Database Info

MOTO G4 Plus XT1643 Updated Signed Stock Rom MPJ24.139-63 + Relock The Bootloader

It's Working On XT1643, I Don't Know About Another
1. Download the Minimal ADB and Fastboot = https://drive.google.com/file/d/0B1MeY85PNSirb2tBdF9Vc3lTY3M/view?usp=sharing
2. Install Minimal ADB and Fastboot Or ( You Can Use mfastboot-v2 Search On xda )
3. Download the stock rom = https://drive.google.com/file/d/0B1MeY85PNSirRmRXX0Q1dHVfQkE/view?usp=sharing
4. Extract it and paste its contents in the adb folder.
5. Make sure that usb debugging is on.
6. Thane Reboot Your Phone On Bootloader Mode And Connect Usb On Your Phone
7. ( Now Run OEM lock.bat ) Or ( You Can Use Manually Now in the adb folder shift+right click and then in the pop click open command window here. )
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot reboot
Hope Its Helpful For You...
Thanks....

is it the latest firmware

samiran das 03 said:
is it the latest firmware
Click to expand...
Click to collapse
Yes It's The latest Signed Stock Firmware....
You Are On XT1643?

Yaa iam using the indian version of moto g4 plus
---------- Post added at 10:21 AM ---------- Previous post was at 10:19 AM ----------
I have started downloading i mean while i will try this

Is it the one with May 1st Security patch and April 28th Kernel version or the one after the OTA update? Can you please check the about phone details and clarify?

pradipsoman said:
Is it the one with May 1st Security patch and April 28th Kernel version or the one after the OTA update? Can you please check the about phone details and clarify?
Click to expand...
Click to collapse
after the OTA update

Flashed..and rooted...Working great..Thanks a ton

pradipsoman said:
Flashed..and rooted...Working great..Thanks a ton
Click to expand...
Click to collapse
Whats Is Ton?

How to flash?
Using twrp or fastboot command?

samiran das 03 said:
How to flash?
Using twrp or fastboot command?
Click to expand...
Click to collapse
It"s Stock Rom Dude Use fastboot
1. Download the Minimal ADB and Fastboot = https://drive.google.com/file/d/0B1M...ew?usp=sharing
2. Install Minimal ADB and Fastboot Or ( You Can Use mfastboot-v2 Search On xda )
3. Download the stock rom = https://drive.google.com/file/d/0B1M...ew?usp=sharing
4. Extract it and paste its contents in the adb folder.
5. Make sure that usb debugging is on.
6. Thane Reboot Your Phone On Bootloader Mode And Connect Usb On Your Phone
7. ( Now Run OEM lock.bat ) Or ( You Can Use Manually Now in the adb folder shift+right click and then in the pop click open command window here. )
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot reboot

swarupgolui said:
Whats Is Ton?
Click to expand...
Click to collapse
1 US Ton= 907.185 Kg.

swarupgolui said:
Whats Is Ton?
Click to expand...
Click to collapse
pradipsoman said:
Flashed..and rooted...Working great..Thanks a ton
Click to expand...
Click to collapse
wifi not working after root, which method did you follow

pp_prathap said:
wifi not working after root, which method did you follow
Click to expand...
Click to collapse
Be careful of which modified boot.img you use as the wifi works only with the stock Indian one. I did not go for that method. I followed the systemlesss root method.....just create a .supersu in /data and flashed superuserSu-V2.78..everything works...

thanks it worked

Thanks a million man!
I was stuck with some custom roms after trying them out and couldn't get the stock rom due to the restrictions of our damn government for Filefactory's website here in India. I thought I may have to stick with the custom rom forever without tasting the Nougat which is about to come. It was until last night when I found this post here and I flashed this without a single problem. And now, I am back with the good old stock and waiting for the Nougat OTA with patience and hope.
I simply can't thank you enough for this buddy. You saved me from the wrath of custom roms and their messed up bugs and so called customizations. There is nothing as simple and elegant as stock for Android. Thanks again! Appreciate it. :good:

Link broken
Link broken plz provide new link

Alexanderfedson said:
Link broken plz provide new link
Click to expand...
Click to collapse
Link Not broken Dude

Are I bengoli

samiran das 03 said:
Are I bengoli
Click to expand...
Click to collapse
I'm Bengali From Kolkata..........

swarupgolui said:
I'm Bengali From Kolkata..........
Click to expand...
Click to collapse
I also Bengali but from mumbai
---------- Post added at 12:29 PM ---------- Previous post was at 12:29 PM ----------
Areu
on facebook

[ROM] Nougat Factory images 7.0_NPJS25.93-14-8

Stock ROM for Moto G4/G4 Plus NPJS25.93-14-8
Installing this Stock ROM will unroot your device and remove any custom Recovery.
If you device is soft bricked or facing bootloop issue or experience lags, then you should download and Flash this ROM.
This is the latest Stock Firmware of Moto G4 and Moto G4 Plus.
Build - NPJS25.93-14-8
This build will update your Bootloader. If you try to downgrade it for any reason, you may brick your device.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over any previous version including Soak ROM or MM or Custom ROM.
As you already know, you Don't have to unlock your bootloader.
Prerequisites:
RSDLite 6.2.4
Firmware 7.0_NPJS25.93-14-8 [Thanks to AFH and uploaders]
Procedure 1:
♦ Download the application RSDLite and install it.
♦ Download and unpack the firmware from rar.
♦ Run RSDLite.
♦ Click on the button with three dots and select flashall.xml.
♦ Reboot your phone into fastboot mode [press the volume down + power button]
♦ Connect your phone to a PC. The program should detect the phone.
♦ Press the Start button and wait until the end of the firmware until the phone restarts.
Procedure 2:
You can also use fastboot commands if you prefer it.
♦ Download ADB and fastboot driver for your PC/MAC
♦ Download and install Drivers for your Moto G4/G4 Plus
♦ Download ROM
♦ Now Power Off your phone and boot into Bootloader mode [Press and Hold "Power + Volume Down"]
♦ Use the below commands one by one. [If you are using mfastboot then type 'mfastboot' instead of 'fastboot']
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
If you want to lock your Bootloader use the below lines.
Code:
fastboot oem fb_mode_set
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot oem fb_mode_clear
fastboot reboot
or use the batch from attachment
You MUST take backup of your important data. I am NOT responsible for data loss or bricked device
Tested on my XT1643.

are you sure it works??

[email protected]$hil said:
are you sure it works??
Click to expand...
Click to collapse
it must have to. btw it worked for me

arunzone said:
it must have to. btw it worked for me
Click to expand...
Click to collapse
the firmware download link does not work.. it says something went wrong

[email protected]$hil said:
the firmware download link does not work.. it says something went wrong
Click to expand...
Click to collapse
check now. the link has been updated.

[email protected]$hil said:
the firmware download link does not work.. it says something went wrong
Click to expand...
Click to collapse
Translate the web page and sign in using google or telegram account.... it worked to download from there.... haven't installed tho...

arunzone said:
check now. the link has been updated.
Click to expand...
Click to collapse
Thnx now downloading

It works perfectly. I was able to flash lastest Nougat update over 1st Soak Test. It's completely not necessary to downgrade to MM and unlock bootloader.

How is this working???
Between 1st soak and final OTA, 2 more soak test builds came i heard. How is this process working for you. please help explain!!!

arunzone said:
Many of us has already installed the first soak test and now have problems while update to latest version. This tutorial is for those who don't want to unlock their bootloader.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over Soak Test ROM or MM.
You Don't have to unlock your bootloader or downgrade to MM and data will not be deleted.
Prerequisties:
RDSLite
Firmware
Procedure:
Download the program and install.
Download and unpack the firmware.
Run the program.
Click on the button with three dots and select flashall.xml.
Reboot your phone into fastboot mode [press the volume down + power button]
Connect your phone to a PC. The program should detect the phone.
Press the Start button and wait until the end of the firmware until the phone restarts.
As a precaution, enable OEM Unlocking under developer options. If anything goes wrong you can still unlock your bootloader and install custom firmware.
Also take backup of your important data.
I am not responsible if you brick your device.
Tested on my XT1643 with unlocked bootloader with soak 1.
Click to expand...
Click to collapse
Will it work with Windows XP? Also please mention required drivers & if possible link to download drivers.

arunzone said:
Many of us has already installed the first soak test and now have problems while update to latest version. This tutorial is for those who don't want to unlock their bootloader.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over Soak Test ROM or MM.
You Don't have to unlock your bootloader or downgrade to MM and data will not be deleted.
Prerequisties:
RDSLite
Firmware.
Click to expand...
Click to collapse
Does this Firmware support VoLTE?
Sent from my XT1562 using Tapatalk

Worked perfectly with modified system on first soaktest and twrp Recovery, so no need to delect them before. After flashing the updated firmware, the system is clean and Stock Recovery is back. :good:

kumeipark said:
Does this Firmware support VoLTE?
Click to expand...
Click to collapse
Yes it supports volte feature.

praveenbda said:
Will it work with Windows XP? Also please mention required drivers & if possible link to download drivers.
Click to expand...
Click to collapse
Yes. Please install drivers from Motorola website or from below link.
https://forum.xda-developers.com/showthread.php?t=2588979

rishisharma1986 said:
Between 1st soak and final OTA, 2 more soak test builds came i heard. How is this process working for you. please help explain!!!
Click to expand...
Click to collapse
Since this this is flashable, it doesn't look for what your Mobile already has. It will just install the rom. Even if you are not on official rom.

arunzone said:
Since this this is flashable, it doesn't look for what your Mobile already has. It will just install the rom. Even if you are not on official rom.
Click to expand...
Click to collapse
Will this clear all my data or just installs like ota ?

sam sundar said:
Will this clear all my data or just installs like ota ?
Click to expand...
Click to collapse
It won't delete your data. Just take a backup as a failsafe.

arunzone said:
it must have to. btw it worked for me
Click to expand...
Click to collapse
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
arc4d14n said:
Translate the web page and sign in using google or telegram account.... it worked to download from there.... haven't installed tho...
Click to expand...
Click to collapse
Bro how to translatethe webpage

gokulkishor said:
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
Bro how to translatethe webpage
Click to expand...
Click to collapse
Open the link in chrome and it ask to translate. That page contains only one button in the center of the page. Click it. A dialog box will appear, tick the check box and click on enabled button.

gokulkishor said:
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
Bro how to translatethe webpage
Click to expand...
Click to collapse
I've used Google Chrome automatic translate, anyway it was for older link, it has been updated, but if it's in Russian as the previous one, you can use the same method

Stock N/O Firmware [Apr 01/Dec 01 Security Patch][fastboot][7.0/8.1]

Disclaimer: I am not responsible for anything that happens as a result of flashing these files.
Latest Build Nougat:NPJS25.93-14-18 Tested on: All retail variants: XT1621, XT1622, XT1640, XT1641, XT1642, XT1643, XT1644
Latest Build Oreo: OPJ28.111-22-1 Tested on: All retail variants: XT1621, XT1622, XT1640, XT1641, XT1642, XT1643, XT1644
Note: Motorola doesn't allow downgrading so once u flash O via OTA/Fastboot it isn't recommended to go back to N or any older build than OPJ28.111-22 .
Downloads:
Stock N: ATHENE_NPJS25.93-14-18_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Stock O: ATHENE_OPJ28.111-22-1_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Note: If you're looking for a TWRP flashable version instead, please download that zip from the thread below, thanks to @Jleeblanch for providing this zip. Keep in mind that you can't take OTAs on this version as you'll be having TWRP and these zips don't upgrade your bootloader/gpt.
[ROM] TWRP Flashable Stock Firmware [7.0][8.1.0]
Procedure:
You must already have ADB and fastboot setup, check here if you haven't already as using adb/fastboot isn't within the scope of this thread.
How to Install ADB on Windows, macOS, and Linux
1. Download the file and extract the zip archive
2. Extract all the files to your fastboot folder. (Not needed if you have adb and fastboot added to the path, if you want to know how to do this, check this guide: How to Use ADB or Fastboot From Any Directory on your Windows/Linux PC)
3. Restart the device in fastboot/bootloader mode and connect to your PC.
4. Make sure the system detects the device in fastboot mode, to verify this your command window/terminal shows a serial number when you type:
Code:
fastboot devices
5. Use the following commands now or you can use the flash scripts provided as attachments to this post:
NOTE: SKIP the oem lock begin and the oem lock commands if you dont want to lock your bootloader
Linux users will need to change the extension to .sh and add sudo before each command or directly run it as a root user .
To simply flash, run the "OEM Flash" file; to lock the bootloader, run "OEM Lock" file.
Manual method:
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (optional: will erase any customizations if ordered through motomaker)
fastboot erase clogo (optional: will erase the custom boot logo if ordered through motomaker)
fastboot oem lock
fastboot reboot
Note: Many people have reported than flashing stock ROM after flashing a 64 bit Pie custom ROM leads to loss of IMEI. Just in case this happens to you, the fix has been made available by @Heeth21 . Also, some people suffer from having messed up Baseband, fingerprint detection or wrong IMEIs. Checkout both the threads here:
[Guide] [XT16XX] [Solve] Moto G4/Plus IMEI=0 issue.
[Guide] [XT16XX] [Solve] G4+ Baseband/Network/Volte issue, Lost 1 IMEI & fingerprint
For someone who has hardbricked his device , please refer to the following thread to get the raw bootloader and partition table and then flash the ROM as mentioned above.
[GUIDE] Moto G4 Plus HardBrick SOLVED - ULTIMATE UNBRICKING GUIDE
Credits:
TeamReviver
Motorola Mobility LLC
Android File Host
XDA-Developers

Thanks OP, i have a question, i am right now using NPJ25.93-11 from november 2016 on my XT1641. Can i just enter those commands:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
without loose any data? thanks in advance.

was looking forward to this, thank you OP!

moonlightdrive said:
Thanks OP, i have a question, i am right now using NPJ25.93-11 from november 2016 on my XT1641. Can i just enter those commands:
without loose any data? thanks in advance.
Click to expand...
Click to collapse
Those commands look okay - as always, try to back up your data as much as you can before flashing, in case you have to factory reset your device. I personally would also include 'fastboot erase cache' as a command (without the quotes), to wipe your cache, which shouldn't affect your data. You may experience a longer initial boot time as your system rebuilds the cache.
It's up to you if you wish to flash and update your gpt and bootloader as well - I don't know if not updating to the latest bootloader and gpt may affect future updates.

echo92 said:
Those commands look okay - as always, try to back up your data as much as you can before flashing, in case you have to factory reset your device. I personally would also include 'fastboot erase cache' as a command (without the quotes), to wipe your cache, which shouldn't affect your data. You may experience a longer initial boot time as your system rebuilds the cache.
It's up to you if you wish to flash and update your gpt and bootloader as well - I don't know if not updating to the latest bootloader and gpt may affect future updates.
Click to expand...
Click to collapse
Thank you for your complete answer:good:. I will take your suggestion of wiping cache.

moonlightdrive said:
Thank you for your complete answer:good:. I will take your suggestion of wiping cache.
Click to expand...
Click to collapse
Good luck with flashing - also, might be worth flashing the logo.bin too, so your flashing list would look more like (if including the gpt and bootloader):
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot

moonlightdrive said:
Thanks OP, i have a question, i am right now using NPJ25.93-11 from november 2016 on my XT1641. Can i just enter those commands:
without loose any data? thanks in advance.
Click to expand...
Click to collapse
EDIT:
I report that it works perfectly (without loss of data).
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
echo92 said:
Good luck with flashing - also, might be worth flashing the logo.bin too, so your flashing list would look more like (if including the gpt and bootloader):
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
Click to expand...
Click to collapse
I just finished the flashing process, and it's all ok, everything works good now. thanks for helping me!

moonlightdrive said:
EDIT:
I report that it works perfectly (without loss of data).
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
Good luck with flashing - also, might be worth flashing the logo.bin too, so your flashing list would look more like (if including the gpt and bootloader):
I just finished the flashing process, and it's all ok, everything works good now. thanks for helping me!
Click to expand...
Click to collapse
Cool, will add it to the OP that it works fine on xt1641

How does one know which variants the referenced stock ROM applies to? I'm supposing it's any phone that lists NPJS25.93-14-4 under build number. Also, is this an official build direct from Motorola?

flroots said:
How does one know which variants the referenced stock ROM applies to? I'm supposing it's any phone that lists NPJS25.93-14-4 under build number. Also, is this an official build direct from Motorola?
Click to expand...
Click to collapse
Yes the ROM is officially signed by moto. Initial upload was done by the Moto Firmware team. It is confirmed to work on XT1641 and XT1643. Just like the Dec 1 Security firmware, this should probably work on the xt164* devices, as long they are retail versions. :good:
I will ask more people to try the same. :good:

A .bat file for commands would be really great..ease of use !
Thanks !

Sharp404 said:
A .bat file for commands would be really great..ease of use !
Thanks !
Click to expand...
Click to collapse
A zip containing the bat files has been attached to the OP. :good:

Great Job
I am now back to stock thanks for creating the fastboot rom i was eagerly waiting for it thank u

Anyone try it on xt1621?
Enviado desde donde estoy ahora. ¿Que esperabas?

tywinlannister7 said:
Yes the ROM is officially signed by moto. Initial upload was done by the Moto Firmware team. It is confirmed to work on XT1641 and XT1643. Just like the Dec 1 Security firmware, this should probably work on the xt164* devices, as long they are retail versions. :good:
I will ask more people to try the same. :good:
Click to expand...
Click to collapse
Can confirm it works on XT1640

Fede79 said:
Anyone try it on xt1621?
Enviado desde donde estoy ahora. ¿Que esperabas?
Click to expand...
Click to collapse
I dit, it works fine!
---------- Post added at 05:32 PM ---------- Previous post was at 05:31 PM ----------
It is laggy, am i the only one?????
It only happens when i flash the firmware from PC!
When i install marshmallow and i updated to Nougat it worked so smooth. What could be the problem?

Is this rom compatible with XT1626? If yes: can anyone share a screenshot with system infos? Thanks in advance.

At first thanks to tywinlannister7.
Anyone tried the rom on the XT1622?

where is the files OEM Flash" file; "OEM Lock" file. ???????

diegomartinezlovey said:
where is the files OEM Flash" file; "OEM Lock" file. ???????
Click to expand...
Click to collapse
Check the attachment in the OP.

Moto X Play India & Brazil Official Final Firmware 7.1.1 (Fastboot Files)

I have tried the Indian Version and is working completely fine
If you can't download files from Motorola cloud then try using a VPN.
Indian Version
Motorola Cloud
Mega
Github
Drive
Brazilian Version
Motorola Cloud
AndroidFileHost
Mega
Github
If you don't know how to flash this files go to : How to Flash Fastboot files
To completely relock the bootloader use the below commands
Code:
fastboot oem fb_mode_set
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot oem fb_mode_clear
fastboot reboot
ALWAYS CHECK YOUR MODEL
FLASHING WRONG FIRMWARE CAN DESTROY A PHONE​
Thanks to Rickk (Japa) and kumeipark for the links

dheerajz said:
I have tried the Indian Version and is working completely fine
Hey, I am getting Access Denied while downloading the Indian version.
Click to expand...
Click to collapse

dheerajz said:
I have tried the Indian Version and is working completely fine
Indian Version
Brazilian Version​
If you don't know how to flash this files go to : How to Flash Fastboot files
To completely relock the bootloader use the below commands
Code:
fastboot oem fb_mode_set
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot oem fb_mode_clear
fastboot reboot
ALWAYS CHECK YOUR MODEL
FLASHING WRONG FIRMWARE CAN DESTROY A PHONE​
Thanks to Rickk (Japa) for the links
Click to expand...
Click to collapse
Getting access denied issue.
Can you post a mega or google drive link for the fastboot files.

Seems they verify the IP of client and give access depends on region. Maybe some proxy help.

Indian version link is not working

Uploading Indian Version: 1 Hr. left!

kumeipark said:
Uploading Indian Version: 1 Hr. left!
Click to expand...
Click to collapse
Is it same as above link
---------- Post added at 09:17 AM ---------- Previous post was at 09:15 AM ----------
dheerajz said:
I have tried the Indian Version and is working completely fine
If you can't download files from Motorola cloud then try using a VPN.
Indian Version
Motorola Cloud
Adding more Links
Brazilian Version
Motorola Cloud
AndroidFileHost
Mega
If you don't know how to flash this files go to : How to Flash Fastboot files
To completely relock the bootloader use the below commands
ALWAYS CHECK YOUR MODEL
FLASHING WRONG FIRMWARE CAN DESTROY A PHONE
Thanks to Rickk (Japa) for the links
Click to expand...
Click to collapse
Can I just flash these files through twrp

ssmmod293 said:
Is it same as above link
Click to expand...
Click to collapse
Untouched Version (Same as above)

Anyone who flashed the Indian Version Firmwire from Stock unlocked bootloader 6.0.1 ?
Can you post detailed step by step for installing this.
I mean there is a bigger risk in bricking through fast boot than TWRP . So a detailed step by step guide will be so useful.
TIA

XT1562 India Mirror:
https://mega.nz/#!ilBzhQCa!Sonpj4GZinqOIf3NcQldFK8nf9ZBz6iUAvh6OkNYq84
https://github.com/motoxplay/stock/...PD26.48-24-1_cid7_subsidy-DEFAULT_CFC.xml.zip
https://drive.google.com/open?id=0Bz08OrxbxDBsQVp6d1VHaUZhV1k
XT1563 Brazil Mirror:
https://github.com/motoxplay/stock/...D26.48-24-1_cid12_subsidy-DEFAULT_CFC.xml.zip

nishantmor_27 said:
dheerajz said:
I have tried the Indian Version and is working completely fine
Hey, I am getting Access Denied while downloading the Indian version.
Click to expand...
Click to collapse
Working for me If you guys want I can upload it to new link
Click to expand...
Click to collapse

ssmmod293 said:
Is it same as above link
---------- Post added at 09:17 AM ---------- Previous post was at 09:15 AM ----------
Can I just flash these files through twrp
Click to expand...
Click to collapse
Never sir. You have to used PC or laptop.

dheerajz said:
To completely relock the bootloader use the below commands[/SIZE]
Code:
fastboot oem fb_mode_set
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot oem fb_mode_clear
fastboot reboot
ALWAYS CHECK YOUR MODEL
FLASHING WRONG FIRMWARE CAN DESTROY A PHONE​
Thanks to Rickk (Japa) for the links
Click to expand...
Click to collapse
Why do we need commands to relock bootloader ? Does this unlock the bootloader ?

swaggy123 said:
Why do we need commands to relock bootloader ? Does this unlock the bootloader ?
Click to expand...
Click to collapse
This commands are for those who have an unlocked bootloader and want to relock the bootloader

swaggy123 said:
Why do we need commands to relock bootloader ? Does this unlock the bootloader ?
Click to expand...
Click to collapse
Not bootloader relock. Its oem lock.
---------- Post added at 05:34 PM ---------- Previous post was at 05:32 PM ----------
dheerajz said:
I have tried the Indian Version and is working completely fine
If you can't download files from Motorola cloud then try using a VPN.
Indian Version
Motorola Cloud
Adding more Links
Brazilian Version
Motorola Cloud
AndroidFileHost
Mega
If you don't know how to flash this files go to : How to Flash Fastboot files
To completely relock the bootloader use the below commands
Code:
fastboot oem fb_mode_set
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot oem fb_mode_clear
fastboot reboot
ALWAYS CHECK YOUR MODEL
FLASHING WRONG FIRMWARE CAN DESTROY A PHONE​
Thanks to Rickk (Japa) for the links
Click to expand...
Click to collapse
Brazil ROM have 7 system .image. Cmd should add one more command

dheerajz said:
I have tried the Indian Version and is working completely fine
Click to expand...
Click to collapse
Thank you so much.. was waiting for this from a long time..

Can anyone confirm that by going this method does the playstore is certified or not because I went by another method from another post by restoring backup image provided

ok, thanksssss!!!!

ssmmod293 said:
Can anyone confirm that by going this method does the playstore is certified or not because I went by another method from another post by restoring backup image provided
Click to expand...
Click to collapse
YES it shows certified on playstore

thuybang said:
not bootloader relock. Its oem lock.
---------- post added at 05:34 pm ---------- previous post was at 05:32 pm ----------
brazil rom have 7 system .image. Cmd should add one more command
Click to expand...
Click to collapse
thanks updating op

Manually update Z3 Play to Pie

Story: I bought US version Z3 Play open market model from B&H. I could unlock the bootloader according to Motorola Developer site, but I encountered problem to root and I have struggled half day to make root done from booting TWRP to patching boot.img.
Eventually, I bit the bullet and make a step up to update to Pie bu downloading RETAIL ROM instead of RETUS. This time I patched the updated boot.img and I got success.
Prerequisite:
Full RETAIL Pie ROM
https://mirrors.lolinet.com/firmware/moto/beckham/official/RETAIL/
Bootloader unlocked
It's recommended to flash in Linux (I used Ubuntu) as I didn't have luck with Windows
Main battery should be full and supplied battery module should be at least 50% (you can charge battery module with 9V PD charger)
Some typing (all fastboot commands typed as ./fastboot)
Be aware some components will be flashed in b partition. Failure to do it will cause bootloop
./fastboot erase userdata is optional, but it is recommended to avoid unexpected trouble
Steps:
1. Download the Pie ROM and extract to somewhere you know (you can drag and drop the file into terminal window).
2. Copy the boot.img to the phone and let Magisk Manager to patch it, and copy the patched_boot.img to where you can locate.
3. Backup your personal data just in case
4. Prepare USB C cable
5. Enter bootloader. Turn the phone off, press and hold both volume down and power button together, and connect you phone to host computer. (You phone should show USB conmected)
6. Enter the following commands
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
Click to expand...
Click to collapse
7. After the phone has booted up, wait until it completed the update process. Now you have to go back to bootloader for rooting.
fastboot flash boot patched_boot.img
Click to expand...
Click to collapse
Booting process takes much longer, but it's one process until you update ROM and regain root again.
8. Run Magisk Manager to check root status
This is what I did to manually update to Pie and root it. Your milage may vary.
Good luck

Will this work on the amazon version?

CrimsonSaber5G said:
Will this work on the amazon version?
Click to expand...
Click to collapse
If the bootloader can be unlocked, it's likely

Will this still allow you to get OTAs or will it break it?

crazyjimbo said:
Will this still allow you to get OTAs or will it break it?
Click to expand...
Click to collapse
I used to flash stock on my rooted z3play, then take the OTA . For some reason that's not possible anymore. I really need the latest OTA to sideload it. I tried many different roms 8.1 and 9.0