Database Info

[Q] Black Screen Reboot on CM 10.1 JBX 0.7 & 0.8

Hello my friends,
I have that problem, every time that I reboot the phone, it pass BMM 3 second, and then stop on black screen whit the green led and the white buttons on. The only solution it's take off the battery many times, until 5 or 6 times, and then in on the CM . I was flash many CM versions, with kexec kernells from 0.6 to 0.8, and all of them have the same problem. I always do all wipes, data and cache, and many times back to stock room, and flash again cm , thinking that a pure stock fix the problem, but nothing, all times in system 1.
Please there is a solution for this problem, that i don't know, because is a big problem take off the battery always. And because too the rapid reboot don't work in this case.
Thanks in advance.

elgeorge_rp said:
Hello my friends,
I have that problem, every time that I reboot the phone, it pass BMM 3 second, and then stop on black screen whit the green led and the white buttons on. The only solution it's take off the battery many times, until 5 or 6 times, and then in on the CM . I was flash many CM versions, with kexec kernells from 0.6 to 0.8, and all of them have the same problem. I always do all wipes, data and cache, and many times back to stock room, and flash again cm , thinking that a pure stock fix the problem, but nothing, all times in system 1.
Please there is a solution for this problem, that i don't know, because is a big problem take off the battery always. And because too the rapid reboot don't work in this case.
Thanks in advance.
Click to expand...
Click to collapse
You might be a kexec reject....But are you flashing CM on system 1 or 3 onwards ??
Have you been able to flash any kexec based ROM's before??
JBX kernel should solve your problem......

darth_nihar said:
You might be a kexec reject....But are you flashing CM on system 1 or 3 onwards ??
Have you been able to flash any kexec based ROM's before??
JBX kernel should solve your problem......
Click to expand...
Click to collapse
1. Yes, I flashed CM on system 1 and 3, and the problem is the same.
2. Yes, I flashed other Kexec rooms but when the developers used Wangg Kernel, Ravikrang kernel and Hashcode Kernel, but any JBX kernel works for me , always black screen after reboot.
I have 2 questions,
A. Is there any file zip of Ravikrang kernel for BMM??
B. What is kexec reject? Do you have that problem? How you flash your rooms?

elgeorge_rp said:
1. Yes, I flashed CM on system 1 and 3, and the problem is the same.
2. Yes, I flashed other Kexec rooms but when the developers used Wangg Kernel, Ravikrang kernel and Hashcode Kernel, but any JBX kernel works for me , always black screen after reboot.
I have 2 questions,
A. Is there any file zip of Ravikrang kernel for BMM??
B. What is kexec reject? Do you have that problem? How you flash your rooms?
Click to expand...
Click to collapse
No there isn't a zip file for ravi's kernel if you flash any of his ROM's the kernel is built into it.......
Plain and simple kexec reject is when you boot your ROM which is kexec based and are stuck with a black screen......
Try flashing PA RC2 and use JBX u should be able to boot it .......

[Q&A] [MOD] MultiROM v28d

Q&A for [MOD] MultiROM v28d
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

My stock rom is not booting anymore. just black screen for more than 1 minute...

Installing multirom through the app
Hi guys, I've used the whole morning to read through all 100+ pages today. Now i'm back home and i'm ready to install this. But then I found out on the OP that it states that "You can install it either from MultiROM Manager app or from this guide".
Now im wondering if it means that i could just install the app through google play and its done? So i do not need to go through flashing it through recovery, modify recovery? just patching the kernel?
EDIT: i think i actually did it successfully already. Thanks for the great work 1

My personal cm11 builds, using no modifications won't boot using multi boot. Do I need to include something extra?

You need to use a patched kernels like ak kernels
Sent from my A0001 using XDA Free mobile app

chak29 said:
You need to use a patched kernels like ak kernels
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Even if it's secondary rom?

The internal ROM needs the patched kernel.. The secondary ROM don't need. But not all the ROMs works with multirom..I use cm11s38r with ak patched kernel(make sure you get the right kernel) for the internal. Secondary I use mahdi and liquids works fine both stock kernel...
Sent from my A0001 using XDA Free mobile app

Guys if I install multirom. Will I be able to have whatsapp in every rom? Or I should verify always the number?

tapyon said:
Guys if I install multirom. Will I be able to have whatsapp in every rom? Or I should verify always the number?
Click to expand...
Click to collapse
As Whatsapp verifies your device (and rom) you'll have to verify your number every time you boot into another rom!
WhatsApp won't synchronise all your messages. (I'm pretty sure, the ones you wrote won't show up)
Edit:
Die anyone managed to install Dirty Unicorns as a secondary rom? Mine doesn't boot :/

Ok so i've run into some alarming problem (by alarming i mean that i haven't found i solution and that i can't boot)
So after I rooted my phone (TWRP installed) i decided to install multirom, i folowed the procedure. Custom TWRP is installed and running, the boot menu is working perfectly, and i havce the custom kernel, only problem is, i haven't any secondary rom installed, and i can't boot to primary (black screen for 2-3 minute then reload multirom boot menu)
Does any one have any idea of what i can do to try to fix this ?
ETA: I managed to boot to main rom again by flashing CM11s from the OPO toolbox, device ended up not rotted and iv'e got Cyanorecovery (default one) and default kernel.
After some test i'm sure the kernel is the source of the problem, i can easly get the recovery but everytime i try to install the kernel the phone won't boot or bootloop.
So essentially the kernel downloaded from the app doesn't seem to cooperate

CountDooku said:
As Whatsapp verifies your device (and rom) you'll have to verify your number every time you boot into another rom!
WhatsApp won't synchronise all your messages. (I'm pretty sure, the ones you wrote won't show up)
Edit:
Die anyone managed to install Dirty Unicorns as a secondary rom? Mine doesn't boot :/
Click to expand...
Click to collapse
I found a one way to do it. Titanium Backup ^^
Copy >>> restore in the new rom and u have whatsapp working in two roms.

Hey I'm trying to flash ak on my 3rd ROM but keep getting binary could not update from zip error? ... Any help with this

I tried to flash liquidsmooth as secondary ROM. But then com.android.gsf.login seems to be not working.
Anyone else facing this problem? Tia

Android L only work as internal ROM. I tired many combinations. Always ended up boot loop.
Sent from my A0001 using XDA Free mobile app

Multirom work fine with Lolipop
I just flash Lolipop on my opo and it work fine, but if i flash it in secondary it cannot work.. So first I flash it as secondary, after complete of flashing I swap the internal ROM with the L ROM.. After L ROM become internal ROM I wipe it again then I flash all the file again.. Then it work fine, even I change the L ROM to secondary it work fine.. but my primary ROM cannot boot.. So for my primary ROM I will reset it back and flash the ROM back to see how it goes then..

cyanogen don't boot anymore
hello, thanks for the awesome work, i'm having an issue with cm (on my oneplus one) the other roms boot and works fine; but cm stay stuck on a black screen (i made cm updates :s) i already tried to flash kernel again but i doesn't work; an idea to fix this ?

Multirom and L
Having some difficulty getting Multirom to run an L ROM. When I install an L ROM as secondary and try to Boot, I get a bootloop. Then when I try to boot any of my other secondaries, they get stuck on the boot image after trying to boot L. I have to reflash the existing secondaries to get them to work. The Primary is never affected, it boots fine. I am running CM11s as primary with the AK.010.OPO.CM12 kernel. I have updated TWRP to the 20141116 version. The L version is bpear96's 11/16. Any help would be appreciated!

Yellowish screen
Hi, I just installed multirom on stock rooted rom and after reboot my screen became yellowish. I think it's a patched kernel problem. Anyone has got a solution?

Is it possible to have mahdi as primary rom and cm11s as secondary, and vice versa?
Sent from my iPhone using Tapatalk till i get my Bacon

Hello, I have cm11s 44s with stock kernel. If i want cm12 as secondary I have to flash cm12 kernel in multirom app?

[Q] My Nuxes 5 does not work after flash the franco kernel, help please

Dears,
I have nexus 5 with open bootloader + Recovery clockwork-6.0.4.4 + root + MIUI V5 custom Rom
because the lag and the hate of my phone especially when Turn on 3G data, I decided to change the kernel to custom kernel
then I used the franco kernel r63 from this post
http://forum.xda-developers.com/google-nexus-5/orig-development/kernel-franco-kernel-r53-t2508284
I used the "franco.Kernel updater Free App" to download the latest update and flash it
but after that the nuxes 5 didn't work, still stock on the logo of Rom !!
I tried to install the stock kernel from this link boot-4.4.1 by "fastboot flash boot" command but still same problem
and also I tried to install the Trinity Kernel "T5-4.4.2-B10" by flashboot command and still same problem,
and tried to re flash the Zip file of MUIU Rom, but nothing new, same problem stock on the logo picture of Rom when start !
any help please ?
I want to install the franco kernel with my MIUI Rom, even if the solution will remove all my App & data no problem !

none of those kernels are miui compatible. what you have to do is either flash the miui kernel(or compatible) or just reflash miui dirty(don't wipe anything).

Or just flash away from MIUI to get rid of your lag problem.

simms22 said:
none of those kernels are miui compatible. what you have to do is either flash the miui kernel(or compatible) or just reflash miui dirty(don't wipe anything).
Click to expand...
Click to collapse
simms22
Many thanks for you, I change the kernel and used this "Silean Kernel Nexus 5", which is compatible with MIUI rom, and My Nexus 5 go a way from last problem ! Thanks again. :good:

SilkyJohnson said:
Or just flash away from MIUI to get rid of your lag problem.
Click to expand...
Click to collapse
Thanks for your Idea, this is my first time with this rom and I found it Good if the new kernel will solve these two problems ! I hope or I will get new Rom ! do you recommend any new good Rom ?!

Nuxes 5
Sent from my Nexus 5

[Q] Sch-i535 [ml1] Unable to get custom kernel flashed properly

Hey peeps, I'm running slapnuts v1.4 rom on a d2vzw gs3 vrucml1 baseband. The rom is supposed to be running with Lean Kernel v4.0 but for some reason I am stuck with the stock kernel. I have also tried flashing Lean Kernel by itself but with no success, actually whenever I flash it I just end up losing wifi and having to flash the ml1 modules back. I could use some help here, thanks!
Another thing that I could use some clarification on, Safestrap directs users to install the kernel modules after flashing a rom (otherwise we would be without working wifi). The problem I'm seeing here though is whenever a kernel is flashed, wifi is no longer working, in other words, the module is gone and has to be re-flashed which I am assuming (only because I've been unable to get a kernel up and running) would remove the kernel all over again and visa versa.
Am I just doing something wrong or does it seem that something is broken here?

Yeorgaki said:
Hey peeps, I'm running slapnuts v1.4 rom on a d2vzw gs3 vrucml1 baseband. The rom is supposed to be running with Lean Kernel v4.0 but for some reason I am stuck with the stock kernel. I have also tried flashing Lean Kernel by itself but with no success, actually whenever I flash it I just end up losing wifi and having to flash the ml1 modules back. I could use some help here, thanks!
Another thing that I could use some clarification on, Safestrap directs users to install the kernel modules after flashing a rom (otherwise we would be without working wifi). The problem I'm seeing here though is whenever a kernel is flashed, wifi is no longer working, in other words, the module is gone and has to be re-flashed which I am assuming (only because I've been unable to get a kernel up and running) would remove the kernel all over again and visa versa.
Am I just doing something wrong or does it seem that something is broken here?
Click to expand...
Click to collapse
You cannot flash a custom kernel on TouchWiz 4.3+. You must use the stock kernel. That's the way that Safestrap works on the S3 given the limitations created by Samsung.
Sent from my SCH-I535 using Tapatalk

Stock or custom kernel required for CM13 Teamsuperluminal

Hi there,
I am looking for some working kernel.
After flashing CM13 i experinced problem with charging - it wouldnt charge neither while turned on nor turned off.
Then I went for Xceed kernel which is supposed to work with another build. As a result camera not working, wifi inactive and any attempt to uninstall app ends with reboot.
Please link some kernel i could flash to CM13 or suggest another ROM + kernel setup to make the system stable and functional.
Cheers,
W

Simply flash the CM ROM back. It'll install the original stock kernel

U can try this one. Should work for you:
vk.com/doc189068105_440716201
It's from:
www.teamsuperluminal.org/mi4c-cyanogenmod-13/