So I rooted my tablet and I tried to install a custom recovery (TWRP 2.6.3.0 Wingray) and after installing I rebooted my tablet to check if it works, after that I am stuck on RDS mode 0 with a red text saying: Failed image SOS 0x0002 I can hear if it's connected working to my PC and I can see it's name and type but not access it's files I tried looking at: Failed Image SOS 0x0002 on Motorla xoom forums and following the links and all that was but I couldn't access the tablet, after every command it said:"Wating for device".
What do I do?
Related
Hey All,
My Dad's Xoom died over the weekend - 13months after purchase so is not covered by the warranty. He was browsing a site, it came up with a "Internet is not responding - do you want to continue to wait" message and he clicked Wait - after a second the tablet knocked off. It will not come on by pressing Power and only turns on by pressing Power and Vol +
It gets past the Motorolo logo screen and the device starts the boot animation, about 20 seconds into this it freezes and reboots - this continues in a loop. It's been GEDified and was running the last OTA update 4.1.2 - no root etc.
I can get into the stock recovery and performed a factory reset - but the same thing happens. I've also tried Update From USB with an OTG cable but the screen just shows Choose a package to install and under it has /sdcard but nothing else. I have a dummy zip on both the Flash disk and SD card so it's not reading either.
I've also tried to perform update via ADB - when I select it and connect to a PC (Win 7 32bit) it tries to install drivers but I see In Computer Management that it shows under Unknown. ADB Devices returns List of devices message but nothing under it.
I've also selected the fastboot command at boot, tried fastboot devices and the command does see the Xoom.
So my questions
1) Anyone seen anything like this issue before and know how to fix it?
2) Is it best to try to reinstall the ROM? If so, how do you suggest I can see it with ADB?
3) As I have Fastboot command, could I try to install CWM and see if that sees a ZIP on the sdcard - so I can install a new ROM.
Any help much appreciated :good:
so...I've just done a fastboot oem unlock
and then tried to flash the CWM recovery using the fastboot commands - no errors, press reboot and go into Recovery but still getting Android system recovery 3e :crying:
claned said:
so...I've just done a fastboot oem unlock
and then tried to flash the CWM recovery using the fastboot commands - no errors, press reboot and go into Recovery but still getting Android system recovery 3e :crying:
Click to expand...
Click to collapse
So just to add to this, I found the stock recovery.img, boot.img, userdata.img and system.img and used the fastboot commands to send all to the motorola - all succeeded without error....still the same problem though.
I installed RSD lite and tried a few SBF files but I'm getting an INI error - off to google possible solutions to that now
I have a motorola Xoom wifi and it wont boot past boot screen saying "Failed image LNX 0x0002 Starting RSD mode 0"
I have searched the forum but it seems to be little different.
Thanks in advance
Update!!
Ok so it no longer says the error message and i can now get into the recovery modes.
When it boots it just hangs on the logo and wont boot further.
Any ideas?
Thanks
Hello everyone!!
After doing a lot of extensive research I finally decided to flash Cyanogenmod 11 on my device (btw it's Moto G XT1033). I followed all the instructions of an xda member. Unfortunately my phone fails after flashing the recovery image. It shows on the cmd prompt that the flashing was successful but everytime I go to recovery mode I am no longer able to access the recovery.img
All I get is a blank screen with occasional blanks, freezes and various types of patterns on the screen. I followed each and every instruction to the letter still I do not know why this is happening. cannot even access the default bootloader now!
Here are the steps I used:
1. Unlock the bootloader
2. Installed adb and fastboot and copied the img file to the adb directory
3. Restarted my phone to the boot menu
4. used the command "fastboot flash recovery recovery.img"
5. got a message that the operation was successful.
However after these steps, I am unable to access the cwm bootmenu. Even the default one is no longer accessible.
Please help!!!:crying::crying:
After flashing recovery, do not reboot the phone. Use the phone's volume buttons to enter fastboot from the phone's fastboot menu.
I would install trwp instead.
I agree on Kannz2's suggestion for TWRP.
AFAIK, the recovery you're trying to flash is closed sourced and is no longer being updated.
Here's a link to TWRP:
http://techerrata.com/browse/twrp2/xt1032
Link to ADB and Fastboot that I use:
http://forum.xda-developers.com/showthread.php?t=2588979
So i was changing roms, and when i did this i accidently flashed the wrong boot image. After that i boot into a green screen with a red and blue squares then a message following it "boot image verify fail, please update to the authorized images. I can boot into fastboot recovery but i have no access through adb, i can preform a few adb amd fastboot commands but cannot flash or access my phone. It also boots into Huawei eRecovery and will let me try to download the latest recovery but fails each time, no matter if its highspeed internet or hotspot i always get a download failed message, can anyone help me out? I miss my x5 already and have tried almost everything i can and have done research on.
So, with CWM I flashed 7.1.1 taoshan to my Xperia L. The OS works, but when I tried to re-enter recovery mode to install gapps, CWM got replaced with Android stock Recovery. See Image: imgur. com/a/qOSJL
(I cant post links, put the imgur. and the com together)
When I try to Apply update from SD card, I get:
-- Couldn't mount /sdcard
Installation aborted.
E: failed to find /misc partition
I tried to Apply update from ADB, but I just get these errors after opening package:
e: footer is wrong
e: signature verification failed
Installation aborted.
I also tried fastboot, but whenever I enter the bootloader my PC doesn't recognize the phone with fastboot devices , and is stuck on waiting for any device (If it is not in the bootloader adb devices works)
While it is in the bootloader the screen is just black and the LED is blue.
I also tried CWMs and TWRPs app, but neither of them worked.
Can you please help me replace the stock recovery or install gapps without flashing it? Thanks.
You can download the latest TWRP for the official site and flash it with command line in your windows pc
. This is the command for the fast boot if you don't know ( fastboot flash boot ......File name.img ) you can also flash it with flash tool
And if your computer can't find your phone then reinstall the Xperia L drivers