[Completed] Stuck in bootloop - XDA Assist

For some reason I had to install xposed again because it wasn't working. It had a problem with unavailable device space?? so I changed the way of installation to sd-card and rebooted .
I am a beginner so I need a detailed method to get rid of the loop. This is also my 1st time asking for help here so please no disappointments
When I enter recovery mode this appears at the buttom:
did not match sized ' /system/csc/common/system/app/SamsungLB
S-5. 13. 17. 18E3086. 48E457B. apk' (No data available)
Phone: Samsung Galaxy Note 3 (SM-N900)
Custom rom: none
Rooted Phone: Yes. Abviously...
Android: 4.4
Custom recovery mode: none
Debugging: Not sure how to check that.
I also can't format the phone because it has valuable data that isn't backuped. If there is a way to copy it or back it up please let me know.
Thanks

OAAwara said:
For some reason I had to install xposed again because it wasn't working. It had a problem with unavailable device space?? so I changed the way of installation to sd-card and rebooted .
I am a beginner so I need a detailed method to get rid of the loop. This is also my 1st time asking for help here so please no disappointments
When I enter recovery mode this appears at the buttom:
did not match sized ' /system/csc/common/system/app/SamsungLB
S-5. 13. 17. 18E3086. 48E457B. apk' (No data available)
Phone: Samsung Galaxy Note 3 (SM-N900)
Custom rom: none
Rooted Phone: Yes. Abviously...
Android: 4.4
Custom recovery mode: none
Debugging: Not sure how to check that.
I also can't format the phone because it has valuable data that isn't backuped. If there is a way to copy it or back it up please let me know.
Thanks
Click to expand...
Click to collapse
Greetings ad welcome to assist. Isn't there an xposed unistaller zip you can flash ? If not the easiest way to fix your device is just odin stock and the reroot again
Good Luck
Sawdoctor

Related

[Q] ROM Help?

Model : Samsung Galaxy Fit S5670
Android Version : 2.3.4
Baseband Version : S5670XXKPG
Kernel Version : [email protected]#1
I'm rooted and i had updated my android version a few months back. Since then, i am unable to connect my phone to PC in USB Storage mode. When i click on the notification, nothing happens.... please help.
Also, i want to install cyanogenmod on my device. I found this ROM.
I wanted to know whether i can flash it directly or do i need to do some modifications. Also please tell me whether this process is reversible.
I dunno if this will help or not coz i m a newbie myself try going to settings>applications>development>and check "usb debugging" and "allow mock locations" hope this helps
doesnt help. i can only connect in mass storage mode when i open Samsung Kies.
Please give solutions to question # 2...
ty
lomash said:
Model : Samsung Galaxy Fit S5670
Android Version : 2.3.4
Baseband Version : S5670XXKPG
Kernel Version : [email protected]#1
I'm rooted and i had updated my android version a few months back. Since then, i am unable to connect my phone to PC in USB Storage mode. When i click on the notification, nothing happens.... please help.
Also, i want to install cyanogenmod on my device. I found this ROM.
I wanted to know whether i can flash it directly or do i need to do some modifications. Also please tell me whether this process is reversible.
Click to expand...
Click to collapse
Yes this process is absolutely Reversable....
all u need to do is Download the file 1a. Extract it somewhere on up pc. 2.Copy CyanogenMod-7 2(rc3).zip to ur sdcard. 2a. Reboot into Download mode(home volume down & power button) n flash CLOCKWORKMOD recovery by Tj style (http://forum.xda-developers.com/showthread.php?t=1339640) !! after ur done with this go to recovery mode again n flash that ROm from your sd card !! (dont forget to wipe data n cache before flashing) !!
if want to go back to stock GB.... U have to first flash KPI(which formats and flashes the device which is needed) then can flash any rom you want..... Happy FLASHING.....!!
do what Promit said and maybe if u flash a different rom your problem #1 maybe solved...

How to Root the Galaxy Note 3 SM-N9006 China Version - ONLY SM-N9006 Tutorial

Apparently there's a lot of people out there who bought the most international version of the Note3 in China: Galaxy Note 3 (China/WCDMA) SM-N9006. With scattered information on XDA and mostly information on the Chinese forums I thought I'd write up a quick rooting guide for all of the English speaking owners of this specific variant of the Note 3 phone.
WHY ROOT:
- Cause Stock Android nor the Samsung Experience isn't for everybody.
- The Samsung Galaxy Note 3 (China/WCDMA) SM-N9006 doesn't officially have Google Play, Gmail, and the essential lot of Google Services.
- I find a lot of Samsung bloatware reduction and battery / call quality / and other improvements from ROOTING an android phone.
- Great to have better control over your phone and most system related tweaking apps need ROOT.
- Besides, what's cooler than a newer custom built ROM?
>>> If you know of any solid Samsung Galaxy Note 3 SM-N9006 ROMS do share with others on the threads.
AM I ROOTED?:
Most likely no if you bought this phone from official sources. To check if your rooted use this app "Root Checker" its available on the Google Play market. If your on the stock android for the Samsung Galaxy Note 3 (China/WCDMA) SM-N9006 then you would need to look for some alternatives on its stock markets. After rooting your device you can use this same app to check if your rooted or not. If you follow these steps you should be rooted and have a much cooler experience with your Samsung Galaxy Note 3 SM-N9006 phone.
IS THERE A SAFER EASIER METHOD TO ROOT?
Yes, Mobile ODIN by @ChainfireXDA here: https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro I haven't tried it, as of me writing this our Note3 variant is not supported. The price may be worth it down the line when its added to the list.
DO YOU INCLUDE THE FILES NEEDED?
Yes, I have them attached in the post but put links in the guide as well.
CAN YOU SUMMARIZE YOUR PROCRESS?
It involves you installing CWM recovery for our devices via ODIN and flashing "CF-AutoRoot" through CWM recovery on your Samsung Galaxy Note 3 SM-N9006.
CREDITS:
Go to all the sites with URLS listed on this guide and excellent team of developers on XDA. Also the team over at http://www.ibtimes.co.uk/ and ZOL.com http://samsung.zol.com.cn/278/98_2772226.html for visual guide to the root progress as well.
WARNING
++++++++++
- This guide assumes that you have the following phone model for the Note 3, and only this one.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )
Go here to find out on how check your firmware for the Samsung Galaxy Note 3 China Version SM-N9006 and update it: http://androidjinni.com/update-galaxy-note-3-chinawcdma-n9006zcubmj3-android-4-3-2417/
- DO NOT try this guide in any other Android devices it will work only with Galaxy Note 3 (China/WCDMA) SM-N9006.
- Check your device model number in: Settings » General » About Device
- This guide assumes that you have a factory unlocked Samsung Galaxy Note 3 SM-N9006 ( most of you should already as mine came unlocked ).
- This guide assumes that you are willing to take the risk of flashing your phone, I do not take responsibility for the mistakes you will make nor loss of your data.
- Try this guide at your own risk. It is very unlikely that you will damage your device if you following the instructions properly. Please check that you followed the instructions before posting comments.
- This guide assumes that your going to backup your data prior to proceeding.
- This guide assumes you have access to a Windows XP (or above) PC. I have not rooted on virtualized software.
- This guide assumes that you are aware about the Flash Counter and Samsung Knox Warranty issue. This method is not safe (it will void your warranty status).
- Once your device is rooted you may not be able to receive any future OTA updates. You should be able to flash firmware updates manually by looking for them on official forums.
- I am not responsible for dead-links from the sites containing files needed for this guide. I do not take ownership of such files, credit goes to respective developers.
- This guide was written while I was having a few beers, some minor grammar and spelling mistakes to be expected.
- This guide assumes you chose "English" as the devices default language during setup...my instructions are in English and phone language is as well ( not that it makes any big difference ).
PRE-ROOTING
++++++++++
1. Make sure you have at least 90% battery life remaining ( I recommend you fully charge the phone though - old habits die hard ).
2. Enable Debugging mode for your for Samsung Galaxy Note 3 China Version SM-N9006 in: Settings » General » About Device . Now tap the Build Number seven times. You will see a count down notification and a "your now a developer" which enables the Developer Options. Now go to Settings » General » Developer Options » USB Debugging ( check the USB Debuggging checkbox ).
3. Make sure you have unchecked the "Reactivation Lock" setting in: Settings » General » Security » Reactivation Lock
4. Make sure you use a PC running Windows XP and above with the latest USB Drivers for Galaxy Note 3 SM-N9006. Get drivers and other ADB tools from here: http://forum.xda-developers.com/showthread.php?t=2038555 You can skip this step if you have KIES installed on your PC.
5. Make sure use the latest version of ODIN. Get the current on here: https://hotfile.com/dl/248246506/848df76/Odin3_v3.09.zip.html Save this file because you will need it in the rooting guide.
6. Make sure you have downloaded CWM recovery and do not extract the .tar file, you will need it for later. https://hotfile.com/dl/246835247/21b6180/n9006-cwm-recovery-6.0.3.7(0922).tar.html
7. Make sure you have downloaded "CF-AutoRoot", thanks to @ChainfireXDA here: http://download.chainfire.eu/360/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-h3gduosctc-smn9009.zip and copy it to the SD card of the phone.
8. Make sure you backup your data. Since the phone is new I'm sure you won't need anything but your phone logs and sms. Head over here for instructions: http://androidjinni.com/how-to-take-complete-backup-of-android-phone-505/ . There's plenty of apps on Google Play to backup your phone and sms logs. Samsung Kies also helps.
ROOTING STEPS: Samsung Galaxy Note 3 China Version SM-N9006
+++++++++++++
Step-1: Install the USB drivers for your Device from Point 4. above (I recommend you to have full admin rights when you install the .exe file) and test that your phone gets recognized when you plug it into your PC (you shouldn't get something like "driver failed"). You should be able to see the notification of a new device / drive if you were successful.
Step-2: Unzip the ODIN files from Point 5. above ( there should be a folder with an ODIN..exe file ) which you would need to copy to that folder and its files to your drive ( desktop would do ). Run the ODIN..exe file. It will not list any connected devices.
Step-3: Make sure you have backed data from your Samsung Galaxy Note 3 China Version SM-N9006 and you have at least 90% battery left. From this step you will be saying bye to your rooted phone state and possibly your important data.
Step-4: Turn off your Samsung Galaxy Note 3 China Version SM-N9006 and make sure its completely powered down.
Step-5: This part is a bit tricky for some people, you may need a try it several times. Its also a very crucial step. Make sure you have ODIN running on your PC. Place the Samsung Galaxy Note 3 in Download Mode by pressing and holding Volume Down and Power buttons together. A warning screen will appear, like the one below:
Now press the Volume Up button to continue to enter Download Mode. Don't worry about the screen looking like something is broke like below.
When the phone is connected successfully an Added message will appear under Odin. Also, ID: COM box in Odin will turn blue with COM port number, indicating successful connection.
Note: If the Added message does not come then try another USB port, try the one located at the back side of the computer. If Odin still fails to recognize the device then re-install USB driver.
Step-6: In Odin, click the PDA button and select the CWM recovery file with .tar extension from the location you on your pc you put it in.
Step-7: Make sure that on Odin the "Verify Auto Reboot" and "F.Reset Time" checkboxes are selected. Uncheck the "Re-Partition" option.
Step-8: When everything is set, click the Start button in Odin and wait for Odin to flash the custom recovery on your phone. DO NOT unplug your phone. Hopefully you see a green pass.
Step-9: Once the flashing process is completed, the phone will restart automatically. And soon a PASS message with green background will appear in the extreme-left box at the top of Odin indicating successful installation. Now unplug the USB cable from the Samsung Galaxy Note 3 SM-N9006 to disconnect it from the computer.
Step-10: Power off the Samsung Galaxy Note 3 and boot it into recovery mode by pressing and holding Volume Up and Power buttons together.
Step-11: In CWM recovery, select install zip from sdcard then select choose zip from sdcard. Navigate to the "CF-AutoRoot" zip file which was earlier copied to the SD card of the phone from Point.7 from the Pre-rooting section of this guide. Select it using the Power button and confirm installation
Step-12: Power off the Samsung Galaxy Note 3 and boot it into recovery mode by pressing and holding Volume Up and Power buttons together
Step-13: In CWM recovery, select install zip from sdcard then select choose zip from sdcard. Navigate to the SuperSU zip file which was earlier copied to the SD card of the phone. Select it using the Power button and confirm the installation.
Step-14: When the installation process is completed, return to the main recovery menu and reboot the phone by selecting "reboot system now"
Congratulations your Samsung Galaxy Note 3 SM-N9006 is now rooted. You can use the "Root Checker" app to verify this.
Looks like we can safely root this variant of the Note 3 without getting the Knox count :highfive:
Thanks to the devs @designgears & @Chainfire of the Root De La Vega [KNOX 0x0 Root - Lots of Versions - No Exynos]
Please choose the correct AP files and CSC files only for our phones, they should be:
AP Version: N9006ZCUBMJ3_VEGA.tar
CSC: N9006CHNBMJ3_CSC.tar.md5
Please head over to the link below for instructions and follow those directions precisely as described.:good:
http://forum.xda-developers.com/showthread.php?t=2479952
New Stock Firmware N9006ZCUBMI5
To check your AP and CP version Dial *#1234# (If SuperSU opens, press the back button)
SM-N9006 (China).
Build Date: 11.09.2013 -> Region: CHN (China) PDA: N9006ZCUBMI5 Changelist: 1590669 Android: 4.3 Download Link or Download Kernel
Credits to: @AdamLange
# WARNING
# DO NOT # Root using Kingo App or VROOT app, I just found out they have malware and XDA community is banning their threads until they find out what is going on.
# This applies to our SM-N9006 / Samsung Galaxy Note 3 N9006
From XDA
Kingo and vroot have been determined to be malware and unsafe for use, as such all threads will be closed and links removed. Thank you
I am currently following the discussion here: http://forum.xda-developers.com/showthread.php?p=46595305
I hope we can have an app similar to Kingo App working, I realize it will make easier for normal folks to root our Note 3 with 1 click ( which is super easier but has some security risks ).
Hello,
I can't apply your tutorial... I can't boot in to Download Mode. When I try, I arrives in a menu with this:
Select Boot Mode:
[VOLUME_UP to select. VOLUME_DOWN is OK.]
[Recovery Mode] <<==
[Fastboot Mode]
[Normal Boot]
I can move cursor to all three possibilties, but can't choose anyone. And, there is no "Download Mode".
Is there a tips to enter in Download Mode ? Otherwise ?
Thank you in advance
luisfigueira said:
Hello,
I can't apply your tutorial... I can't boot in to Download Mode. When I try, I arrives in a menu with this:
Select Boot Mode:
[VOLUME_UP to select. VOLUME_DOWN is OK.]
[Recovery Mode] <<==
[Fastboot Mode]
[Normal Boot]
I can move cursor to all three possibilties, but can't choose anyone. And, there is no "Download Mode".
Is there a tips to enter in Download Mode ? Otherwise ?
Thank you in advance
Click to expand...
Click to collapse
Strange its usually pretty simple, did you try doing this below? And is your phone SM-N9006? (sorry for asking a dumb question)
Place the Samsung Galaxy Note 3 in Download Mode by pressing and holding Volume Down and Power buttons together. A warning screen will appear...Now press the Volume Up button to continue to enter Download Mode. Don't worry about the screen looking like something is broke..
Click to expand...
Click to collapse
Thank you for your prompt answer.
Yes, I have:
Model:
SM-N9006
Build Number:
JSS15J.N9006ZCUBMI5
My phone came rooted but without CMW. I want install CMW to install Gapps 4.3
I'm agree with you, normally it's very easy and goes well, but this time, I don't know what happens... :crying:
Anyway, I'm happy that you try to help me !
(and sorry for my english, not always good ^^)
luisfigueira said:
Thank you for your prompt answer.
Yes, I have:
Model:
SM-N9006
Build Number:
JSS15J.N9006ZCUBMI5
My phone came rooted but without CMW. I want install CMW to install Gapps 4.3
I'm agree with you, normally it's very easy and goes well, but this time, I don't know what happens... :crying:
Anyway, I'm happy that you try to help me !
(and sorry for my english, not always good ^^)
Click to expand...
Click to collapse
Oh, your question is on installing CMW...my post is about rooting. There's instructions on this post: http://forum.xda-developers.com/showthread.php?t=2474697 which talks about Gapps for the N9006 and N9002
Let me know if that helps you
Hi,
Not working... I'm always blocked at screen:
Select Boot Mode:
[VOLUME_UP to select. VOLUME_DOWN is OK.]
[Recovery Mode] <<==
[Fastboot Mode]
[Normal Boot]
I tried to flash new firmware, or reflash same firmware, but SP Flash Tool doesn't detecte my phone
I think I read all tutorials in internet...
same here stuck at samsung logo cant enter download at recovery mode
same here stuck at samsung logo cant enter download at recovery mode
How to reflash
I have chinese Samsung Note3 named Kaswah.
Model:
SM-N9006
Build Number:
JDQ39.N9006ZCUBMHJ
First, I can't uncheck Reactivation Lock because there's not such an option in menu.
By pressing volume up + power button, I get the same menu mentioned above by luisfigueira. However scrolling to Recovery Mode and confirming gets me to see the construction Android robot and a triangle, which is one step before getting into Download Mode as mentioned in "How to update your Android device Firmware" . I am not allowed to post outside link here.
Afterwords pressing power button should get me into Download Mode. But nothing happens. I tried to connect to PC at the moment with running ODIN, but the phone wasn't recognised.
On the other side by pressing volume down + power button gets me to "Factory mode". I get tiny menu with 7 different items in left top corner. Everything in the menu is in chinese though. At the end of sixth item in menu is "e MMC". The only thing I can read. No clue what to choose or how to confirm.
Any help would be very appreciated since the phone is working "erratically". No data connection, despite label under battery saying 3G.
I think that reflashing would solve strange behavior, but first I need to know how to get there.
Hello there, i may wan to ask i not sure my clone phone is it from china. But when i go to the factory mode, it display all the chinese words. Can i use your firmware to root my phone? SM-N9006 N9006XXUAMF5 android 4.3 kernel 3.4.5
petokato said:
I have chinese Samsung Note3 named Kaswah.
Model:
SM-N9006
Build Number:
JDQ39.N9006ZCUBMHJ
First, I can't uncheck Reactivation Lock because there's not such an option in menu.
By pressing volume up + power button, I get the same menu mentioned above by luisfigueira. However scrolling to Recovery Mode and confirming gets me to see the construction Android robot and a triangle, which is one step before getting into Download Mode as mentioned in "How to update your Android device Firmware" . I am not allowed to post outside link here.
Afterwords pressing power button should get me into Download Mode. But nothing happens. I tried to connect to PC at the moment with running ODIN, but the phone wasn't recognised.
On the other side by pressing volume down + power button gets me to "Factory mode". I get tiny menu with 7 different items in left top corner. Everything in the menu is in chinese though. At the end of sixth item in menu is "e MMC". The only thing I can read. No clue what to choose or how to confirm.
Any help would be very appreciated since the phone is working "erratically". No data connection, despite label under battery saying 3G.
I think that reflashing would solve strange behavior, but first I need to know how to get there.
Click to expand...
Click to collapse
> Very strange, I have the Note 3 version and firmware displayed in my XDA signature. Reactivation Lock is in:
" Settings> General> Security > Reactivation Lock "
> You should be able to easily get into Download mode, its a bit tricky. I will try and post a better explanation when I get time.
> Flashing your phone via ODIN or KIES is simple, just find the firmware you need to flash specifically for this phone. Note you will void your warranty. I have posted a link to a recent firmware on here somewhere.
hausam said:
Hello there, i may wan to ask i not sure my clone phone is it from china. But when i go to the factory mode, it display all the chinese words. Can i use your firmware to root my phone? SM-N9006 N9006XXUAMF5 android 4.3 kernel 3.4.5
Click to expand...
Click to collapse
Note sure about this, I have rooted on: SM-N9006 / N9006ZCUBMJ3 and it looks like something is different with your firmware as others have reported issues with getting to "download mode" so do it at your own risk.
I mentioned:
WARNING
++++++++++
- This guide assumes that you have the following phone model for the Note 3, and only this one.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )
Attention rooters
I have rooted on: SM-N9006 / N9006ZCUBMJ3 and it looks like something is different with some firmware versions of N9006 as others have reported issues with getting to "download mode".
I have not tried rooting on other firmware variants of N9006.
I mentioned:
WARNING
++++++++++
- This guide assumes that you have the following phone model for the Note 3, and only this one.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )[/QUOTE]
1 Click Rooting SM-N9006 ( Warranty Safe )
As you all know KingoApp is still under investigation on XDA: http://forum.xda-developers.com/showthread.php?p=47158184 but I helped my friend root this N9006 model / info below and it works brilliantly!!!!! You get to keep all your apps, no flashing needed or download mode fiddling.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )
Just go to the KingoApp website, pick our phone model under Samsung N9006, download the app on your windows native machine ( I used Windows 8.1), run the app as "admin" and follow its instructions, that's all, really super awesomely simple I got my friend loving his Note3 rooted and laughing at my old method
I'm not promoting KingoApp, but I double checked on his phone after rooting with it. There was no strange Apps running on the background.
Earlier reports had pointed out some strange apps running on the background and rooting error messages pertaining to access permissions after installing KingoApp. But it looks like KingoApp has been updated because my friend's phone is clean. Zero permission errors and no strange background apps running.
Knox is 0x0, warranty is safe so that's good, he has not frozen or messed with any system apps yet (at least I didn't advise him to until a solid rom comes out).
My friend is Chinese of course, so if you don't mind all the warnings I'd like to say that you can use KingoApp but......like all things, at your own risk.:laugh:
michael1982t said:
As you all know KingoApp is still under investigation on XDA: http://forum.xda-developers.com/showthread.php?p=47158184 but I helped my friend root this N9006 model / info below and it works brilliantly!!!!! You get to keep all your apps, no flashing needed or download mode fiddling.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )
Just go to the KingoApp website, pick our phone model under Samsung N9006, download the app on your windows native machine ( I used Windows 8.1), run the app as "admin" and follow its instructions, that's all, really super awesomely simple I got my friend loving his Note3 rooted and laughing at my old method
I'm not promoting KingoApp, but I double checked on his phone after rooting with it. There was no strange Apps running on the background.
Earlier reports had pointed out some strange apps running on the background and rooting error messages pertaining to access permissions after installing KingoApp. But it looks like KingoApp has been updated because my friend's phone is clean. Zero permission errors and no strange background apps running.
Knox is 0x0, warranty is safe so that's good, he has not frozen or messed with any system apps yet (at least I didn't advise him to until a solid rom comes out).
My friend is Chinese of course, so if you don't mind all the warnings I'd like to say that you can use KingoApp but......like all things, at your own risk.:laugh:
Click to expand...
Click to collapse
Thanks for the detailed instructions.
But I am having some problems.
CWM installed successfully. In recovery mode I go successfully.
But when installing Avto-Root takes what the error is related to verification and the device reboots.
Prompt if you had a similar problem? How do you cope with it?
Thanks in advance for your reply.
michael1982t said:
I have rooted on: SM-N9006 / N9006ZCUBMJ3 and it looks like something is different with some firmware versions of N9006 as others have reported issues with getting to "download mode".
I have not tried rooting on other firmware variants of N9006.
I mentioned:
WARNING
++++++++++
- This guide assumes that you have the following phone model for the Note 3, and only this one.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )
Click to expand...
Click to collapse
[/QUOTE]
Hi,
My name is Daniel and I am from Malaysia.
Just 2 days ago i bought a Samsung Note 3 clone from a night market costing RM600 (US186.7).
Everything works fine, except there are some options not available from the settings, like the power saver option. And it can't add Google Account for my contacts synchronization. Does rooting solve this problems?
And i have read through the whole thread but cant find any rooting file on my phone specification. I attached herewith 'About My Device" information for your information.
Thank you.
Daniel
Its not a note 3, its a cheap china copy...no firmware for note 3 will work on it...
Teleported from my SM-N9005 from the Enterprise
Hello dude, can you provide a flashable version of your rom SM-N9006 N9006ZCUBMJ3? can you do this for us? i think it's about 10 minuts

[SOLVED] How to backup data from Recovery Is Not Seandroid enforcing GS6

Hello!
Some of my pictures were deleted so I tried to root and get them back. Now I face this huge problem and I am amateur so I need help. I tried to root my GS6 (SM-G920F) and now my phone is stuck on "Recovery Is Not Seandroid Enforcing". I used CF auto root and Odin.
I would like to know how to backup data? The pictures and videos are more worth than this phone.. I would like to know how to backup my pictures and videos and restore this to factory settings.
Thanks in advance!
Matias
dsimpe said:
Hello!
Some of my pictures were deleted so I tried to root and get them back. Now I face this huge problem and I am amateur so I need help. I tried to root my GS6 (SM-G920F) and now my phone is stuck on "Recovery Is Not Seandroid Enforcing". I used CF auto root and Odin.
I would like to know how to backup data? The pictures and videos are more worth than this phone.. I would like to know how to backup my pictures and videos and restore this to factory settings.
Thanks in advance!
Matias
Click to expand...
Click to collapse
Anyone? I would be even willing to pay to get make photos saved and my s6 back to factory settings. Please help!
Greetings,
Matias
Just flash ANY original rom for your modem with Odin
Sent From My Galaxy S6 Duos
criszz said:
Just flash ANY original rom for your modem with Odin
Sent From My Galaxy S6 Duos
Click to expand...
Click to collapse
Hello! Thank for your answer. I flashed twrp with Odin and get in recovery. I got photos and videos pulled with adb. Now I would like to flash stock firmware.
Phone model is SM-G920F and I bought it from Finland. I have android 5.1.1.
Can't find stock firmware with those infos. There is no finland version for 5.1.1. Can I use for example UK version and just change keyboard and language to Finnish?
Greetings,
Matias
Yes you can. But is there a posibility to not find finnish language
Sent From My Galaxy S6 Duos
It worked and I also found Finnish language.
Summary:
Problem:
I tried to root my GS6 (G920F) with CF Auto-Root. It went to mode where I was only able to go Download mode or phone tried to boot but it stuck on the samsung logo and on right upper corner was text "Recovery Is Not Seandroid Enforcing". I could right flash a stock firmware but I was fearful that my pictures and videos will be deleted.
How did I fix it?
1. Connect your GS6 to computer with USB cable and download Samsung USB Drivers.
2. Make sure you have enabled USB debugging.
3. Download Odin and TWRP (First I tried many versions of Odin and TWRP but none of them worked. I finally found versions which worked ((found on highonandroid article: how to root galaxy s6 with twrp recovery) also pm me if you need it).
4. Put your GS6 on download mode.
5. Flash TWRP.
6. Download Android SDK Tools.
7. Open Windows Command Prompt.
8. Go to adb folder with "cd" command. For example mine was "cd C:/adb".
9. Type "adb devices". Then "adb pull storage (and folder where you want your pictures and videos)". For example mine was "adb pull storage C:/backup".
10. Now your pictures and videos are safe (should be found from folder you pulled/DCIM). For example mine was C:/backup/DCIM.
11. Download a stock firmware.
12. Flash it with Odin and you're done.
I am new to this but if you have any kind of problems with this, pm me! I'll try to help you!

[Completed] Samsung Galaxy Core 2 (SM-G355H)- Cannot Flash Stock

Hi, I have a problem with my Samsung Galaxy Core 2 (SM-G355H). I tried to install the official firmware for this model that I get from SamMobile by using Odin, and everything went good, no "failed" and it was showed PASS as it should. But then when I tried to reboot it, it just didnt reboot. Now I can enter to download mode, but not into recovery mode or just start it normally. Are there any possible solutions? I would really appreciate any help.
stock recovery not working tried twice
cwm not working it just shows open android chest sign but no options in recovery menu.
odin passed stock recovery
but phone turns on till EULA and all process failed eg. googlemaps failed, systemprocess.com failed, android process failed everything just fails.
need help
Hi,
You are taking the right steps. I would create a thread here and ask for help from the experts who own your device, http://forum.xda-developers.com/t/galaxy-core-2
Good luck!

[Completed] Galaxy GT-S7262 reboots every time

Hello,
I am using samsung galaxy y duos GT-S7262, my phome was rooted and i have used and changed custom roms also
i was using CWM 6.0.3 touch for installing custom rom
but today i have tried to install a new custom rom of miui which belongs to i9300
it got installed but got stucked in boot screen of MIUI(miui.com)
i have done full wipe of cache,data and system.....but no use
so next i installed my old rom miui-v0.3.2
after that i got stuck in SAMSUNG screen With red( ! ) symbol and it does not up again always in same screen
so next i have installed cwm v6.0.3.7 it got installed and now i can enter into CW Mode
and from this i have installed rom once again even though same issue
i have wiped factory,cache and devlink in advance for many number of times
but no change same issue.....i have tryied many other things using Y-videos but no use
I also tried flashing new firmware using odni..but it also stucks i have waited for 2 hours but even though i progress bar i cant see even a slight line of green colour coming forward
So please help me to solve my problem
Note:- I think nothing is present in my phone memory and problem started after doing full wipe of CACHE,DATA and SYSTEM
Now i can only enter in Download mode and CMW 6.0.3.7 thats it.
when i select REBOOT into BOOTLOADER option in cwm 6.0.3.7
it again stucks in samsung screen with ! on left corner.
Hello,
Welcome to XDA.
I'm not saying that this is your issue but it sounds like you messed up the device partition table by flashing a ROM from a different model.
You may be able to flash your stock firmware with the addition of using a PIT file for your specific device model number/firmware By using Hiemdall in Linux/Ubuntu.
To assist you with finding what you need, try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.

Categories

Resources