Related
HI FRIENDS TODAY I AM GOING TO GIVE FULL AND EXPLAINED TUTORIAL TO UNBRICK ANY LG MODEL ( NOT SUPPORTED BY JTAG,OCTOPUS BOX)
PROBLEM INTRODUCTION
NO DOWNLOAD MODE
NO RECOVERY MODE
NO FASTBOOT MODE
FASTBOOT MODE
LG LOGO STUCK
PC DETECT AS QHSUSB BULK
PARTITION POP UP WHEN CONNECTED TO PC
SECURITY ERROR
KERNEL CRASH
NO SIGN OF LIFE
WHY MY PHONE BRICKED????????JUST FLASHING WRONG ROM ( MOST IN CASE OF REFURBISHED PHONE PURCHASED FROM THIRD PARTY SELLER)
FLASHING WRONG RECOVERY
FLASHING KERNEL
FLASHING KERNEL
DURING UPDATES ( FAILED OR INTERRUPTED)
AND MANY OTHER CAUSES
TOOLS REQUIREMENT LG FLASH TOOL FOR KDZ AND TOT FILE( http://forum.xda-developers.com/showthread.php?t=2432476(CREDIT GOES TO HYELTON)TOT OR KDZ FILE ( DEPENDING ON SITUATION) >>>>>>>>>>( KEEPING BOTH FILES RECOMMENDED)LG FIRMWARE EXTRACTOR ( http://forum.xda-developers.com/showthread.php?t=2600575) >>>>>>>>>>>> ( DOWNLOAD LATEST VERSION)
ANDROID SDK SLIM mod edit - malicious link removed) >>>>>>>>>>>> ( USEFULL TO UNBRICK PHONE IN FASTBOOT MODE)
QUALCOMM DRIVER ( http://www.mediafire.com/download/pba9wajnehr9qwg/Qualcomm+USB+Drivers.rar )>>>>>>>> ( for qhsusb bulk mode)
PDANET FOR ADB DRIVER ( http://pdanet.co/a/)
IF YOU FLASHED WRONG RECOVERY OR MODIFY PARTITION THEN YOU WILL STUCK IN FASTBOOT
SOLUTION FOR FASTBOOT
EXTRACT ANDROIDSDKSLIM.ZIP FILE ON DESKTOP ( ANY WHERE)
INSTALL PDANET AND CHOOSE LG COMPLETE INSTALLATION
DOWNLOAD PARTITION FILE FOR YOUR MODEL ( IF D802 THEN USE ONLY PARTITION FILE FOR D802) >>>>>>>>>> ( http://downloads.codefi.re/autoprime/LG/LG_G2)
NOTE : 1) YOU CAN EXTRACT PARTITION FILE FROM KDZ OR TOT FILE USING LGFIRMWARE EXTRACTOR TOOL
FOLLOW THIS VIDEO TO KNOW HOW TO EXTRACT PARTITION FILE
2) PARTITION FILE MUST BE IN .img FORMAT ( WHEN WE EXTRACT PARTITION FILE FROM KDZ OR TOT THEN IT IS IN .bin FORMAT SO SIMPLY RENAME FROM .bin to .img )
3) YOU NEED TO EXTRACT 10 FILES FROM TOT ( aboot, boot, sbl1, dbi, laf, recovery, modem, misc, rpm, tz ) and 9 FILES FROM KDZ ( misc file is not present in kdz so dont worry it is not important)
AFTER EXTRACTING PARTITION FILE AND RENAMING THEM YOU WILL GET 10 OR 9 FILE ( aboo.img, boot.img, laf.img, recovery.img, sbl1.img, dbi.img, rpm.img, tz.img, misc.img) and REMOVE ANY NUMBER FROM THE NAME OF FILES ( SUPPOSE YOU GET aboot_21345.bin THEN RENAME TO aboot.img)
NOW COPY THESE PARTITION FILE IN THE LAST FOLDER (PLATFORM-TOOLS) OF ANDROIDSDKSLIM FOLDER.
NOW CONNECT YOUR PHONE TO PC IN FASTBOOT MODE ( OPEN DEVICE MANAGER AND SEE ON THE TOP THERE WILL ANDROID ADB INTERFACE UNDER ANDROID PHONE. IF NOT THEN CHECK ADB DRIVER INSTALLED PROPERLY OR NOT.
NOW GO TO THE THE FOLDER PLATFORM -TOOL INSIDE ANDROIDSDKSLIM FOLDER.
NOW PRESS AND HOLD SHIFT BUTTON ON KEYBOARD AND RIGHT CLICK IN THAT FOLDER AND YOU WILL GET AN OPTION OPEN COMMAND PROMPT OR WINDOW HERE. CLICK ON IT AND YOU WILL GET CMD WINDOW.
NOW TYPE fastboot devices ( IT WILL SHOW YOUR DEVICES )
NOW TYPE THESE COMMAND
fastboot erase recovery
fastboot erase laf
fastboot flash laf laf.img
fastboot reboot
exitNOW REMOVE USB CABLE AND SWITCH OFF YOUR PHONE BT LONG PRESSING POWER BUTTON
NOW PRESS AND HOLD VOL UP AND CONNECT TO PC AND YOU WILL GET DOWNLOAD MODE FIXED
HURREYYYYYYYYYYYYYY
GO AND FLASH STOCK ROM ( http://forum.xda-developers.com/showthread.php?t=2432476)
IF YOU STILL STUCK IN FASTBOOT MODE THEN TYPE THESE COMMAND ( erase all 10 or 9 file and flash them one by one as shown)
fastboot erase aboot ( this command will erase aboot.img from phone)
fastboot flash aboot aboot.img ( this command will flash aboot to phone )
fastboot erase boot
fastboot flash boot boot.img
fastboot erase laf
fastboot flash laf laf.img
fastboot erase rpm
fastboot flash rpm rpm.img
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot erase modem
fastboot flash modem modem.img
fastboot erase misc
fastboot flash misc misc.img
fastboot erase sbl1
fastboot flash sbl1 sbl1.img
fastboot erase tz
fastboot flash tz tz.img
fastboot erase dbi
fastboot flash dbi dbi.img
fastboot reboot
exitNOW REMOVE USB CABLE AND SWITCH OFF YOUR PHONE BT LONG PRESSING POWER BUTTON
NOW PRESS AND HOLD VOL UP AND CONNECT TO PC AND YOU WILL GET DOWNLOAD MODE FIXED
HURREYYYYYYYYYYYYYY
GO AND FLASH STOCK ROM ( http://forum.xda-developers.com/showthread.php?t=2432476)
SOLUTION FOR ALL THE PROBLEM WITH NO DOWNLOAD MODEYOU NEED TO FORCE PHONE INTO QHSUSB BULK MODE BY SHORTING TEST POINT
WHEN YOU GET QHSUSB BULK MODE IN DEVICE MANAGER THEN INSTALL QUALCOMM DRIVER ( http://www.mediafire.com/download/pba9wajnehr9qwg/Qualcomm+USB+Drivers.rar)
NOTE : THERE ARE TWO MODE IN QHSUSB BULK
1) QUALCOMM HS-USB 9006
THIS MODE IS VERY EASY TO FIX. YOU NEED THE PARTITION FILE THAT WE GET IN THE STARTING TO SOLVE FASTBOOT MODE)
TO SOLVE 9006 FOLLOW THIS METHOD ( http://forum.xda-developers.com/showthread.php?t=2582142 )
UBUNTU METHOD IS UNIVERSAL IT CAN BE USED FOR ANY PHONE IN 9006 ( UNBRICK VERY PARTITION METHOD ( http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627) BY TUNG KICK IS ONLY FOR G2 HOWEVER IT CAN BE USED FOR GPRO2 AND G FLEX BUT I M NOT SURE IT MAY NOT WORK OR BRICKED MORE)
WHEN YOUR PHONE GET STUCK IN 9006 THEN LOTS OFF DRIVE POP UP WHEN CONNECTED TO PC ( MOST IMPORTANT IDENTIFICATION)
2 ) QUALCOMM HS-USB 9008
IF YOU STUCK IN 9008 THEN THIS IS THE SUPER HARD BRICK MODE.
CONTACT aftabalam8c2 ( http://forum.xda-developers.com/member.php?u=4554553 ) this guy not only can unbrick lg g2 , g3 but g pro 2, g flex, vu3, vu2, nexus4 , nexus 5, lg g , lg gpro, and around MORE THAN 30 ( I DONT KNOW BUT HE TOLD ME ALL HE CAN UNBRICK MORE THAN 50 ) devices of lg which not supported by JTAG OR OCTOPUS BOX.
ACCORDING TO HIM MOST USER DAMAGED DURING SHORTING OF TEST POINT ( SO BETTER TO ASK HIM BEFOR SHORT)
I NEVER SHORTED SO DONT ASK ME. HE ALSO MADE A SERIES OF TEST POINT ON YOU TUBE FOR MANY DEVICES BUT THESE VIDEO ARE NOT PUBLIC NOW. MAY BE HE MAKE ALL VIDEOS PRIVATE AFTER SOME GUY CHEATED HIM ON XDA ( CONCLUDED FROM HIS COMMENTS)
AND THE ACCOUNT OF THIS GUY DISABLED BY XDA FOR 1 WEEK ( I ASKED HIM PERSONALY ON WHATS APP)
SO IF YOU WANT THE TEST POINT FOR ANY PHONE ASK HIM.
THIS GUY UNBRICKED MY LG G FLEX IN 20 MINUTES IN FRONT OF ME ( WE ARE FROM SAME STATE SO I WENT HIS HOME)
FO THE FULL STORY OF LG G FLEX UNBRICKING SEE THIS ( http://forum.xda-developers.com/lg-...nload-mode-t3059257/post59555140#post59555140)
SO THE MOST IMPORTANT THING IS TO SHORT THE TEST POINT CORRECTLY WITHOUT DAMAGING EMMC ( I WOULD ADVICE ALL OF YOU PLEASE ASK HIM BEFOR SHORTING MAY HE SHARE THOSE VIDEOS ON YOU TUBE )
FOR COLLECTION OF TEST POINT SEE THIS ( http://forum.xda-developers.com/hardware-hacking/hardware/collection-test-phone-t3048736 )
SOLUTION FOR ERROR DURING FLASHINGFOLLOW THIS GUIDE ( http://forum.xda-developers.com/lg-g2/general/lg-g2-cross-dll-device-model-fota-laf-t3003717 )
THERE ARE MANY GUYS WHO CLAIM TO FIX YOUR BRICKED LG PHONE BUT I DONT KNOW THE AUTHENTICITY OF THESE GUYS
TUNGKICK WHICH IS ALSO WHO UNBRICK HAS VERY BAD RECORD, I SEEN THE POST MANY GUYS CLAIM THAT HE STEAL PASSWORD AND DATA FROM THEIR PC AND TOOL HE USED INSTALL KEYLOGGER TO YOUR PC ( I AM JUST TELLING THE COMMENTS ON GUYS AND THEY ALSO UPLOADED SOME PIC FOR THE PROOF)
THANKS SO MUCH
THREAD UNDER CONSTURCTION ( I WILL UPDATE PICTURE FOR MORE DETAILS )
to be continue..........
Hi Guys, pls help me.
This is not the first time i tried to update firmware using KDZUpdater [KDZ_FW_UPD.exe] .
But this is the first time my device has been bricked.
During updating my firmware, i was in "Emergency Mode" and i received some error on KDZUpdater GUI Console.
As i was unable to move from "Emergeny Mode", i tried again to update firmware, but again i got some error.
I thought removing the battery will do some good, but i was wrong.
Now my mobile is as good as "BLACK BRICK".
It even doesn't detect in "Device Manager".
Note:
Before using "KDZUpdater", i had disabled "LG modems" from device manager.
Pls help me on this.
Sent from my TCL J636D+ using XDA Free mobile app
vcforums said:
Hi Guys, pls help me.
This is not the first time i tried to update firmware using KDZUpdater [KDZ_FW_UPD.exe] .
But this is the first time my device has been bricked.
During updating my firmware, i was in "Emergency Mode" and i received some error on KDZUpdater GUI Console.
As i was unable to move from "Emergeny Mode", i tried again to update firmware, but again i got some error.
I thought removing the battery will do some good, but i was wrong.
Now my mobile is as good as "BLACK BRICK".
It even doesn't detect in "Device Manager".
Note:
Before using "KDZUpdater", i had disabled "LG modems" from device manager.
Pls help me on this.
Sent from my TCL J636D+ using XDA Free mobile app
Click to expand...
Click to collapse
You have only one option.
You need to force your phone into qhsusb bulk mode by shorting test point.
What does that mean??
Will this be done through software or I need some special hardware or should I sent to LG service centre.
Pls guide
Sent from my TCL J636D+ using XDA Free mobile app
vcforums said:
What does that mean??
Will this be done through software or I need some special hardware or should I sent to LG service centre.
Pls guide
Sent from my TCL J636D+ using XDA Free mobile app
Click to expand...
Click to collapse
You need to open your phone and do short of some pins.
A guys named aftabalam8c2 has full tutorial video how to do this.
And he will help u.
I m posting his contact details in pm
I have no download mode, but rom still works fine. cant root and cant start into recovery.
I solved the QHUSB 9006 Method in ubuntu, but after filling the partitions, all is like before, still NO download mode.....
Lg g3 f460s no download mode nor flashboot
I have lg g3 prime.
Lg g3 f460s from koria, sk telecom.
I want to install a custom rom, but it failed and i havent kept backup of stock rom, so first it shows " secure boot error" then i again go to fastboot mode and by mistake flash wrong file at boot partition & recovery partition.
After that when i switch on my phone it shows secure boot error & after it 's switched off.
When i press vol+ and insert in usb , download mode dialog comes and after 5 to 6 seconds it switch off automatically.
Not any key combination work for recovery mode & fastboot mode.
Means my phone have not download mode and not fastboot mode.
Now what should i do for unbrick it.
Don't support with lg l65 D280g?
friend you help me with D280g lg? help me pliz
I have the g pro 2 with no download mode just lg logo what should I do?
---------- Post added at 05:30 PM ---------- Previous post was at 05:28 PM ----------
SANJAYTHL said:
I have lg g3 prime.
Lg g3 f460s from koria, sk telecom.
I want to install a custom rom, but it failed and i havent kept backup of stock rom, so first it shows " secure boot error" then i again go to fastboot mode and by mistake flash wrong file at boot partition & recovery partition.
After that when i switch on my phone it shows secure boot error & after it 's switched off.
When i press vol+ and insert in usb , download mode dialog comes and after 5 to 6 seconds it switch off automatically.
Not any key combination work for recovery mode & fastboot mode.
Means my phone have not download mode and not fastboot mode.
Now what should i do for unbrick it.
Click to expand...
Click to collapse
Same here..have you found a fix yet?
daredavel said:
---------- Post added at 05:30 PM ---------- Previous post was at 05:28 PM ----------
Same here..have you found a fix yet?
Click to expand...
Click to collapse
got the solution but can't find the apropriate files, i am showing the method, if you find the files let me know.
1. with willcracker board diag,
in that case you need chipset file for apq8084 (snapdragon 805), i have searched to many but cant find. in that case you need original (latest on your phone) firmware in .tot file and convert it in .mbn file. this you can do in willcracker. only the problem is apq8084 chipset files and latest firmware in tot file. you can find it in .kdz but cant get it in .tot file.
2. with qpst programme. (qfil programe)
in this method you need programmer file, rawprogram.xml & patch.xml of the same version phone (f460s) and yes original firmware.
you can find both program on google or xda.
if you got the appropriate files let me know and share with me.
thanks in advance.
Help
Cannot unbrick ls996 in q-bulk mode. tried everything...every site. Even tried to contact member mentioned in post. Im willing to work hard to unbrick, NOT looking for easy way...out...but im no phone technican by all means. Thanks!!!
I've got a E975 (Optimus G Intl) to unbrick here.
I've got it to fastboot mode, but I can't get the laf.img and dbi.img files (they are not in the .kdz or .dz files).
Can anyone give me a help?
Wrong ROM install in LG f460s
SANJAYTHL said:
got the solution but can't find the apropriate files, i am showing the method, if you find the files let me know.
1. with willcracker board diag,
in that case you need chipset file for apq8084 (snapdragon 805), i have searched to many but cant find. in that case you need original (latest on your phone) firmware in .tot file and convert it in .mbn file. this you can do in willcracker. only the problem is apq8084 chipset files and latest firmware in tot file. you can find it in .kdz but cant get it in .tot file.
2. with qpst programme. (qfil programe)
in this method you need programmer file, rawprogram.xml & patch.xml of the same version phone (f460s) and yes original firmware.
you can find both program on google or xda.
if you got the appropriate files let me know and share with me.
thanks in advance.
Click to expand...
Click to collapse
I have same issue wrong ROM installed on LG f460s and I have no download mode, no recovery, no fastboot no charging shown, no sign of life, just Qualcomm HS-USB QDLoad 9008 is shown in device manager when connect to PC.. I am searching APQ8084 folder to paste in boarddiag tool, Dear if you have found any other way to solve this issue please let me know. thanx in advance
power outage while flashing kdz on LG C660
Please help... I know my phone is a little outdated but I would still love use it for my daily routine . I'm in the middle of flashing the original firmware when the power outage happened. Now it won't power on at all. Been searching for days on what pins/components to short to force it into qhsusb bulk mode but no luck. I hope someone can help me...:crying:
tobitab said:
Please help... I know my phone is a little outdated but I would still love use it for my daily routine . I'm in the middle of flashing the original firmware when the power outage happened. Now it won't power on at all. Been searching for days on what pins/components to short to force it into qhsusb bulk mode but no luck. I hope someone can help me...:crying:
Click to expand...
Click to collapse
Which phone??
Anyone there" help me" i hav bricked my lg g2 f320k" wenever i connect my phone to pc" lots of partitions comes up
superguy19 said:
Which phone??
Click to expand...
Click to collapse
My phone is LG Optimus Pro C660...
---------- Post added at 01:32 PM ---------- Previous post was at 01:18 PM ----------
superguy19 said:
Which phone??
Click to expand...
Click to collapse
Ajayz said:
Anyone there" help me" i hav bricked my lg g2 f320k" wenever i connect my phone to pc" lots of partitions comes up
Click to expand...
Click to collapse
Have you tried checking on the 'Device Manager' what mode is the phone in 'Ports' section when connected to pc?
After that there are instructions in the first page for every mode. My phone doesn't show up and I needed it to force into
qhsusb bulk mode in order to proceed...
Bricked LG H440n
Hello guys I have bricked my LG H440n in an attempt of unlocking the bootloader. My phone doesn't get recognised by pc, I can only enter fastboot mode, but command like "fastboot erase aboot" are not working, it just says remote: "unknown command". Can anyone help me where can I find the pins to short on this phone?
Hello!
I would like to ask some help with my hard bricked G3 D855 16GB, i installed wrong rom
My english is not a best, and i dont dare to do anything. I have win 8.1. I dont know about Linux, and virtual PC.
I will very glad that someone can help me maybe via teamviewer. I also donate You. Please
If you think that You can help me maybe, please write me.
Its now Complete 18 days Yureka Plus Hardbricked Just HS-USB qdloader In Device Manager And nothing more.
1. Flash using 32gb Micro sd card by extracting the Emmc Image on Micro sd card :- Failed
2.QPST qfil Image Loader : - Sahara Download Fail Firehose Fail System Exeption
3.MIflash tool :- Flash File Fail
4. Qualcomm flash tool :- Device is in Download Mode Not in Diagnostic Hence Failed
5. Visiting Authorised service Center They just Said WE have to Change the Motherboard . :-- didnt Said yes If yes Then It will be success but Cost Is 5,500 rupee And On Flipkart A new Yureka/Yureka plus Is @6,500 so Why should i do that For a mother board Replacement
I dont Think any method Left Or if any please guys Help Me . using Windows 8.1 In TEST MODE driver signature Disabled Succesfully Everything Done well Device detect Qualcomm HS-USB QDLoader . but Didnt Flash YGDP tool Also Failed Fastboot Adb Commands Flahses my Device But After The Flash Done my Phone Didnt Reboot just Stays There in Fastboot With Random Coloured Lines.
Kaushal Mehra said:
Its now Complete 18 days Yureka Plus Hardbricked Just HS-USB qdloader In Device Manager And nothing more.
1. Flash using 32gb Micro sd card by extracting the Emmc Image on Micro sd card :- Failed
2.QPST qfil Image Loader : - Sahara Download Fail Firehose Fail System Exeption
3.MIflash tool :- Flash File Fail
4. Qualcomm flash tool :- Device is in Download Mode Not in Diagnostic Hence Failed
5. Visiting Authorised service Center They just Said WE have to Change the Motherboard . :-- didnt Said yes If yes Then It will be success but Cost Is 5,500 rupee And On Flipkart A new Yureka/Yureka plus Is @6,500 so Why should i do that For a mother board Replacement
I dont Think any method Left Or if any please guys Help Me . using Windows 8.1 In TEST MODE driver signature Disabled Succesfully Everything Done well Device detect Qualcomm HS-USB QDLoader . but Didnt Flash YGDP tool Also Failed Fastboot Adb Commands Flahses my Device But After The Flash Done my Phone Didnt Reboot just Stays There in Fastboot With Random Coloured Lines.
Click to expand...
Click to collapse
Hello,
I see you posted your query here https://forum.xda-developers.com/general/help/yureka-plus-hardbricked-fastboot-t3527482, this one seems a duplicate.
I am closing this thread.
Good luck!
Regards
Vatsal,
Forum Moderator.
does any one know a detailed methord to unbrick... a Hard bricked device....
it got hard Bricked while flashing stock miui....
I can not get into fastboot mode...
Hard Bricked.....
your device have a red blinking LED?
can your computer / laptop detect your phone?
if yes
do a fastboot again... , or do it 1 by 1
"Fastboot flash system system.img" and so on
We can't kill qualcomm devices...They can be saved from any stage...Use Qfil to flash(if fastboot mode is not working)...
mi 4i does not boot up
My mi 4i does not boot up does not going to fast boot when i connect it to pc no charging symbol bt pc showd usb device doesnot recognise code 43
Install mi4i Qualcomm drivers and flash using latest miflash tool.
Flash tool will recognize the device as com 10 or com 30 or something like that
Sharath007 said:
We can't kill qualcomm devices...They can be saved from any stage...Use Qfil to flash(if fastboot mode is not working)...
Click to expand...
Click to collapse
hello
I have a bricked Mi4i I am trying to restore, can u help me with the steps required to use Qfil; as in what files to download and stuff like that? I downloaded the QFIL, installed the drivers( my phone shows up in Device Manage>Port>Qualcomm HS-USB Diagnostics 9006)
Thank you for your help.
faizauthar12 said:
your device have a red blinking LED?
can your computer / laptop detect your phone?
if yes
do a fastboot again... , or do it 1 by 1
"Fastboot flash system system.img" and so on
Click to expand...
Click to collapse
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
faizauthar12 said:
your device have a red blinking LED?
can your computer / laptop detect your phone?
if yes
do a fastboot again... , or do it 1 by 1
"Fastboot flash system system.img" and so on
Click to expand...
Click to collapse
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
reganEZ said:
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
Click to expand...
Click to collapse
flash your phone with fastboot ROM by usign Xiaomi Mi flash tools
reganEZ said:
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
Click to expand...
Click to collapse
Happened for me once. Refer this
http://en.miui.com/forum.php?mod=viewthread&tid=474376&mobile=2
You can find videos on QPST in YouTube.
faizauthar12 said:
flash your phone with fastboot ROM by usign Xiaomi Mi flash tools
Click to expand...
Click to collapse
When i try that, the phone is detected as 12345...and then the status bar reaches 100% but nothing else happens. How long does it take for it to flash? any particular miflash tools version or ROM versions?
Thank you
---------- Post added at 12:39 PM ---------- Previous post was at 11:53 AM ----------
Sharath007 said:
Happened for me once. Refer this
http://en.miui.com/forum.php?mod=viewthread&tid=474376&mobile=2
You can find videos on QPST in YouTube.
Click to expand...
Click to collapse
When i try the QFIL method, it says "cant switch to EDL mode or something"
Any help?
Thanks in advance
here is the screenshot btw
reganEZ said:
here is the screenshot btw
Click to expand...
Click to collapse
Seems like you are flashing Android lollipop. Have you tried flashing miui 8 or 9 on Android M using miflash.
Also use old miflash tool, to avoid any compatibility issues.
Sharath007 said:
Seems like you are flashing Android lollipop. Have you tried flashing miui 8 or 9 on Android M using miflash.
Also use old miflash tool, to avoid any compatibility issues.
Click to expand...
Click to collapse
Ok I will try that too. When u say old miflash which version wud u recommend?
reganEZ said:
Ok I will try that too. When u say old miflash which version wud u recommend?
Click to expand...
Click to collapse
Miui 8 or 9 fastboot rom contains repair scripts as well. When you flash them, it should solve issues if any.
Use any of 2015 year releases like
MiFlash 2015.06.01.0
Load all files properly and also use flash all while flashing. It should work.
Sharath007 said:
Miui 8 or 9 fastboot rom contains repair scripts as well. When you flash them, it should solve issues if any.
Use any of 2015 year releases like
MiFlash 2015.06.01.0
Load all files properly and also use flash all while flashing. It should work.
Click to expand...
Click to collapse
I tried this too. it takes about 114 seconds and says operation completed successfully but the phone wont still boot up
reganEZ said:
I tried this too. it takes about 114 seconds and says operation completed successfully but the phone wont still boot up
Click to expand...
Click to collapse
For final attempts ...
1.Use different usb cable and try or other desktop.
2. Connect phone by press and holding vol up and vol down and power buttons , wait until you hear sound and then flash . If no use, try different combinations like holding volume up alone
3. Use QPST method for flashing(this is how i unbricked my mobile after flashing wrong bootloader)
Try flashing MIUI fastboot ROM using "command prompt", instead of Mi flastool, you can find the procedure of it on miui forum..
Hello XDA-Team and all others who read this.
I got an Nokia 3 from Friend who killed Device trying to Flash TWRP and Root Phone ...
The Phone can only be "Powered On" by pressing Vol Up & Power for a few seconds. After this the phone will only vibrate after each 10 seconds - i think its trying to boot but fails and then try again ... until battery will powered down and needs recharge (with no displaying charging status)
Under Windows - Device Manager - the conected phone will change in each loop cycle between the following stats :
1. PreLoader USB VCOM Port (COM3) - 2. MTK USB Port (COM4) - 3. MTK USB Port (COM4) - and then vibrate and start again
... so i think the PreLoader is bricked - first because i've read that these PreLoader will loaded first after PowerOn - like a BIOS on any Mainboard
I've tryed any solution i found on the web - mostly on xda - incl. OST LA Tool, SP Flash Tool and others ... so i've noticed some "error messages" from SP Flash Tool and also that an trying to Flash with SP Flash Tool stops the boot-vibrate-loop
Is there any solution to manually Reflash original Firmware or repair the PreLoader ???
I know older Nokia Phones can be "Reflashed" by using an self builded USB-OTG "Y-Cable" with the following configuration: Side A : USB-A plug to connect to usb power plug (or computer) - Side B: micro-USB Plug to connect phone - Side C: USB-A female to connect USB-Stick with the needed Firmware Image File (on older nokia phones it will be an NB0-File i know) ... i also know you must first put the USB-Stick with File via the cable to the OFF-POWERED Phone and then put the USB-A plug into Power and wait until the "Update Procedure" will be finished - most under 30 minutes
So, if the will be an idea or solution to fix this "Error" PLZ HELP
M4RCJO said:
Hello XDA-Team and all others who read this.
I got an Nokia 3 from Friend who killed Device trying to Flash TWRP and Root Phone ...
The Phone can only be "Powered On" by pressing Vol Up & Power for a few seconds. After this the phone will only vibrate after each 10 seconds - i think its trying to boot but fails and then try again ... until battery will powered down and needs recharge (with no displaying charging status)
Under Windows - Device Manager - the conected phone will change in each loop cycle between the following stats :
1. PreLoader USB VCOM Port (COM3) - 2. MTK USB Port (COM4) - 3. MTK USB Port (COM4) - and then vibrate and start again
... so i think the PreLoader is bricked - first because i've read that these PreLoader will loaded first after PowerOn - like a BIOS on any Mainboard
I've tryed any solution i found on the web - mostly on xda - incl. OST LA Tool, SP Flash Tool and others ... so i've noticed some "error messages" from SP Flash Tool and also that an trying to Flash with SP Flash Tool stops the boot-vibrate-loop
Is there any solution to manually Reflash original Firmware or repair the PreLoader ???
I know older Nokia Phones can be "Reflashed" by using an self builded USB-OTG "Y-Cable" with the following configuration: Side A : USB-A plug to connect to usb power plug (or computer) - Side B: micro-USB Plug to connect phone - Side C: USB-A female to connect USB-Stick with the needed Firmware Image File (on older nokia phones it will be an NB0-File i know) ... i also know you must first put the USB-Stick with File via the cable to the OFF-POWERED Phone and then put the USB-A plug into Power and wait until the "Update Procedure" will be finished - most under 30 minutes
So, if the will be an idea or solution to fix this "Error" PLZ HELP
Click to expand...
Click to collapse
OST LA is easiest method to flash firmware. Can it boot to fastboot mode?
SkaboXD said:
OST LA is easiest method to flash firmware. Can it boot to fastboot mode?
Click to expand...
Click to collapse
Nope ... it will only vibrate at each 10 seconds ... display are still blank / black / noting happens on it :/
M4RCJO said:
Nope ... it will only vibrate at each 10 seconds ... display are still blank / black / noting happens on it :/
Click to expand...
Click to collapse
Daymm, idk then, that's a big problem
cant run nokia 3
I have the same problem just that vibrate each 5 seconde witha black screen any help please
I have the same Problem. Unresponsive, black screen, vibrating every ~10 seconds. No button presses lead to a change in behaviour
Same to you ,caz I erased the preloader partition,so now got the only vibrating phone,XD, yeah, it's hard bricked.
Sent from my SM-G950F using Tapatalk
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
haumich_blau said:
I have the same Problem. Unresponsive, black screen, vibrating every ~10 seconds. No button presses lead to a change in behaviour
Click to expand...
Click to collapse
Hard bricked
Sent from my SM-G950F using Tapatalk
---------- Post added at 08:03 PM ---------- Previous post was at 08:02 PM ----------
mediafire007 said:
Same to you ,caz I erased the preloader partition,so now got the only vibrating phone,XD, yeah, it's hard bricked.
Sent from my SM-G950F using Tapatalk
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
Hard bricked
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
Do not erase the preloader, it's very important or you will kill the phone.
Sent from my SM-G950F using Tapatalk
i extracted preloader.bin from 7.1.1 december security patch, is it there a way to somehow flash it?
Hi there, I don't have much time to explain in details now, but Ive been able to unbrick my Nokia 3 from this state by using SF flashtool with emergency mode and a rom version that I found around. It gave it life back.
After that I've been able to boot into fastboot mode and I flashed the boot.img and system.img (and not sure for the cache.img) using the fastboot commands. These IMG files were taken from a full rom update.zip (android 7.0 that I found around). I t removed root and if I well remember, the bootloader was relocked (not quite sure). After that, I could get the OTA updates (even Oreo beta).
I'll try to give more details (links to the correct ROMs, exact commands) later if you still struggle.
Hope this help anyway!
Cheers
Seem problem here, keeps vibration every now and then. But nothing shows up even ost la doen't recognise phone anymore.
Todrak, if you do have more details. I guess where all happy to hear it..
Loaded scatter file. Opened SP Flash Tools. Clicked download. Entered meta mode by pressing vol up + vol down + power on at the same time. Tried auth file, but it doesn't work.
So we stucked until we get proper auth file.
Guys, I UNBRICKED MY DEVICE! First you need to unpack stock nb0 rom with nb0 unpacker:
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
tnx to @heineken78
then you'll got all files that you need to flash with SP Flash Tool including scatter file. Load scatter file on SP Flash Tools and choose all partitions to flash (don't change, rename or move files from unpacked Stock ROM folder because SP Flash Tool will not recognize files).
then do this:
Max brackenz said:
# Download Nokia 3 supported Download agent file
# Now put it to the sp flashtool folder (replace with DA_SWSEC_CRYPTO20.bin)
# Run flash_tool.exe with administrator, and choose the Download-Agent I give you
# DONE
Download Agent https://mega.nz/#!xd8B3AJQ!PW82IpLzMzyNQk55BdwMnRMPlKQA0Yzj_8k_xN5r9XM
Click to expand...
Click to collapse
tnx to @Max brackenz
You don't need auth file. It requests auth file when you press all 3 buttons but if you enter meta mode propely, it will not ask for auth file.
You will have 3 options for flashing: Format All + Download, Firmware Upgrade and Download. Choose Download option.
Here you need to be fast.
Connect phone to computer. Click Download on SP Flash Tool. Disconnect USB cable. Enter META mode by pressing power on + volume up and quickly connect USB to PC at the same time.
Video example:
at 2:29
tnx to autor of this video.
Then it should start flashing process with red bar first (shortly) then with purple bar (shortly) and then with yellow bar. Wait for it to flash. Green circle/tick mark will appear if it's flashed successfully. It failed on 60 % for me but most importantly it flashed preloader.
Now reflash ROM with OST if you failed in half of process like me and you're good to go.
If it fails, try again. It didn't worked for me at first try.
SkaboXD said:
Guys, I UNBRICKED MY DEVICE! First you need to unpack stock nb0 rom with nb0 unpacker:
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
tnx to @heineken78
then you'll got all files that you need to flash with SP Flash Tool including scatter file. Load scatter file on SP Flash Tools and choose all partitions to flash (don't change, rename or move files from unpacked Stock ROM folder because SP Flash Tool will not recognize files).
then do this:
tnx to @Max brackenz
You don't need auth file. It requests auth file when you press all 3 buttons but if you enter meta mode propely, it will not ask for auth file.
You will have 3 options for flashing: Format All + Download, Firmware Upgrade and Download. Choose Download option.
Here you need to be fast.
Connect phone to computer. Click Download on SP Flash Tool. Disconnect USB cable. Enter META mode by pressing power on + volume up and quickly connect USB to PC at the same time.
Video example:
at 2:29
tnx to autor of this video.
Then it should start flashing process with red bar first (shortly) then with purple bar (shortly) and then with yellow bar. Wait for it to flash. Green circle/tick mark will appear if it's flashed successfully. It failed on 60 % for me but most importantly it flashed preloader.
Now reflash ROM with OST if you failed in half of process like me and you're good to go.
If it fails, try again. It didn't worked for me at first try.
Click to expand...
Click to collapse
you save my phone thnx bro you are really BOSS ♥
Riadh300 said:
you save my phone thnx bro you are really BOSS ♥
Click to expand...
Click to collapse
np bro, I'm always willing to help
SkaboXD said:
Guys, I UNBRICKED MY DEVICE! First you need to unpack stock nb0 rom with nb0 unpacker:
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
tnx to @heineken78
then you'll got all files that you need to flash with SP Flash Tool including scatter file. Load scatter file on SP Flash Tools and choose all partitions to flash (don't change, rename or move files from unpacked Stock ROM folder because SP Flash Tool will not recognize files).
then do this:
tnx to @Max brackenz
You don't need auth file. It requests auth file when you press all 3 buttons but if you enter meta mode propely, it will not ask for auth file.
You will have 3 options for flashing: Format All + Download, Firmware Upgrade and Download. Choose Download option.
Here you need to be fast.
Connect phone to computer. Click Download on SP Flash Tool. Disconnect USB cable. Enter META mode by pressing power on + volume up and quickly connect USB to PC at the same time.
Video example:
at 2:29
tnx to autor of this video.
Then it should start flashing process with red bar first (shortly) then with purple bar (shortly) and then with yellow bar. Wait for it to flash. Green circle/tick mark will appear if it's flashed successfully. It failed on 60 % for me but most importantly it flashed preloader.
Now reflash ROM with OST if you failed in half of process like me and you're good to go.
If it fails, try again. It didn't worked for me at first try.
Click to expand...
Click to collapse
Nice to hear:fingers-crossed:
SkaboXD said:
Guys, I UNBRICKED MY DEVICE! First you need to unpack stock nb0 rom with nb0 unpacker:
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
tnx to @heineken78
then you'll got all files that you need to flash with SP Flash Tool including scatter file. Load scatter file on SP Flash Tools and choose all partitions to flash (don't change, rename or move files from unpacked Stock ROM folder because SP Flash Tool will not recognize files).
then do this:
tnx to @Max brackenz
You don't need auth file. It requests auth file when you press all 3 buttons but if you enter meta mode propely, it will not ask for auth file.
You will have 3 options for flashing: Format All + Download, Firmware Upgrade and Download. Choose Download option.
Here you need to be fast.
Connect phone to computer. Click Download on SP Flash Tool. Disconnect USB cable. Enter META mode by pressing power on + volume up and quickly connect USB to PC at the same time.
Video example:
at 2:29
tnx to autor of this video.
Then it should start flashing process with red bar first (shortly) then with purple bar (shortly) and then with yellow bar. Wait for it to flash. Green circle/tick mark will appear if it's flashed successfully. It failed on 60 % for me but most importantly it flashed preloader.
Now reflash ROM with OST if you failed in half of process like me and you're good to go.
If it fails, try again. It didn't worked for me at first try.
Click to expand...
Click to collapse
thanks, you saved my phone, that works 100%.
please hellppp
Krahmati said:
thanks, you saved my phone, that works 100%.
Click to expand...
Click to collapse
i tried the manipulation it ask me authentification file pleaseeeee helllppp
f0lcan said:
i tried the manipulation it ask me authentification file pleaseeeee helllppp
Click to expand...
Click to collapse
hold power on + volume up buttons. If it asks asks for auth file try again
Hi, i dont know how, but guide from SkaboXD works... I unbrick my vibrate device and phone start works. Bud i had problem with bootloader and unlock him with fastboot... (when i confirm yes i´ll open the bootloader it was error 0x7000 or something like that. So, i started try another roms and flash. In some rom after failed download and format flash with SP Tool is brick to harder... When i connected now phone into computer isnt vibrate only it show in device manager (Mediatek Preloader USB VCOM port (COM6)) and now if i try to flash (only download) with SP TOOL it show error 5000 (auth file) or error 2005. While i write this. I dont think so, that its possible to unbrick my device but if somebody buy this phone to the root isnt right choise... Its problem phone... If somebody have some suggestion how can fix this i would like...
dont flash any nokia 3 mobile with sp flash tool it totally brick your phone. please give it to a phone shop if you want to change the version or any other problem. i bricked my phone with sp flash tool. it is harder to save my phone. now i gave it to a shop for repair i don't know they can fix problem or not.....
Hey there... I was trying to get my OnePlus 7 -That I just bought - to a rooted Android 10, updating was the easy part but while trying to "fastboot flash boot twrp.img" I think I somehow got myself stuck making the bootloader (aka fastboot mode ) as my main thing the phone load into and now when I turn on the phone it goes straight to fastboot mode I go and try to "fastboot flash boot twrp.img" it says OKAY twice but I can't load into recovery it takws me back to the fast boot again.... Idk what to do... Help
More into:
I got to the twrp before once during the process and idk why dumb me rebooted when I couldn't access my phone files from pc I wanted to put the image of OOS on a flash drive and via OTG but once I restarted by mistake after that whatever choice I make on the fastboot screen will quickly restart and get back to the same screen, so I can do "fastboot flash boot twrp.img" successfully but I can't load to it I hit reboot to recover or Start or Reboot Bootloader nothing takes me to twrp,
Also when I try "fastboot flash recovery twrp.img"
It says sending recovery okay, writing recovery failed, (remote: (recovery_b) no such partition)
I hope to get any help and I'm sorry if it's an obvious thing I couldn't notice, I'm not the sharpest between my brothers. Momma says. ? with me. I'll appreciate it I promise.
Have you tried this Fastboot ROMS?
Use this:
https://forum.xda-developers.com/oneplus-7/how-to/unbrick-tool-oneplus-7-msmtool-hydrogen-t3953240
After that just put offical Rom zip for your region on internal memory and after that install update. voila
Unbrick tool also available for OxygenOS pie https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325 :good:
Help
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
sourabhone said:
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
Click to expand...
Click to collapse
"sahara server" problem : disable driver signature / update drivers
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Qualcomm dr: https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
First of all twrp.img is a recovery image. You would normally use fastboot flash recovery twrp.img.
Secondly, you aren't supposed to flash twrp.img but use fastboot boot twrp.img and then boot to twrp and flash the twrp installer. If you can boot into fastboot, type fastboot boot twrp.img(twrp.70 for android q) and then flash twrp installer and oos. And if you can't boot into recovery you will have to use the msm tool.
daitalos said:
"sahara server" problem : disable driver signature / update drivers
Qualcomm dr:
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
Click to expand...
Click to collapse
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
sourabhone said:
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
Click to expand...
Click to collapse
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Thanks
daitalos said:
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : h t tp s: // forum . xda-developers . com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Click to expand...
Click to collapse
Thank you so much daitalos.
At last i was able to recover my phone from being a paperweight.Used my other laptop and it worked perfectly first time.Maybe my 1st laptop was having some issues.