Click the link below for downloads.
Bootloader : Zippyshare
CSC : Zippyshare
What country is this csc for?
Swordfish
Australia .
I will upload the ROM in one-two days. Busy with work and mega.nz is having issues.
tids2k said:
Australia .
I will upload the ROM in one-two days. Busy with work and mega.nz is having issues.
Click to expand...
Click to collapse
OXA region - Australia? Are you sure?
After HARD RESET my watch show Russian language.
If CSC from Australia would be very good ...
I will check again and let you know. If its not I will try to dd the partition from my watch and attach it here.
Does this support gear pay?
tids2k said:
I will check again and let you know. If its not I will try to dd the partition from my watch and attach it here.
Click to expand...
Click to collapse
I have SM-R760 and i cannot use Gear Pay, would be great if this did support here in Sydney
For check CSC version input *#12580*369#
se47 said:
For check CSC version input *#12580*369#
Click to expand...
Click to collapse
Can someone in the US check and tell me what version you have? In Canada, we have OXA.
michaeldanielbourke said:
I have SM-R760 and i cannot use Gear Pay, would be great if this did support here in Sydney
Click to expand...
Click to collapse
Wrong forum area. This is for development. Check the Question and Answer area.
Sword Fish said:
Can someone in the US check and tell me what version you have? In Canada, we have OXA.
Click to expand...
Click to collapse
I'm from Norway, but bought my watch in Louisiana, USA in November.
I've got R760OXA1APK7. (USA)
Us csc:r7600xa1apk7
(sgp) ap: R760xxu1apk7
csc: R760oxa1apk7
Any luck getting the R770 (Gear S3 Classic) Firmware?
I will post both firmwares over the weekend.
Samsung pay is only compatible with AMEX and Citibank cards in Australia.
So can we do anything with these yet? Is it possible to flash from one region to another? I think I was misled into buying an international version since I can't get Samsung Pay working.
I'm not sure if the modem from AT &T would be any help. It might brick the watch.
tids2k said:
I will post both firmwares over the weekend.
Click to expand...
Click to collapse
Thanks! I See it's in progress!
SirBindy said:
So can we do anything with these yet? Is it possible to flash from one region to another? I think I was misled into buying an international version since I can't get Samsung Pay working.
Click to expand...
Click to collapse
Cross flashing is very risky. It can brick your watch. Im very excited to see somone has a look at the modem for the R-765A model. Not good with IDA or any other assembly. I hope some kind soul will look into adding su support and also disect the modem.bin for any hacks.
Also with the LTE service we need to use an extended eSim profile to be loaded onto the watch.
See here :
tids2k said:
Cross flashing is very risky. It can brick your watch. Im very excited to see somone has a look at the modem for the R-765A model. Not good with IDA or any other assembly. I hope some kind soul will look into adding su support and also disect the modem.bin for any hacks.
Also with the LTE service we need to use an extended eSim profile to be loaded onto the watch.
See here :
Click to expand...
Click to collapse
I ended up bricking my R770 by flashing the R765 firmware to it. It worked fine with the R760 firmware. I figure since the R765 has the LTE modem and such, it didn't like that one.
Related
I have a Gear S2 Classic bought from Iran and I want to use Samsung pay on it.
I am currently living in the US and want to flash US firmware on my S2 to be able to use Samsung pay.
Possible?
I have an SM-R732
Interceptor777 said:
I have a Gear S2 Classic bought from Iran and I want to use Samsung pay on it.
I am currently living in the US and want to flash US firmware on my S2 to be able to use Samsung pay.
Possible?
I have an SM-R732
Click to expand...
Click to collapse
No one? really? is this even possible tho?
interceptor777 said:
no one? Really? Is this even possible tho?
Click to expand...
Click to collapse
thanks for all the help people.
.
parrotgeek1 said:
try this
http://forum.xda-developers.com/gear-s2/general/tutorial-downgrade-gear-s2-sport-t3334123
But instead of flashing the rom from that link, use XAR region rom from sammobile firmware site
Click to expand...
Click to collapse
There isn't any firmware for the gear S2 Classic on Sammobiles website.
Any idea where I can find it?
.
Can anyone please share that R760XXU2BQH1 firmware link for download..?
At the moment nobody want share...
Depend on how much you need it and/or how long you can wait...
In theory Tizen 3 Upgrade is incoming... but it is not clear if we can expect this year... or in 2018...
If it is urgent... then you could choose between:
Code:
BQG4
and/or
BQH1
https://forum.xda-developers.com/showpost.php?p=73518347&postcount=297
https://forum.xda-developers.com/showpost.php?p=73603988&postcount=298
I have none of these files... I am waiting and searching like you...
Best Regards
aslam4580 said:
Can anyone please share that R760XXU2BQH1 firmware link for download..?
Click to expand...
Click to collapse
Wait R760 got a new firmware update? Mind still has BQC5 ending.
Mind still has BQC5 ending.
Click to expand...
Click to collapse
Reason is because Samsung have 1000000 of "different" CSC...
Ask Samsung, why they are not able to support few devices at same time...
http://doc.samsungmobile.com/SM-R760/KOO/doc.html
http://doc.samsungmobile.com/SM-R760/CHC/doc.html
KOO is for Korea... CHC is for China...
No idea why I can not find DBT or XAR Changelog...
This is also strange... why Samsung can not do this for all CSC..
Komischer S..haufen.
S for Samsung...
Best Regards
adfree said:
Reason is because Samsung have 1000000 of "different" CSC...
Ask Samsung, why they are not able to support few devices at same time...
http://doc.samsungmobile.com/SM-R760/KOO/doc.html
http://doc.samsungmobile.com/SM-R760/CHC/doc.html
KOO is for Korea... CHC is for China...
No idea why I can not find DBT or XAR Changelog...
This is also strange... why Samsung can not do this for all CSC..
Komischer S..haufen.
S for Samsung...
Best Regards
Click to expand...
Click to collapse
the main problem is oxa contain all the csc but still with that it is not possible by flashing firmware.i have tried but it did not workout.anyhow we need to wait for sammy to give.or if sammobile upload it then only it might work.
Mines running BQI2. Had the watch for a month or so.
We have to differ between Model Name and CSC...
In your case... you have SM-R765T with Sales Code TMB:
Code:
R765TUVU3BQI2
ATT SM-R765A have also old Firmware... from April
Code:
R765AUCU2BQD4
These are LTE Versions with MODEM/CP...
Only as info.
Best Regards
Where can i find firmware download for gear a3 frontier SM-R760NDAAXAR ?
Hi,
How can check CSC of my gear s3 frontier. I m stuck on 2.3.2.3 and it always say u have the latest version already installed. Can someone help? i got as a gift and no idea where this belongs to as it was purchased from another owner.
SM R760
Current build : R760XXU2BQC5
Thanks
My CSC is OXA, as i found by dialing *#1234# on watch. Can someone confirm is OXA was updated or not?
How to identify product code??? i have box etc but needs help.
You are able to work with ADB?
If yes, then SDB is "same"...
No need of any "Box"... as SDB works also over WiFi...
Btw...
Only few CSC at the moment have Tizen 3 updates...
MOST other CSC still on BQC5 or BQH1...
Code:
KOO for Korea
XAR for USA
These are confirmed CSC at the moment...
So you are not alone.
Best Regards
Thanks a million. Can you help me with SDB? where to get and use.. any code to check country? it says country of origin VEITNAM, and on box some other language is printed which is not english atleast
This is the box. Can you help
My fault...
I thought with Box you mean "Professional Tools"... like RIFF Box or Z3X Box...
I see russian... so it could be SER... as Sales Code...
http://fota-cloud-dn.ospserver.net/firmware/SER/SM-R760/version.xml
http://fota-cloud-dn.ospserver.net/firmware/SER/SM-R770/version.xml
SM-R760 and SM-R770 for SER still on BQC5... this is CORRECT...
To check if my idea is correct...
SDB + Instruction is here:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
Commands are here:
In old Tizen 2.3
Code:
vconftool get -t string db/csc/salescode
In CQK3 Tizen 3 Firmware this work:
Code:
cat /csa/csc/csc-active-customer.inf
Code:
cat /csa/imei/prodcode.dat
Simple Copy & Paste...
Best Regards
Will try sbd today and share feedback. Anyone knows when will users others than usa nd kor will get tizen 3. Any other simply way to update?? As i have heard that battery fix is also available
Hi,
I'm in the same situation like you. My Gear S3 Classic R770 (OXA) still running 2.3.2.3.
How can i force update it to Tizen 3?
We should not perform force update as CQK3 has been removed and it was hell buggy. Wait for the fixed OTA. Fingers crossed.
As per sammobile....updated tozen 3.0 has started rolling today again...for other regions in batches
adfree said:
My fault...
I thought with Box you mean "Professional Tools"... like RIFF Box or Z3X Box...
I see russian... so it could be SER... as Sales Code...
http://fota-cloud-dn.ospserver.net/firmware/SER/SM-R760/version.xml
http://fota-cloud-dn.ospserver.net/firmware/SER/SM-R770/version.xml
SM-R760 and SM-R770 for SER still on BQC5... this is CORRECT...
To check if my idea is correct...
SDB + Instruction is here:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
Commands are here:
In old Tizen 2.3
In CQK3 Tizen 3 Firmware this work:
Simple Copy & Paste...
Best Regards
Click to expand...
Click to collapse
Worked....my product code is CAC. UZEBEKISTAN STRANGE.... NEVER THOUGH I GOT A WATCH WITH THIS PRODUCT CODE.hehehehe
Sammobile says. Samsung is rolling out a new recised update but I have got nothing. Looka like Samsung is nout pushing tizen anymore
CAC is still on BQC5:
http://fota-cloud-dn.ospserver.net/firmware/CAC/SM-R760/version.xml
Nobody knows Samsung plans... nor can understand them...
Best Regards
https://www.sammobile.com/news/revised-tizen-3-0-update-for-gear-s3-rolling-out-now
This link gave a lot of hop yesterday but then no one yet confirmed the new update recently..disappointed..
Nothing new...
Same situation like few dayS before:
https://forum.xda-developers.com/showpost.php?p=74912522&postcount=232
Code:
KOO for Korea
XAC for Canada
XAR for US
These are the only 3 from over 80 CSC...
Others still on BQC5 or BQH1...
Best Regards
Same here. Sales Code for my Gear S3 Frontier (bought in Pakistan) is CAC. Nothing yet. Keeping fingers crossed.
adfree said:
CAC is still on BQC5:
http://fota-cloud-dn.ospserver.net/firmware/CAC/SM-R760/version.xml
Nobody knows Samsung plans... nor can understand them...
Best Regards
Click to expand...
Click to collapse
Actually samaing is trying to ensure a totally bug free update loosers really
Salman787 said:
Same here. Sales Code for my Gear S3 Frontier (bought in Pakistan) is CAC. Nothing yet. Keeping fingers crossed.
Click to expand...
Click to collapse
CAC is uzbek...so strange it should have been PAK
I bought it from Lahore Hafiz Center. Checked my sales code only when my watch failed to get the new update.
papubhai said:
CAC is uzbek...so strange it should have been PAK
Click to expand...
Click to collapse
---------- Post added at 09:42 AM ---------- Previous post was at 08:44 AM ----------
Hey Guys,
Check your updates. Just received mine. Specially the people with CAC Sales Code.
Hi all
Got a new Froniter s3 ( LTE) from Singapore. Hardly used it and after two days of use experience severe issues:
1. watch gets overheated when charging in cradle and watch is on. It can charge only when its off.
2. Sensors fail to work. I intended to use this mainly for sports and HR monitor is not functioning at all ( it uses to work for the first two days).
Other than that watch seems to work ok.
Here are the SW details:
Model: SM-R765FDAAXSP
Tizen- 3.0.0.2
SW version: R765FXXU2CRD2
Knox version: 2.2.0
SE 1.0.0
TIMA 3.0.0
I am out of Singapore and it seems too difficult communicating with Samsung support in Singapore ( there is no international warranty). Whats going on anyone can suggest?? I am so frustrated. I did factory reset more than once and also uninstalled all the Samsung apps from the phone. Nothing helps. I have not yet activated any LTE esim profile. Used the watch only as bluetooth
Can this happen due to a SW version? can I downgrade it? if yes, where can I get the version for the Spore version firmware?
thank you
Giora
CRD2 seems latest at the moment.
I have also Combination Firmware...
Code:
COMBINATION-FT30_R765FXXU2CRB1.tar.md5
And this Version for downgrade attempt:
Code:
R765FXXU2CRA1
CRD2 I have also...
PM me.
Best Regards
Can you read this post:
https://forum.xda-developers.com/showpost.php?p=77321708&postcount=1
And post result what you see after:
Code:
*#0*#
Best Regards
adfree said:
Can you read this post:
https://forum.xda-developers.com/showpost.php?p=77321708&postcount=1
And post result what you see after:
Code:
*#0*#
Best Regards
Click to expand...
Click to collapse
Hi
I have done the sensor hub test and here is what I see:
mcu firm br010
bin firm version bro118031200
bcm4774iub2g
FAIL
also when phone is on and charging it gets overheated with flashing exclamation mark. It can only get charged when off
I have not yet done any firmware change. Not wanting to void anything unless I know what to do..
Thank you for the help!!
Here is the Combination Firmware...
This is Factory/Service stuff...
https://www.file-upload.net/download-13298563/COMBINATION-FT30_R765FXXU2CRB1.tar.zip.html
netOdin +Infos + Videos are here:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
I will later upload the 2 Stock Firmware I have...
Best Regards
Thank you so much!
So I have downloaded the combination file. Does this include all types and I have to choose the one that suits my firmware?
I have unzipped it by could not see whats inside, only one MD5 file.
Thank you
Golmert
Code:
COMBINATION-FT30_R765FXXU2CRB1.tar.md5
Correct.
1 file
You see R765F inside Filename.
This means SM-R765F.
Choose this as AP in netOdin...
Later I will upload the other 2 Stock Firmware...
I suggest you first to test with Combination Firmware...
This is standalone Firmware... so no Phone connection required.
Maybe helpfull to check sensors...
Own risk!
Best Regards
https://www.file-upload.net/download-13299892/R765FXXU2CRA1_OLB.7z.html
CRA1 for downgrade attempt...
Best Regards
adfree said:
https://www.file-upload.net/download-13299892/R765FXXU2CRA1_OLB.7z.html
CRA1 for downgrade attempt...
Best Regards
Click to expand...
Click to collapse
Thank you very much! so if I try the combination which is supposed to be standalone with no phone, will I be able to connect it to a phone if it is working ok?
Please look at these Screenshots/Pics:
https://forum.xda-developers.com/showpost.php?p=74591475&postcount=13
Combination Firmware is Service/Factory Software... for """Repair"""...
I have no Crystal Ball if sensors will work again...
You can try... or wait for Samsung...
Your choice.
Your rown risk.
Best Regards
adfree said:
https://www.file-upload.net/download-13299892/R765FXXU2CRA1_OLB.7z.html
CRA1 for downgrade attempt...
Best Regards
Click to expand...
Click to collapse
Thank you very much!!!! will let you know how that goes...
golmert
Any kind of progress?
Best Regards
adfree thank you very much for the followup. I have still not done this , waiting for weekend...
You said that you also have the CRD2 right ?
BTW, just to make sure- these stock ROMS are carrier unlocked Right?
Thanks
Golmert
Thaks
golmert
You said that you also have the CRD2 right ?
Click to expand...
Click to collapse
Yes correct.
Code:
AP_R765FXXU2CRD2_usr.tar.md5
BL_R765FXXU2CRD2_usr.tar.md5
CP_R765FXXU2CRD2_CL806632_QB9592827_SIGNED.tar.md5
CSC_OLB_R765FOLB2CRD2_usr.tar.md5
I have uploaded 2 of 3 promised files/Firmware packages...
I will wait for next upload, after weekend... after your result...
From CRA1 FOTA should work to update back to CRD2... over the air.
BTW, just to make sure- these stock ROMS are carrier unlocked Right?
Click to expand...
Click to collapse
No idea what you mean with carrier unlocked...
Firmware(s) is for SM-R765F Singapore (XSP).
Samsung have only carrier locked Gear S3 devices... because this is eSim crap
This is why they did the funny thing with:
Code:
SM-R765A ATT for ATT only
SM-R765T TMB for T-Mobile only
SM-R765 Korea
SM-R765N New Zealand
SM-R765V Verizon...
You can only use your SM-R765F in Singapore for LTE...
There is no other valid Firmware for SM-R765F...
Best Regards
OK. But I thought that an esim profile can be downloaded with any carrier that supports it and then the watch can be used regardless of carrier, assuming of course that LTE band fits the country frequencies. So if I have this phone which is supporting my country LTE version, which is exactly like in Singapore, can't I activate a new esim profile? The watch I have is with no esim profile at the moment and allows me to download one.
This is rumour... better ""Running Gag""... IMHO.
I saw nobody have success...
Examples:
https://forum.xda-developers.com/gear-s3/how-to/discuss-how-to-creat-qr-code-to-t3758970
https://forum.xda-developers.com/gear-s3/help/singaporessm-r765flikes-download-t3748828
https://forum.xda-developers.com/gear-s3/help/frontier-lte-att-switching-providers-t3501589
.
.
.
Reason why I have these Firmwares for SM-R765F...
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
I am from Germany...
I never hold LTE Gear in my hand...
Next chance is... SM-R8xx series... (Galaxy Watch)
But seems to locked to T-Mobile and Vodafone...
But this thime I am not willing to spend money for Samsung...
Tizen 4 is also full of Bxgs and Quality Apps not increased... because all locked down in Tizen Eco System...
Best Regards
hi thank you for the details adfree. I am not sure what I do with several files for one firmware , but will need to check with you about this after I check the combination firmware.. Will keep you posted.
golmert
Hi I have a question about the combination and Netodine- what do I have to choose - which one do I have to check? BL,AP, CpP, CSC?
Thanks
Golmert
If Combination Firmware = SINGLE file = 1 file
Code:
COMBINATION-FT30_R765FXXU2CRB1.tar.md5
You can use AP... to select this 1 file.
In theory Odin accept also drag & drop... via Explorer...
Not tested yet with netOdin...
If 4 files...
Code:
[B]AP[/B]_R765FXXU2CRD2_usr.tar.md5
AP
Code:
[B]BL[/B]_R765FXXU2CRD2_usr.tar.md5
BL
Code:
CP_R765FXXU2CRD2_CL806632_QB9592827_SIGNED.tar.md5
CP
Code:
[B]CSC[/B]_OLB_R765FOLB2CRD2_usr.tar.md5
CSC
Important hint.
Please not change any settings in netOdin!
Use Standard Settings.
Best Regards
here is an update after combination firmware- the upload passed succesfuly.
When watch rebooted it shows once in a while Error - lhd stopped unexpectedly. When pressing OK it goes away and then comes back.
When going to test mode-- Sensor hub test= FAIL
golmert
New update with Bixby support and other enhancement. This watch has to be samsung longest device with software update. Going 4 years strong!
TMobile - Gear S3 Frontier - no update (yet)
Good afternoon hope this message finds you and your family well
I have a TMo GS3 F, I read about the update but non has shown on the Wear app
are you in the USA? or what network do you have ?
Thank you
SM-R760 and SM-R770 confirmed. :good:
No idea how soon the LTE variants will roll out...
Like SM-R765T and so on...
We know, LTE variants have to wait longer...
Best Regards
jmp1 said:
Good afternoon hope this message finds you and your family well
I have a TMo GS3 F, I read about the update but non has shown on the Wear app
are you in the USA? or what network do you have ?
Thank you
Click to expand...
Click to collapse
I'm on the wifi version of SM-R770 gear S3 classic USA
Using SM-760 Frontier in here Turkey but still nothing.
ΒΕΓΑ said:
Using SM-760 Frontier in here Turkey but still nothing.
Click to expand...
Click to collapse
Same here in the Netherlands.
Anyone has the OTA available for download?
@Whiskey103
Anyone has the OTA available for download?
Click to expand...
Click to collapse
You request the delta FOTA package?
I have downloaded only from ESF2 to FTD4...
Full Firmware not leaked yet to play with netOdin...
This is status from yesterday:
https://forum.xda-developers.com/showpost.php?p=82548443&postcount=45
Code:
KOO Korea
XAR USA
DBT Germany
I will try to inform if more CSC / Sales Codes online...
Best Regards
adfree said:
@Whiskey103
You request the delta FOTA package?
I have downloaded only from ESF2 to FTD4...
Full Firmware not leaked yet to play with netOdin...
This is status from yesterday:
https://forum.xda-developers.com/showpost.php?p=82548443&postcount=45
Code:
KOO Korea
XAR USA
DBT Germany
I will try to inform if more CSC / Sales Codes online...
Best Regards
Click to expand...
Click to collapse
Yea, was hoping for full firmware package to download and install with netOdin manually.
Ow well, maybe OTA pops up for me within few days.
@Whiskey103
Hello , how much has it been, 6 yrs? XD
nothin @ Spain btw
It broke my sensors ugh, going to have to use Odin to reflash till they work. Why can't they fix that?
D.O.C said:
@Whiskey103
Hello , how much has it been, 6 yrs? XD
nothin @ Spain btw
Click to expand...
Click to collapse
Ohh Hai there! Nice to see you Doc
It's been awhile yes haha, hope you're safe and healthy bud!
The FTD4 update is quite good - the watch feels more responsive, plus the bluetooth reconnect bug is gone for me (always had to reconnect mannually when the watch returned into the bluetooth range)
D.O.C said:
@Whiskey103
Hello , how much has it been, 6 yrs? XD
nothin @ Spain btw
Click to expand...
Click to collapse
Still nothing in Spain?
At least I didn't receive anything still for my frontier
Whiskey103 said:
Still nothing in Spain?
At least I didn't receive anything still for my frontier
Click to expand...
Click to collapse
nop. nothing via OTA
however, just changed my CSC to XAR and i got the FTD4 update inmediately....obviously I flashed it.
Now im just struggling to change it back XD, sbd command to launch the csc wont do anything anymore :/...
Samsung pays work fine so, I think Im just going to leave it at XAR for the time being
D.O.C said:
nop. nothing via OTA
however, just changed my CSC to XAR and i got the FTD4 update inmediately....obviously I flashed it.
Now im just struggling to change it back XD, sbd command to launch the csc wont do anything anymore :/...
Samsung pays work fine so, I think Im just going to leave it at XAR for the time being
Click to expand...
Click to collapse
Ohh cool, perhaps I go down that route as well then.
Any downsides that you came across using XAR country code?
Whiskey103 said:
Ohh cool, perhaps I go down that route as well then.
Any downsides that you came across using XAR country code?
Click to expand...
Click to collapse
Nothing so far, everything is working as expected , added my debit cards and activated them without issue.
changed CSC doing these steps
D.O.C said:
nop. nothing via OTA
however, just changed my CSC to XAR and i got the FTD4 update inmediately....obviously I flashed it.
Now im just struggling to change it back XD, sbd command to launch the csc wont do anything anymore :/...
Samsung pays work fine so, I think Im just going to leave it at XAR for the time being
Click to expand...
Click to collapse
does it work with tizen 4.0.0.4
naryhd said:
does it work with tizen 4.0.0.4
Click to expand...
Click to collapse
yeah 4.0.0.4 works, seems 4.0.0.7 is the one that does not allow CSC change using the sdb method
I received the update today in Michigan, USA.
Anyone with csc BTU (UK) received the latest 4.0.0.7 update?
Sent from my iPhone using Tapatalk