Failed image LNX 0x0002 Starting RSD mode 0 (Help) - Xoom Q&A, Help & Troubleshooting

I have a motorola Xoom wifi and it wont boot past boot screen saying "Failed image LNX 0x0002 Starting RSD mode 0"
I have searched the forum but it seems to be little different.
Thanks in advance
Update!!
Ok so it no longer says the error message and i can now get into the recovery modes.
When it boots it just hangs on the logo and wont boot further.
Any ideas?
Thanks

Related

[Q] MZ60 Error: Failed Image LNX 0x0002

Dear All,
Please, I need any help I can get. I was trying to restore my MZ601 to Stock ROM and after all the installation, it booted with the Motorola Logo and with this message:
Failed Image LNX 0x0002
Starting Fastboot Protocol Support.
The computer reported that no device detected. I have tried many cables, uninstall the Motorola Driver software more than ten times, yet the same problem. Have I bricked the gadget? If so, how can I get it working again? If not bricked, what is the way out?
OBA

[Q]Fastboot mode works-> many comands get FAILED-> recovery not working-battery down?

[Q]Fastboot mode works-> many comands get FAILED-> recovery not working-battery down?
hi,
the thing is i can boot my honor only into fastboot mode and i'm able to flash files. but on many cmds/options like erase, format,getvar,-w... i get the error message "FAILED (remote: command not allowed)" -the phone is unlocked, do i get the error because maybe usb debugging is disabled?
the other thing is when flash recovery and reboot the screen turns black and than white and nothing happens. not booting into recovery or system. could this be because battery is empty/not loading anymore? (tried fastboot loading script but getvar cmd gets FAILED error, so i can't view my battery charge)
if you have any idea, just feel free to tell
Hi, I have the same problem.
After y try to update 5.1.1 beta, my phone is dead...
Please can anybody help us?

MZ601 stuck on Fastboot after trying to install a custom recovery

So I rooted my tablet and I tried to install a custom recovery (TWRP 2.6.3.0 Wingray) and after installing I rebooted my tablet to check if it works, after that I am stuck on RDS mode 0 with a red text saying: Failed image SOS 0x0002 I can hear if it's connected working to my PC and I can see it's name and type but not access it's files I tried looking at: Failed Image SOS 0x0002 on Motorla xoom forums and following the links and all that was but I couldn't access the tablet, after every command it said:"Wating for device".
What do I do?

Unbrick MeMO Pad FHD 10 (ME302KL)

Hi,
I tried flashing a friend's MeMO Pad FHD 10 (ME302KL) with this custom Rom:
https://forum.xda-developers.com/android/general/rom-unofficial-cm-13-0-memopad-10-fhd-t3442428
Apparently something went wrong.
Booting into Recovery mode gives me:
"Can not load invalid recovery image" and then goes into fastboot mode, saying:
"Invalid boot image ! ! !" and "Secure boot - enabled"
I can reflash boot.img from http://dlcdnet.asus.com/pub/ASUS/EeePAD/ME302KL/WW_epaduse_10_10_3_39_UpdateLauncher.zip
via fastboot, but it doesn't change the situation.
I don't know how to unbrick it, anything different I try to flash via fastboot results in
"FAILED (remote: Invalid input Image. Cannot flash before unlock)"
Now what? anybody able to help me?
I would try flashing original recovery.img, but I can't find it. I can't turn off secure boot either. I suppose I wasn't successful turning it off before flashing :/
Any help very appreciated!
best, basti

Bricked oneplus 7 pro, stuck in fastboot

I recently unlocked my bootloader on my sprint oneplus 7 pro 5g, but i screwed up afterwards and accidentally wiped the entire system, i've tried msm downloader and reflashing to no avail. sometimes when i reboot the boot loader it gives me the unlocked warning screen extremely briefly before entering the boot loader again. when i try to boot into twrp using fastboot it gives me a "remote: 'failed to load/authenticate boot image: load error" however occasionally the boot image will send but it wont actually boot it just gets stuck on the oneplus logo fastboot mode screen. When i try to use msmdownload tool it gives me a "device not match image" message. i've also attempted to reflash every partition individually by unpacking the oxygenOS zip and flashing each image one at a time. immediate assistance would be greatly appreciated.
aero_dreams said:
I recently unlocked my bootloader on my sprint oneplus 7 pro 5g, but i screwed up afterwards and accidentally wiped the entire system, i've tried msm downloader and reflashing to no avail. sometimes when i reboot the boot loader it gives me the unlocked warning screen extremely briefly before entering the boot loader again. when i try to boot into twrp using fastboot it gives me a "remote: 'failed to load/authenticate boot image: load error" however occasionally the boot image will send but it wont actually boot it just gets stuck on the oneplus logo fastboot mode screen. When i try to use msmdownload tool it gives me a "device not match image" message. i've also attempted to reflash every partition individually by unpacking the oxygenOS zip and flashing each image one at a time. immediate assistance would be greatly appreciated.
Click to expand...
Click to collapse
Have you checked out this and tried this?
https://forum.xda-developers.com/oneplus-7-pro/how-to/sprint-msmdownloadtool-unbrick-t3989841/amp/
Sent from my OnePlus 7 Pro using Tapatalk
aero_dreams said:
I recently unlocked my bootloader on my sprint oneplus 7 pro 5g, but i screwed up afterwards and accidentally wiped the entire system, i've tried msm downloader and reflashing to no avail. sometimes when i reboot the boot loader it gives me the unlocked warning screen extremely briefly before entering the boot loader again. when i try to boot into twrp using fastboot it gives me a "remote: 'failed to load/authenticate boot image: load error" however occasionally the boot image will send but it wont actually boot it just gets stuck on the oneplus logo fastboot mode screen. When i try to use msmdownload tool it gives me a "device not match image" message. i've also attempted to reflash every partition individually by unpacking the oxygenOS zip and flashing each image one at a time. immediate assistance would be greatly appreciated.
Click to expand...
Click to collapse
Gm1920 or gm1925? Pm sent.
hi....i'm having the same problem....everything was working until i flashed majick in twrp and then got stuck in fastboot......and nothing will work....thanks in advance.....i have an account but my google account was compromised and lost all credentials.......thanks again for finding a way to unlock the bootloader

Categories

Resources