Related
Is anyone having problems getting true usb 3 speeds when connecting their Nexus 5's to windows with the usb cable ?
Everytime I connect my nexus 5 to any of my usb 3 ports on my pc windows keeps saying this device can perform faster if connected to a usb 3 port when in fact it is ???
I've connected my corsair flash voyager usb 3 stick to eliminate and port or driver issues and the usb stick is working fine and usb 3 transfer speeds and I don't get nagged at by windows saying it can perform faster, so is there something wrong with the usb stack driver from this phone or android 4.4 ?
Ady1976 said:
Is anyone having problems getting true usb 3 speeds when connecting their Nexus 5's to windows with the usb cable ?
Everytime I connect my nexus 5 to any of my usb 3 ports on my pc windows keeps saying this device can perform faster if connected to a usb 3 port when in fact it is ???
I've connected my corsair flash voyager usb 3 stick to eliminate and port or driver issues and the usb stick is working fine and usb 3 transfer speeds and I don't get nagged at by windows saying it can perform faster, so is there something wrong with the usb stack driver from this phone or android 4.4 ?
Click to expand...
Click to collapse
Your problem sounds rather odd....The Nexus 5 is not a usb 3.0 device to begin with...the only cell phone on the market with usb 3.0 is the Note 3
HiddenSanctum said:
Your problem sounds rather odd....The Nexus 5 is not a usb 3.0 device to begin with...the only cell phone on the market with usb 3.0 is the Note 3
Click to expand...
Click to collapse
That's a good question,indeed it's micro usb port which is only usb 2.0 I've done a bit of digging and it seems the SOC of the nexus 5 supports usb 3.0 so google need to fix their firmware as to stop it reporting that the device can perform faster when connected to a pc.
This is usually caused by bad drivers on the PC, not the phone.
My phone works just fine when plugged into USB 3.0, no prompts, no issues. Note that this phone won't actually run at USB 3.0 speeds, but it will run just fine otherwise. Smartphones do not need USB 3.0 as none of them are even remotely fast enough to make use of it right now.
Ady1976 said:
Is anyone having problems getting true usb 3 speeds when connecting their Nexus 5's to windows with the usb cable ?
Everytime I connect my nexus 5 to any of my usb 3 ports on my pc windows keeps saying this device can perform faster if connected to a usb 3 port when in fact it is ???
I've connected my corsair flash voyager usb 3 stick to eliminate and port or driver issues and the usb stick is working fine and usb 3 transfer speeds and I don't get nagged at by windows saying it can perform faster, so is there something wrong with the usb stack driver from this phone or android 4.4 ?
Click to expand...
Click to collapse
Same problem here.
Vincent Law said:
My phone works just fine when plugged into USB 3.0, no prompts, no issues.
Click to expand...
Click to collapse
Dito here.
Vincent Law said:
This is usually caused by bad drivers on the PC, not the phone.
My phone works just fine when plugged into USB 3.0, no prompts, no issues. Note that this phone won't actually run at USB 3.0 speeds, but it will run just fine otherwise. Smartphones do not need USB 3.0 as none of them are even remotely fast enough to make use of it right now.
Click to expand...
Click to collapse
That's odd,all my other usb 3 devices are working just fine,it's only the nexus 5 that is saying that on plugging in, i agree it is bad drivers but not from my pc,it's the firmware on the nexus, if it's not a usb 3 device then the firmware shouldn't be sending out the wrong commands.
Ady1976 said:
Is anyone having problems getting true usb 3 speeds when connecting their Nexus 5's to windows with the usb cable ?
Everytime I connect my nexus 5 to any of my usb 3 ports on my pc windows keeps saying this device can perform faster if connected to a usb 3 port when in fact it is ???
I've connected my corsair flash voyager usb 3 stick to eliminate and port or driver issues and the usb stick is working fine and usb 3 transfer speeds and I don't get nagged at by windows saying it can perform faster, so is there something wrong with the usb stack driver from this phone or android 4.4 ?
Click to expand...
Click to collapse
same problem here.
Vincent Law said:
This is usually caused by bad drivers on the PC, not the phone.
My phone works just fine when plugged into USB 3.0, no prompts, no issues. Note that this phone won't actually run at USB 3.0 speeds, but it will run just fine otherwise. Smartphones do not need USB 3.0 as none of them are even remotely fast enough to make use of it right now.
Click to expand...
Click to collapse
USB3.0 charges 1.5x faster than USB2.0 if i remember correctly
Same here! Reports usb3 in win7 and win8.1 pretty anoying
Sent from my Nexus 5 using xda app-developers app
This would be a driver issue. And besides, the cable that comes with the device isn't USB 3.0 compatible.
magictwins said:
USB3.0 charges 1.5x faster than USB2.0 if i remember correctly
Click to expand...
Click to collapse
it uses same usb charging mode as in usb2.0 port and not ac charging mode here on intel h77 usb3.0 chipset. i wish it could fast charging with 1a when plugged in at usb3.0 port, unfortunately it's not.
bitdomo said:
Same here! Reports usb3 in win7 and win8.1 pretty anoying
Click to expand...
Click to collapse
+1 on same environment here. Not all operating systems are currently reporting of the warning, but the (minor) issue is present.
So does mine.
On a fresh windows installation.
Sent from my Nexus 5 using Tapatalk
Any Resolution
Hi,
I am also facing the same issue. Any one resolved it.
Thanks,
Arindam
Hello everyone.
I wonder if I could somehow transfer files from an Android phone to another one using its OTG capabilities and a USB cable. (not over wifi, bluetooth etc.)
I need this because I have Nexus 4 (8gb) and another phone with microsd slot, which I could use for storage purposes.
212th said:
Hello everyone.
I wonder if I could somehow transfer files from an Android phone to another one using its OTG capabilities and a USB cable. (not over wifi, bluetooth etc.)
I need this because I have Nexus 4 (8gb) and another phone with microsd slot, which I could use for storage purposes.
Click to expand...
Click to collapse
do you have card reader and OTG cable ???
Sakthivel_Subbiah said:
do you have card reader and OTG cable ???
Click to expand...
Click to collapse
I know what you're trying to say, but Nexus 4 doesn't support OTG (without external power). But my another phone does, so I want to send files from it to Nexus 4.
If I connect one device to another, it starts to charge and says it got connected via USB and after a while it stops charging..
212th said:
If I connect one device to another, it starts to charge and says it got connected via USB and after a while it stops charging..
Click to expand...
Click to collapse
I meant the Y-OTG cable for nexus 4.. Does it shows turn on the USB connection on another phone ?
Sakthivel_Subbiah said:
I meant the Y-OTG cable for nexus 4.. Does it shows turn on the USB connection on another phone ?
Click to expand...
Click to collapse
I connect the OTG cable end to xperia neo and other end to Nexus 4. It starts charging it and then stops, but USB connection persists.
Try this...
212th said:
I connect the OTG cable end to xperia neo and other end to Nexus 4. It starts charging it and then stops, but USB connection persists.
Click to expand...
Click to collapse
Then open notification and turn on usb connection (android with usb as a hand turns orange) in your nexus 4. and mount usb storage on your xperia neo...
Sakthivel_Subbiah said:
Then open notification and turn on usb connection (android with usb as a hand turns orange) in your nexus 4. and mount usb storage on your xperia neo...
Click to expand...
Click to collapse
I did turn on USB connection on Nexus 4, but xperia neo doesn't see any usb devices.. It's probably because nexus 4 usb connection requires drivers to be installed.. seems like it would work only if it mounts as a regular flash drive
Hi I have the UK version of the Galaxy S7 SM-G930F on the O2 network running Android 6.0.1
Baseband:- G930FXXU1BPJG
Build :- MMB29K.G930FXXS1BPLD
I have tried to connect it to windows 10 using both Smart Switch and Kies 3 and both time my laptop doesn't seem to recognise the handset. When i plug in my Samsung USB cable the handset charges but nothing else happens. I don't even get an error message saying my handset can't be recognised.
I have updated Kies too the latest version and the USB drivers.
Any ides / solutions to my problem?
Thanks
Try different USB cable / USB port
Charging connectors are separate to the data connectors so it could charge and not be seen by the machine if they are damaged
so what does that mean?
rkidcd911 said:
so what does that mean?
Click to expand...
Click to collapse
What does it sound like it means?
Try a new usb cable or usb port as I already said
When you connect your phone using your cable to the PC charge your phone?
If so, go to developer options; scroll down until you see USB configuration and change it to MTP rather than Charging.
If that doesn't work, try using a cable that is used for syncing as the current cable you are using may only have the purpose of just charging devices.
Sent from my SM-G930F using XDA Labs
i have done it makes no differeence
rkidcd911 said:
i have done it makes no differeence
Click to expand...
Click to collapse
Might need the phone USB port repairing or replacing then
Dropped it or had it in water?
try changing USB configuration and change it to MTP/file transfer. also while connected look in device manager on your laptop for any unrecognised device. you can use window troubleshoot to search for any drivers you might need
Same issue ,but in Windows 7
I recently bought a Google Pixel it's all working fine
But when I plug it on my PC it doesn't get recognized even though the phone is charging I don't get any notification that the phone is plugged through USB I have all the drivers installed
Here are the errors I'm getting: "Unknown USB Device (Device Descriptor Request Failed)" and "Windows has stopped this device because it has reported problems. (Code 43)" please help I've moved from iOS recently I don't want to refund I freaking love this phone! and i'm starting to get desperate.
Thanks
Not for the Pixel 2 but I thought it'd be the same case plus I need help ASAP cause I'm leaving country soon!
Are you connecting it using the cable that it came with? If you are, try a different port or reboot your phone and see if that helps. You can also get into the developer settings and tell it to MTP rather than USB Charging. Sometimes that helps. You can also try different cables, (if desktop) use the usb ports on the back of the computer rather than the front.
nolimit78 said:
Are you connecting it using the cable that it came with? If you are, try a different port or reboot your phone and see if that helps. You can also get into the developer settings and tell it to MTP rather than USB Charging. Sometimes that helps. You can also try different cables, (if desktop) use the usb ports on the back of the computer rather than the front.
Click to expand...
Click to collapse
Yeah I did it all. It just doesn't wanna work
The cable it comes with is garbage. Use that only for charging and go buy a good USB C or USB A to C cable (for transfer, adb, etc. I've had better luck with the A to C cables).
clcdev said:
The cable it comes with is garbage. Use that only for charging and go buy a good USB C or USB A to C cable (for transfer, adb, etc. I've had better luck with the A to C cables).
Click to expand...
Click to collapse
I am using an original S8 one, tried with my friend's Google pixel original one and tried with a Chinese crap all three of em same ting
Make sure you are plugging into a USB 2.0 port. If all you have are 3.X ports you need to enable USB debugging in Developer options. If you are plugging into a desktop use the ports on the back of the machine.
Sent from my Pixel 2 using Tapatalk
PiousInquisitor said:
Make sure you are plugging into a USB 2.0 port. If all you have are 3.X ports you need to enable USB debugging in Developer options. If you are plugging into a desktop use the ports on the back of the machine.
Sent from my Pixel 2 using Tapatalk
Click to expand...
Click to collapse
Didn't work too. I never had this issue before when I had an iPhone
fr3akfr0m said:
Didn't work too. I never had this issue before when I had an iPhone
Click to expand...
Click to collapse
Perhaps you should have stuck with iOS then?
Sent from my Pixel 2 using Tapatalk
PiousInquisitor said:
Perhaps you should have stuck with iOS then?
Sent from my Pixel 2 using Tapatalk
Click to expand...
Click to collapse
It's too late for that now mate
I don't bother connecting with a cable. I use the free app 'Airdroid'. It gives you a url to use on your computer and as long as both your phone and computer are on the same network you can see all your files, photos, messages etc. on your computer screen. Very easy to move files either way and do all sorts of other things. Very slick.
BTW, you don't need to setup an Airdroid account just skip that bit.
scgf said:
I don't bother connecting with a cable. I use the free app 'Airdroid'. It gives you a url to use on your computer and as long as both your phone and computer are on the same network you can see all your files, photos, messages etc. on your computer screen. Very easy to move files either way and do all sorts of other things. Very slick.
BTW, you don't need to setup an Airdroid account just skip that bit.
Click to expand...
Click to collapse
Nah I'm doing this so I can root n stuff
You don't need pc to recognize device as a drive via USB for file recognition to root and stuff. Just use adb push and pull. That's of course if it is recognized by adb. Mine is that way as not recognize mtp drivers but adb is fine
Sent from my Pixel 2 using my fingers on the keyboard.
I had the same issue when I first got my phone. Initially, the only way I was able to get it to work was plugging directly into a USB port on the PC....it wouldn't work on any USB hub. I ordered a Anker Powerline II cable (my hub was Anker so I figured it would have the best luck) and it worked. No other cable would work...not sure why. Also, I didn't have to enable debugging (I had tried that before and it still didn't work)...I was able to go into Settings and change USB from charge only to file transfer.
mikeynavy1 said:
I had the same issue when I first got my phone. Initially, the only way I was able to get it to work was plugging directly into a USB port on the PC....it wouldn't work on any USB hub. I ordered a Anker Powerline II cable (my hub was Anker so I figured it would have the best luck) and it worked. No other cable would work...not sure why. Also, I didn't have to enable debugging (I had tried that before and it still didn't work)...I was able to go into Settings and change USB from charge only to file transfer.
Click to expand...
Click to collapse
I'm plugging it into a port not a hub and it still doesn't wanna work
fr3akfr0m said:
I recently bought a Google Pixel it's all working fine
But when I plug it on my PC it doesn't get recognized even though the phone is charging I don't get any notification that the phone is plugged through USB I have all the drivers installed
Here are the errors I'm getting: "Unknown USB Device (Device Descriptor Request Failed)" and "Windows has stopped this device because it has reported problems. (Code 43)" please help I've moved from iOS recently I don't want to refund I freaking love this phone! and i'm starting to get desperate.
Thanks
Not for the Pixel 2 but I thought it'd be the same case plus I need help ASAP cause I'm leaving country soon!
Click to expand...
Click to collapse
I've had the same issue - it ended up being a bad cable.
I know you probably checked this, but... did you update the Google drivers on your PC? My phone wan't recognized until I installed the latest from Google.
Just use an a to c cable. If you're using the adapter that came with your pixel, it won't work. And yeah everyone else is right, use the 2.0 port
Apparently 8.1 fcuked up usb 3.x connections such that you can't even use them for data, only usb 2.0 for now, it's super annoying. There's an issue tracker for it if you want to star it.
I use Solid Explorer and the ftp server to connect to Win 10 for file transfers atm
I had the same problem. After I finally switched to my one USB 2.0 port, I was subsequently able to use my 3.0 ports again. It was a while ago, so I don't remember the details, but I think I updated the driver for the device that was reporting as active in Windows Device Manager while I was connected via the 2.0 port.
Usneato said:
I had the same problem. After I finally switched to my one USB 2.0 port, I was subsequently able to use my 3.0 ports again. It was a while ago, so I don't remember the details, but I think I updated the driver for the device that was reporting as active in Windows Device Manager while I was connected via the 2.0 port.
Click to expand...
Click to collapse
Would be interesting if you could share your driver info - no one I've seen online has fixed this!
Hello,
I recently installed the unit.
Tried to connect usb stick to usb 1 and it didn't recognized it.
Tried port 2 and it burned the usb stick!
Did anyone had this problem?
Is it possible to connect the usb to the wrong place at the back of the unit?
Any help would be most appreciated.
What did seller suggest when contacted for support
I'm going to measure the usb voltage and then contact the seller
Problem solved!
It appears to be that the usb 2 and 3 cable can be connected to the canbus connector.
Replaced to the right connector and the problem solved.
Marik d said:
Problem solved!
It appears to be that the usb 2 and 3 cable can be connected to the canbus connector.
Replaced to the right connector and the problem solved.
Click to expand...
Click to collapse
I have the same problem... but what about USB1??? It still not recognizing the USB stick? And do you have photos of the installation?
From what I understand, the 8 pin (canbus) can be used with the 6 pin (USB 2 and 3) , leaving the right 2 pins alone(unconnected)...
That's because the problem I have is that USB1 does charge my phone but there's no data transfer or recognizing USB stick... debugging off and USB configuration is in TRANSFER DATA.... but USB 2 and 3... when I connect my phone it show the charging logo for about 2 seconds... then... it stops charging, also no data transfer or recognizing the USB stick