Hey there,
I was flashing a custom ROM to my Micromax Canvas Magnus device using the official TWRP app (because the recovery mode version was not working). I selected the file to flash but could not see any progress, so I took out the battery. When I inserted it again and turned the phone on, just a backlit screen shows up and switches off after a few seconds, and this process repeats endlessly. I've tried booting into recovery mode, but that has the same output.
I tried using ADB to flash the Stock ROM back, but the new device found tone plays in Windows and then the un[lugged hardware tone plays, and I can't get ADB to detect my device.
Any way I can get my device back?
ArnavR said:
Hey there,
I was flashing a custom ROM to my Micromax Canvas Magnus device using the official TWRP app (because the recovery mode version was not working). I selected the file to flash but could not see any progress, so I took out the battery. When I inserted it again and turned the phone on, just a backlit screen shows up and switches off after a few seconds, and this process repeats endlessly. I've tried booting into recovery mode, but that has the same output.
I tried using ADB to flash the Stock ROM back, but the new device found tone plays in Windows and then the un[lugged hardware tone plays, and I can't get ADB to detect my device.
Any way I can get my device back?
Click to expand...
Click to collapse
Yes you can...
Step 1: Download Sp flash tools n device firmware
Step 2: Install device driver and Vcom drivers(Especially Preloader vcom driver)
Step 3: Open sp flash tools as administrator
Step 4: click on scatter loading option and select scatter file
Step 5: From drop-down select firmware upgrade
Step 6: Click on download
Step 5: Connect phone via USB(battery removed)
could not find scatter files
:crying::crying::crying:
Related
Steps for flashing Recovery using SP Flash Tools:
Install drivers for your phone.
Open the SP Flash Tools(download from moulnisky.com or search in google).
In SP Flash Tools, Click on Scatter-Loading and select the MT6592_Android_scatter.txt
Check only recovery.img (select recovery.img by clicking on location corresponding to recovery in sp flash tool) and uncheck all others.
Switch off your phone.
Click the Download option
Connect your phone now. The Flash Tool will start the flashing process, the progress shown at the bottom with yellow progress bar. (Don't interrupt this process as it can potentially brick your device).
A green ring will appear showing that the process was successful.
Disconnect & Reboot your phone.
Note: Use Laptop for flashing to ensure uninterrupted power supply
Rooting
After flashing recovery, flash attached zip from recovery for root
At last i hav rooted my a300 :d
Worked Like CHARM HAppy Just missing is below touch buttons which is in CTR 6.0.4.4
how to enter in recovery
I am not able to install any zip in this recovery it says cant mount emcc or sd card wat to do?
recovery says
cant mount emmc or sd card
T26 version partition is different Please Help Same issue on all recovery
You will need TWRP recovery to root and also to flash custom roms on your kitkat Lenovo.
Code:
I am not responsible for any wrong processes done by you. If you point me for any harm caused, I will laugh at you. This procedure is tested by me and works perfectly. You should be free of tension ;)
DOWNLOADS:
VCOM drivers: Windows XP, Vista, 7
Windows 8 or up follow this procedure for installation.
TWRP_S660CN ↦ Contains recovery.img and android scatter file that needed to flash with flash tool, this only for CN firmware
TWRP_S660EU ↦ Contains recovery.img and android scatter file that needed to flash with flash tool, this only for EU firmware ROW version
SP Flash Tool v3.1328 ↦ Recommended using this version but there is a possibility that we must use the newest version.
PROCEDURE:
Download all required files, place it at same folder for easy organized it. Extract SP Flash Tool v3.1328 and TWRP_S660EU on the same folder. Make sure you already completely installing USB VCom driver before continued to next step.
Go to flash tool extracted folder and run Flash_Tool.exe, if you are using windows 7 or later please ensure that you running it using administrator privilege, on the flash tool check DA DL All with Checksum option. Now click on Scatter-Loading button and point it to TWRP_S660EU extracted folder and select MT6582_Android_scatter.txt, this will load recovery.img to flash tool.
Install TWRP 2.7.1.1 on Lenovo S660 Running Android 4.4.2
When finish with flash tool, now press Download button or hit F9. This will show pop up that told not all images loaded correctly, just click Yes button. And flash tool become stand by mode waiting connection from your device.
Install TWRP 2.7.1.1 on Lenovo S660 Running Android 4.4.2
Now turn off your device and remove the battery, connect your device with USB cable data to your computer, if USB VCom driver installed completely then flash tool will recognize your device and begin to start flashing process. This process only take 2-3 minutes and when you see GREEN CIRCLE in the middle of flash tool you save to disconnect your device
Install TWRP 2.7.1.1 on Lenovo S660 Running Android 4.4.2
Done, congratulation you already finish change your Lenovo Standard Recovery with custom recovery TWRP v2.7.1.1. confirm it with go to recovery mode turn off your device and then turn on with press and hold Power Button + Volume Up + Volume Down button until you can see TWRP v2.7.1.1 main menu.
Additional Courtesy: Andy Suwito and TWRP Devs
Rooting thread coming soon
HIT THE THANKS :good: BUTTON IF I HELPED U IN ANY WAY
It dosen't worked out.
It shows green circle . But when we go to recovery the same factory mode is opening there .
Nothing changed.....
I Recently Bought New Lenovo A7000 I was Trying To Install Twrp Recovery In Sp Flash Tool I Accidently Did Formatall+download It Deleted Every thing Including boot I Have Installed A Rom For My Phone All Mtk Drivers Are Installed Like Vcom,Mtk.
I Have Tried Again And Again But Flash Tool Cant Detect My Phone then I Restarted My Pc Remove Phone Battery And Reinstalled Again Then I Opened Sp Flash Tool using administer which Came With my rom i load my rom into spft, usb checkup and emmc checkup was ticked i dont know should i tick of untick i clicked download button unticking preloader and connected phone not detected 1st time not 2nd time not i have tried again and again i dont know which buttons should i press it detected my phone it installed everything but at 100 complete it shows error when checking da dl that error was like security secure usb dl failed i dont know what should i do i again connected it shows same error should i untick checkup Is my phone HARDBRICKED Any Fix Please Help?
Most lenovo phones have meta mode which is used to flash ROMs without preloader.so all you got to do is
1)get your stock ROM
2)load scatter.txt in sp flashtool
3)select either firmware upgrade/download only
4)click download and then connect your powered off phone via usb in meta mode
Note:connecting in meta mode is dffrt for dffrt phones.
Mine is holding vol+ button while connecting,find out how to connect your phone or try some button combinations.
My Lenovo A316i does not turn on anymore but can still be recognized by the computer. At first, my phone can be powered on but restarts at the logo. I made it worked using SP Flash Tool and I installed TWRP. The problem occured after I install an updated.zip folder through TWRP without Wiping. The phone at this stage was stocked at the logo. Then I tried the "Format all & Download" option in the SP Flash Tool. Now it does not turn on, but can still be recognized by the computer.
I already followed the steps from these videos
https://www.youtube.com/watch?v=A3TmXtOA0IA
https://www.youtube.com/watch?v=hKYH7gkvrvY
Try to flash with stock rom dude
I already did but it's still not working.
Are u able to go to TWRP recovery mode
No because it's not turning on anymore.
Try to use button combination for your phone model
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
jwoegerbauer said:
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
Click to expand...
Click to collapse
yes I did but still not working
ahmwwd said:
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Click to expand...
Click to collapse
Flash it using SP flash tool
mvikrant97 said:
Flash it using SP flash tool
Click to expand...
Click to collapse
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
ahmwwd said:
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
Click to expand...
Click to collapse
Please setup MTK drivers first and add filter using lib usb.