I have a 6x phone (hi6250 hl40 version).
I retryed compire kernel from source before,for run frida(because default kernel not enable "PTRACE" ).
It running well ,just wifi not work.
Today I want retry again
I compired kernel from a diferent source
After flash kernel ,my phone even can't boot into bootloader.
Is any way to solve it without wipe data?
Thanks
solution here
Bro, could you please upload the flashed kernel? I tried several days but all failed. I really need this. Thanks!
Related
Hey everyone,
I just rooted my WT19i and unlocked bootloader. Because I'm absolutely new in custom ROMs I need your advice helping me to decide which of them I should install on my device. Which is the best?
BTW I already tried installing CM9 using ROM manager, but it said "Installing update..." , then the device rebooted ant stuck on "Sony Ericsson" logo... I had to flash firmware and root my phone again...
Maceee said:
Hey everyone,
I just rooted my WT19i and unlocked bootloader. Because I'm absolutely new in custom ROMs I need your advice helping me to decide which of them I should install on my device. Which is the best?
BTW I already tried installing CM9 using ROM manager, but it said "Installing update..." , then the device rebooted ant stuck on "Sony Ericsson" logo... I had to flash firmware and root my phone again...
Click to expand...
Click to collapse
ROMs for this phone are buggy if you want one with all features working even walkman button try Hibroman (just ask for a link to download)
if you have unlocked bootloader you can see kernels like rage kernel with cpu governors this will increase/improve battery !
It's better to use phone-specific methods for flashing than ROM Manager (some got trouble by this way)
when flashing a ROM that requests to change bootloader be sure to flash it using a laptop on battery -it's better to protect from power problems if something is wrong when flashing bootloader your phone is bricked and only service tools can revive it !
never flash ROMs/ kernels not made for your phone -you are to experiment a hardware failure !
ruscan.calin said:
ROMs for this phone are buggy if you want one with all features working even walkman button try Hibroman (just ask for a link to download)
if you have unlocked bootloader you can see kernels like rage kernel with cpu governors this will increase/improve battery !
It's better to use phone-specific methods for flashing than ROM Manager (some got trouble by this way)
when flashing a ROM that requests to change bootloader be sure to flash it using a laptop on battery -it's better to protect from power problems if something is wrong when flashing bootloader your phone is bricked and only service tools can revive it !
never flash ROMs/ kernels not made for your phone -you are to experiment a hardware failure !
Click to expand...
Click to collapse
Thanks! I guess I'll try installing this ROM and kernel when I have enough time. And two more questions: if I flashed another firmware my bootloader will be locked again and which version of Hybroman should I use?
Maceee said:
Thanks! I guess I'll try installing this ROM and kernel when I have enough time. And two more questions: if I flashed another firmware my bootloader will be locked again and which version of Hybroman should I use?
Click to expand...
Click to collapse
nope your bootloader is not touched by flashing a custom ROM
indeed in some cases you have to flash separately a different bootloader so you can use that custom rom (in fact the problem is that bootloader will not give a chance to that kernel to load into memory -it's about a kind of protection)
wich version ? well as you see that thread is a very long one (and that's a sign of a good one ..) but no links in first post but just ask them your question and you get a link surely
try real ics 5.1 with krsh kernel... its really nice on my wt19i
Did u wipe custom data and cache....???
Did u flash the .img file???
If u didn't then ur phone gets stuck at SE logo...
CM9 is ICS based so first
1. flash ICS
2. flash boot.img file (instde cm-9.0.0-coconut.zip)
3. Enter recovery (turn off ur phone and turn it on by pressing volume down key.)
4. wipe custom data and device cache
5. install cm-9.0.0-coconut.zip
6. reboot...
Ur CM9 will work
I recently rooted my galaxy sl using amit bagaria's universal cf root. After rebooting, the wifi wasn't switching on (it gave me an error message). So I googled it an found a solution. I flashed the bam kernel v14 (google it) and the wifi is working properly. Now, apparently the bam kernel v14 is not compatible with cm and i cannot flash any cm rom. Is that how it is supposed to be? How can i fix this? Thanks for all the help
rohit_6 said:
I recently rooted my galaxy sl using amit bagaria's universal cf root. After rebooting, the wifi wasn't switching on (it gave me an error message). So I googled it an found a solution. I flashed the bam kernel v14 (google it) and the wifi is working properly. Now, apparently the bam kernel v14 is not compatible with cm and i cannot flash any cm rom. Is that how it is supposed to be? How can i fix this? Thanks for all the help
Click to expand...
Click to collapse
The wifi problem is because you were on a value pack for 2.3.6, and if you root the device you can't use wifi unles you use bam kernel.
About CM, every ROM includes it's own kernel, so if you flash Dhiru's CM10 for example, this will come with it's own kernel and will install it automatically when you install the ROM. There are kernels for each Rom, so beware when you install a kernel on your Rom, first check if it's compatible. I think that's what you read about bam kernel, that is only compatible with Gingerbread.
PS: Please be more specific on the title next time
salaesp said:
The wifi problem is because you were on a value pack for 2.3.6, and if you root the device you can't use wifi unles you use bam kernel.
About CM, every ROM includes it's own kernel, so if you flash Dhiru's CM10 for example, this will come with it's own kernel and will install it automatically when you install the ROM. There are kernels for each Rom, so beware when you install a kernel on your Rom, first check if it's compatible. I think that's what you read about bam kernel, that is only compatible with Gingerbread.
PS: Please be more specific on the title next time
Click to expand...
Click to collapse
Alright.....now for example I want to flash Dhiru's CM10, how do I go about doing it? The normal way....with Odin? Just flash it PDA??
rohit_6 said:
Alright.....now for example I want to flash Dhiru's CM10, how do I go about doing it? The normal way....with Odin? Just flash it PDA??
Click to expand...
Click to collapse
No, you have to flash it using CWM. Please follow the installation instructions given in CM10 from dhiru:
http://forum.xda-developers.com/showthread.php?t=1868074
You are on stock rom, so follow the stock rom steps. You can skip the root step if you already rooted it.
As an advice, I suggest you make a /efs folder backup. This folder from your phone keeps a lot of information about it. I had some problems with 3g and stuff, and recovering it helped me. Before doing anything please read some threads about flashing this device.
Good luck!
Hi,
I have managed to put on a kernel that's not working. Is there a way to revert back to the original kernel? I do have a nandroid backup, but re-installing that didn't put on the old kernel.
I am using Liquidsmooth ROM. Any help would be appreciated.
Thanks.
if you can boot into the rom use flashimagegui, if not do the normal fastboot the boot.img then do it again with flashimagegui to get the modules.
what kernel did you try to flash? the only kernel that will work with new liquidsmooth is cm10.1_vz-oc-linaro.3.zip. it contains modules, if you aren't s-off then you need to flash boot.img in fastboot then flash again in recovery for the modules.
DvineLord said:
if you can boot into the rom use flashimagegui, if not do the normal fastboot the boot.img then do it again with flashimagegui to get the modules.
what kernel did you try to flash? the only kernel that will work with new liquidsmooth is cm10.1_vz-oc-linaro.3.zip. it contains modules, if you aren't s-off then you need to flash boot.img in fastboot then flash again in recovery for the modules.
Click to expand...
Click to collapse
I did exactly that, presuming that it was working... But I have been facing issues. The phone restarts every once in a while and I have managed to get to this condition after multiple wipes and restoring a backup. Anyways I don't know what the issue is I was just wondering how to revert back to the original kernel.
im running Liquid-JB-v2.1-RC2-evita.zip and cm10.1_vz-oc-linaro.3.zip. there seem to be some general issues with the rom that present as basically glitching and gets worse overtime atleast for me. im pretty sure it isnt related to the kernel. but to revert kernel just load the liquidsmooth zip into flashimagegui and itll pull the needed files, let it wipe cache and dalvik then reboot.
DvineLord said:
im running Liquid-JB-v2.1-RC2-evita.zip and cm10.1_vz-oc-linaro.3.zip. there seem to be some general issues with the rom that present as basically glitching and gets worse overtime atleast for me. im pretty sure it isnt related to the kernel. but to revert kernel just load the liquidsmooth zip into flashimagegui and itll pull the needed files, let it wipe cache and dalvik then reboot.
Click to expand...
Click to collapse
I do not have s-off does the flashimagegui works even without it?
strommer666 said:
I do not have s-off does the flashimagegui works even without it?
Click to expand...
Click to collapse
yes, Flash Image GUI
you should also s-off your phone it will make life ALOT easier and the process is simple take like 2 minutes.
DvineLord said:
yes, Flash Image GUI
you should also s-off your phone it will make life ALOT easier and the process is simple take like 2 minutes.
Click to expand...
Click to collapse
Thanks I'll make sure I do that..
also new stable build of liquidsmooth just got released. you should flash it. imma flash it with a clean full wipe. but you should s-off first so you dont have to flash boot.img separately every rom.
DvineLord said:
also new stable build of liquidsmooth just got released. you should flash it. imma flash it with a clean full wipe. but you should s-off first so you dont have to flash boot.img separately every rom.
Click to expand...
Click to collapse
Ya, I saw the new version wanted to try that which is why I wanted to got to the old kernel version. I had tried installing it with the linaro kernel but it gets stuck on the boot screen.
Update: - I installed the flash gui image, then extracted and installed the kernel , factory reset the phone, then installed the latest liquid smooth build. But it is still not going ahead of the boot animation.
Update 3 :- Got the old kernel back. Did a restore. Working fine now . But still for some reason I cannot install the new ROM yet.
strommer666 said:
Ya, I saw the new version wanted to try that which is why I wanted to got to the old kernel version. I had tried installing it with the linaro kernel but it gets stuck on the boot screen.
Update: - I installed the flash gui image, then extracted and installed the kernel , factory reset the phone, then installed the latest liquid smooth build. But it is still not going ahead of the boot animation.
Update 3 :- Got the old kernel back. Did a restore. Working fine now . But still for some reason I cannot install the new ROM yet.
Click to expand...
Click to collapse
you need everything. you don't need to extract the kernel. just load the whole zip file.
DvineLord said:
you need everything. you don't need to extract the kernel. just load the whole zip file.
Click to expand...
Click to collapse
I did load the full file and the flash gui image extracted the kernel. The thing is I have the kernel now, but still I can't seem to be able to install the new version of the LiquidSmooth build. I am doing a nandroid backup of this thing and try installing it again.
well new liquidsmooth is nice, im using cwm now as recovery since ive had tons of issues with twrp since version 2.2.2.0
Hello,
I'm running this custom rom and first i tried use the kernel Phantom-Kernel-v12 and after i tried the kernel ThunderZap, but the bolth kernels the wifi don't work.
Someone can help me?
thiagothomaz said:
Hello,
I'm running this custom rom and first i tried use the kernel Phantom-Kernel-v12 and after i tried the kernel ThunderZap, but the bolth kernels the wifi don't work.
Someone can help me?[/QUOI
Its a common thing when you first time flash kernel.
My solution. (and it works)
Flash kernel true flash tools.... ( thunder icon then flash fastboot then flash kernel.....you must extract the kernel zip then flash only his ,,boot.img,,)
IMPORTANT: BEFORE WHIPPING YOUR ROM PUT YOUR ZIP KERNEL FOLDER INTO YOUR INTERNAL DATA!!!
When you flash the kernel turn on your phone...wait while LED lamp is on then start tapping or hold volume button up on your phone.
Then you will enter into recovery.
True recovery flash new custom rom.....
When ROM install you wont have wi fi (not yet)
SOLUTION PART: Turn off your phone again then on,enter recovery and FLASH KERNEL AGAIN!!!
FIXED!
Click to expand...
Click to collapse
vuk030 said:
thiagothomaz said:
Hello,
I'm running this custom rom and first i tried use the kernel Phantom-Kernel-v12 and after i tried the kernel ThunderZap, but the bolth kernels the wifi don't work.
Someone can help me?[/QUOI
Its a common thing when you first time flash kernel.
My solution. (and it works)
Flash kernel true flash tools.... ( thunder icon then flash fastboot then flash kernel.....you must extract the kernel zip then flash only his ,,boot.img,,)
IMPORTANT: BEFORE WHIPPING YOUR ROM PUT YOUR ZIP KERNEL FOLDER INTO YOUR INTERNAL DATA!!!
When you flash the kernel turn on your phone...wait while LED lamp is on then start tapping or hold volume button up on your phone.
Then you will enter into recovery.
True recovery flash new custom rom.....
When ROM install you wont have wi fi (not yet)
SOLUTION PART: Turn off your phone again then on,enter recovery and FLASH KERNEL AGAIN!!!
FIXED!
Click to expand...
Click to collapse
Thanks for the reply. I tried, but with the ThunderZap Kernel yet not work. And the phantom kernel v 12 don't have any ".img".
I find this "solution" http://forum.xda-developers.com/showpost.php?p=50757236&postcount=244 but don't have the folder "/system/lib/modules/prima/".
any other tips?
Click to expand...
Click to collapse
thiagothomaz said:
Hello,
Someone can help me?
Click to expand...
Click to collapse
Using Kitkat roms required 4.2 stock to get wifi works..
Make sure you're came from that firmware
Dears,
I have nexus 5 with open bootloader + Recovery clockwork-6.0.4.4 + root + MIUI V5 custom Rom
because the lag and the hate of my phone especially when Turn on 3G data, I decided to change the kernel to custom kernel
then I used the franco kernel r63 from this post
http://forum.xda-developers.com/google-nexus-5/orig-development/kernel-franco-kernel-r53-t2508284
I used the "franco.Kernel updater Free App" to download the latest update and flash it
but after that the nuxes 5 didn't work, still stock on the logo of Rom !!
I tried to install the stock kernel from this link boot-4.4.1 by "fastboot flash boot" command but still same problem
and also I tried to install the Trinity Kernel "T5-4.4.2-B10" by flashboot command and still same problem,
and tried to re flash the Zip file of MUIU Rom, but nothing new, same problem stock on the logo picture of Rom when start !
any help please ?
I want to install the franco kernel with my MIUI Rom, even if the solution will remove all my App & data no problem !
none of those kernels are miui compatible. what you have to do is either flash the miui kernel(or compatible) or just reflash miui dirty(don't wipe anything).
Or just flash away from MIUI to get rid of your lag problem.
simms22 said:
none of those kernels are miui compatible. what you have to do is either flash the miui kernel(or compatible) or just reflash miui dirty(don't wipe anything).
Click to expand...
Click to collapse
simms22
Many thanks for you, I change the kernel and used this "Silean Kernel Nexus 5", which is compatible with MIUI rom, and My Nexus 5 go a way from last problem ! Thanks again. :good:
SilkyJohnson said:
Or just flash away from MIUI to get rid of your lag problem.
Click to expand...
Click to collapse
Thanks for your Idea, this is my first time with this rom and I found it Good if the new kernel will solve these two problems ! I hope or I will get new Rom ! do you recommend any new good Rom ?!
Nuxes 5
Sent from my Nexus 5