Hi there,
I am looking for some working kernel.
After flashing CM13 i experinced problem with charging - it wouldnt charge neither while turned on nor turned off.
Then I went for Xceed kernel which is supposed to work with another build. As a result camera not working, wifi inactive and any attempt to uninstall app ends with reboot.
Please link some kernel i could flash to CM13 or suggest another ROM + kernel setup to make the system stable and functional.
Cheers,
W
Simply flash the CM ROM back. It'll install the original stock kernel
U can try this one. Should work for you:
vk.com/doc189068105_440716201
It's from:
www.teamsuperluminal.org/mi4c-cyanogenmod-13/
Related
I recently rooted my galaxy sl using amit bagaria's universal cf root. After rebooting, the wifi wasn't switching on (it gave me an error message). So I googled it an found a solution. I flashed the bam kernel v14 (google it) and the wifi is working properly. Now, apparently the bam kernel v14 is not compatible with cm and i cannot flash any cm rom. Is that how it is supposed to be? How can i fix this? Thanks for all the help
rohit_6 said:
I recently rooted my galaxy sl using amit bagaria's universal cf root. After rebooting, the wifi wasn't switching on (it gave me an error message). So I googled it an found a solution. I flashed the bam kernel v14 (google it) and the wifi is working properly. Now, apparently the bam kernel v14 is not compatible with cm and i cannot flash any cm rom. Is that how it is supposed to be? How can i fix this? Thanks for all the help
Click to expand...
Click to collapse
The wifi problem is because you were on a value pack for 2.3.6, and if you root the device you can't use wifi unles you use bam kernel.
About CM, every ROM includes it's own kernel, so if you flash Dhiru's CM10 for example, this will come with it's own kernel and will install it automatically when you install the ROM. There are kernels for each Rom, so beware when you install a kernel on your Rom, first check if it's compatible. I think that's what you read about bam kernel, that is only compatible with Gingerbread.
PS: Please be more specific on the title next time
salaesp said:
The wifi problem is because you were on a value pack for 2.3.6, and if you root the device you can't use wifi unles you use bam kernel.
About CM, every ROM includes it's own kernel, so if you flash Dhiru's CM10 for example, this will come with it's own kernel and will install it automatically when you install the ROM. There are kernels for each Rom, so beware when you install a kernel on your Rom, first check if it's compatible. I think that's what you read about bam kernel, that is only compatible with Gingerbread.
PS: Please be more specific on the title next time
Click to expand...
Click to collapse
Alright.....now for example I want to flash Dhiru's CM10, how do I go about doing it? The normal way....with Odin? Just flash it PDA??
rohit_6 said:
Alright.....now for example I want to flash Dhiru's CM10, how do I go about doing it? The normal way....with Odin? Just flash it PDA??
Click to expand...
Click to collapse
No, you have to flash it using CWM. Please follow the installation instructions given in CM10 from dhiru:
http://forum.xda-developers.com/showthread.php?t=1868074
You are on stock rom, so follow the stock rom steps. You can skip the root step if you already rooted it.
As an advice, I suggest you make a /efs folder backup. This folder from your phone keeps a lot of information about it. I had some problems with 3g and stuff, and recovering it helped me. Before doing anything please read some threads about flashing this device.
Good luck!
Hi
I'm using phantom kernel with OmniRom alpha 2.
When I try to turn on wi-fi, my phone crashes and doesn't turn on again (so I need to flash the custom ROM).
In other words, I can't use any 4.4 ROM (AOSPA or OmniRom) cause the wi-fi crashes. But I still want that ROM.
setnof said:
Hi
I'm using phantom kernel with OmniRom alpha 2.
When I try to turn on wi-fi, my phone crashes and doesn't turn on again (so I need to flash the custom ROM).
In other words, I can't use any 4.4 ROM (AOSPA or OmniRom) cause the wi-fi crashes. But I still want that ROM.
Click to expand...
Click to collapse
what version of phantom?
I am using both OMNI Rom and my kernel together and I don't find any problem whatsoever. Always do clean install before flashing.
Hello!
Firstly my wi-fi died. (could not connect to the internet, or even get IP adress)[same with bluetooth]
Then I reflashed another ROM, everything went good but day by day again wi-fi is dead.
__________________________
I checked stock rom, and It seems to be ok.
Step by step I :
-flash stock w/ flashtool;
-fastboot kernel w/ flashtool;
-flash phantom/thunderzap with that kernel;
-dirty flash or flash custom rom;
And wi-fi can not even turn on. Why?
So much blue screens occur.
I don't know what to do.
___________________________
P.S. Stock works fine.
edit. Flashed new .ftf and Carbon ROM. Wifi works but LED/flash light/brightness not working.
Hristmas said:
Hello!
Firstly my wi-fi died. (could not connect to the internet, or even get IP adress)[same with bluetooth]
Then I reflashed another ROM, everything went good but day by day again wi-fi is dead.
__________________________
I checked stock rom, and It seems to be ok.
Step by step I :
-flash stock w/ flashtool;
-fastboot kernel w/ flashtool;
-flash phantom/thunderzap with that kernel;
-dirty flash or flash custom rom;
And wi-fi can not even turn on. Why?
So much blue screens occur.
I don't know what to do.
___________________________
P.S. Stock works fine.
edit. Flashed new .ftf and Carbon ROM. Wifi works but LED/flash light/brightness not working.
Click to expand...
Click to collapse
You need to flash kernel zip again after flashing rom. By kernel zip I mean the zip file that contains boot.img. It contains all the modules that you need for a working wifi.
Also, most roms require a clean flash and not dirty flash. You should check that with the rom though.
Do this:
First flash a custom kernel.
Then flash your rom using the recovery in that kernel.
Then flash the kernel zip(that I told you above). I'm sure your wifi will start working if you follow these steps carefully.
I again suggest a clean install instead a dirty one.
Hope it helps.
Hit thanks if it does.
abhi007.john said:
You need to flash kernel zip again after flashing rom. By kernel zip I mean the zip file that contains boot.img. It contains all the modules that you need for a working wifi.
Also, most roms require a clean flash and not dirty flash. You should check that with the rom though.
Do this:
First flash a custom kernel.
Then flash your rom using the recovery in that kernel.
Then flash the kernel zip(that I told you above). I'm sure your wifi will start working if you follow these steps carefully.
I again suggest a clean install instead a dirty one.
Hope it helps.
Hit thanks if it does.
Click to expand...
Click to collapse
I edited my post, just problem with my .ftf. I don't know why but I downloaded it one more time and everything is all right now.
Second problem was LED and other lights... It's rom (Carbon) problem, waiting for fix. Staying on Omni rom for now.
Hey peeps, I'm running slapnuts v1.4 rom on a d2vzw gs3 vrucml1 baseband. The rom is supposed to be running with Lean Kernel v4.0 but for some reason I am stuck with the stock kernel. I have also tried flashing Lean Kernel by itself but with no success, actually whenever I flash it I just end up losing wifi and having to flash the ml1 modules back. I could use some help here, thanks!
Another thing that I could use some clarification on, Safestrap directs users to install the kernel modules after flashing a rom (otherwise we would be without working wifi). The problem I'm seeing here though is whenever a kernel is flashed, wifi is no longer working, in other words, the module is gone and has to be re-flashed which I am assuming (only because I've been unable to get a kernel up and running) would remove the kernel all over again and visa versa.
Am I just doing something wrong or does it seem that something is broken here?
Yeorgaki said:
Hey peeps, I'm running slapnuts v1.4 rom on a d2vzw gs3 vrucml1 baseband. The rom is supposed to be running with Lean Kernel v4.0 but for some reason I am stuck with the stock kernel. I have also tried flashing Lean Kernel by itself but with no success, actually whenever I flash it I just end up losing wifi and having to flash the ml1 modules back. I could use some help here, thanks!
Another thing that I could use some clarification on, Safestrap directs users to install the kernel modules after flashing a rom (otherwise we would be without working wifi). The problem I'm seeing here though is whenever a kernel is flashed, wifi is no longer working, in other words, the module is gone and has to be re-flashed which I am assuming (only because I've been unable to get a kernel up and running) would remove the kernel all over again and visa versa.
Am I just doing something wrong or does it seem that something is broken here?
Click to expand...
Click to collapse
You cannot flash a custom kernel on TouchWiz 4.3+. You must use the stock kernel. That's the way that Safestrap works on the S3 given the limitations created by Samsung.
Sent from my SCH-I535 using Tapatalk
I have a 6x phone (hi6250 hl40 version).
I retryed compire kernel from source before,for run frida(because default kernel not enable "PTRACE" ).
It running well ,just wifi not work.
Today I want retry again
I compired kernel from a diferent source
After flash kernel ,my phone even can't boot into bootloader.
Is any way to solve it without wipe data?
Thanks
solution here
Bro, could you please upload the flashed kernel? I tried several days but all failed. I really need this. Thanks!