[Completed] error occured while installing twrp - XDA Assist

I want install twrp on my yureka plus I completer the all process but when I tried to power rest it it shows a message allow to read only and swipe I tried so many times but it doesn't work nothing is working so I think to uninstall it and again try it to hard reset but show the same message that teamwin and the same message swipe and allow to read only. What to do how to get rid it.

Amankg576 said:
I want install twrp on my yureka plus I completer the all process but when I tried to power rest it it shows a message allow to read only and swipe I tried so many times but it doesn't work nothing is working so I think to uninstall it and again try it to hard reset but show the same message that teamwin and the same message swipe and allow to read only. What to do how to get rid it.
Click to expand...
Click to collapse
Greetings and welcome to assist. Try rooting the phone and see if that helps, to remove twrp you will need to reinstall your factory firmware a reset will not remove it
Good Luck
Sawdoctor

Related

To respected members, experienced developers - need urgent help regarding galaxy tab

Hello,
to all of you.
I need urgent help, actually, some days ago, my Galaxy tab 7.7 has stuck in a bootloop, the respected user UpInTheAir has helped me a lot by providing a needy guidance to me, actually, I didnt want to factory reset the tab because the data stored on the tab was very important, you can read more about this case here : http://forum.xda-developers.com/showthread.php?t=2530591, I tried very very hard to load custom recovery to the tab, so that I can take backup of the data, but all was vain, I even downloaded the official firmware and tried to flash the tab through desktop odin, and got successful messages of pass etc.but when the tab restarts they show the same symptom of bootlooping and all my data is still available on the tab, although I can start my tab in the safe mode, but that is also for 5 to 7 minutes after that it restarts automatically, during this time I can also connect my tab to computer and it shows there, so today I decided to reset the tab to get rid of this problem, I boot into the stock recovery and there choose the option wipe data/factory reset, it was successfully implemented but when I reboot my tab, it shows the same symptom of bootlooping as well as all my data is still present, same starting, same password, then I restart my tab in safe mode and choose the factory reset option from there, it restarts my tab into the stock recovery, there I again choose the option of wipe data/factory reset, but same happens, I dont know what happened to my tab, I think this is some kind of bug, because everything goes well just after restart the tab, everything comes out same as nothing happens.Please respected members, respected developers help me, I really need this.Suggest some way to me, so that I can get out of this problem.Hope to see reply soon.Thank You.
Regards,
MOBILGEEK6
MOBILGEEK said:
Hello,
to all of you.
I need urgent help, actually, some days ago, my Galaxy tab 7.7 has stuck in a bootloop, the respected user UpInTheAir has helped me a lot by providing a needy guidance to me, actually, I didnt want to factory reset the tab because the data stored on the tab was very important, you can read more about this case here : http://forum.xda-developers.com/showthread.php?t=2530591, I tried very very hard to load custom recovery to the tab, so that I can take backup of the data, but all was vain, I even downloaded the official firmware and tried to flash the tab through desktop odin, and got successful messages of pass etc.but when the tab restarts they show the same symptom of bootlooping and all my data is still available on the tab, although I can start my tab in the safe mode, but that is also for 5 to 7 minutes after that it restarts automatically, during this time I can also connect my tab to computer and it shows there, so today I decided to reset the tab to get rid of this problem, I boot into the stock recovery and there choose the option wipe data/factory reset, it was successfully implemented but when I reboot my tab, it shows the same symptom of bootlooping as well as all my data is still present, same starting, same password, then I restart my tab in safe mode and choose the factory reset option from there, it restarts my tab into the stock recovery, there I again choose the option of wipe data/factory reset, but same happens, I dont know what happened to my tab, I think this is some kind of bug, because everything goes well just after restart the tab, everything comes out same as nothing happens.Please respected members, respected developers help me, I really need this.Suggest some way to me, so that I can get out of this problem.Hope to see reply soon.Thank You.
Regards,
MOBILGEEK6
Click to expand...
Click to collapse
Hello,
to all of you.
I posted this thread in the hope to getting some help from some respected member, but after so many views, I think no one is willing to help, anyways, it seems the experienced developers and most respected members are busy in making their custom roms better, anyways, I hope some "NOOB" from some part of the world will help to solve my problem and able me so that I can install the custom rom from some "Experienced Developer".Thank You.
Regards,
MOBILGEEK
I don't think u can do anything about ur data. Too bad u'll be losing it.
Android 4.1.2 has already come out for our tablet. U can download either the Singapore, Malaysian or Indonesian version.
Flash the latest firmware via Odin.
Then go to stock recovery and clear cache and clear all data.
That'll give u a clean install. At least ur tablet will no longer bootloop. That's the only way that I can think of.
After that u can flash either a cwm or twrp recovery.
Remember to always keep a n android backup somewhere...
Buy a valid copy of titanium back up.
By the way, if u still have a cwm recovery installed, go to advanced and try clearing dalvik cache too.
Sent from my GT-N7100 using Tapatalk

[Completed] Galaxy trend s7560m stock recovery not wiping data after wipe process completed

Hi guys
Im having a very weird issue with my galaxy trend, i want to do a factory reset because the device keeps restarting, it boots normallly but it restarts every time after 2 minutes. So i boot into recovery and perform a wipe data/ factory reset (the device is on stock recovery and firmware) as usual and it completes without any errors but when it boots nothing is erased, even the screen lock pattern, wallpaper, apps, everything is there. If i repeat the process i get the same results every time, by the way, i cant factory reset from the backup and reset option on andoid, it gets stuck on the erase everything button and pressing it does nothing.
Do anyone know why this could be happening?
Im downloading the stock firmware and flashing it through odin to see if that works, any help would be very much appreciated
nexware said:
Hi guys
Im having a very weird issue with my galaxy trend, i want to do a factory reset because the device keeps restarting, it boots normallly but it restarts every time after 2 minutes. So i boot into recovery and perform a wipe data/ factory reset (the device is on stock recovery and firmware) as usual and it completes without any errors but when it boots nothing is erased, even the screen lock pattern, wallpaper, apps, everything is there. If i repeat the process i get the same results every time, by the way, i cant factory reset from the backup and reset option on andoid, it gets stuck on the erase everything button and pressing it does nothing.
Do anyone know why this could be happening?
Im downloading the stock firmware and flashing it through odin to see if that works, any help would be very much appreciated
Click to expand...
Click to collapse
Hello,
You may try posting your query here Ask any Q Noobfriendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Vatsal said:
Hello,
You may try posting your query here Ask any Q Noobfriendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Click to expand...
Click to collapse
I'll try posting there, anyway i don't have any hope left in the device, tried flashing stock rom via odin and it still doesn't do anything.
Doing some research on google it seems to be a hardware problem on the flash memory and only solution is replacing the mainboard
What i don't understand is why it doesn't give me any error when doing the factory reset when in reality the phone has not deleted anithing. I got a similar issue with a galaxy s4 that refused to write anything to it pretty much exactly as this device and gave up on it.

[Completed] Rooted Innjoo One 3G softbricked, undetectable on SP Flashtool, etc. PLEASE HELP!!!

So, last week I got my phone rooted using Kingroot. I use an Innjoo One 3G HD phone. A couple of days later, I wanted to try out SuperSU. I installed it and it prompted me to get rid of the KingUser first. It gave me 2 options. The first option was a faster, more convenient approach. It suggested installing SuperSUME which would help me to be able to uninstall Kingroot. So, I installed SuperSUME and initiated the process of uninstalling Kingroot. After SuperSUME prompted me that it had successfully completed the process, it automatically opened up SuperSU. However, as SuperSU attempted to run, it prompted me to restart my phone. I restarted my phone, opened SuperSU again to run it again, I still got the same prompt to restart my phone. This happened like 3 times. Then I went back into SuperSUME to repeat what I had done before. This time however I noticed that the progress bar couldn't go beyond ''installing SuperSU''. I should note here that at this time, the notification bar could no longer pull down. Even when I tried to get into settings using the icon in the app drawer, it would attempt to open up and immediately close up again. I backed out of SuperSUME and then uninstalled SuperSU hoping this would make it easier to for SuperSUME to reinstall it. I had no progress. I restarted my phone hoping that a reboot would get things working fine. When the phone restarted I got a blank black screen. I pressed the volume rocker a couple of times, but nothing showed up on the screen, except this error message ''Android system is not responding. Do you want to close it?'' I restarted a few more times, but I couldn't get past the black screen. At a point I couldn't even get to the black screen anymore. I didn't get beyond the bootloop. I have searched the internet for possible solutions, attempted a couple of suggestions that seemed to make sense, like wiping data/factory reset, install from SD card, install from ADB, flash using SP Flash Tool, nothing seems to have worked yet. My device can't even be detected by my SPFT even after installing updated USB drives. I didn't enable debugging on my phone, so Android SDK Platform tools can't my device. Right now, I'm blank, not sure what else to do than look for help here. I'd be very grateful to get some help here, PLEASE :crying:
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist

[Completed] One plus 3t recovery boot loop

I was trying to fix my google play "no connection error" but it didn't work so i just reset my phone to factory settings as a last resort to try and fix this problem. It restarted in recovery mode i thought this was just a procedure and i just hit reboot -> system. it rebooted again into recovery mode i checked if there were any stuck volume rockers but there aren't any, help?
(FYI: one plus 3T: Rooted)
(FYI: link to what i used to try and fix my google play store:https: //forum.xda-developers.com/showthread.php?t=2273994)
TrappleV3 said:
I was trying to fix my google play "no connection error" but it didn't work so i just reset my phone to factory settings as a last resort to try and fix this problem. It restarted in recovery mode i thought this was just a procedure and i just hit reboot -> system. it rebooted again into recovery mode i checked if there were any stuck volume rockers but there aren't any, help?
(FYI: one plus 3T: Rooted)
(FYI: link to what i used to try and fix my google play store:https: //forum.xda-developers.com/showthread.php?t=2273994)
Click to expand...
Click to collapse
Greetings and welcome to assist. It looks like you have already asked your question in the correct forum here
https://forum.xda-developers.com/showthread.php?t=3532524
so I'll close this one up
Good Luck
Sawdoctor

[Resolved] [SM-T210] Wiped everything don't know what to do

Hello, i've bought this Samsung SM-T210 like 3 years ago, i rooted it as soon as i got it and after a year or so i decided to go back to factory settings cos of too many trash files anyway as far as i can remember i've select the wipe data or somethin and it got stuck on "Boot Loop" thingy only samsung logo comes up over and over again till i turn it off so i have tried every single solution that i can find on google and forums best i could do was getting it out of boot loop, now it just directly boots into TWRP and i can not do anything over there can't install any roms nothing whenever i try to install somethin it just gives me bunch of errors with cant find cache, data etc . i saw people had same problem and they got solutions by installing a new os, rom whatever it's called, i know how to follow the instructions but those solutions about my problem didn't help at all, now after a year i've decided to fix it again do u guys have any other solutions about this ? i'm waiting for it the charge up gonna list the errors i get on each section of twrp. :crying: :crying: :crying:
When i press (power+home) i'm only getting a text on bottom left corner says POWER UPLOAD REASON: POWER KEY H/W REVISION : 0.3
(vlm down+power+home) only gets me to the black screen nothing comes up
(vlm up+power+home) TWRP interface
power key by itself does nothing anymore.
----
******i had access to download mode via adb by using "adb reboot download"
i tried to install my firmware using odin and surprisingly it started to work again and im sure i've tried this billions of time.***********
semavi said:
Hello, i've bought this Samsung SM-T210 like 3 years ago, i rooted it as soon as i got it and after a year or so i decided to go back to factory settings cos of too many trash files anyway as far as i can remember i've select the wipe data or somethin and it got stuck on "Boot Loop" thingy only samsung logo comes up over and over again till i turn it off so i have tried every single solution that i can find on google and forums best i could do was getting it out of boot loop, now it just directly boots into TWRP and i can not do anything over there can't install any roms nothing whenever i try to install somethin it just gives me bunch of errors with cant find cache, data etc . i saw people had same problem and they got solutions by installing a new os, rom whatever it's called, i know how to follow the instructions but those solutions about my problem didn't help at all, now after a year i've decided to fix it again do u guys have any other solutions about this ? i'm waiting for it the charge up gonna list the errors i get on each section of twrp. :crying: :crying: :crying:
When i press (power+home) i'm only getting a text on bottom left corner says POWER UPLOAD REASON: POWER KEY H/W REVISION : 0.3
(vlm down+power+home) only gets me to the black screen nothing comes up
(vlm up+power+home) TWRP interface
power key by itself does nothing anymore.
----
i had access to download mode via adb by using "adb reboot download"
i tried to install my firmware using odin and surprisingly it started to work again and im sure i've tried this billions of time.
Click to expand...
Click to collapse
I don't understand.
You're saying that you successfully flashed it with your firmware and it started working. Does this mean you don't have an issue now? Or is there still a problem?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
yea i couldnt even open up the download mode it was saying RUN RDX TOOL but i just ignored whatever it says and tried to install it with odin till it succeeds after a few tries it just completed the installation and simply started to running.

Categories

Resources