my internet is not woking.in my university there is wifi for students.it does not work their.even tho i have full signal.even when i connected to my pc it doesn't work either.and my pc is conncted to internet 24/7.whenever i want to go to pIE it says can not find the address:check the name and try again.also for opera too.help me this lil brother guys.
be serious, change the thread title according to your matter..
double_ofour said:
be serious, change the thread title according to your matter..
Click to expand...
Click to collapse
Brother don u have a solution to my problem.
i had a similar problem. i was able to connect via wifi to my home network but IE would not work. I later found out that my PPC wasn't resolving hostnames, urls, etc.. with DNS. I ended up flashing a different ROM (WM6 ROM- [the real thing]) and it worked fine.
I suppose you could manually enter the DNS setting in your tcp/ip wifi settings. As to how to do this, search the forums.. i don't have instructions on that.. i'm sure someone has done it already somewhere in these threads and posts..
You should set connect "to the internet" something like that to the TCP/IP under the setting in the commanager
Probably a long shot with the lack of activity on this forum.
I have a cisco wifi access point on wpa-wpa2-tsk at work. It has a simple wpa key and no additional logins needed to connect.
Laptops and iphones connect fine to it with absolutely no problem.
However my desire connects but has 0 internet connectivity.
Any ideas on this? ive read alot of issues with getting through additional security authentications on other android devices but theres no further authentication or mac filtering on this hub yet theres no internet connevtivity.
Ive checked the Ips dns and gateways and it retrieves them all from the DCHP fine also.
Hoping anyone can shed some light - other wpa networks such as my home network work perfect - i dont have any access to this router config but as i said iphones work fine on it lol.
Thanks
Have you tried enabling "Best Wi-Fi performance" in the Advance settings within Wifi Settings?
indeed i have however i thought that was more of a signal power booster rather than anything else and the hub is on my desk and giving me a full signal (just no data connection).
Its funny the desire actualy holds the wifi conneciton at a greater distance than the iphone 4 yet cant access the internet rendering it useless lol.
i think this is a deep wifi driver issue.
wired
did you try change security level (eg only wpa, not wpa2 - or for testing: non)
My desireS works on wpa2 - but had problems with an win-phone in former times with wifi - and that helped...
Or did you lock any ports?
Tried to update the router-firmware? (that helped a friend with an iphone)
its a work router so unfortunatly i dont have that kind of access to it. I guess a firmware update or muddling about would work, but its frustrating that iphones connect fine and super duper android doesnt know what to do with it.
I dont expect a fix any time soon on this.
Here the same problem with using my desire on a speedtouch modem. Nothing worked I switched off the modem and turned it on again. It works very good now.
dbox2 said:
Here the same problem with using my desire on a speedtouch modem. Nothing worked I switched off the modem and turned it on again. It works very good now.
Click to expand...
Click to collapse
so is it working now on speedtouch? what did u do more than restarting the modem ? please
I have the same problem with my speedtouch and I did return the modem to Factory sittings. There was no passwords or anything, I did also disconnect all devices on the network and Nothing seems to work with me ( the same problem I got on 2.3 on my Desire HD) , so that give me a little hope in solving this problem by updating or downgrading
And Since no one manage to root the desire s (with s-on), that just leave no options for me right know :/
___
I did contact HTC care but still waiting their response
___
EDIT: HTC responded to my problem by simply asking my to "reboot the phone and trying again, if problem exists contact us again" .... Are they serious ??!!
I have a speedtouch modem also but no sucess with reseting it .
WiFi problem
Hi there,
I'm experiencing the same problems with my Speedtouch router at home while the routers at my office (Sitecom and some other brand) work fine.
Connection gets established, but no data will be transferred.
Before my update from Froyo to Gingerbread, all was fine...
Hope some solution will be found soon.
Regards,
Guys ..
I've just got one ( using speedtouch 585 )
what I did is:
1. connect to network, then go to the network sittings and use Fixed IP for the device u want
2. on the phone go to: sittings > wireless & N... > Wi-Fi settings > Advance
3. check " Use static IP " and fell in ur network infos
* IP address ( u can find it in your router or long-press to get ur network info from ur phone)
* Gateway : 192.168.1.254 ( I'm using this one from the link above " don't know way" )
* Netmask: 255.255.255.0
* DNS1 & DNS2 from ur ISP or u can find it in the router
4. Save then u can go online .. working so far everywhere including market and maps and should work with everything else
Hope it helped ( my original post HERE )
My problem again is that i cant connect to a second wireless router(no password needed for second router), the 1sth router its password protected (@ my work) ,then i come home and i cant connect because the IP from my work its not gone and theres no way to release/renew
I want to know if theres an app to emulate CMD like in windows (and not a computer needed to do it),i want to do it on my tf instead (dont tell me "turn off/on your router " please, i wont be asking on mcdonalds or burguer king if they can turn off/on their router )or any other place if they can do that so i can release my ip and get a new one
Thats what i want to avoid , so if theres some way to release /renew my ip (and no computer needed) then that will be great
I have revolver rom installed , but this PROBLEM was even on the stock rom ,so is not the rom or the 2 routers, my wifes ipod 4th gen connects right away and always renews ip at any place
Please help me
Thanks in advanced
jesesystem said:
I want to know if theres an app to emulate CMD like in windows (and not a computer needed to do it),i want to do it on my tf instead (dont tell me "turn off/on your router " please, i wont be asking on mcdonalds or burguer king if they can turn off/on their router )or any other place if they can do that so i can release my ip and get a new one
Click to expand...
Click to collapse
You can use terminal emulator for "CMD" window.
Just turning off your tablet will reset the wifi and it will scan for a new access point. Leaving the area of the AP at work should cause it to scan for a new one too. If you have hard coded a static IP address in your advanced wireless settings, pick up an app like WiFi Manager from the market to allow you to have multiple profiles and switch between them.
---------- Post added at 01:15 PM ---------- Previous post was at 01:13 PM ----------
gls9 said:
You can use terminal emulator.
Click to expand...
Click to collapse
Network settings require root to perform and there are nice apps that do point and tap to set it.
gls9 said:
You can use terminal emulator for "CMD" window.
Click to expand...
Click to collapse
Do you know how to release / renew ip with that program?
drowe said:
Just turning off your tablet will reset the wifi and it will scan for a new access point. Leaving the area of the AP at work should cause it to scan for a new one too. If you have hard coded a static IP address in your advanced wireless settings, pick up an app like WiFi Manager from the market to allow you to have multiple profiles and switch between them.
---------- Post added at 01:15 PM ---------- Previous post was at 01:13 PM ----------
Network settings require root to perform and there are nice apps that do point and tap to set it.
Click to expand...
Click to collapse
Both are DHCP enabled, so i dont know why it wont release it from previous routers , ive tried turning off/on both routers and tablet aswell and the problem persist.
With wifi manager i can make my TF to "release", or forget the las ip ?
Maybe I don't understand the problem, but can't you change wireless connections in the settings/wireless menu? Tap on the new connection?
sent from my cyanogen(mod) vision
gee one said:
Maybe I don't understand the problem, but can't you change wireless connections in the settings/wireless menu? Tap on the new connection?
sent from my cyanogen(mod) vision
Click to expand...
Click to collapse
i cant release the previous ip (my work , protected with password, dhcp enabled)
when i get home i have the last IP (from work), si i try to connect at my home router but i can see i have the ip form work, and theres no way i can release it to get a new onw from my home router.
i can acces my tf options to see what connections are on range and i can connect aswell, but the old ip form work wont dissapear and i cant acces internet or any other web content because i dont have a valid IP and there no way i can get rid of it
so i was asking if theres some way/app/etc etc to get the new ip working from my home router(not password protected)
but i think thats not the problem(open router), mi wifes ipod can connect everytime she gets home, its TF problem
If you need to get a new IP, turn on airplane mode, then turn it off. Simple as that. You're seriously overcomplicating this.
a.mcdear said:
If you need to get a new IP, turn on airplane mode, then turn it off. Simple as that. You're seriously overcomplicating this.
Click to expand...
Click to collapse
i have not tried that, i will take the TF to work today and se if that works
on a side note; im not overcomplicating anything, im trying to get help for something i dont know, im just a new TF user
thank you for the advice and i hope it works
Also, just in case, you may want to check that you don't accidentally have a static IP set on your device. Sometimes its easiest to avoid problems by simply deleting the network profile from your Transformer (or "forget" the network in Wifi Settings), and then attempt to re-connect again fresh.
a.mcdear said:
Also, just in case, you may want to check that you don't accidentally have a static IP set on your device. Sometimes its easiest to avoid problems by simply deleting the network profile from your Transformer (or "forget" the network in Wifi Settings), and then attempt to re-connect again fresh.
Click to expand...
Click to collapse
Its set to DHCP so i know thats not the problem, i guess the problem rely on the routers, maybe i need to add password to my home router and see if keep getting the same problem, but as i said before i will have problems on every open wireless network maybe
As alluded to, the work IP falls out of range and hunts for a new AP.
Do you have MAC filtering?
OT: Why do you have an open home net?
GasGuzz said:
As alluded to, the work IP falls out of range and hunts for a new AP.
Do you have MAC filtering?
OT: Why do you have an open home net?
Click to expand...
Click to collapse
i know it have to look for a new ip, but no its not doing it on my home network, thats why im having problems
as i said before, what am i gonna do when i try to connect to another open network ?? (ask them to turn off/on their routers , ask them to put password)
i dont know if this only happens with my router, i will try all the advices when i get home tonigth and see what happens
It’s (most probably) not the TF.
My work has both Open/Secured APs. It connects to the Secured as soon as it’s in range/awake, unless I manually hook it up to the Open. Same at Secured home, it connects no-mess/no-fuss.
How many Open nets do you ‘see’ at home?
GasGuzz said:
It’s (most probably) not the TF.
My work has both Open/Secured APs. It connects to the Secured as soon as it’s in range/awake, unless I manually hook it up to the Open. Same at Secured home, it connects no-mess/no-fuss.
How many Open nets do you ‘see’ at home?
Click to expand...
Click to collapse
just my network it's open, but my wifes ipod can connect/disconect as fast as you say with you network, it's just the TF not getting the new IP everytime i get home from work.
i was so freaking mad 2 days ago so i did a full wipe, that did the trick , i didnt have lot of apps that's why i did it , but i dont want to do it again and get all my apps lost one more time
nop !!!
none of the above advices worked , im so sorry for the guy saying i was overcomplicating this, and no , the airplane mode dindt solve it either
so i dont know wth can i do , the problem again is that i cant get a new IP, my last ip it's still not released (not even with airplane mode) , turnit off/on the device and tablet wont solve it either
i did the test with my wifes ipod (took it work then comeback)and it works as it should, just the TF doesnt work
so if i can do it with with terminal emulator (to release/renew IP) i will appreciate the step by step guyz
thanks in advanced
If you're using DHCP, under GNU/Linux the way is to launch the terminal emulator and run
Code:
dhclient -r
and then either restart the network interfaces (different between distros) or to run the DHCP client on the interface (in my tablets case, probably 'dhclient wlan0' without the quotes).
BUT!!! This being an Android tablet rather than a standard GNU/Linux system, has no dhclient program as far as I know. I have access to ifconfig, dhclient, etc by way of having Debian stable programs running in a chroot.
You might try disabling WiFi, forgetting the network, and reconnecting to it. The last router I had also had a way of getting rid of leases manually, either by telling it to tell the client to FO or deleting them all.
EDIT: Give or take specifics, I think the TF101 (or at least Prime) has dhcpcd. Try
Code:
dhcpcd -k wlan0
dhcpcd -n wlan0
to release and then renew. No promises if that will do jack though. You might also just try running 'dhcpcd wlan0' (without quotes).
For terminal emulators, go to the market or check if your ROM has one (Prime does).
Sent from my Transformer TF101 using Tapatalk
You really shouldn't have to go through any of this stuff. I'd say the system is borked, maybe the hardware, maybe the software. You could try flashing a new version or just take it back, show them you can't connect to their network and get a replacement. It really works as easily as we say and as easy as the wife's ipod. I would take it back or send it in for repair, I think you have a broken system.
Spidey01 said:
If you're using DHCP, under GNU/Linux the way is to launch the terminal emulator and run
Code:
dhclient -r
and then either restart the network interfaces (different between distros) or to run the DHCP client on the interface (in my tablets case, probably 'dhclient wlan0' without the quotes).
BUT!!! This being an Android tablet rather than a standard GNU/Linux system, has no dhclient program as far as I know. I have access to ifconfig, dhclient, etc by way of having Debian stable programs running in a chroot.
You might try disabling WiFi, forgetting the network, and reconnecting to it. The last router I had also had a way of getting rid of leases manually, either by telling it to tell the client to FO or deleting them all.
EDIT: Give or take specifics, I think the TF101 (or at least Prime) has dhcpcd. Try
Code:
dhcpcd -k wlan0
dhcpcd -n wlan0
to release and then renew. No promises if that will do jack though. You might also just try running 'dhcpcd wlan0' (without quotes).
For terminal emulators, go to the market or check if your ROM has one (Prime does).
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
with that code i get this
open_control : Permision denied
with dhclient -r i get this
dhclient : permision denied
im already rooted, my TF its the tf101
drowe said:
You really shouldn't have to go through any of this stuff. I'd say the system is borked, maybe the hardware, maybe the software. You could try flashing a new version or just take it back, show them you can't connect to their network and get a replacement. It really works as easily as we say and as easy as the wife's ipod. I would take it back or send it in for repair, I think you have a broken system.
Click to expand...
Click to collapse
well i cant do that , i bougth it from ebay , i dont think its the TF itself, maybe the router (but the ipod works :S )
i will try and see if it happens on some other open network, or just replace the modem