Related
I have xperia Z3 dual D6633 with build number 23.0.F.1.82 and rooted it with giefroot_v3 then installed Z3-lockeddualrecovery2.8.2 without unlock bootloader my bootloader still locked.
I want to update the system via ota update center to version 23.0.1.F.0.96 after finish download it give me this message (could not verify). I tried a lot of times and tried factory rest same problem (could not verify) why??
I want update system without loosing root and recovery and without flash it via flashtool I want just update it via Ota to the newer system 23.0.1.F.0.96 with size(134.7 MB only)..... :crying:
thank you for all...
Google PRFCreator and create your own prerooted flashable zip for the latest firmware.
It will contain recovery as well.
gregbradley said:
Google PRFCreator and create your own prerooted flashable zip for the latest firmware.
It will contain recovery as well.
Click to expand...
Click to collapse
this means I can not update it via wifi only flash zip with the latest my own prerooted frimware?
borhan0089 said:
this means I can not update it via wifi only flash zip with the latest my own prerooted frimware?
Click to expand...
Click to collapse
Well if you definitely want to keep root I suggest doing it that way. It takes about 7 minutes to create the flashable zip (All automated, it is very easy) and about 30 seconds to flash it....
gregbradley said:
Well if you definitely want to keep root I suggest doing it that way. It takes about 7 minutes to create the flashable zip (All automated, it is very easy) and about 30 seconds to flash it....
Click to expand...
Click to collapse
I will try thank you friend..
Hey Guys,
Im thinking about buying the Z3 for my girlfriend, but wanted to know something...
Do you guys have stock based ROMS for Z3? Or the Ui is fluid enough that is not needed? (Don't wanna loose camera quality by going AOSP)
Thanks!
Hgneto said:
Hey Guys,
Im thinking about buying the Z3 for my girlfriend, but wanted to know something...
Do you guys have stock based ROMS for Z3? Or the Ui is fluid enough that is not needed? (Don't wanna loose camera quality by going AOSP)
Thanks!
Click to expand...
Click to collapse
The stock is so good, that we don' t need stock based or custom ROM' s.
Ok, I will check and if needed will install one of those.
Btw is it easy to root international version of Z3?
Thanks!
Hgneto said:
Ok, I will check and if needed will install one of those.
Btw is it easy to root international version of Z3?
Thanks!
Click to expand...
Click to collapse
Yes. There are instructions here.
Hgneto said:
Ok, I will check and if needed will install one of those.
Btw is it easy to root international version of Z3?
Thanks!
Click to expand...
Click to collapse
Be aware that directly rootable (by running exploit) are just certain KitKat ROM version, Lollipop is not directly rootable. Unless somebody provides already pre-rooted Stock ROM that you can flash using Flashtool, you would need to have rooted KitKat with recovery installed in order to flash pre-rooted Lollipop. The clean way on D6603 (similarly on other Z3`s too) is:
1. Backup whatever data you need
2. Download and flash version x.x.x.x.93 firmware (KitKat) with full wipe from Flashtool (Androxyde)
3. Boot, enable USB debug/mock locations/unknown sources
4. Run giefroot exploit
5. Install XZDualRecovery (installer) for locked bootloaders
6. Download PRFCreator
7. Download Lollipop stock ROM using XperiFirm (or other resource), SuperSU flashable and XZDualRecovery flashable
8. Create FTF from StockROM files
9. Create pre-rooted firmware using PRFC (include just system, nothing else), SuperSU and XZDualRecovery
10. Boot into recovery, wipe everything
11. Flash flashable created with PRFC
12. POWER OFF - do not reboot, disconnect phone from PC if connected
13. Start Flashtool, select Flash - Flashmode, select FTF you created, EXCLUDE system and tick NO FINAL VERIFICATION
14. Hit OK and when requested, hold VOLUME DOWN button while inserting USB
15. Reboot and enjoy
ondrejvaroscak said:
Be aware that directly rootable (by running exploit) are just certain KitKat ROM version, Lollipop is not directly rootable. Unless somebody provides already pre-rooted Stock ROM that you can flash using Flashtool, you would need to have rooted KitKat with recovery installed in order to flash pre-rooted Lollipop. The clean way on D6603 (similarly on other Z3`s too) is:
1. Backup whatever data you need
2. Download and flash version x.x.x.x.93 firmware (KitKat) with full wipe from Flashtool (Androxyde)
3. Boot, enable USB debug/mock locations/unknown sources
4. Run giefroot exploit
5. Install XZDualRecovery (installer) for locked bootloaders
6. Download PRFCreator
7. Download Lollipop stock ROM using XperiFirm (or other resource), SuperSU flashable and XZDualRecovery flashable
8. Create FTF from StockROM files
9. Create pre-rooted firmware using PRFC (include just system, nothing else), SuperSU and XZDualRecovery
10. Boot into recovery, wipe everything
11. Flash flashable created with PRFC
12. POWER OFF - do not reboot, disconnect phone from PC if connected
13. Start Flashtool, select Flash - Flashmode, select FTF you created, EXCLUDE system and tick NO FINAL VERIFICATION
14. Hit OK and when requested, hold VOLUME DOWN button while inserting USB
15. Reboot and enjoy
Click to expand...
Click to collapse
Hey again men!
So, my girlfriend just got her Z3 and I'm trying to root her phone, using this tutorial, but after I installed the Flashtool and run it (both the normal and the Flashtool64), it says:
"Please move C:\Flashtool\firmware content to C:\Users\ana\.flashTool\firmwares
I already done it, but there are 3 folders in the place they are asking me to move under firmwares: 1) Downloads 2) prepared 3) sinExtracted...
Where should I put it, or more exactly, what I must do to make the Flashtool work?
Couldn't find the solution anywhere..
Thanks in advance! :good:
delete the c:\flashtool\firmwares folder
Hgneto said:
Hey again men!
So, my girlfriend just got her Z3 and I'm trying to root her phone, using this tutorial, but after I installed the Flashtool and run it (both the normal and the Flashtool64), it says:
"Please move C:\Flashtool\firmware content to C:\Users\ana\.flashTool\firmwares
I already done it, but there are 3 folders in the place they are asking me to move under firmwares: 1) Downloads 2) prepared 3) sinExtracted...
Where should I put it, or more exactly, what I must do to make the Flashtool work?
Couldn't find the solution anywhere..
Thanks in advance! :good:
Click to expand...
Click to collapse
Directly in firmwares and not in subfolder
Sent from my D6603 using XDA Free mobile app
ondrejvaroscak said:
Be aware that directly rootable (by running exploit) are just certain KitKat ROM version, Lollipop is not directly rootable. Unless somebody provides already pre-rooted Stock ROM that you can flash using Flashtool, you would need to have rooted KitKat with recovery installed in order to flash pre-rooted Lollipop. The clean way on D6603 (similarly on other Z3`s too) is:
1. Backup whatever data you need
2. Download and flash version x.x.x.x.93 firmware (KitKat) with full wipe from Flashtool (Androxyde)
3. Boot, enable USB debug/mock locations/unknown sources
4. Run giefroot exploit
5. Install XZDualRecovery (installer) for locked bootloaders
6. Download PRFCreator
7. Download Lollipop stock ROM using XperiFirm (or other resource), SuperSU flashable and XZDualRecovery flashable
8. Create FTF from StockROM files
9. Create pre-rooted firmware using PRFC (include just system, nothing else), SuperSU and XZDualRecovery
10. Boot into recovery, wipe everything
11. Flash flashable created with PRFC
12. POWER OFF - do not reboot, disconnect phone from PC if connected
13. Start Flashtool, select Flash - Flashmode, select FTF you created, EXCLUDE system and tick NO FINAL VERIFICATION
14. Hit OK and when requested, hold VOLUME DOWN button while inserting USB
15. Reboot and enjoy[/QUOTE
So just to be clear for this beginner - will the above steps work for rooted z3 with locked bootloader running kitkat 4.4.4? Will I end up with rooted lollipop? And since I am already rooted and have dual recovery installed can I start at step 6? Or even at step 8? Thanks...
Click to expand...
Click to collapse
What's going on with kingroot for Xperia z3 lolipop 5.1.1? There is a date for available kingroot for this version?
No there isn't. Kingroot only supports 5.0 not 5.1 You could always flash 5.0.2, root with kingroot then flash a pre-rooted 5.1.1
heywheelie said:
No there isn't. Kingroot only supports 5.0 not 5.1 You could always flash 5.0.2, root with kingroot then flash a pre-rooted 5.1.1
Click to expand...
Click to collapse
I did it but when I updated to 5.1.1 the Root was deleted
DANIELTZ19 said:
What's going on with kingroot for Xperia z3 lolipop 5.1.1? There is a date for available kingroot for this version?
Click to expand...
Click to collapse
No date available...
I'm waiting for it too :crying:
DANIELTZ19 said:
I did it but when I updated to 5.1.1 the Root was deleted
Click to expand...
Click to collapse
Did you flash a stock 5.0.2, then root with kingroot, install the latest dual recovery from PC, boot to recovery, do a complete wipe then flash a pre-rooted 5.1.1 from recovery. It should work. I tried it here, worked perfectly.
BTW make sure you put the pre-rooted 5.1.1 on your sdcard before you start so once you go into recovery to do a full wipe you don't reboot until you flash the pre-rooted 5.1..1
heywheelie said:
Did you flash a stock 5.0.2, then root with kingroot, install the latest dual recovery from PC, boot to recovery, do a complete wipe then flash a pre-rooted 5.1.1 from recovery. It should work. I tried it here, worked perfectly.
BTW make sure you put the pre-rooted 5.1.1 on your sdcard before you start so once you go into recovery to do a full wipe you don't reboot until you flash the pre-rooted 5.1..1
Click to expand...
Click to collapse
I don't install pre-rooted 5.1.1 because it needs to Recovery .. and I don't want to do a recovery in my device .... i just Burning a normal version of 5.1.1
DANIELTZ19 said:
I don't install pre-rooted 5.1.1 because it needs to Recovery .. and I don't want to do a recovery in my device .... i just Burning a normal version of 5.1.1
Click to expand...
Click to collapse
Then just delete the recovery after you have flashed the pre rooted 5.1.1. The ramdisks are in the system partition.
gregbradley said:
Then just delete the recovery after you have flashed the pre rooted 5.1.1. The ramdisks are in the system partition.
Click to expand...
Click to collapse
If I do now Recovery then it deletes all my stuff in the cell phone .. other than that it will lose my warranty and it might make my cell phone issues
DANIELTZ19 said:
If I do now Recovery then it deletes all my stuff in the cell phone
Click to expand...
Click to collapse
It should not do that if you do it properly. You only lose stuff in your phone if you unlock the bootloader and you do not need to do that. Also, making a backup of things you want to keep is always a good idea.
DANIELTZ19 said:
.. other than that it will lose my warranty and it might make my cell phone issues
Click to expand...
Click to collapse
No you will not lose warranty if you follow the locked bootloader tutorial. You do not need to unlock the bootloader to install recovery and flash a pre-rooted 5.1.1
Please take a moment to look through any of the multiple guides in the general section to see how to do this
gregbradley said:
It should not do that if you do it properly. You only lose stuff in your phone if you unlock the bootloader and you do not need to do that. Also, making a backup of things you want to keep is always a good idea.
No you will not lose warranty if you follow the locked bootloader tutorial. You do not need to unlock the bootloader to install recovery and flash a pre-rooted 5.1.1
Please take a moment to look through any of the multiple guides in the general section to see how to do this
Click to expand...
Click to collapse
Okay, thank you very much, but there will be no hacking with "Kingroot"? This is the most easy and simple ..
DANIELTZ19 said:
Okay, thank you very much, but there will be no hacking with "Kingroot"? This is the most easy and simple ..
Click to expand...
Click to collapse
Kingroot will send your IMEI to an IP address in china, I do not recommend it. Downgrade and use giefroot, install dual recovery, flash a pre rooted 5.1.1, then delete the recovery if you want, but I do not see why you would do this.
gregbradley said:
Kingroot will send your IMEI to an IP address in china, I do not recommend it. Downgrade and use giefroot, install dual recovery, flash a pre rooted 5.1.1, then delete the recovery if you want, but I do not see why you would do this.
Click to expand...
Click to collapse
Because that everyone I know who did Recovery then it's destroyed a lot of things on the device ..
DANIELTZ19 said:
Because that everyone I know who did Recovery then it's destroyed a lot of things on the device ..
Click to expand...
Click to collapse
You are confusing recovery with losing drm keys when unlocking the bootloader.
I have never come across anyone who has recovery installed correctly and used correctly who has had problems like that
@DANIELTZ19
If you're worried and want another opinion then my advice is that everything GregBradley has stated is correct. His method is also the safest and reliable with an excellent tutorial in the General forum. Read it http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
cheers
Hello there,
have been trying to root my new xperia z3 for 3 weekends now with no luck.
My bootloader has been unlocked through sony website, then relocked and unlocked many times using flashtool.
Looks like all the recoveries (doomlord, twrp) I could find work only on 4.4.4. Then I use flashtool to flash lollipop 5.1.1 23.4.A.1.200 and either wipe and loose the root or don't wipe all and enter a bootloop.
Flashing those recovery kernels straight on lollipop make the phone enter bootloop.
Are you guys able to root those Z3 under 5.1.1 ?
thank you
Sure shot easy way is flash kitkat firmware and use giefroot or flash 5.0 firmware and use kingroot.
Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.
Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?
Thanks a lot for your answer guys.
Am unusually struggling with this device.
lol1rfs said:
Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.
Click to expand...
Click to collapse
Have already downgraded to kitkat, installed custom recovery and rooted. But the 5.1.1 stock flash indeed wipe everything.
Haven't found yet a custom recovery for 5.1.1 that doesn't make the phone enter a bootloop. Would you happen to have a link ?
I'll give a look to that PRFcreator, didn't know about it.
Jkay7 said:
Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?
Click to expand...
Click to collapse
This is what I read about kingroot and haven't found any other way to root a 5.1.1 stock.
Where could I find a pre-rooter ROM then ? My wish was to be stock and rooted to be able to use apps like titanium backup and adblockers. Used to try custom roms every other day on my old SGS but today I'd be happy with something that just works.
Did not make any backup before unlocking but looked like flashtool was able to relock the device. Am I right guessing I didn't loose my DRM keys then ?
Thanks again for your answers.
Edit: looks like am missing sthg, what's the point in rooting a kitkat to upgrade with a pre-rooted lollipop right after ?
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
I hope you made a TA backup before unlocking your bootloader, otherwise you have lost your DRM keys forever.
Anyway, if your bootloader is now locked, follow the guide that Licaon_Kter linked in the above post.
The exploit that lets us root our Z3 only works on Kitkat, so downgrade first, run the exploit to obtain root, and install recovery.
You will then have stock, rooted, KitKat.
To get to 5.1.1, you will then need to either create your own pre rooted firmware, or download one that someone has kindly posted on here.
If you want to learn how to do it, read this --> Create your own pre rooted firmware with PRF Creator
PRF Creator will create a zip file that can be flashed from recovery, so once you have recovery installed, it's dead easy.
That will get you where you want to be.
However . . . and there's always a however lol . . .
. . . if you still have an unlocked bootloader, it is much simpler from wherever you are.
Find any custom rom that has recovery built in, and almost all do, then fastboot the kernel only, the boot.img.
Reboot your device and enter recovery.
Install your pre rooted firmware that you have either created with PRF Creator, or downloaded from here.
Job done.
My personal advice is read, read, and then read some more.
It can be very complicated, but you'll get the hang of it.
Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I still have an unlocked bootloader since flashtool can lock and unlock it in a matter of a second.
Went back again in KK rooted with twrp recovery.
Wiped data, cache, dalvik.
Flashed D6603_23.4.A.1.232_Customized_US_SuperSU_XZDR2.8.2 1 from the link above and ... CWM recovery report install from sdcard completed after 1s and nothing more. Am still booting in KK after that.
This didn't work for me. Am losing it now with this phone.
Am I missing sthg ? Any advice ?
Can't use PRFCreator, am under mac os...
Thanks to all for your help
Try with TWRP too
Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
Licaon_Kter said:
Try with TWRP too
Click to expand...
Click to collapse
tried twrp found there http://forum.xda-developers.com/z3/development/recovery-z3-twrp-2-8-4-0-t3028846
phone is not booting anymore.
twrp post says it doesn't work on stock room.
---------- Post added at 02:16 PM ---------- Previous post was at 02:05 PM ----------
Is there really anyone out there with a rooted stock lollipop ?
or you are all using customs ?
am seriously questionning the thing now
Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Licaon_Kter said:
Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I just can't, I don't have access to a window machine
Both giefroot and FlashTool are for Win/Mac/Linux.
Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
I appreciate your still trying to help me.
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
I have read thoroughly and downloaded pre-rooted lollipop stock roms from the link you provided.
Once under KK, rooted, with all settings set properly (debug, security, etc...), and all caches/dalvik/data wiped, the CMW recovery just don't flash those lollipop roms. After just one sec, it says install completed but then the device still boot under KK.
TWRP doesn't even intall, so am wondering if this is even possible to get a TWRP on stock rom.
Have tried all of those with bootloader unlocked and locked, or a mix like unlocked first to be able to root a KK, then relock to flash a stock prerooted 5.1.1 (as stated in the post) but then I get a device that doesn't even boot.
Tried dualrecovery too, flash the zip, and nothing.
I suspect all of you guys have used some sort of .bat windows utility to get through this.
Once again, thanks for your help and patience.
ikho said:
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
Click to expand...
Click to collapse
The point is to go from the BEGINing _again_: Flash stock KK, giefroot, XZ, pre-rooted LP
I have done it in Linux w/ locked bootloader and stock ROM, hence my pointers.
XZDualrecovery has TWRP 2.8.7.0. But, do take note that you use Volume Down to enter PhilzTouch Recovery and Volume Up to enter TWRP.
Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
am sorry, can't find how to use giefroot on a mac.
read quite a few post of people saying that was not working for them.
Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )
Licaon_Kter said:
Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )
Click to expand...
Click to collapse
yaaay, houray it finally worked
big thanks man, you saved me $500 on that one !
This post is successor to
https://forum.xda-developers.com/z5...ting-xperia-z5-z5p-variants-drm-keys-t3437902
SONY has pushed update 32.4.A.0.160 for XPERIA Z5 E6833 / E6853 and E6883 which is on Android 7.1.1 (unexpectedly)
THOSE WHO NEVER ROOTED THEIR Z5 / Z5P AND POSSIBLY HAVE LOCKED BOOT LOADER MUST READ THIS
https://forum.xda-developers.com/z5...ting-xperia-z5-z5p-variants-drm-keys-t3437902
THOSE WHO ALREADY HAVE ROOTED Z5P CAN PROCEED because you are already aware of
- method of extracting TA.img either via DIRTYCOW SCRIPT (android6) and ivoryroot (android 5x)
- flashing Nougat by latest flashtool v0.9.23.2 (also knows replacing xjar files to make flashtool uptodate )
- ALL mother board and related drivers are installed
- you already have downloaded FTF 32.4.A.0.160 of your VARIANT/region and
- ftf downloaded by XPERIFIRM tool (recommended)
the twrp installed stock modified kernel of 32.4.A.0.160 can be found at
https://mega.nz/#F!uVBgFTwQ!xYufkAlsDsajEIEJ3BoDDg
thanks @ytheekshana / @fdson12 for providing sin files
Simply,
1. put superSU in sdcard
2. flash the firmware (if you havent already)
3. flash the kernel
4. boot in to recovery
5. flash the superSU
6 reboot
ORRR if you prefer superuser-r259 then
1. put superuser-r259.zip in sdcard
2. phh_SuperUser_v1.0.3.3.apk also in sdcard
3. flash the firmware (if you havent already)
4.reboot in to recovery
5. flash the superuser-r259.zip
6. Reboot
7. instal phh_SuperUser_v1.0.3.3.apk
8. reboot
9. check for rootaccess
MAKE SYSTEM WRITABLE !
https://forum.xda-developers.com/xperia-z5/general/z5-making-writable-32-3-0-372-root-t3551067
Screenshot, my device on kernel given above
Finally
ytheekshana said:
Finally
Click to expand...
Click to collapse
please send me your kernel.sin for 32.A.Z.0.160- E6853
thank you
YasuHamed said:
please send me your kernel.sin for 32.A.Z.0.160- E6853
thank you
Click to expand...
Click to collapse
sent it
ytheekshana said:
sent it
Click to expand...
Click to collapse
updated the link
please check
That's fast. Amazing!!
---------- Post added at 11:52 PM ---------- Previous post was at 11:48 PM ----------
It has drm fix and the other things?
Waiting for E6883..
Kernel.sin sent.....
fdson12 said:
Waiting for E6883..
Kernel.sin sent.....
Click to expand...
Click to collapse
Sir
I have updated E6883.... .img file at https://mega.nz/#F!uVBgFTwQ!xYufkAlsDsajEIEJ3BoDDg
after putting superSU in sd card , kindly flash it
just incase, if device goes in to bootloops or softbricks
holding power+volumup for 15 seconds will make the device vibrate THRICE , and on second vibration. releasing fingers IMMEDIATELY will switchoff the device for you to connect in flashmode/fastboot mode to flash the roms/kernels again
YasuHamed said:
Sir
I have updated E6883.... .img file at https://mega.nz/#F!uVBgFTwQ!xYufkAlsDsajEIEJ3BoDDg
after putting superSU in sd card , kindly flash it
just incase, if device goes in to bootloops or softbricks
holding power+volumup for 15 seconds will make the device vibrate THRICE , and on second vibration. releasing fingers IMMEDIATELY will switchoff the device for you to connect in flashmode/fastboot mode to flash the roms/kernels again
Click to expand...
Click to collapse
thanks for update friend e6883
It has DRM fix???
Shivam1754 said:
It has DRM fix???
Click to expand...
Click to collapse
yes it has
How do I restore my DRM keys if I have TA-xxxxxx.img from iovyroot?
Thank you!
YasuHamed said:
Screenshot, my device on kernel given above
Click to expand...
Click to collapse
can you add latest TWRP recovery or any upper version because in this TWRP recovery not showing Internal storage......
icaruswalks said:
How do I restore my DRM keys if I have TA-xxxxxx.img from iovyroot?
Thank you!
Click to expand...
Click to collapse
please see this
its for XZ but it applies to X also
https://forum.xda-developers.com/xperia-xz/how-to/how-to-unlock-bl-kernel-twrp-root-t3541648
@YasuHamed couldnt get my phone to boot, when trying to install phh supersu, i wouldnt install from twrp e6853 NOBA rom from flashtool download
claesr said:
@YasuHamed couldnt get my phone to boot, when trying to install phh supersu, i wouldnt install from twrp e6853 NOBA rom from flashtool download
Click to expand...
Click to collapse
if you are installing phh superuser then
1. flash superuser-r259.zip from twrp
2. boot and install phh_superuser...apk
then reboot.
however i am personally using superSU. since on phh_superuser i was unable to give /system RW access
Just unable to boot into TWRP recovery.It stuck on splash screen and the LED is yellow.I tried the rootkernel in this thread too:https://forum.xda-developers.com/z5-premium/general/firmware-32-3-0-372-certified-android-7-t3537948
and got same problem.My device is z5p dual,E6883,I have already install the 32.4.A.0.160 firmare downloaded from xperifirm.Root access and DRM fix works perfectly,the only problem is that I cannot boot into TWRP.I dont know what's wrong.Any advice please?
do this kernel support SafetyNet and magisk?
Hi!
I don't understand this, if the kernel has the drm fix, is necessary downgrade the phone and backup the original drm? Or can I install this kernel, twrp and root directly the stock 7.1.1 version?