Hi,
I tried flashing a friend's MeMO Pad FHD 10 (ME302KL) with this custom Rom:
https://forum.xda-developers.com/android/general/rom-unofficial-cm-13-0-memopad-10-fhd-t3442428
Apparently something went wrong.
Booting into Recovery mode gives me:
"Can not load invalid recovery image" and then goes into fastboot mode, saying:
"Invalid boot image ! ! !" and "Secure boot - enabled"
I can reflash boot.img from http://dlcdnet.asus.com/pub/ASUS/EeePAD/ME302KL/WW_epaduse_10_10_3_39_UpdateLauncher.zip
via fastboot, but it doesn't change the situation.
I don't know how to unbrick it, anything different I try to flash via fastboot results in
"FAILED (remote: Invalid input Image. Cannot flash before unlock)"
Now what? anybody able to help me?
I would try flashing original recovery.img, but I can't find it. I can't turn off secure boot either. I suppose I wasn't successful turning it off before flashing :/
Any help very appreciated!
best, basti
Related
Sorry for my bad English. I know is a post about this , but no solution founded! I wiped my cachel/dalvik/data and Now I'm stucked with TWRP 2.6.3.0 boot loop. My tablet doesn't mount! I can go in the fastboot with adb reboot-bootloader. Fastboot work but it stucks and sending or reboot(and if i force reboot my tablet goes in twrp boot loop).I flashed Nv but I couldn't extract that blob. The custom recovery for twrp says something about saving in the intenet server. Please help me out! Sorry for my mistakes..
TheKid1997x said:
Sorry for my bad English. I know is a post about this , but no solution founded! I wiped my cachel/dalvik/data and Now I'm stucked with TWRP 2.6.3.0 boot loop. My tablet doesn't mount! I can go in the fastboot with adb reboot-bootloader. Fastboot work but it stucks and sending or reboot(and if i force reboot my tablet goes in twrp boot loop).I flashed Nv but I couldn't extract that blob. The custom recovery for twrp says something about saving in the intenet server. Please help me out! Sorry for my mistakes..
Click to expand...
Click to collapse
That's not nearly clear enough for someone to come in and help. Why don't you recount exactly each step you did and what happened at each then. What is a TWRP boot loop? Does fastboot recognize your tablet (does it return a serial number when you inquire?)? When you tried to send, did it say ok? Or wait for device? NVFlash: Are you on CWM recovery now? NVFlash doesn't run on TWRP! Saying "twrp says something about saving in the intenet server..." confuses me.
graphdarnell said:
That's not nearly clear enough for someone to come in and help. Why don't you recount exactly each step you did and what happened at each then. What is a TWRP boot loop? Does fastboot recognize your tablet (does it return a serial number when you inquire?)? When you tried to send, did it say ok? Or wait for device? NVFlash: Are you on CWM recovery now? NVFlash doesn't run on TWRP! Saying "twrp says something about saving in the intenet server..." confuses me.
Click to expand...
Click to collapse
Let's recap: I'm running TWRP. TWRP boot loop means the tablet continous boot into recovery.The only way I can acces fastboot i by going in recovery and than using the adb reboot-bootloader command in my pc. When I type fastboot devices gives me a serial number. The flashing procces from fastboot is preatty annoying because sometimes says OK erase , sended , writed(sometimes the writing procces take 2-3 secconds)Sometimes gives me errors such as many links. When I flashed NVflash that Root recovery from NV says something like: The bloobs were uploaded to the server!
Thanks anyway! I managed to delete the bootloader and the bad recovery! After that I flashed 2.4.40 and after the 2.7.0.1 . Now I'm running CM! THANKS:laugh:
Hello Everyone,
My moto g phone suddenly started giving errors saying "unfortunately "xxxxx" not working. xxxx is like google play and many more system services. I cannot do anything as it gives the error continuously.
I was trying to factory reset the mobile and I got the error of "boot up failed". I searched for this and found out that I need to go for custom recovery(I'm new to this) to avoid this error and get my phone back to normal.
I found that I need to unlock boot loader to for custom recovery. After trying and searching a lot I managed to do that finally with the help of a thread in this forum.
From that time I tried with many img files like TWRP, CWM and philz. But, still I could not manage to get my phone back to work.
Last 3 days I was fully in to this searching and finding solution and finally thought to write here(I'm not feeling to give up on this). I can provide you with any information needed.
I read in some guidance of CWM recovery that I need to get CWM model to process further after the below command.
Code:
fastboot flash recovery recoveryimage.img
Instead my screen stays with the below content for whatever .img file I pass for the above command
"Android system recovery <3e>
LXB22. 46-28. 1"
Appreciate any help or support on this to get my phone back to work. Thanks in advance
Nazneen said:
Hello Everyone,
My moto g phone suddenly started giving errors saying "unfortunately "xxxxx" not working. xxxx is like google play and many more system services. I cannot do anything as it gives the error continuously.
I was trying to factory reset the mobile and I got the error of "boot up failed". I searched for this and found out that I need to go for custom recovery(I'm new to this) to avoid this error and get my phone back to normal.
I found that I need to unlock boot loader to for custom recovery. After trying and searching a lot I managed to do that finally with the help of a thread in this forum.
From that time I tried with many img files like TWRP, CWM and philz. But, still I could not manage to get my phone back to work.
Last 3 days I was fully in to this searching and finding solution and finally thought to write here(I'm not feeling to give up on this). I can provide you with any information needed.
I read in some guidance of CWM recovery that I need to get CWM model to process further after the below command.
Code:
fastboot flash recovery recoveryimage.img
Instead my screen stays with the below content for whatever .img file I pass for the above command
"Android system recovery
LXB22. 46-28. 1"
Appreciate any help or support on this to get my phone back to work. Thanks in advance
Click to expand...
Click to collapse
Rename the twrp or cwrecovery as recovery and copy to adb folder. Fastboot command is
fastboot flash recovery recovery.img, (not fastboot flash recovery recovery image .img)
pradeeppk said:
Rename the twrp or cwrecovery as recovery and copy to adb folder. Fastboot command is
fastboot flash recovery recovery.img, (not fastboot flash recovery recovery image .img)
Click to expand...
Click to collapse
it is not "recoveryimage". I just used it for this question. I tried with many files. So, I gave the name of the file and used the command and I got the success message also in CLI saying "Okay" and finished. But no file made any difference to device.
I had a pass code to unlock my screen. Two times I was able to get the screen (Other times it become dark after loading M) and it required the authentication code I gave to enter unlock screen. and I was filled with errors showing continuously "unfortunately not loaded 'system files' ". I suspect that whether the flash worked properly because it was asking for the screen unlock code.
So i was changing roms, and when i did this i accidently flashed the wrong boot image. After that i boot into a green screen with a red and blue squares then a message following it "boot image verify fail, please update to the authorized images. I can boot into fastboot recovery but i have no access through adb, i can preform a few adb amd fastboot commands but cannot flash or access my phone. It also boots into Huawei eRecovery and will let me try to download the latest recovery but fails each time, no matter if its highspeed internet or hotspot i always get a download failed message, can anyone help me out? I miss my x5 already and have tried almost everything i can and have done research on.
Asus zenfone 2 laser Z00ED(ze500kl) "Errorr: Can't load invalid boot image!"
well, first i was stuck at asus logo, then after some research, i sideload update a stock rom (UL-ASUS_Z00E-WW-13.10.10.44-user) from official site. after reboot, i am getting an error message "cant load invalid boot image" again i did some research and found a fix that involves cmd execution "fastboot boot boot.img" boot.img from the stock rom. that fixed the problem.. but when i turn-off/reboot, it shows the same error message "cant load invalid image " . is there any other way to fix this.
there is another stock rom (UL-ASUS_Z00E-WW-13.1010.1612.53-user) in asus site if i update that, will it solve this?
thanks in advance
I recently unlocked my bootloader on my sprint oneplus 7 pro 5g, but i screwed up afterwards and accidentally wiped the entire system, i've tried msm downloader and reflashing to no avail. sometimes when i reboot the boot loader it gives me the unlocked warning screen extremely briefly before entering the boot loader again. when i try to boot into twrp using fastboot it gives me a "remote: 'failed to load/authenticate boot image: load error" however occasionally the boot image will send but it wont actually boot it just gets stuck on the oneplus logo fastboot mode screen. When i try to use msmdownload tool it gives me a "device not match image" message. i've also attempted to reflash every partition individually by unpacking the oxygenOS zip and flashing each image one at a time. immediate assistance would be greatly appreciated.
aero_dreams said:
I recently unlocked my bootloader on my sprint oneplus 7 pro 5g, but i screwed up afterwards and accidentally wiped the entire system, i've tried msm downloader and reflashing to no avail. sometimes when i reboot the boot loader it gives me the unlocked warning screen extremely briefly before entering the boot loader again. when i try to boot into twrp using fastboot it gives me a "remote: 'failed to load/authenticate boot image: load error" however occasionally the boot image will send but it wont actually boot it just gets stuck on the oneplus logo fastboot mode screen. When i try to use msmdownload tool it gives me a "device not match image" message. i've also attempted to reflash every partition individually by unpacking the oxygenOS zip and flashing each image one at a time. immediate assistance would be greatly appreciated.
Click to expand...
Click to collapse
Have you checked out this and tried this?
https://forum.xda-developers.com/oneplus-7-pro/how-to/sprint-msmdownloadtool-unbrick-t3989841/amp/
Sent from my OnePlus 7 Pro using Tapatalk
aero_dreams said:
I recently unlocked my bootloader on my sprint oneplus 7 pro 5g, but i screwed up afterwards and accidentally wiped the entire system, i've tried msm downloader and reflashing to no avail. sometimes when i reboot the boot loader it gives me the unlocked warning screen extremely briefly before entering the boot loader again. when i try to boot into twrp using fastboot it gives me a "remote: 'failed to load/authenticate boot image: load error" however occasionally the boot image will send but it wont actually boot it just gets stuck on the oneplus logo fastboot mode screen. When i try to use msmdownload tool it gives me a "device not match image" message. i've also attempted to reflash every partition individually by unpacking the oxygenOS zip and flashing each image one at a time. immediate assistance would be greatly appreciated.
Click to expand...
Click to collapse
Gm1920 or gm1925? Pm sent.
hi....i'm having the same problem....everything was working until i flashed majick in twrp and then got stuck in fastboot......and nothing will work....thanks in advance.....i have an account but my google account was compromised and lost all credentials.......thanks again for finding a way to unlock the bootloader