Whenever i try the xperia pc companion repair tool, and I get to the part where i have to keep the volume down button pressed while inserting the usb cable, nothing happens.
More exactly, the green led light on my phone starts blinking green non stop, and will only stop if i force restart the phone (power button + vol up for 5 secs).
My phone os fully charged when i try this.
Does anyone have any suggestions? Am i the only one experiencing this?
Related
help my sony xperia z won't turn on no led not charging no vibration it happens when i was able to install the dual recovery CWM and TWRP when my phone is finish installing it required to reboot with it self but my phone is dosen't turn on with no led i press the power botton my phone is dosen't turn on i disconnect the usb cable and connect it again but my phone is still not turn on and ill try to press the power botton with volume up the red led is on but no vibration and no sreen reaction when i release the two bottons the red led is turn off and try to connect my usb cable the my pc and press power and volume up it's only give sound connect and disconnect in my pc but my phone is not detected i try to fash my phone with the fashtool when i do the press volume down and insert the usb cable my phone is not responding no led no screen but the fashtool is still waiting but my phone is not detected also i try pc compasion and SUS but my phone is can't enter to recovery mode anyone can help me this problem? i do charging my phone about 24hrs. but nothings happens any anyone help me pls.?
Hi guys, my Sony Xperia S won't turn after updating it in the PC Companion. It start's when the PC Companion said to turn off my phone then plug it again in the USB Cable while holding the Volume Down, after that. It's not proceeding in the next step (In the Updating mode) After that I unplug my phone and Turn it ON. but i can't turn it on. Then when i charge it it only shows red led. and i already tried the Volume Up + Power Button but nothing still happen's. Anyone can help me?
I have a Lg G Pro 2. Few days back it got bricked by its own( a crazy fact). That time it was showing QHSUSB_BULK. I figured it out as 9006. Took the phone to a local service shop. Today I got it back and found that nothing had happened to the phone, except worse. Now it is not detected by PC, only green light blinks for some time if tried to power on. And then everything is black and cold as death.
I think it have been flashed with wrong ROM. Anybody here can guide me with the test points of Lg G Pro 2 (D838 F350) ? So that I can force it to QHSUSB_BULK ? Or any step by step advice to get it up ?
I am in real need of assistance, and thanks in advance for any sort of help. Best Regards.
I would like to mention that the phone indicator blinks for sometime if I try to power it on, as it does on boot, but nothing else is there. No recognition by PC, no presence in Device Manager. Blinks for sometime, stops, again starts blinking... and this goes on at regular short intervals. The area around the camera gets warm after sometime. Everything loops till I pull off battery.
Now, am I missing something ? Is the problem not as deadly as I am thinking ? Is it soft bricked ?
Hi, I not sure how it got bricked I never brick LG device.
Normally if anything happen we try pull battery out and put it back in, try then to turn the phone on.
Have you try connect to to pc with USB cable, one end of USB connnect to pc and other end connect to the phone. Then try press Power + Volume Up or Power + Volume down, this is to try to get into phone download mode. If you can get into download mode you can flash the kdz file to make it useable again.
Or without the USB cable we want to get to factory reset mode by use hardware method try press:
- Power + Volume Up or Power + Volume down
- If you see LG logo come up release the buttons you press above 1-2 second
- Press again Power + Volume Up or Power + Volume down
- Until it show and ask to use volume up/down button to select choice, say yes
Caution factory reset will delete all data on the phone and reset it as when you bought it new.
- Again it will ask for factory reset, use Volume up/down to choose and select yes for factory reset
turn on the phone and when light is blink press volume up or down button for some time and see if it it is detected as usbhulq?
Hello everyone
Please help me
I have a Sony Xperia Z3 Dual D6633 with Android 4.4.4
Firmware is D6633_23.0.F.1.74_CE
I tried to install TWRP on my phone using this tutorial
https://forum.xda-developers.com/z3/development/root-stock-kernel-twrp-v01-test-28-09-t2889794?__utma=248941774.950623471.1412017766.1412017766.1412017766.1&__utmb=248941774.1.10.1412017766&__utmc=248941774&__utmx=-&__utmz=248941774.1412017766.1.1.utmcsr=l.facebook.com%7Cutmccn=(referral)%7Cutmcmd=referral%7Cutmcct=/lsr.php&__utmv=-&__utmk=228295838
Since the links in the thread are down it was hard for me to get the bootZ3dualmonxtest01.img file
But after an hour of googleing finally I got it from another Android forum https://mdforum.ru/showthread.php?t=16534
Then, as mentioned in the tutorial I went into bootloader / fastboot mode and entered following command
fastboot flash boot bootZ3dualmonxtest01.img
But it didn't work. Now my phone is bricked. It's powered off and I can't turn it on again
It doesn't respond to anything
Pressing Powerbutton - Nothing
Pressing Power + Volume Up/Down - Nothing
Hold Volume down and connect to PC - Nothing
Connect to 230V Adapter for charging - Nothing
ADB doesn't recognize the phone
Flashtool responds "Device disconnected"
So I can't flash back stock ROM
Please help me out. What went wrong? How can I fix it? Is it repairable or is my phone hard bricked?
Thank you for your answers
Edit:
After several hours of googleing and trying I found a solution that worked for me
Great thanks to StuartjG who posted the steps in this thread
https://forum.xda-developers.com/z3/help/z3-matter-t2945910/post61412021#post61412021
If someone else hase a similar problem this is what worked for me:
StuartjG said:
My Z3 would not power up and no charge LED when cable plugged in. Finally found this solution on Sonymobile support website which fixed my phone!
To force the device to restart
Detach the SIM card slot cover.
Using the tip of a pen or similar object, press and hold down the small OFF button (generally indicated by the text "OFF") until the device has emitted three vibrations, and then release the OFF button. The device turns off automatically.
Charge the device until a charging icon appears on the screen.
Turn on your Xperia™ device.
If a forced restart procedure as described above doesn't succeed in turning on your device, you should try another kind of forced restart - the 2-minute restart procedure.
To force a 2-minute restart
Detach the SIM card slot cover.
Using the tip of a pen or similar object, press and hold down the small OFF button (generally indicated by the text "OFF") for 120 seconds (ignoring any vibrations), and then release the OFF button.
Charge the device until a charging icon appears on the screen.
Turn on your Xperia™ device.
I had to hold the 'off' button for about 60 seconds before the phone vibrated and sprung into life - phew!
Click to expand...
Click to collapse
In my case there were no vibrations. I just held the button down for 120sec and it worked. Then I was able to flash back stock ROM
Is there any way to start xzp G8142, as power button and volume key stopped working and my phone is in switched off condition. Suggest a way to start using pc software or other way.
Buying new ones which works
Does the screen come on when you plug it in to charge? If it doesn't it might not be the buttons; phone might be dead. But, you can try applying pressure to the back of the phone right behind the power button while pressing the power button. I have an issue with my volume up button and doing that makes it work. Not sure it'll solve your issue but worth a try.
Solved.
Here's how for future reference if someone encounters a similar issue.
1. Disconnect battery and reconnect it
2. Download and install Xperia Companion Tool from Sony (tested on Mac, but the Windows version should work as well)
3. Choose Repair Software/Xperia on the Companion tool
4. Connect phone to computer using a USB cable
5. Disconnect phone when the Xperia splashscreen appears.
Done.