between frequency components within an electronic signal, which boost or cut bass or treble frequencies, to adjust the timbre of individual instruments and voices by adjusting their frequency content and to fit individual instruments within the overall frequency spectrum of the mix.
what is DSP = Digital Signal Processor?:
A DSP is a specialized microprocessor (Chip) , with its architecture optimized for the operational needs of digital signal processing, by filter or compress continuous the sound signal.
if I install a mod -sp- mcu file on my headunit, do I hear (get) a dsp sound quality? Not always, because it depends on the purchased head unit, is it equipped with a dsp chip? if not, then forget it. this is a simple explanation.
now what does an PRO Made sp mcu mod file do? exactly what this Eqfy does, filter or compress or adjusting the balance continuous of the sound signal (kind of a dsp) by refining and moving (cut off) the low mid and high sound tones into the right place and then forwarding them to the car speakers. again simply explained.
Where is it in playstore? I cannot find it?
BlueChris said:
Where is it in playstore? I cannot find it?
Click to expand...
Click to collapse
Hi,
Really mate? haha.. https://play.google.com/store/search?q=Eqfy+Equalizer+v1.1.3+build+24.apk&c=apps
€2,99 the first one!
Seicane-Misery said:
Hi,
Enjoyed mate.
= = = = =
Clearing things out!!..
what is Equalizer?: is the process of adjusting the balance between frequency components within an electronic signal, which boost or cut bass or treble frequencies, to adjust the timbre of individual instruments and voices by adjusting their frequency content and to fit individual instruments within the overall frequency spectrum of the mix.
what is DSP = Digital Signal Processor?:
A DSP is a specialized microprocessor (Chip) , with its architecture optimized for the operational needs of digital signal processing, by filter or compress continuous the sound signal.
if I install a mod -sp- mcu file on my headunit, do I hear (get) a dsp sound quality? Not always, because it depends on the purchased head unit, is it equipped with a dsp chip? if not, then forget it. this is a simple explanation.
now what does an PRO Made sp mcu mod file do? exactly what this Eqfy does, filter or compress or adjusting the balance continuous of the sound signal (kind of a dsp) by refining and moving (cut off) the low mid and high sound tones into the right place and then forwarding them to the car speakers. again simply explained.
Click to expand...
Click to collapse
From your response, I dont think you understand. All MTCD units have hardware DSP w/EQ, read on.
The DSP in this case, is the EQ Your app is a software EQ, which applies to android only and still runs via the main EQ/Hardware EQ/DSP It wont work with the built in radio, only the hardware EQ will as is in the audio path.
If you want a free EQ, android/Software Only, Viper is probably a better and free choice.
So, DSP = Hardware EQ, controlled by software, your explanation "filter" seems to acknowledge that, but I dont think you quite understand how it works in these units. Also, the DSP in this unit does not perform compression. You also dont seem to understand that all of these MTCD units have a hardware DSP, most with 3-band parametric, some (optional module) with full 12-band EQ.
Perhaps you dont understand the differences between 12 band and parametric (3 band)? If your unit doesnt have the 12-band DSP, suggest a read of the hardware mod forum, which details how to install the 12 band as mod.
FYI, the Wadzio Mod enables the true 3 band functionality, removing the chinese 'faked' multiband EQ; the chinese faked is rubbish, hence the legacy hardware mod to enable true 3-band, and then the brilliant wadzio MOD, all done in software - no hardware mod required.
marchnz said:
From your response, I dont think you understand. All MTCD units have hardware DSP w/EQ, read on.
The DSP in this case, is the EQ Your app is a software EQ, which applies to android only and still runs via the main EQ/Hardware EQ/DSP It wont work with the built in radio, only the hardware EQ will as is in the audio path.
If you want a free EQ, android/Software Only, Viper is probably a better and free choice.
So, DSP = Hardware EQ, controlled by software, your explanation "filter" seems to acknowledge that, but I dont think you quite understand how it works in these units. Also, the DSP in this unit does not perform compression. You also dont seem to understand that all of these MTCD units have a hardware DSP, most with 3-band parametric, some (optional module) with full 12-band EQ.
Perhaps you dont understand the differences between 12 band and parametric (3 band)? If your unit doesnt have the 12-band DSP, suggest a read of the hardware mod forum, which details how to install the 12 band as mod.
FYI, the Wadzio Mod enables the true 3 band functionality, removing the chinese 'faked' multiband EQ; the chinese faked is rubbish, hence the legacy hardware mod to enable true 3-band, and then the brilliant wadzio MOD, all done in software - no hardware mod required.
Click to expand...
Click to collapse
First of all, I literally don't have any sentences to respond extensively back especially to 2+1 guys from now on on this forum from the past till now and it was just an apk that works perfectly with my own headunit + sounds much better on my car speakers without any use of mod or v4a things at all, oh don't give me any advice about any free apk etc becouse I have all of the most of them and the pro's one for years.. but anyway if someone like to talk to me about reall dsp and highend hifi matters my answer will be too honest as this:
Yes as you said, man like me whose bought a:
Yamaha DSP A1
+ Yamaha MX1
+ Alr Jordan take 5 / 5pieces speakers
+ Sony CDP-XA50ES
+ kimberly cinch highend pro cables
+ kimberly highend speakers wiring..
while some guys were living by them mothers or fathers and they took them walking to the school, has absolutely no clue about dsp chips and or extremely cheap chinese headunits with the so fake called dsp that cost only a few bucks, but "I" called just for fun a dsp that's all, and.. that is also the reason that why I sometimes blame myself enormously.. becouse of such replies!
http://www.audioreview.com/product/amplification/integrated-amplifiers/yamaha/dsp-a1.html
https://www.youtube.com/watch?v=a0dOT_mng68
http://www.audioreview.com/product/amplification/amplifiers/yamaha/mx-1.html
https://www.youtube.com/watch?v=N6z2znF2Aq0
http://www.audioreview.com/product/digital-sources/cd-players/sony/cdp-xa50es.html
https://www.youtube.com/watch?v=Hfut_F6PdlY
As I say one's it doesn't matter any more who's find or make or explain about a very nice wheel but what true does matter is can you buy it???
Seicane-Misery said:
Hi,
Really mate? haha.. https://play.google.com/store/search?q=Eqfy+Equalizer+v1.1.3+build+24.apk&c=apps
€2,99 the first one!
Click to expand...
Click to collapse
Oh i saw that but in description is says in specific it works with spotify thats why i asked.
marchnz said:
From your response, I dont think you understand. All MTCD units have hardware DSP w/EQ, read on.
The DSP in this case, is the EQ Your app is a software EQ, which applies to android only and still runs via the main EQ/Hardware EQ/DSP It wont work with the built in radio, only the hardware EQ will as is in the audio path.
If you want a free EQ, android/Software Only, Viper is probably a better and free choice.
So, DSP = Hardware EQ, controlled by software, your explanation "filter" seems to acknowledge that, but I dont think you quite understand how it works in these units. Also, the DSP in this unit does not perform compression. You also dont seem to understand that all of these MTCD units have a hardware DSP, most with 3-band parametric, some (optional module) with full 12-band EQ.
Perhaps you dont understand the differences between 12 band and parametric (3 band)? If your unit doesnt have the 12-band DSP, suggest a read of the hardware mod forum, which details how to install the 12 band as mod.
FYI, the Wadzio Mod enables the true 3 band functionality, removing the chinese 'faked' multiband EQ; the chinese faked is rubbish, hence the legacy hardware mod to enable true 3-band, and then the brilliant wadzio MOD, all done in software - no hardware mod required.
Click to expand...
Click to collapse
Aniway this stupid MTCD units still have dose horrible cracks and pops, no mather wath EQ your use
jerrymh said:
Aniway this stupid MTCD units still have dose horrible cracks and pops, no mather wath EQ your use
Click to expand...
Click to collapse
Hi,
I totally Agree with you mate, cheap thing is always wants to stay a cheap whatever you gonna try to make for or from it..
In the year 1990 I had a ford escort XR3i, I built an AA hi-fi system for almost more than 4000 (compare with €/$) into it, such as, Alpine with a remote control + Addison (later on) power amplifier + Boston speakers, and lots of things on my own without any helps from an car hifi shop, when (then) the Alpine only cost 1200 at that time!, the Addison 1700, so these chinese messes never come closely to any AA or AB class car headunits at all, but I am no longer younger than then, so such a chinese mess is a bit enough for my, I use mostly 90% the navi + listen to my old -gold- songs on the highway and to the traffic jam.. that's all.
Ps: the (entire) upgrade unit of this thing when I had a px3 (+/- 4years ago) they offered it to me for only €50 to buy it but still had opted for a newer px5 headunit at that time, so what to expected from such a chinese messes if you look at the price of its used components? indeed mate.
and the solder work of it is even worse and the bt of it or the wifi signal of it is too waek etc.. cheap is cheap mates.
@..ikerg,
Te recuperaré si tengo la oportunidad, luego te mostraré qué mierda de demora eres un mendigo.
Muy bajo nivel de hecho es que eres estupido.
Eqfy Equalizer v1.1.4.. just arrive..
Hi mates,
a newer version of: Eqfy Equalizer v1.1.4
with this Eqfy Equalizer you will hear the best sound ever from your existing car speakers, (only) in combination with an sp-mod mcu ofcourse, or similar mod, your musical songs notes will be heard from all directions in your nice car like a lovely singing birds in the early morning.. for sure.
Sp mcu mods: https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig .. take yours from there mate!
I'm absolutely very satisfied with it.. after trying so many of these fake so called Equ-loser things.
Success
Seicane-Misery said:
Hi mates,
a newer version of: Eqfy Equalizer v1.1.4
with this Eqfy Equalizer you will hear the best sound ever from your existing car speakers, (only) in combination with an sp-mod mcu ofcourse, or similar mod, your musical songs notes will be heard from all directions in your nice car like a lovely singing birds in the early morning.. for sure.
Sp mcu mods: https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig .. take yours from there mate!
I'm absolutely very satisfied with it.. after trying so many of these fake so called Equ-loser things.
Success
Click to expand...
Click to collapse
I love this! I gave it a try and it's AMAZEING!
Thank you!
So what I'm getting from this thread is that the defaults for this eq are better than most, but it does nothing that the proper eq and viper can't do better when configured properly.
Why you'd turn a true 3 band eq into a fake 10 band I don't know, software can't change the fundamentals of hardware, it's better to manipulate the 3 bands properly than have to manipulate 3 sliders for what is actually 1 band.
And before you get on a high horse about being an audiophile your contradicting yourself by purposefully degrading your ability to manipulate the equaliser. And this is coming from someone that runs Cambridge Audio and Monitor audio hardware at home, a dedicated 7.1 sound card in his computer , shure headphones and viper on my phone and a focal/alpine setup in his car....
Sent from my SM-G960F using Tapatalk
I'm guessing it has no effect on the sound quality coming from inbuilt apps like radio player, since it's playing directly through mcu and not through Android sound processing? Same as Viper.
Mr.R™ said:
So what I'm getting from this thread is that the defaults for this eq are better than most, but it does nothing that the proper eq and viper can't do better when configured properly.
Why you'd turn a true 3 band eq into a fake 10 band I don't know, software can't change the fundamentals of hardware, it's better to manipulate the 3 bands properly than have to manipulate 3 sliders for what is actually 1 band.
And before you get on a high horse about being an audiophile your contradicting yourself by purposefully degrading your ability to manipulate the equaliser. And this is coming from someone that runs Cambridge Audio and Monitor audio hardware at home, a dedicated 7.1 sound card in his computer , shure headphones and viper on my phone and a focal/alpine setup in his car....
Sent from my SM-G960F using Tapatalk
Click to expand...
Click to collapse
Well said, quite right. The OP was well noted for contradictory and often nonsense posts.
Seicane-Misery said:
Hi mates,
a newer version of: Eqfy Equalizer v1.1.4
with this Eqfy Equalizer you will hear the best sound ever from your existing car speakers, (only) in combination with an sp-mod mcu ofcourse, or similar mod, your musical songs notes will be heard from all directions in your nice car like a lovely singing birds in the early morning.. for sure.
Sp mcu mods: https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig .. take yours from there mate!
I'm absolutely very satisfied with it.. after trying so many of these fake so called Equ-loser things.
Success
Click to expand...
Click to collapse
How to make the Eqfy Equalizer to start automatically after a sleep? I tried the autostart application, and also the settings of the Eqfy Equalizer it self do nothing.
Tux2609 said:
I'm guessing it has no effect on the sound quality coming from inbuilt apps like radio player, since it's playing directly through mcu and not through Android sound processing?
Click to expand...
Click to collapse
Yes, me too I think the same ... I installed and nothing work
Version 1.1.4 is working without any problems for me.
Just the auto restart is not but im auto staring the app with tasker on every boot.
jerrymh said:
Aniway this stupid MTCD units still have dose horrible cracks and pops, no mather wath EQ your use
Click to expand...
Click to collapse
Buys a £200 radio that offers more functionality than every product on the market.
Complains about a little bit of borderline inaudible crackle....
Go buy a Pioneer mate, it'll sound great, cost a £500 and offer barely 20% of the functionality.
https://www.halfords.com/technology/car-audio/car-stereos/pioneer-sph-evo62dab-uni-car-stereo?cm_mmc=Google+PLA-_-Car+Audio-_-Car+Stereos-_-212902&istCompanyId=b8708c57-7a02-4cf6-b2c0-dc36b54a327e&istFeedId=62b447cf-331e-4fec-a47a-9985ff72d404&istItemId=wamwxrpix&istBid=tzwt&_$ja=tsid:94971|cid:1537736295|agid:61505028187|tid:aud-80976661069la-330869547031|crid:291898456049|nw:g|rnd:8133369828271058874|dvc:c|adp:1o5|mt:|loc:1007234&gclid=Cj0KCQjwjMfoBRDDARIsAMUjNZqE5p3oGpG0BPREsgopIfW4Q0wfpYymsJRK9L84RikkRQcSrl9AfmQaAjWBEALw_wcB
Enjoy.
---------- Post added at 01:55 PM ---------- Previous post was at 01:52 PM ----------
Mr.R™ said:
So what I'm getting from this thread is that the defaults for this eq are better than most, but it does nothing that the proper eq and viper can't do better when configured properly.
Why you'd turn a true 3 band eq into a fake 10 band I don't know, software can't change the fundamentals of hardware, it's better to manipulate the 3 bands properly than have to manipulate 3 sliders for what is actually 1 band.
And before you get on a high horse about being an audiophile your contradicting yourself by purposefully degrading your ability to manipulate the equaliser. And this is coming from someone that runs Cambridge Audio and Monitor audio hardware at home, a dedicated 7.1 sound card in his computer , shure headphones and viper on my phone and a focal/alpine setup in his car....
Sent from my SM-G960F using Tapatalk
Click to expand...
Click to collapse
Am I right in thinking the PX5 stuff has a true 8-10 band EQ that actually controls the hardware? Mine does and the finesse controls are very good in getting an excellent output.