Stock ROM for Moto G4/G4 Plus NPJS25.93-14-8
Installing this Stock ROM will unroot your device and remove any custom Recovery.
If you device is soft bricked or facing bootloop issue or experience lags, then you should download and Flash this ROM.
This is the latest Stock Firmware of Moto G4 and Moto G4 Plus.
Build - NPJS25.93-14-8
This build will update your Bootloader. If you try to downgrade it for any reason, you may brick your device.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over any previous version including Soak ROM or MM or Custom ROM.
As you already know, you Don't have to unlock your bootloader.
Prerequisites:
RSDLite 6.2.4
Firmware 7.0_NPJS25.93-14-8 [Thanks to AFH and uploaders]
Procedure 1:
♦ Download the application RSDLite and install it.
♦ Download and unpack the firmware from rar.
♦ Run RSDLite.
♦ Click on the button with three dots and select flashall.xml.
♦ Reboot your phone into fastboot mode [press the volume down + power button]
♦ Connect your phone to a PC. The program should detect the phone.
♦ Press the Start button and wait until the end of the firmware until the phone restarts.
Procedure 2:
You can also use fastboot commands if you prefer it.
♦ Download ADB and fastboot driver for your PC/MAC
♦ Download and install Drivers for your Moto G4/G4 Plus
♦ Download ROM
♦ Now Power Off your phone and boot into Bootloader mode [Press and Hold "Power + Volume Down"]
♦ Use the below commands one by one. [If you are using mfastboot then type 'mfastboot' instead of 'fastboot']
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
If you want to lock your Bootloader use the below lines.
Code:
fastboot oem fb_mode_set
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot oem fb_mode_clear
fastboot reboot
or use the batch from attachment
You MUST take backup of your important data. I am NOT responsible for data loss or bricked device
Tested on my XT1643.
are you sure it works??
[email protected]$hil said:
are you sure it works??
Click to expand...
Click to collapse
it must have to. btw it worked for me
arunzone said:
it must have to. btw it worked for me
Click to expand...
Click to collapse
the firmware download link does not work.. it says something went wrong
[email protected]$hil said:
the firmware download link does not work.. it says something went wrong
Click to expand...
Click to collapse
check now. the link has been updated.
[email protected]$hil said:
the firmware download link does not work.. it says something went wrong
Click to expand...
Click to collapse
Translate the web page and sign in using google or telegram account.... it worked to download from there.... haven't installed tho...
arunzone said:
check now. the link has been updated.
Click to expand...
Click to collapse
Thnx now downloading
It works perfectly. I was able to flash lastest Nougat update over 1st Soak Test. It's completely not necessary to downgrade to MM and unlock bootloader.
How is this working???
Between 1st soak and final OTA, 2 more soak test builds came i heard. How is this process working for you. please help explain!!!
arunzone said:
Many of us has already installed the first soak test and now have problems while update to latest version. This tutorial is for those who don't want to unlock their bootloader.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over Soak Test ROM or MM.
You Don't have to unlock your bootloader or downgrade to MM and data will not be deleted.
Prerequisties:
RDSLite
Firmware
Procedure:
Download the program and install.
Download and unpack the firmware.
Run the program.
Click on the button with three dots and select flashall.xml.
Reboot your phone into fastboot mode [press the volume down + power button]
Connect your phone to a PC. The program should detect the phone.
Press the Start button and wait until the end of the firmware until the phone restarts.
As a precaution, enable OEM Unlocking under developer options. If anything goes wrong you can still unlock your bootloader and install custom firmware.
Also take backup of your important data.
I am not responsible if you brick your device.
Tested on my XT1643 with unlocked bootloader with soak 1.
Click to expand...
Click to collapse
Will it work with Windows XP? Also please mention required drivers & if possible link to download drivers.
arunzone said:
Many of us has already installed the first soak test and now have problems while update to latest version. This tutorial is for those who don't want to unlock their bootloader.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over Soak Test ROM or MM.
You Don't have to unlock your bootloader or downgrade to MM and data will not be deleted.
Prerequisties:
RDSLite
Firmware.
Click to expand...
Click to collapse
Does this Firmware support VoLTE?
Sent from my XT1562 using Tapatalk
Worked perfectly with modified system on first soaktest and twrp Recovery, so no need to delect them before. After flashing the updated firmware, the system is clean and Stock Recovery is back. :good:
kumeipark said:
Does this Firmware support VoLTE?
Click to expand...
Click to collapse
Yes it supports volte feature.
praveenbda said:
Will it work with Windows XP? Also please mention required drivers & if possible link to download drivers.
Click to expand...
Click to collapse
Yes. Please install drivers from Motorola website or from below link.
https://forum.xda-developers.com/showthread.php?t=2588979
rishisharma1986 said:
Between 1st soak and final OTA, 2 more soak test builds came i heard. How is this process working for you. please help explain!!!
Click to expand...
Click to collapse
Since this this is flashable, it doesn't look for what your Mobile already has. It will just install the rom. Even if you are not on official rom.
arunzone said:
Since this this is flashable, it doesn't look for what your Mobile already has. It will just install the rom. Even if you are not on official rom.
Click to expand...
Click to collapse
Will this clear all my data or just installs like ota ?
sam sundar said:
Will this clear all my data or just installs like ota ?
Click to expand...
Click to collapse
It won't delete your data. Just take a backup as a failsafe.
arunzone said:
it must have to. btw it worked for me
Click to expand...
Click to collapse
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
arc4d14n said:
Translate the web page and sign in using google or telegram account.... it worked to download from there.... haven't installed tho...
Click to expand...
Click to collapse
Bro how to translatethe webpage
gokulkishor said:
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
Bro how to translatethe webpage
Click to expand...
Click to collapse
Open the link in chrome and it ask to translate. That page contains only one button in the center of the page. Click it. A dialog box will appear, tick the check box and click on enabled button.
gokulkishor said:
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
Bro how to translatethe webpage
Click to expand...
Click to collapse
I've used Google Chrome automatic translate, anyway it was for older link, it has been updated, but if it's in Russian as the previous one, you can use the same method
Related
So many people are finding the correct way to lock bootloader so i created this thread.Just firstly be sure that you have downloaded the correct stock rom/firmware for your device otherwise you will be complaining for no wifi and network issue.Just follow this steps and you will successfully relock your bootloader.If any issues just reply i will help.I used fasboot so you can just replace it by mfastboot if you use mfast.Your warranty is still void after relocking,now its your luck if the service center guys check it or not!
1.Download the stock rom/firmware of your device.
2.Extract it and paste its contents in the adb folder.
3.Make sure that usb debugging is on.
4.Now in the adb folder shift+right click and then in the pop click open command window here.
5.Type in the cmd [adb reboot bootloader],you can do this manually also by power down first then power button+volume down.
6.Type [fastboot oem lock begin] it would then say flash stock images etc.
7.Then enter this commands and make sure you get okay after each command or you can just run the bat file uploaded(do put it in the adb folder)
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot reboot
8.Now your device will reboot with no bootloader unlock warning.
see this
i followed ur method but :crying::crying::crying:
samiran das 03 said:
i followed ur method but :crying::crying::crying:
Click to expand...
Click to collapse
If You Use XT1643 So Check This = http://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695
samiran das 03 said:
i followed ur method but :crying::crying::crying:
Click to expand...
Click to collapse
The problem with you is that you have flashed the old version of rom.Download the latest version of your phone rom.This error is caused when for eg. You currently have a rom version 2.0 ,and then try to flash rom 1.0.The bootloader gives an error.So you have to flash version 2.0.And the error imaged.not signed or corrupt is normal.
anhoxhrs said:
The problem with you is that you have flashed the old version of rom.Download the latest version of your phone rom.This error is caused when for eg. You currently have a rom version 2.0 ,and then try to flash rom 1.0.The bootloader gives an error.So you have to flash version 2.0.And the error imaged.not signed or corrupt is normal.
Click to expand...
Click to collapse
so what should i do now
plzz post the latest firmware
samiran das 03 said:
so what should i do now
plzz post the latest firmware
Click to expand...
Click to collapse
Send me screen shot of about phone
Plzz Check
Anything more u want???
samiran das 03 said:
Anything more u want???
Click to expand...
Click to collapse
Flash this https://drive.google.com/file/d/0B1N6dGU7FEXsSjR3QUtsRU1RTVk/viewAnd lock the bootloader with steps on the 1 post.
I tried using this firmware but its giving me same error.others are telling that the firmware which i am flasshing is old one.
But @swarupgolui told me to flash the lastest firmware
See this below
So what to do now?
samiran das 03 said:
So what to do now?
Click to expand...
Click to collapse
Whats Your Problem With lastest firmware?
swarupgolui said:
Whats Your Problem With lastest firmware?
Click to expand...
Click to collapse
Not done yet
I will do it tomorrow
samiran das 03 said:
So what to do now?
Click to expand...
Click to collapse
You tried the firmware in the link i gave?
anhoxhrs said:
You tried the firmware in the link i gave?
Click to expand...
Click to collapse
But in that my device is not mentioned
samiran das 03 said:
But in that my device is not mentioned
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B1N6dGU7FEXsSjR3QUtsRU1RTVk/view Just download this on chrome on your pc and flash.
Sure it will work na
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
Mine is xt1643
samiran das 03 said:
Sure it will work na
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
Mine is xt1643
Click to expand...
Click to collapse
It worked on mine i have same xt1643 32 gb
It's Working On XT1643, I Don't Know About Another
1. Download the Minimal ADB and Fastboot = https://drive.google.com/file/d/0B1MeY85PNSirb2tBdF9Vc3lTY3M/view?usp=sharing
2. Install Minimal ADB and Fastboot Or ( You Can Use mfastboot-v2 Search On xda )
3. Download the stock rom = https://drive.google.com/file/d/0B1MeY85PNSirRmRXX0Q1dHVfQkE/view?usp=sharing
4. Extract it and paste its contents in the adb folder.
5. Make sure that usb debugging is on.
6. Thane Reboot Your Phone On Bootloader Mode And Connect Usb On Your Phone
7. ( Now Run OEM lock.bat ) Or ( You Can Use Manually Now in the adb folder shift+right click and then in the pop click open command window here. )
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot reboot
Hope Its Helpful For You...
Thanks....
is it the latest firmware
samiran das 03 said:
is it the latest firmware
Click to expand...
Click to collapse
Yes It's The latest Signed Stock Firmware....
You Are On XT1643?
Yaa iam using the indian version of moto g4 plus
---------- Post added at 10:21 AM ---------- Previous post was at 10:19 AM ----------
I have started downloading i mean while i will try this
Is it the one with May 1st Security patch and April 28th Kernel version or the one after the OTA update? Can you please check the about phone details and clarify?
pradipsoman said:
Is it the one with May 1st Security patch and April 28th Kernel version or the one after the OTA update? Can you please check the about phone details and clarify?
Click to expand...
Click to collapse
after the OTA update
Flashed..and rooted...Working great..Thanks a ton
pradipsoman said:
Flashed..and rooted...Working great..Thanks a ton
Click to expand...
Click to collapse
Whats Is Ton?
How to flash?
Using twrp or fastboot command?
samiran das 03 said:
How to flash?
Using twrp or fastboot command?
Click to expand...
Click to collapse
It"s Stock Rom Dude Use fastboot
1. Download the Minimal ADB and Fastboot = https://drive.google.com/file/d/0B1M...ew?usp=sharing
2. Install Minimal ADB and Fastboot Or ( You Can Use mfastboot-v2 Search On xda )
3. Download the stock rom = https://drive.google.com/file/d/0B1M...ew?usp=sharing
4. Extract it and paste its contents in the adb folder.
5. Make sure that usb debugging is on.
6. Thane Reboot Your Phone On Bootloader Mode And Connect Usb On Your Phone
7. ( Now Run OEM lock.bat ) Or ( You Can Use Manually Now in the adb folder shift+right click and then in the pop click open command window here. )
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot reboot
swarupgolui said:
Whats Is Ton?
Click to expand...
Click to collapse
1 US Ton= 907.185 Kg.
swarupgolui said:
Whats Is Ton?
Click to expand...
Click to collapse
pradipsoman said:
Flashed..and rooted...Working great..Thanks a ton
Click to expand...
Click to collapse
wifi not working after root, which method did you follow
pp_prathap said:
wifi not working after root, which method did you follow
Click to expand...
Click to collapse
Be careful of which modified boot.img you use as the wifi works only with the stock Indian one. I did not go for that method. I followed the systemlesss root method.....just create a .supersu in /data and flashed superuserSu-V2.78..everything works...
thanks it worked
Thanks a million man!
I was stuck with some custom roms after trying them out and couldn't get the stock rom due to the restrictions of our damn government for Filefactory's website here in India. I thought I may have to stick with the custom rom forever without tasting the Nougat which is about to come. It was until last night when I found this post here and I flashed this without a single problem. And now, I am back with the good old stock and waiting for the Nougat OTA with patience and hope.
I simply can't thank you enough for this buddy. You saved me from the wrath of custom roms and their messed up bugs and so called customizations. There is nothing as simple and elegant as stock for Android. Thanks again! Appreciate it. :good:
Link broken
Link broken plz provide new link
Alexanderfedson said:
Link broken plz provide new link
Click to expand...
Click to collapse
Link Not broken Dude
Are I bengoli
samiran das 03 said:
Are I bengoli
Click to expand...
Click to collapse
I'm Bengali From Kolkata..........
swarupgolui said:
I'm Bengali From Kolkata..........
Click to expand...
Click to collapse
I also Bengali but from mumbai
---------- Post added at 12:29 PM ---------- Previous post was at 12:29 PM ----------
Areu
on facebook
Official zipped Nougat Stock firmware
https://mega.nz/#!ystC2ZSL!ql6cyC5v5RgLQfo7G44mhi7Ng-AQBvtsouKxKinbHi8
SHA-1 - 166d88ce734298dd40c1dbd7afbdac3c773a72ac
MD5 - b870c67a8020d314df3874c140606de4
CRC32 - cdfd2e36
Flash via fastboot.
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
Do it manually or with .bat in attachement (archived because of file ending)
Can I relock the bootloader, after flashing this firmware?
Pain00556 said:
Can I relock the bootloader, after flashing this firmware?
Click to expand...
Click to collapse
Yes, if you prefer.
Does anyone tried it on indian xt1643
can you upload it in androidfilehost or google drive or upload( modem NON-HLOS.bin ) from firmware zip please
Where did you get the zip from?All these posts claiming its official but don't point us to the source.
Prabhat00 said:
Does anyone tried it on indian xt1643
Click to expand...
Click to collapse
i myself tested its working fine
syedhmed said:
Where did you get the zip from?All these posts claiming its official but don't point us to the source.
Click to expand...
Click to collapse
http://www.filefactory.com/file/ikh...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip here source but it's blocked in india due to government restrictions so they uploaded it to mega and this is link for all motorola roms https://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=100
D1AMONDH3AD said:
http://www.filefactory.com/file/ikh...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip here source but it's blocked in india due to government restrictions so they uploaded it to mega and this is link for all motorola roms https://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=100
Click to expand...
Click to collapse
Yes...!
I tried it with my Indian Variant XT1643 and working well, locked bootloader as well, this is Official Full Stock Nougat 7.0 Rom NPJ25.93-11 With November Patch
No doubt you can try it guys ..
---------- Post added at 01:03 AM ---------- Previous post was at 01:00 AM ----------
Gimme some time guys, ZIP uploading in WeTransfer and Google Drive as well
Has anyone tried this with the XT1644
i tried downloading more than 6 times daam it failed everytime at 2.41gb i am done , can someone upload it to google drive
jerpd3rp said:
Has anyone tried this with the XT1644
Click to expand...
Click to collapse
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).
***Deleted***
Can Anyone help me out
I have downloaded both the firmware and fastboot files.
Now tell me what should I do next ??
@HE4VYCR0WN
Mercado_Negro said:
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).
Click to expand...
Click to collapse
This ROM works on xt1626 model brazilian with digital TV?
Sunny020 said:
Can Anyone help me out
I have downloaded both the firmware and fastboot files.
Now tell me what should I do next ??
@HE4VYCR0WN
Click to expand...
Click to collapse
Extract firmware in fastboot folder, then use SHIFT + RCLICK there (Open new command prompt) and insert commands in post #1 one by one
is it possible to put forth the command to erase userdata? so the flashing is done after wiping the phone
Mercado_Negro said:
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).
Click to expand...
Click to collapse
After flashing does it show retin or retus in the about section? And have you experienced any issues? I have a xt1644 g4plus 64gb/4gb model and wanna do the upgrade, but not if there's issues though. Thanks in advance
ice711 said:
After flashing does it show retin or retus in the about section? And have you experienced any issues? I have a xt1644 g4plus 64gb/4gb model and wanna do the upgrade, but not if there's issues though. Thanks in advance
Click to expand...
Click to collapse
It shows RETUS. No issues so far besides the notification sounds being low some times.
Flashed on my XT1644 g4plus on Verizon in the US yesterday.
So far, I have no issues to report. Seems to work fine. It does seem the battery drains faster, but I am likely just using it more looking for new stuff...
I do miss my ad blocker, though. Hopefully it'll be rooted soon, otherwise I may try a custom ROM just to keep these dang ads away...
Sent from my Moto G (4) using Tapatalk
Disclaimer: I am not responsible for anything that happens as a result of flashing these files. Your destiny is your own.
This firmware can be flashed on Both locked and Unlocked Bootloaders
Moto G4 Plus [XT1640/XT1641/XT1642/XT1643/XT1644] ATHENE NPJ25.93-14 FASTBOOT + Relock Bootloader
Requirements:
1. Download the Minimal ADB and Fastboot = https://www.androidfilehost.com/?fid=745425885120698566
2. Install Minimal ADB and Fastboot = https://forum.xda-developers.com/showthread.php?t=2317790
3. Moto Drivers
For Windows: http://www.devfiles.co/download/5eExXq3a/MotorolaDeviceManager_2.5.4.exe
For Mac:http://www.devfiles.co/download/i51GYJjz/MDM_Installer_2.2.9.dmg
4. Download Fastboot ROM Zip : https://drive.google.com/file/d/0Bx6eXSiwEdFFWXZyYjB5S0xlZWs/view :good:
Firmware via FASTBOOT:
1. Download the rar file and unzip it.
2.Extract all the files to your fasboot folder.
3.Restart the Moto G4 in fastboot mode.
4. Make sure that usb debugging is on.
5.Connect the Phone in fastboot mode to the computer
Run the "OEM Flash.bat" script that is inside the folder that is created when you unzip the file.(If you want to lock your bootloader Use "OEM lock.bat")
You Can also do it Manually In adb fastboot folder shift+right click and then in the pop up click open command window here
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (optional: will erase any customizations if ordered through motomaker)
fastboot erase clogo (optional: will erase the custom boot logo if ordered through motomaker)
fastboot oem lock
fastboot reboot
NOTE:
1. If you dont want to lock your bootloader just skip the "fastboot oem lock" and "fastboot oem lock begin" Commands
2. Since this file was compressed using 7zip you need 7zip to extract it using Winrar or Winzip will give you an error you can download 7zip from http://www.7-zip.org/download.html
3.Using the "OEM Flash.bat" or "OEM lock.bat" will wipe your data and all the Customizations like Root and Xposed and get it to Factory Condition if You are Reverting back to Stock from a Custom Rom Or Upgrading Stock it is Strongly Advised to Wipe your Data to avoid bugs and crashes(system/app)
In any case if you don't want to wipe data just remove this command "fastboot erase userdata" from the bat file or skip it if your flashing manually
HIT THANKS IF I HELPED YOU !
FOR FURTHER ASSISTANCE JOIN THE TELEGRAM GROUP FOR OUR G4 FAMILY https://telegram.me/g4plus
Works on XT1622 ?
kosmasgr said:
Works on XT1622 ?
Click to expand...
Click to collapse
May work not confirmed
kosmasgr said:
Works on XT1622 ?
Click to expand...
Click to collapse
Yes it does. Just used it to re lock my uk 1622. All seems to be working perfectly. Shows the correct model in about settings
oldsoulsong said:
Yes it does. Just used it to re lock my uk 1622. All seems to be working perfectly. Shows the correct model in about settings
Click to expand...
Click to collapse
Can confirm.
Just re-locked the bootloader on my European XT1622 with this.
Don't forget to enable OEM Unlocking and USB Debugging in Developer Options!
How about xt1641
Sent from my Moto G (4) using XDA-Developers Legacy app
Can i use this for rooted ressurection remix
Sent from my Moto G4 Plus using Tapatalk
tonypooyappallil said:
Can i use this for rooted ressurection remix
Click to expand...
Click to collapse
Yes
daeshawn said:
How about xt1641
Click to expand...
Click to collapse
Yes it works on xt1641
Greekgodmerwyn said:
Yes
Click to expand...
Click to collapse
So if i use this, i will relock my bootloader, then iam eligible for warranty?
Sent from my Moto G4 Plus using Tapatalk
tonypooyappallil said:
So if i use this, i will relock my bootloader, then iam eligible for warranty?
Click to expand...
Click to collapse
No you have received an unlock key from Motorola to unlock your bootloader hence when they enter your serial no they will find out in their data base that your device was unlocked
Greekgodmerwyn said:
No you have received an unlock key from Motorola to unlock your bootloader hence when they enter you serial no they will find out in their data base that your device was unlocked :good:
Click to expand...
Click to collapse
Okay. But the device will get locked bootloader right?
Sent from my Moto G4 Plus using Tapatalk
tonypooyappallil said:
Okay. But the device will get locked bootloader right?
Click to expand...
Click to collapse
Yes use the oemlock.bat or if you are doing it manually then use the OEM lock commands this will only work if you are upgrading
Greekgodmerwyn said:
Disclaimer: I am not responsible for anything that happens as a result of flashing these files. Your destiny is your own.
Moto G4 Plus [XT1640/XT1641/XT1642/XT1643] ATHENE NPJ25.93-14 FASTBOOT + Relock Bootloader
Requirements:
1. Download the Minimal ADB and Fastboot = https://drive.google.com/file/d/0B1M...ew?usp=sharing
2. Install Minimal ADB and Fastboot = https://forum.xda-developers.com/showthread.php?t=2317790
3. Moto Drivers
For Windows: http://www.devfiles.co/download/5eExXq3a/MotorolaDeviceManager_2.5.4.exe
For Mac:http://www.devfiles.co/download/i51GYJjz/MDM_Installer_2.2.9.dmg
4. Download Fastboot ROM Zip : https://drive.google.com/file/d/0Bx6eXSiwEdFFWXZyYjB5S0xlZWs/view :good:
Firmware via FASTBOOT:
1. Download the rar file and unzip it.
2.Extract all the files to your fasboot folder.
3.Restart the Moto G4 in fastboot mode.
4. Make sure that usb debugging is on.
5.Connect the Phone in fastboot mode to the computer
Run the "OEM Flash.bat" script that is inside the folder that is created when you unzip the file.(If you want to lock your bootloader Use "OEM lock.bat")
You Can also do it Manually In adb fastboot folder shift+right click and then in the pop up click open command window here
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot reboot
NOTE:
If you dont want to lock your bootloader just skip the "fastboot oem lock" and "fastboot oem lock begin" Commands
HIT THANKS IF I HELPED YOU !
FOR FURTHER ASSISTANCE JOIN THE TELEGRAM GROUP FOR OUR G4 FAMILY https://telegram.me/g4plus
Click to expand...
Click to collapse
The image is corrupted plz upload new image in google drive
a-2-k said:
The image is corrupted plz upload new image in google drive
Click to expand...
Click to collapse
Use 7Zip to Extract it is a 7zip file if you try to extract it with winrar or WinZip you will definitely get an error and please don't quote the whole thread while replying
Greekgodmerwyn said:
Use 7Zip to Extract it is a 7zip file if you try to extract it with winrar or WinZip you will definitely get an error and please don't quote the whole thread while replying
Click to expand...
Click to collapse
sorry I don't see....7zip
xploder270 said:
Can confirm.
Just re-locked the bootloader on my European XT1622 with this.
Don't forget to enable OEM Unlocking and USB Debugging in Developer Options!
Click to expand...
Click to collapse
What about your baseband version now ? Is it still EMEA ? (I am extra cautious not to lose European LTE bands).
a-2-k said:
sorry I don't see....7zip
Click to expand...
Click to collapse
download from here:
http://www.7-zip.org/download.html
rjtgupta84 said:
download from here:
http://www.7-zip.org/download.html
Click to expand...
Click to collapse
I think he meant to say that he didn't know that it was 7zip
Greekgodmerwyn said:
I think he meant to say that he didn't know that it was 7zip
Click to expand...
Click to collapse
Yes you got it
Disclaimer: I am not responsible for anything that happens as a result of flashing these files.
Latest Build Nougat:NPJS25.93-14-18 Tested on: All retail variants: XT1621, XT1622, XT1640, XT1641, XT1642, XT1643, XT1644
Latest Build Oreo: OPJ28.111-22-1 Tested on: All retail variants: XT1621, XT1622, XT1640, XT1641, XT1642, XT1643, XT1644
Note: Motorola doesn't allow downgrading so once u flash O via OTA/Fastboot it isn't recommended to go back to N or any older build than OPJ28.111-22 .
Downloads:
Stock N: ATHENE_NPJS25.93-14-18_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Stock O: ATHENE_OPJ28.111-22-1_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Note: If you're looking for a TWRP flashable version instead, please download that zip from the thread below, thanks to @Jleeblanch for providing this zip. Keep in mind that you can't take OTAs on this version as you'll be having TWRP and these zips don't upgrade your bootloader/gpt.
[ROM] TWRP Flashable Stock Firmware [7.0][8.1.0]
Procedure:
You must already have ADB and fastboot setup, check here if you haven't already as using adb/fastboot isn't within the scope of this thread.
How to Install ADB on Windows, macOS, and Linux
1. Download the file and extract the zip archive
2. Extract all the files to your fastboot folder. (Not needed if you have adb and fastboot added to the path, if you want to know how to do this, check this guide: How to Use ADB or Fastboot From Any Directory on your Windows/Linux PC)
3. Restart the device in fastboot/bootloader mode and connect to your PC.
4. Make sure the system detects the device in fastboot mode, to verify this your command window/terminal shows a serial number when you type:
Code:
fastboot devices
5. Use the following commands now or you can use the flash scripts provided as attachments to this post:
NOTE: SKIP the oem lock begin and the oem lock commands if you dont want to lock your bootloader
Linux users will need to change the extension to .sh and add sudo before each command or directly run it as a root user .
To simply flash, run the "OEM Flash" file; to lock the bootloader, run "OEM Lock" file.
Manual method:
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (optional: will erase any customizations if ordered through motomaker)
fastboot erase clogo (optional: will erase the custom boot logo if ordered through motomaker)
fastboot oem lock
fastboot reboot
Note: Many people have reported than flashing stock ROM after flashing a 64 bit Pie custom ROM leads to loss of IMEI. Just in case this happens to you, the fix has been made available by @Heeth21 . Also, some people suffer from having messed up Baseband, fingerprint detection or wrong IMEIs. Checkout both the threads here:
[Guide] [XT16XX] [Solve] Moto G4/Plus IMEI=0 issue.
[Guide] [XT16XX] [Solve] G4+ Baseband/Network/Volte issue, Lost 1 IMEI & fingerprint
For someone who has hardbricked his device , please refer to the following thread to get the raw bootloader and partition table and then flash the ROM as mentioned above.
[GUIDE] Moto G4 Plus HardBrick SOLVED - ULTIMATE UNBRICKING GUIDE
Credits:
TeamReviver
Motorola Mobility LLC
Android File Host
XDA-Developers
Thanks OP, i have a question, i am right now using NPJ25.93-11 from november 2016 on my XT1641. Can i just enter those commands:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
without loose any data? thanks in advance.
was looking forward to this, thank you OP!
moonlightdrive said:
Thanks OP, i have a question, i am right now using NPJ25.93-11 from november 2016 on my XT1641. Can i just enter those commands:
without loose any data? thanks in advance.
Click to expand...
Click to collapse
Those commands look okay - as always, try to back up your data as much as you can before flashing, in case you have to factory reset your device. I personally would also include 'fastboot erase cache' as a command (without the quotes), to wipe your cache, which shouldn't affect your data. You may experience a longer initial boot time as your system rebuilds the cache.
It's up to you if you wish to flash and update your gpt and bootloader as well - I don't know if not updating to the latest bootloader and gpt may affect future updates.
echo92 said:
Those commands look okay - as always, try to back up your data as much as you can before flashing, in case you have to factory reset your device. I personally would also include 'fastboot erase cache' as a command (without the quotes), to wipe your cache, which shouldn't affect your data. You may experience a longer initial boot time as your system rebuilds the cache.
It's up to you if you wish to flash and update your gpt and bootloader as well - I don't know if not updating to the latest bootloader and gpt may affect future updates.
Click to expand...
Click to collapse
Thank you for your complete answer:good:. I will take your suggestion of wiping cache.
moonlightdrive said:
Thank you for your complete answer:good:. I will take your suggestion of wiping cache.
Click to expand...
Click to collapse
Good luck with flashing - also, might be worth flashing the logo.bin too, so your flashing list would look more like (if including the gpt and bootloader):
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
moonlightdrive said:
Thanks OP, i have a question, i am right now using NPJ25.93-11 from november 2016 on my XT1641. Can i just enter those commands:
without loose any data? thanks in advance.
Click to expand...
Click to collapse
EDIT:
I report that it works perfectly (without loss of data).
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
echo92 said:
Good luck with flashing - also, might be worth flashing the logo.bin too, so your flashing list would look more like (if including the gpt and bootloader):
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
Click to expand...
Click to collapse
I just finished the flashing process, and it's all ok, everything works good now. thanks for helping me!
moonlightdrive said:
EDIT:
I report that it works perfectly (without loss of data).
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
Good luck with flashing - also, might be worth flashing the logo.bin too, so your flashing list would look more like (if including the gpt and bootloader):
I just finished the flashing process, and it's all ok, everything works good now. thanks for helping me!
Click to expand...
Click to collapse
Cool, will add it to the OP that it works fine on xt1641
How does one know which variants the referenced stock ROM applies to? I'm supposing it's any phone that lists NPJS25.93-14-4 under build number. Also, is this an official build direct from Motorola?
flroots said:
How does one know which variants the referenced stock ROM applies to? I'm supposing it's any phone that lists NPJS25.93-14-4 under build number. Also, is this an official build direct from Motorola?
Click to expand...
Click to collapse
Yes the ROM is officially signed by moto. Initial upload was done by the Moto Firmware team. It is confirmed to work on XT1641 and XT1643. Just like the Dec 1 Security firmware, this should probably work on the xt164* devices, as long they are retail versions. :good:
I will ask more people to try the same. :good:
A .bat file for commands would be really great..ease of use !
Thanks !
Sharp404 said:
A .bat file for commands would be really great..ease of use !
Thanks !
Click to expand...
Click to collapse
A zip containing the bat files has been attached to the OP. :good:
Great Job
I am now back to stock thanks for creating the fastboot rom i was eagerly waiting for it thank u
Anyone try it on xt1621?
Enviado desde donde estoy ahora. ¿Que esperabas?
tywinlannister7 said:
Yes the ROM is officially signed by moto. Initial upload was done by the Moto Firmware team. It is confirmed to work on XT1641 and XT1643. Just like the Dec 1 Security firmware, this should probably work on the xt164* devices, as long they are retail versions. :good:
I will ask more people to try the same. :good:
Click to expand...
Click to collapse
Can confirm it works on XT1640
Fede79 said:
Anyone try it on xt1621?
Enviado desde donde estoy ahora. ¿Que esperabas?
Click to expand...
Click to collapse
I dit, it works fine!
---------- Post added at 05:32 PM ---------- Previous post was at 05:31 PM ----------
It is laggy, am i the only one?????
It only happens when i flash the firmware from PC!
When i install marshmallow and i updated to Nougat it worked so smooth. What could be the problem?
Is this rom compatible with XT1626? If yes: can anyone share a screenshot with system infos? Thanks in advance.
At first thanks to tywinlannister7.
Anyone tried the rom on the XT1622?
where is the files OEM Flash" file; "OEM Lock" file. ???????
diegomartinezlovey said:
where is the files OEM Flash" file; "OEM Lock" file. ???????
Click to expand...
Click to collapse
Check the attachment in the OP.