[Android 7] [Nougat] [Stock] [Official] [Full] XT1624-XT1643_ATHENE_NPJ25.93-11 - Moto G4 Plus Guides, News, & Discussion

Official zipped Nougat Stock firmware
https://mega.nz/#!ystC2ZSL!ql6cyC5v5RgLQfo7G44mhi7Ng-AQBvtsouKxKinbHi8
SHA-1 - 166d88ce734298dd40c1dbd7afbdac3c773a72ac
MD5 - b870c67a8020d314df3874c140606de4
CRC32 - cdfd2e36
Flash via fastboot.
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
Do it manually or with .bat in attachement (archived because of file ending)

Can I relock the bootloader, after flashing this firmware?

Pain00556 said:
Can I relock the bootloader, after flashing this firmware?
Click to expand...
Click to collapse
Yes, if you prefer.

Does anyone tried it on indian xt1643

can you upload it in androidfilehost or google drive or upload( modem NON-HLOS.bin ) from firmware zip please

Where did you get the zip from?All these posts claiming its official but don't point us to the source.

Prabhat00 said:
Does anyone tried it on indian xt1643
Click to expand...
Click to collapse
i myself tested its working fine

syedhmed said:
Where did you get the zip from?All these posts claiming its official but don't point us to the source.
Click to expand...
Click to collapse
http://www.filefactory.com/file/ikh...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip here source but it's blocked in india due to government restrictions so they uploaded it to mega and this is link for all motorola roms https://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=100

D1AMONDH3AD said:
http://www.filefactory.com/file/ikh...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip here source but it's blocked in india due to government restrictions so they uploaded it to mega and this is link for all motorola roms https://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=100
Click to expand...
Click to collapse
Yes...!
I tried it with my Indian Variant XT1643 and working well, locked bootloader as well, this is Official Full Stock Nougat 7.0 Rom NPJ25.93-11 With November Patch
No doubt you can try it guys ..
---------- Post added at 01:03 AM ---------- Previous post was at 01:00 AM ----------
Gimme some time guys, ZIP uploading in WeTransfer and Google Drive as well

Has anyone tried this with the XT1644

i tried downloading more than 6 times daam it failed everytime at 2.41gb i am done , can someone upload it to google drive

jerpd3rp said:
Has anyone tried this with the XT1644
Click to expand...
Click to collapse
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).

***Deleted***

Can Anyone help me out
I have downloaded both the firmware and fastboot files.
Now tell me what should I do next ??
 @HE4VYCR0WN

Mercado_Negro said:
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).
Click to expand...
Click to collapse
This ROM works on xt1626 model brazilian with digital TV?

Sunny020 said:
Can Anyone help me out
I have downloaded both the firmware and fastboot files.
Now tell me what should I do next ??
@HE4VYCR0WN
Click to expand...
Click to collapse
Extract firmware in fastboot folder, then use SHIFT + RCLICK there (Open new command prompt) and insert commands in post #1 one by one

is it possible to put forth the command to erase userdata? so the flashing is done after wiping the phone

Mercado_Negro said:
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).
Click to expand...
Click to collapse
After flashing does it show retin or retus in the about section? And have you experienced any issues? I have a xt1644 g4plus 64gb/4gb model and wanna do the upgrade, but not if there's issues though. Thanks in advance

ice711 said:
After flashing does it show retin or retus in the about section? And have you experienced any issues? I have a xt1644 g4plus 64gb/4gb model and wanna do the upgrade, but not if there's issues though. Thanks in advance
Click to expand...
Click to collapse
It shows RETUS. No issues so far besides the notification sounds being low some times.

Flashed on my XT1644 g4plus on Verizon in the US yesterday.
So far, I have no issues to report. Seems to work fine. It does seem the battery drains faster, but I am likely just using it more looking for new stuff...
I do miss my ad blocker, though. Hopefully it'll be rooted soon, otherwise I may try a custom ROM just to keep these dang ads away...
Sent from my Moto G (4) using Tapatalk

Related

[ROM] Nougat Factory images 7.0_NPJS25.93-14-8

Stock ROM for Moto G4/G4 Plus NPJS25.93-14-8
Installing this Stock ROM will unroot your device and remove any custom Recovery.
If you device is soft bricked or facing bootloop issue or experience lags, then you should download and Flash this ROM.
This is the latest Stock Firmware of Moto G4 and Moto G4 Plus.
Build - NPJS25.93-14-8
This build will update your Bootloader. If you try to downgrade it for any reason, you may brick your device.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over any previous version including Soak ROM or MM or Custom ROM.
As you already know, you Don't have to unlock your bootloader.
Prerequisites:
RSDLite 6.2.4
Firmware 7.0_NPJS25.93-14-8 [Thanks to AFH and uploaders]
Procedure 1:
♦ Download the application RSDLite and install it.
♦ Download and unpack the firmware from rar.
♦ Run RSDLite.
♦ Click on the button with three dots and select flashall.xml.
♦ Reboot your phone into fastboot mode [press the volume down + power button]
♦ Connect your phone to a PC. The program should detect the phone.
♦ Press the Start button and wait until the end of the firmware until the phone restarts.
Procedure 2:
You can also use fastboot commands if you prefer it.
♦ Download ADB and fastboot driver for your PC/MAC
♦ Download and install Drivers for your Moto G4/G4 Plus
♦ Download ROM
♦ Now Power Off your phone and boot into Bootloader mode [Press and Hold "Power + Volume Down"]
♦ Use the below commands one by one. [If you are using mfastboot then type 'mfastboot' instead of 'fastboot']
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
If you want to lock your Bootloader use the below lines.
Code:
fastboot oem fb_mode_set
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot oem fb_mode_clear
fastboot reboot
or use the batch from attachment
You MUST take backup of your important data. I am NOT responsible for data loss or bricked device
Tested on my XT1643.
are you sure it works??
[email protected]$hil said:
are you sure it works??
Click to expand...
Click to collapse
it must have to. btw it worked for me
arunzone said:
it must have to. btw it worked for me
Click to expand...
Click to collapse
the firmware download link does not work.. it says something went wrong
[email protected]$hil said:
the firmware download link does not work.. it says something went wrong
Click to expand...
Click to collapse
check now. the link has been updated.
[email protected]$hil said:
the firmware download link does not work.. it says something went wrong
Click to expand...
Click to collapse
Translate the web page and sign in using google or telegram account.... it worked to download from there.... haven't installed tho...
arunzone said:
check now. the link has been updated.
Click to expand...
Click to collapse
Thnx now downloading
It works perfectly. I was able to flash lastest Nougat update over 1st Soak Test. It's completely not necessary to downgrade to MM and unlock bootloader.
How is this working???
Between 1st soak and final OTA, 2 more soak test builds came i heard. How is this process working for you. please help explain!!!
arunzone said:
Many of us has already installed the first soak test and now have problems while update to latest version. This tutorial is for those who don't want to unlock their bootloader.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over Soak Test ROM or MM.
You Don't have to unlock your bootloader or downgrade to MM and data will not be deleted.
Prerequisties:
RDSLite
Firmware
Procedure:
Download the program and install.
Download and unpack the firmware.
Run the program.
Click on the button with three dots and select flashall.xml.
Reboot your phone into fastboot mode [press the volume down + power button]
Connect your phone to a PC. The program should detect the phone.
Press the Start button and wait until the end of the firmware until the phone restarts.
As a precaution, enable OEM Unlocking under developer options. If anything goes wrong you can still unlock your bootloader and install custom firmware.
Also take backup of your important data.
I am not responsible if you brick your device.
Tested on my XT1643 with unlocked bootloader with soak 1.
Click to expand...
Click to collapse
Will it work with Windows XP? Also please mention required drivers & if possible link to download drivers.
arunzone said:
Many of us has already installed the first soak test and now have problems while update to latest version. This tutorial is for those who don't want to unlock their bootloader.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over Soak Test ROM or MM.
You Don't have to unlock your bootloader or downgrade to MM and data will not be deleted.
Prerequisties:
RDSLite
Firmware.
Click to expand...
Click to collapse
Does this Firmware support VoLTE?
Sent from my XT1562 using Tapatalk
Worked perfectly with modified system on first soaktest and twrp Recovery, so no need to delect them before. After flashing the updated firmware, the system is clean and Stock Recovery is back. :good:
kumeipark said:
Does this Firmware support VoLTE?
Click to expand...
Click to collapse
Yes it supports volte feature.
praveenbda said:
Will it work with Windows XP? Also please mention required drivers & if possible link to download drivers.
Click to expand...
Click to collapse
Yes. Please install drivers from Motorola website or from below link.
https://forum.xda-developers.com/showthread.php?t=2588979
rishisharma1986 said:
Between 1st soak and final OTA, 2 more soak test builds came i heard. How is this process working for you. please help explain!!!
Click to expand...
Click to collapse
Since this this is flashable, it doesn't look for what your Mobile already has. It will just install the rom. Even if you are not on official rom.
arunzone said:
Since this this is flashable, it doesn't look for what your Mobile already has. It will just install the rom. Even if you are not on official rom.
Click to expand...
Click to collapse
Will this clear all my data or just installs like ota ?
sam sundar said:
Will this clear all my data or just installs like ota ?
Click to expand...
Click to collapse
It won't delete your data. Just take a backup as a failsafe.
arunzone said:
it must have to. btw it worked for me
Click to expand...
Click to collapse
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
arc4d14n said:
Translate the web page and sign in using google or telegram account.... it worked to download from there.... haven't installed tho...
Click to expand...
Click to collapse
Bro how to translatethe webpage
gokulkishor said:
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
Bro how to translatethe webpage
Click to expand...
Click to collapse
Open the link in chrome and it ask to translate. That page contains only one button in the center of the page. Click it. A dialog box will appear, tick the check box and click on enabled button.
gokulkishor said:
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
Bro how to translatethe webpage
Click to expand...
Click to collapse
I've used Google Chrome automatic translate, anyway it was for older link, it has been updated, but if it's in Russian as the previous one, you can use the same method

Moto X Play (Europe XT1562) Nougat 7.1.1 Fastboot Download Link

XT1562 Single SIM
LUX_RETEU_7.1.1_NPD26.48-24-1_cid7_subsidy-DEFAULT_CFC.xml
https://rsdsecure-cloud.motorola.co...PD26.48-24-1_cid7_subsidy-DEFAULT_CFC.xml.zip
https://mega.nz/#!fUUSBCoJ!LXmGhG5EpFlT4bqUvU2aX8yoUVVJHgv8LVbMprzrqzI
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
Dual ?? Single SIM??
Enviado desde mi Moto X Play mediante Tapatalk
matuscristian said:
Dual ?? Single SIM??
Enviado desde mi Moto X Play mediante Tapatalk
Click to expand...
Click to collapse
Single SIM Europe
Upload XT1563 Latam SINGLE SIM Cid12 Please !!!
xt610 said:
Upload XT1563 Latam SINGLE SIM Cid12 Please !!!
Click to expand...
Click to collapse
The link is not active yet.
For now, it is not available for download.
https://rsdsecure-cloud.motorola.co...D26.48-24-1_cid12_subsidy-DEFAULT_CFC.xml.zip
Thanks
I waiting for available link
News ???
Seems to work fine, very big thanks, I was frustrated to be stuck with 6.0.1
PS : it's possible that the phone stay stuck on the boot logo, butI turned it off and on again and Android loaded within a few seconds
xt610 said:
News ???
Click to expand...
Click to collapse
XT1563 Latam SINGLE SIM Cid12
First, the 7.1.1 update is available for download in the OTA channel, and then after a few weeks, the fastboot image will be available for download.
]Devilman[ said:
Seems to work fine, very big thanks, I was frustrated to be stuck with 6.0.1
PS : it's possible that the phone stay stuck on the boot logo, butI turned it off and on again and Android loaded within a few seconds
Click to expand...
Click to collapse
You're welcome
Perfect original Image, all work fine, many thank's
Do I have to root my phone to flash this? I was hoping to load it from the bootloader but I can't get it to work. Thanks
DaveyC74 said:
Do I have to root my phone to flash this? I was hoping to load it from the bootloader but I can't get it to work. Thanks
Click to expand...
Click to collapse
Before you do anything, read about the fastboot program on the XDA forum. There is no root or unlocked bootloader required.
Which Baseband does this come with? Currently on M8936_2020632.44.03.21.57R and wondering if worth updating baseband only (currently using LOS 14.1 as ROM). Cheers
siarp said:
Which Baseband does this come with? Currently on M8936_2020632.44.03.21.57R and wondering if worth updating baseband only (currently using LOS 14.1 as ROM). Cheers
Click to expand...
Click to collapse
Baseband Version: M8936_20250112.18.05.38R
You can always test. Without loss of data, you can go back to the previous version of the modem(fastboot marshmallow 6.0.1).
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
QZmichal said:
Baseband Version: M8936_20250112.18.05.38R
You can always test. Without loss of data, you can go back to the previous version of the modem(fastboot marshmallow 6.0.1).
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
OK thanks for the info, tried the above commands (twice now) and under phone status the baseband version hasn't updated, the fastboot commands executed OK. Any ideas? Has it updated just not the references to the version?
Hello! I'm facing huge trouble with fastboot. Can someone have a Flashable Zip or a twrp backup of this OTA? :crying: thx a lot
Android Pay is not working unable to verify phone, unlocked bootloader etc. On Lineageos everything works greate.
twiti7 said:
Android Pay is not working unable to verify phone, unlocked bootloader etc. On Lineageos everything works greate.
Click to expand...
Click to collapse
Android Pay requires a blocked bootloader. In LIneageos or another custom rom, the Magisk program hides Root and the unlocked bootloader.
Install the Magisk program on a stock android
Or
You are blocking the bootloader
Thanks from now I'm using magisk

Stock xt 1572, RetEu, 7.0 DDumped files.

I was long time at MM sources.
Yesterday, Luis Gonzales created Resurrection Remix 5.8.5 working on Nougat baseband.
https://forum.xda-developers.com/mo...mix-v5-8-3-t3637204/post74686456#post74686456
So I updated my MXS to last N: 25.200-15-3
Before flashing custom I made DD backup of all needed partitions. I didn't try it but I think they are safe.
All can be flashed with fastboot.
System, boot, recovery with twrp too(flash from image).
All without root.
Kernel(boot) is untouched - without root - extracted from supersu backup.
https://mega.nz/#F!814XxZQK!g_INQT-O8ClpNttPc-wg6w
Flashing method:
fastboot oem fb_mode_set
fastboot flash logo logo.bin (unlocked BL warning!!!)
fastboot flash boot boot.img (rename downloaded file)
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot flash modem NON-HLOS.bin (Flash twice, if Prevalidation Error)
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Only for phones with unlocked BL and N version of BL & gpt.
Fastboot should sparse system.img itself.
Modems only(MM&N):
https://mega.nz/#F!FlxxUZxQ!M9kqWei99LXatwc4LgJORw
Mirror and instructions with comments - post #25
https://forum.xda-developers.com/showpost.php?p=74993383&postcount=25
MM recovery tool post #28
https://forum.xda-developers.com/showpost.php?p=75001459&postcount=28
Big thanks to @Prazaar
valerio32 said:
Modem is EU?
Click to expand...
Click to collapse
"Stock xt 1572, RetEu, 7.0 DDumped files."
valerio32 said:
you can do the ota updates and the recovery is original or is twrp?
---------- Post added at 03:34 PM ---------- Previous post was at 03:16 PM ----------
is normal "Invalid sparse file format at header magi"?
:crying::crying::crying::crying:
Click to expand...
Click to collapse
I don't understand. Upload screenshots somewhere.
valerio32 said:
the phone works, but how can I block the bootloader?
thank you
:crying::crying::crying::crying:
Click to expand...
Click to collapse
You can't untill will be flashable original stock for fastboot.
The same version or upper.
OTA - I don't think will be any more. But If you have last BL version shouldn't be any problems.
Btw
Did you flashed all partitions I uploaded? Only modem, fsg?
CAN NOT.
Hi,brother.could you please backup the bootloader file?
zi_mo said:
Hi,brother.could you please backup the bootloader file?
Click to expand...
Click to collapse
Only with flashfire app(rpm, sbl1, aboot, utags).
Flashfire says - restoring is most dangerous.
Thanks for replying.
My friend has a broken xs_EU with blocked BL by flashing stock_7.0BR,I thought that it would be rescued by flashing you files with gpt of the ota_patches if we got the file bl.
so, we must wait for the stock_7.0EU.
Will this work if I flash these files on my recently debricked (from downgrade) XS on MM 6.01?
Bootloader is still unlocked from the initial install of a custom ROM. But then I bricked it after downgrading from N to stock MM and installing OTA updates.
So just flash these files in fastboot and it should be on Nougat again unbricked?
I don't know.
There isn't bootloader & gpt into these files.
If your BL & gpt are Nougat you can flash it and later install ota updates @Murugan78
BL and GPT should still be N after the downgrade no? It went from MM to N with OTA when I bought it. Last month I installed Lineage ROM but decided to go stock again (and got bricked due to the N bootloader and gpt?). I get the prevalidation error when flashing BL and GPT from the official MM ROM so these must still be N if I am correct. This is my first moto device and I have done some custom things in the past with my S1, S2 and my OPO but never had these issues.
The sparsechunks are not necessary for trying to upgrade?
BL, gpt should be N. @Murugan78
And I can flash the system.img as 1 file instead of all the chunks?
Yes
fastboot flash system system.img
Flashed the files and so far so good! Got an OTA update without problems. Tomorrow I'm gonna test if my SIM works and maybe remove the unlocked bootloader message.
Thanks a LOT!
dzidexx said:
I was long time at MM sources.
Yesterday, Luis Gonzales created Resurrection Remix 5.8.5 working on Nougat baseband.
https://forum.xda-developers.com/mo...mix-v5-8-3-t3637204/post74686456#post74686456
So I updated my MXS to last N: 25.200-15-3
Before flashing custom I made DD backup of all needed partitions. I didn't try it but I think they are safe.
All can be flashed with fastboot.
System, boot, recovery with twrp too(flash from image).
All without root.
Kernel(boot) is untouched - without root - extracted from supersu backup.
https://mega.nz/#F!814XxZQK!g_INQT-O8ClpNttPc-wg6w
Flashing method:
fastboot oem fb_mode_set
fastboot flash logo logo.bin (unlocked BL warning!!!)
fastboot flash boot boot.img (rename downloaded file)
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot flash modem NON-HLOS.bin (Flash twice, if Prevalidation Error)
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Only for phones with unlocked BL and N version of BL & gpt.
Fastboot should sparse system.img itself.
Modems only(MM&N):
https://mega.nz/#F!FlxxUZxQ!M9kqWei99LXatwc4LgJORw
Click to expand...
Click to collapse
If i flash all with fastboot, i turn back my phone to the lastest N stock version.
I guess that it format internal storage too.
thi3um said:
If i flash all with fastboot, i turn back my phone to the lastest N stock version.
I guess that it format internal storage too.
Click to expand...
Click to collapse
This will format:
fastboot erase cache
fastboot erase userdata
You need it if you was on another version - 6.x or 7.1.2.
mirror online: https://dl.prazaar.de/?dir=Android/Motorola/XT1572/Dumped_Files
edit: The gpt.bin can be easily pulled from an OTA file
and the single bootloader files in: Blur_Version.24.231.13.clark_reteu.reteu.en.EU.zip:
tz.mbn, sdi.mbn, sbl1.mbn, pmic.mbn, rpm.mbn, hyp.mbn, fsg.mbn (but it "about.mbn" is missing)
I working on a Recovery Tool for Moto X Style (EU) XT1572 from 7.0 back to 6.0.1 with working OTAs
No other factory img is needed anymore. you want to be up to date? only OTAs needet for this
bootloader after this up to date!
The Recovery Tool bring you up to 6.0.1 without restriction.
https://dl.prazaar.de/?dir=Android/Motorola/XT1572/Factory/Recovery-Tool / for news prazaar.de
Just a question, I already have my xt 1572 reteu with the build version NPHS 25.200-15-3 like this dumped files, but I miss the October update, can I just flash recovery and boot.img from the dumped files in order to install the security patch? Thanks!!

[ROM] Official fastboot stock Oreo image (OPNS27.76-12-22-9)

Hi guys,
Did not see anyone who uploaded recently released Oreo fastboot image ROM (signed one), so I decided to do it by myself.
//update 26.09.2018
THE NEWEST STOCK FASTBOOT IMAGE (OPNS27.76-12-22-9):
DOWNLOAD: https://drive.google.com/file/d/1W-DXW1qm0g6GaALjKuA1pvM-_RHqlZ4j/view?usp=sharing
OLD FIRMWARE DOWNLOAD (OPN27.76-12-22)
DOWNLOAD: https://drive.google.com/file/d/1J3A1tXgYBt16-DLzbn1YnwboVHKq37D4/view?usp=sharing
MIRROR: https://mega.nz/#!K8NznAYY!5iwmWn8_BmoQrQF8-LPPykffrpglp5VZWxS6_We-njk
Flashing scripts:
If you are not sure what are you doing, ask here or read fastboot documentation before flashing anything:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot erase cache
fastboot erase userdata
fastboot erase carrier
fastboot erase DDR
fastboot reboot
This can be applied to reteu?
ruphert said:
This can be applied to reteu?
Click to expand...
Click to collapse
Yes, it can be.
It can be applied to any software channel.
Thank you, where did you get it please ?
Jagadhidh said:
Thank you, where did you get it please ?
Click to expand...
Click to collapse
Directly fom Motorola servers.
Do you know when the blank flash for oreo will come out?
Brann_97 said:
Do you know when the blank flash for oreo will come out?
Click to expand...
Click to collapse
Unfortunately, I've no clue.
Will it work on 1635-01 (Verizon one)?
One question
Hey, Dude.
Following these steps locks the bootloader again?
Thanks!
DomBuback said:
Hey, Dude.
Following these steps locks the bootloader again?
Thanks!
Click to expand...
Click to collapse
No, check this thread for that: https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-oreo-bootloader-to-stock-t3784621
Hi man i have the stock oreo already with the adb sideload process, is this process better thant the last one? i can do this process over a already stock oreo installed? (sorry for my english hehe)
I'm on rooted on stock 7.1 with December patch. Can I flash tis? Or do I need to go back to stock first?
Are you kidding me, there are 2 threads already for Oreo flash files. Do look for matching threads before opening a new one.
Anyway to fo back to naugat from oero?
Brann_97 said:
Do you know when the blank flash for oreo will come out?
Click to expand...
Click to collapse
You tested any of this?
https://mirrors.lolinet.com/firmware/moto/addison/blankflash
Manish355 said:
Are you kidding me, there are 2 threads already for Oreo flash files. Do look for matching threads before opening a new one.
Click to expand...
Click to collapse
Well, I'm not kidding you, sorry.
There are two different Oreo threads but both are about OTA.
Hi everyone, hope you can help me, im on stock 7.1.1 1st september´s 2017 patch, locked bootloader, software chanel attmx NPN26.118-22-2, can i just sideload this and get directly to oreo?, thanks.
shaoran23 said:
Hi everyone, hope you can help me, im on stock 7.1.1 1st september´s 2017 patch, locked bootloader, software chanel attmx NPN26.118-22-2, can i just sideload this and get directly to oreo?, thanks.
Click to expand...
Click to collapse
This is not the OTA, it can't be sideloaded. You have to flash this through fastboot (and you need a unlocked bootloader to do so)
Is the method usable for oreo feb patch with twrp installed?
The Bankshooter said:
Is the method usable for oreo feb patch with twrp installed?
Click to expand...
Click to collapse
Yes, it is.

Just installed June security patch (ALI)

Hey, I just installed June security patch on my Moto G6 and I gotta say this build is super smooth.
I’m getting more than 5-6hrs of SOT and yes DIGITAL WELLBEING IS A SYSTEM APP NOW.
I downloaded the latest firmware from here : https://mirrors.lolinet.com/firmware/moto/ali/official/RETAIL/
And flashed it via RSD Lite.
Don’t forget to hit thanks
aaryan1596 said:
Hey, I just installed June security patch on my Moto G6 and I gotta say this build is super smooth.
I’m getting more than 5-6hrs of SOT and yes DIGITAL WELLBEING IS A SYSTEM APP NOW.
I downloaded the latest firmware from here : https://mirrors.lolinet.com/firmware/moto/ali/official/RETAIL/
And flashed it via RSD Lite.
Don’t forget to hit thanks
Click to expand...
Click to collapse
Can I install this patch with Android 9 OTA with Root?
bradz28 said:
Can I install this patch with Android 9 OTA with Root?
Click to expand...
Click to collapse
No, unfortunately not. This is a full wipe/fresh install only. The same rooting method works, but it will have to be a fresh install.
xfrobex said:
No, unfortunately not. This is a full wipe/fresh install only. The same rooting method works, but it will have to be a fresh install.
Click to expand...
Click to collapse
Ok, thanks
Hello, I upgraded my phone through CMD commands in fastboot folder, but now I can't hear nor be heard in calls. I tried already intalling the NON-HLOS.bin from Stock ROM RETAIL OPSS27.104-92-4 and tried with the NON-HLOS.bin from the Sotck ROM from my region OPENMX OPSS27.82-87-8 too, but it didn't work.
Tried turning the phone on Secure Mode to see if it was a problem related with an app but it wasn't the case, also tried couple of times doing factory reset, but it gave the same result.
I was on the RETAIL PPSS29.55-34-1 with NON-HLOS.bin from OPENMX OPSS27.82-87-8 and the calls were fine. Could someone help me, please?
I did all of above with locked bootloader.
Edit:
Now I unlocked bootloader to downgrading to RETAIL PPSS29.55-34-1 with NON-HLOS.bin from OPENMX OPSS27.82-87-8, and it didn't work so I relock bootloader.
mariconojoda said:
Hello, I upgraded my phone through CMD commands in a fastboot folder, but now I can't hear and can't be heard in calls. I tried already intalling the NON-HLOS.bin from Stock ROM RETAIL OPSS27.104-92-4 and tried with the NON-HLOS.bin from the Sotck ROM from my region OPENMX OPSS27.82-87-8, but it didn't work.
Also tried turning the phone on Secure Mode to see if it was a problem related with an app but it wasn't the case, also tried couple of times doing factory reset, but it gave the same result.
I was on the RETAIL PPSS29.55-34-1 and the calls were fine. Could someone help me, please?
All of above with locked bootloader.
Edit:
Now I unlocked bootloader to downgrading, I donwgrade to RETAIL PPSS29.55-34-1 with NON-HLOS.bin from OPENMX OPSS27.82-87-8, it didn't work so I relock bootloader.
Click to expand...
Click to collapse
As you unlocked the bootloader your warranty is gone, plus I didn’t try with CMD commands, I used RSD Lite, so maybe try a fresh install again if problem persists.
aaryan1596 said:
As you unlocked the bootloader your warranty is gone, plus I didn’t try with CMD commands, I used RSD Lite, so maybe try a fresh install again if problem persists.
Click to expand...
Click to collapse
It don't recognize the device
Nevermind I just needed to connect the device in another port, also now the calls work thank you @aaryan1596
How do I install this without RSDLite? The program doesn't work for me at all (v5.7 on Win10), and I do not fully understand how to use fastboot/batch files to install the unpacked .zip file. Thank you for your help.
Edit: I was able to easily install this using Minimal ADB and Fastboot. Simply extract the contents of your .xml.zip file to your Minimal ADB and Fastboot installation folder. Boot your phone into fastboot mode (volume+power down) and copy and paste these commands (you can copy and paste the entire block and they will run sequentially):
Code:
fastboot erase userdata
fastboot erase cache
fastboot erase modemst1
fastboot erase modemst2
fastboot erase carrier
fastboot erase DDR
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash oem oem.img
fastboot flash logo logo.bin
fastboot flash dsp adspso.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot erase cache
fastboot reboot
Using this method I was able to easily install to latest version onto my XT1925-6, which shipped with Oreo.
Is there any different between ROM with february security patch and this one (june security patch)?
Has anyone in the UK been able to download this update via system updates yet?
um.z said:
Has anyone in the UK been able to download this update via system updates yet?
Click to expand...
Click to collapse
Just downloading via system updates, channel: retgb.
Well, I received the June 1, PPS29.55-37-4 OTA (retgb channel) at around 9:40pm (Mon 5th Aug, UK time). It took 12 minutes to download the 818.6Mb package over a 4G connection, and a further 26 minutes to install it.
Everything went without a hitch, and all seemed perfectly fine afterwards...
...however, having previously read about the problems reported here on XDA and on the Lenovo/Motorola community support forum regarding recent Pie updates, I decided to perform a factory wipe/reset immediately after the update. A tiresome chore to be sure, having to set everything up again aftwards, but it just seemed the prudent thing to do.
So now, some 19 hours later, my G6 is still working perfectly, with no obvious problems, and it does certainly feel smoother and more responsive than it's predecessor, PPS29.55-24, which I received at the end of March. And, yep, this new 'build' includes Google's Digital Wellbeing app integrated at the system level, so I guess that's something new to tinker around with.
Anyhow, just some thoughts regarding my experience of updating to this latest version of Pie.
Rgrds,
Ged.
test

Categories

Resources