You will need TWRP recovery to root and also to flash custom roms on your kitkat Lenovo.
Code:
I am not responsible for any wrong processes done by you. If you point me for any harm caused, I will laugh at you. This procedure is tested by me and works perfectly. You should be free of tension ;)
DOWNLOADS:
VCOM drivers: Windows XP, Vista, 7
Windows 8 or up follow this procedure for installation.
TWRP_S660CN ↦ Contains recovery.img and android scatter file that needed to flash with flash tool, this only for CN firmware
TWRP_S660EU ↦ Contains recovery.img and android scatter file that needed to flash with flash tool, this only for EU firmware ROW version
SP Flash Tool v3.1328 ↦ Recommended using this version but there is a possibility that we must use the newest version.
PROCEDURE:
Download all required files, place it at same folder for easy organized it. Extract SP Flash Tool v3.1328 and TWRP_S660EU on the same folder. Make sure you already completely installing USB VCom driver before continued to next step.
Go to flash tool extracted folder and run Flash_Tool.exe, if you are using windows 7 or later please ensure that you running it using administrator privilege, on the flash tool check DA DL All with Checksum option. Now click on Scatter-Loading button and point it to TWRP_S660EU extracted folder and select MT6582_Android_scatter.txt, this will load recovery.img to flash tool.
Install TWRP 2.7.1.1 on Lenovo S660 Running Android 4.4.2
When finish with flash tool, now press Download button or hit F9. This will show pop up that told not all images loaded correctly, just click Yes button. And flash tool become stand by mode waiting connection from your device.
Install TWRP 2.7.1.1 on Lenovo S660 Running Android 4.4.2
Now turn off your device and remove the battery, connect your device with USB cable data to your computer, if USB VCom driver installed completely then flash tool will recognize your device and begin to start flashing process. This process only take 2-3 minutes and when you see GREEN CIRCLE in the middle of flash tool you save to disconnect your device
Install TWRP 2.7.1.1 on Lenovo S660 Running Android 4.4.2
Done, congratulation you already finish change your Lenovo Standard Recovery with custom recovery TWRP v2.7.1.1. confirm it with go to recovery mode turn off your device and then turn on with press and hold Power Button + Volume Up + Volume Down button until you can see TWRP v2.7.1.1 main menu.
Additional Courtesy: Andy Suwito and TWRP Devs
Rooting thread coming soon
HIT THE THANKS :good: BUTTON IF I HELPED U IN ANY WAY
It dosen't worked out.
It shows green circle . But when we go to recovery the same factory mode is opening there .
Nothing changed.....
Related
Steps for flashing Recovery using SP Flash Tools:
Install drivers for your phone.
Open the SP Flash Tools(download from moulnisky.com or search in google).
In SP Flash Tools, Click on Scatter-Loading and select the MT6592_Android_scatter.txt
Check only recovery.img (select recovery.img by clicking on location corresponding to recovery in sp flash tool) and uncheck all others.
Switch off your phone.
Click the Download option
Connect your phone now. The Flash Tool will start the flashing process, the progress shown at the bottom with yellow progress bar. (Don't interrupt this process as it can potentially brick your device).
A green ring will appear showing that the process was successful.
Disconnect & Reboot your phone.
Note: Use Laptop for flashing to ensure uninterrupted power supply
Rooting
After flashing recovery, flash attached zip from recovery for root
At last i hav rooted my a300 :d
Worked Like CHARM HAppy Just missing is below touch buttons which is in CTR 6.0.4.4
how to enter in recovery
I am not able to install any zip in this recovery it says cant mount emcc or sd card wat to do?
recovery says
cant mount emmc or sd card
T26 version partition is different Please Help Same issue on all recovery
Installing Clockworkmod Recovery on your Alcatel Onetouch Flash 6042D means that you will be able to flash new custom ROMs on it. Without custom recovery you cannot flash new ROMs. Also, it should be installed on rooted devices. Clockworkmod Recovery can also be used to backup your entire ROM.
WARNING: Installing a recovery may brick your phone...Don't Blame Me.. Do at your Own Risk...
Note:- Alcatel OneTouch Flash Recovery Uses a secured boot.img,so a custom recovery will cause boot loop..Please Download and Flash The unsecured boot.img from below link. And flash it with recovery..
You need:
1. A Windows PC
2. CWM recovery (Download)
3. Unsecured Boot.img (Download)
4. SP Flash tools (Download)
5. Driver (Download)
6. Scatter file (Download)
7.Alcatel Onetouch Flash 6042D
Follow these steps to flash custom recovery using sp flash tools:
Step 1: Extract/unzip all downloaded files.
Step 2: Open SP flash tool and load scatter file.
Step 3: Unselect all blocks and select only RECOVERY and BOOT.
Step 4: Click the location column of RECOVERY and BOOT and select downloaded
recovery and boot.
Step 5: Press and Volume Down + Power to Enter in CWM Recovery Mode.
If you face any problem contact me at facebook.....:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Biman94 said:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Click to expand...
Click to collapse
Thanks for your review...
i am currently working on AICP ROM 5.1.1..
I will upload it within 2 days...
Be Tuned....:highfive: :highfive: :highfive:
Okkk
I am waiting for it...
connecting in sp flash & mtk droid tools.
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Solution of your problem....
pinakini said:
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Click to expand...
Click to collapse
I recomend u to go to this link to solve your Spft problem...
and i think u must download your stock rom instead of making backup...
after this problem solved try to flash unsecured boot.img first..
then u can try flashing My CWM recovery or Philz Recovery
(philz recovery can be found here...)
and got to this link
you can understand what is your problem connecting in mtk driod tool...
I think u must flash it.. because its the problem of your phone...
and if u face any problem contact me or for instant help just take the help of Google BABA!!!...
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
pinakini said:
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
Click to expand...
Click to collapse
Here Check This Website......
After that I hope U can Understand your problem.....
Then Uninstall any previous driver installed of your phone on your pc....
then install the driver mention above....
and after that if the problem remains try to download and install proper adb driver by this....
Hey there,
I was flashing a custom ROM to my Micromax Canvas Magnus device using the official TWRP app (because the recovery mode version was not working). I selected the file to flash but could not see any progress, so I took out the battery. When I inserted it again and turned the phone on, just a backlit screen shows up and switches off after a few seconds, and this process repeats endlessly. I've tried booting into recovery mode, but that has the same output.
I tried using ADB to flash the Stock ROM back, but the new device found tone plays in Windows and then the un[lugged hardware tone plays, and I can't get ADB to detect my device.
Any way I can get my device back?
ArnavR said:
Hey there,
I was flashing a custom ROM to my Micromax Canvas Magnus device using the official TWRP app (because the recovery mode version was not working). I selected the file to flash but could not see any progress, so I took out the battery. When I inserted it again and turned the phone on, just a backlit screen shows up and switches off after a few seconds, and this process repeats endlessly. I've tried booting into recovery mode, but that has the same output.
I tried using ADB to flash the Stock ROM back, but the new device found tone plays in Windows and then the un[lugged hardware tone plays, and I can't get ADB to detect my device.
Any way I can get my device back?
Click to expand...
Click to collapse
Yes you can...
Step 1: Download Sp flash tools n device firmware
Step 2: Install device driver and Vcom drivers(Especially Preloader vcom driver)
Step 3: Open sp flash tools as administrator
Step 4: click on scatter loading option and select scatter file
Step 5: From drop-down select firmware upgrade
Step 6: Click on download
Step 5: Connect phone via USB(battery removed)
could not find scatter files
:crying::crying::crying:
Hi there!
Because lack of the development at this device. I try to make a little work for this infamous device.
This is a custom recovery for Infinix Zero 4 based on PhilZ Touch Recovery version 6.59.0. You can use this recovery to flash custom ROMs, root using Magisk or SuperSU and other flashable ZIPs.
[Really] Important - read before flashing
I am not responsible for anything that goes wrong. You are agreed to flash this recovery that will break XOS OTA update, lose warranty and may break your device.
However, I've included stock recovery if you change your mind and want to back to original one.
Instructions:
1. Go to Settings, About Phone, and then tap Software version 10 times. It should now say that you are a developer.
2. Go to Settings, Developer Options. Turn on USB Debugging and Enable OEM Unlock.
3. Install MTK Preloader USB driver, skip if you've already installed this one.
4. Extract PhilZ recovery zip file, and extract
5. Turn off your device.
6. Open SP Flash Tools, locate scatter file to your downloaded zip recovery.
7. Click download, and press VOL DOWN on your device.
8. Turn on your device, press POWER and VOL UP.
9. Your custom recovery has been installed.
Back To Stock
If you decided change your mind by restore stock recovery for reasons such as want to keep your warranty, continue receive OTA update and maybe want to be back on the track, I've also provided stock recovery both Nougat and Marshmallow version.
Download links
PhilZ Touch Recovery
SP Flash Tools
MTK Preloader USB Driver
Stock Recovery (Marshmallow version)
Stock Recovery (Nougat version)
Credit and Thanks
Credit to @Phil3759 for awesome custom recovery
Thanks to Infinix, Mediatek, and you
Reserved
Reserved
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
dayat7man said:
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
Click to expand...
Click to collapse
because the boot isn't patched. you can use Magisk to patch your boot.img and flash it again and it will work.
you can get your boot.img either from your stock ROM where is available at infinixmobility.com or you can use miracle box to extract it from your current installed ROM
Hi!
I get a Vodafone_Smart_Turbo_7_VFD500, mt6735m board platform phone bricked and was very dificult to find a working rom, there are a few that boot but after locking the phone screen goes mad...
I fixed a RR rom, still not perfect but is better.
One kwon issue is charging with phone off, screen stays white and on...
I Let here a link with:
SP_Flash_Tool_v5.1916_Win
SP_USB_Win7_Drivers ( Copy to Desktop and execute the shortcut)
Vodafone_Smart_Turbo_7_VFD500_MT6735M_V2.39.1_21122016_6.0 ROM to flash with SP Tool
open_gapps-arm-7.1-nano-20191029.zip
RR-N-v5.8.5-PIXI4_5_4G.zip (Fixed) Rom
TWRP3.0.2-0_VDF500.img Recovey (Use SP Tool with MT6735M_Android_scatter.txt from Vodafone ROM to flash it)
To use SP tool, first install the drivers then open SP tool, search for MT6735M_Android_scatter.txt file. To install full Vodafone ROM click in Download only and select Format All + Download then Download key above and plug USB, to install TWRP unselect all and only select recovery and click in location field, search for TWRP, click in download from above and plug USB ( If faild with error you need to flash all Vodafone ROM first).
After all this, use TWRP to flash RR Rom then Gapps.
Mega.nz Link
I hope this helps you to!!!