Database Info

[ROM] [BL] [CSC] Samsung Gear S3 Frontier SM-R760 ( R760XXU1APJF )

Click the link below for downloads.
Bootloader : Zippyshare
CSC : Zippyshare

What country is this csc for?
Swordfish

Australia .
I will upload the ROM in one-two days. Busy with work and mega.nz is having issues.

tids2k said:
Australia .
I will upload the ROM in one-two days. Busy with work and mega.nz is having issues.
Click to expand...
Click to collapse
OXA region - Australia? Are you sure?
After HARD RESET my watch show Russian language.
If CSC from Australia would be very good ...

I will check again and let you know. If its not I will try to dd the partition from my watch and attach it here.

Does this support gear pay?
tids2k said:
I will check again and let you know. If its not I will try to dd the partition from my watch and attach it here.
Click to expand...
Click to collapse
I have SM-R760 and i cannot use Gear Pay, would be great if this did support here in Sydney

For check CSC version input *#12580*369#

se47 said:
For check CSC version input *#12580*369#
Click to expand...
Click to collapse
Can someone in the US check and tell me what version you have? In Canada, we have OXA.

michaeldanielbourke said:
I have SM-R760 and i cannot use Gear Pay, would be great if this did support here in Sydney
Click to expand...
Click to collapse
Wrong forum area. This is for development. Check the Question and Answer area.

Sword Fish said:
Can someone in the US check and tell me what version you have? In Canada, we have OXA.
Click to expand...
Click to collapse
I'm from Norway, but bought my watch in Louisiana, USA in November.
I've got R760OXA1APK7. (USA)

Us csc:r7600xa1apk7

(sgp) ap: R760xxu1apk7
csc: R760oxa1apk7

Any luck getting the R770 (Gear S3 Classic) Firmware?

I will post both firmwares over the weekend.

Samsung pay is only compatible with AMEX and Citibank cards in Australia.

So can we do anything with these yet? Is it possible to flash from one region to another? I think I was misled into buying an international version since I can't get Samsung Pay working.

I'm not sure if the modem from AT &T would be any help. It might brick the watch.

tids2k said:
I will post both firmwares over the weekend.
Click to expand...
Click to collapse
Thanks! I See it's in progress!

SirBindy said:
So can we do anything with these yet? Is it possible to flash from one region to another? I think I was misled into buying an international version since I can't get Samsung Pay working.
Click to expand...
Click to collapse
Cross flashing is very risky. It can brick your watch. Im very excited to see somone has a look at the modem for the R-765A model. Not good with IDA or any other assembly. I hope some kind soul will look into adding su support and also disect the modem.bin for any hacks.
Also with the LTE service we need to use an extended eSim profile to be loaded onto the watch.
See here :

tids2k said:
Cross flashing is very risky. It can brick your watch. Im very excited to see somone has a look at the modem for the R-765A model. Not good with IDA or any other assembly. I hope some kind soul will look into adding su support and also disect the modem.bin for any hacks.
Also with the LTE service we need to use an extended eSim profile to be loaded onto the watch.
See here :
Click to expand...
Click to collapse
I ended up bricking my R770 by flashing the R765 firmware to it. It worked fine with the R760 firmware. I figure since the R765 has the LTE modem and such, it didn't like that one.

Tizen 3.0 Gear S3 Verizon but not connected to Verizon. How will I get Tizen 3.0?

I have the Gear S3 Verizon version but I am not currently connected to Verizon. Will I ever get the 3.0 Tizen update if I am not actually connected to Verizon? When Verizon finally pushes the update to the Gear S3, will it get pushed to mine even though I am not activated through Verizon yet and only use it currently through Bluetooth?

We will see...
But at the moment none of the SM-R765 "family" got Tizen 3 Update.
NO for:
Code:
SM-R765(S)
SM-R765A
SM-R765N
SM-R765F
SM-R765T
So you are not alone with SM-R765V.
At the moment you can only wait...
Best Regards
Edit 1.
Latest Verizon Version... at the moment...
Code:
R765VVRU1AQF4

adfree said:
We will see...
But at the moment none of the SM-R765 "family" got Tizen 3 Update.
NO for:
Code:
SM-R765(S)
SM-R765A
SM-R765N
SM-R765F
SM-R765T
So you are not alone with SM-R765V.
At the moment you can only wait...
Best Regards
Edit 1.
Latest Verizon Version... at the moment...
Code:
R765VVRU1AQF4
Click to expand...
Click to collapse
I know that, I know that no one with Verizon got the update yet. BUT, when Verizon does release the update will I get it to even if I am not running my Verizon Gear S3 through Verizon?

mjnoles1 said:
I know that, I know that no one with Verizon got the update yet. BUT, when Verizon does release the update will I get it to even if I am not running my Verizon Gear S3 through Verizon?
Click to expand...
Click to collapse
I think you SHOULD get it pushed thru the connection to a device and Sammy Gear App

I know that, I know that no one with Verizon got the update yet. BUT...
Click to expand...
Click to collapse
IMHO it is hard to look into future... without Crystal Ball.
IMHO easier... VZW Firmware is online... confirmed from other users...
THEN you try the normal way with Samsung Gear App and check for Firmware...
THEN you will see:
Work or not work.
And if not work... It is possible to find why it not update...
Chance to fix.
We know nothing about your configuration...
No idea which handset... Samsung or other Manufacturer...
We not know if Samsung will force to update to new Plugins or new Gear Manager Software or...
Maybe connection problems maybe...
I hope you understand now... why I answered so in my first post.
Best Regards

The answer to your question is yes. Your phone downloads the software, then pushes it to your device. There is no dependency on whether or not it has a mobile connection. That would be a huge oversight considering gear s3s that are wifi only dont have an issue getting updates.

I have the SM-R765A (LTE) from ATT and I have not received the update yet. What site are you referencing that shows no update yet for the 765 Family? Also, is it Samsung or ATT delaying the update? It wouldn't surprise me if it's ATT.
Thanks

Nukelaloosh said:
I have the SM-R765A (LTE) from ATT and I have not received the update yet. What site are you referencing that shows no update yet for the 765 Family? Also, is it Samsung or ATT delaying the update? It wouldn't surprise me if it's ATT.
Thanks
Click to expand...
Click to collapse
The only updates that have dropped are for the wifi models

SM-R765T T-Mobile
http://fota-cloud-dn.ospserver.net/firmware/TMB/SM-R765T/version.xml
SM-R765A ATT
http://fota-cloud-dn.ospserver.net/firmware/ATT/SM-R765A/version.xml
SM-R765F Singapore
http://fota-cloud-dn.ospserver.net/firmware/XSP/SM-R765F/version.xml
SM-R765V Verizon
http://fota-cloud-dn.ospserver.net/firmware/VZW/SM-R765V/version.xml
SM-R765(S) Korea
http://fota-cloud-dn.ospserver.net/firmware/SKC/SM-R765/version.xml
SM-R765N Newzealand... forgotten which CSC
If somebdoy receive new Tizen 3 update... Please inform us.
At the moment it looks for me...
Not in November...
Best Regards
Edit 1.
SM-R765N New Zealand:
SM-R765NDAATNZ
http://fota-cloud-dn.ospserver.net/firmware/TNZ/SM-R765N/version.xml
Seems N like never updated...

adfree said:
SM-R765T T-Mobile
http://fota-cloud-dn.ospserver.net/firmware/TMB/SM-R765T/version.xml
SM-R765A ATT
http://fota-cloud-dn.ospserver.net/firmware/ATT/SM-R765A/version.xml
SM-R765F Singapore
http://fota-cloud-dn.ospserver.net/firmware/XSP/SM-R765F/version.xml
SM-R765V Verizon
http://fota-cloud-dn.ospserver.net/firmware/VZW/SM-R765V/version.xml
SM-R765(S) Korea
http://fota-cloud-dn.ospserver.net/firmware/SKC/SM-R765/version.xml
SM-R765N Newzealand... forgotten which CSC
If somebdoy receive new Tizen 3 update... Please inform us.
At the moment it looks for me...
Not in November...
Best Regards
Click to expand...
Click to collapse
is this links to the actual firmware or what? trying to figure out what these links are for....

...or what?
Click to expand...
Click to collapse
This is 1 way to check FOTA Firmware from Samsung Server. Without buying these devices...
These are no Direct Links...
IMHO usefull if somebody ask about Firmware..
Maybe not usefull for you... but maybe for someone else.
Example...
ATT User ask about latest Firmware for SM-R765A...
Then I can check this Link:
http://fota-cloud-dn.ospserver.net/firmware/ATT/SM-R765A/version.xml
With open eyes I can see latest Version is at the moment:
Code:
R765AUCU2[B]BQD4[/B]/R765AATT2BQD4/R765AUCU2BQD4
So BQD4 is latest Firmware for ATT SM-R765... and it is NOT Tizen 3.
User can compare infos on device by checking About device infos... or by typing Code:
Code:
*#1234#
Same for Verizon SM-R765V...
Code:
R765VVRU1AQF4/R765VVZW1AQF4/R765VVRU1AQF4
Latest BUT not Tizen 3...
IMHO earliest Tizen 3 Firmware for SM-R765 family will start with CQK. or in December CQL.
So wait is all you can do...
Best Regards

adfree said:
This is 1 way to check FOTA Firmware from Samsung Server. Without buying these devices...
These are no Direct Links...
IMHO usefull if somebody ask about Firmware..
Maybe not usefull for you... but maybe for someone else.
Example...
ATT User ask about latest Firmware for SM-R765A...
Then I can check this Link:
http://fota-cloud-dn.ospserver.net/firmware/ATT/SM-R765A/version.xml
With open eyes I can see latest Version is at the moment:
Code:
R765AUCU2[B]BQD4[/B]/R765AATT2BQD4/R765AUCU2BQD4
So BQD4 is latest Firmware for ATT SM-R765... and it is NOT Tizen 3.
User can compare infos on device by checking About device infos... or by typing Code:
Code:
*#1234#
Same for Verizon SM-R765V...
Code:
R765VVRU1AQF4/R765VVZW1AQF4/R765VVRU1AQF4
Latest BUT not Tizen 3...
IMHO earliest Tizen 3 Firmware for SM-R765 family will start with CQK. or in December CQL.
So wait is all you can do...
Best Regards
Click to expand...
Click to collapse
That's strange, AT&T's software page for the S3 shows R765AUCU2BQB3 as the latest software...
https://www.att.com/devicehowto/tut...tep_KM1209727?make=Samsung&model=SamsungR765A

any one received the tizen 3.0 update on SM-R765A yet ?

any one received the tizen 3.0 update on SM-R765A yet ?
Click to expand...
Click to collapse
Only Samsung R&D ...
Normal customer/end user still on old Firmware Version:
http://fota-cloud-dn.ospserver.net/firmware/ATT/SM-R765A/version.xml
Same status for all SM-R765:
https://forum.xda-developers.com/showpost.php?p=74649283&postcount=9
None of them got Tizen 3 update...
NO idea if they manage it before Xmas... or you have to wait 2018...
Best Regards

I'd ask why you want 3.0... Then I'd Google: gear s3 tizen 3.0 battery issues.
Some are saying hard reset fixes, but others state it hasn't.
I'm not personally aware of the 3.0 benefits as I've not researched yet, but odds are I'll wait to let it update until I see it sorted.
I can't think of any feature that would be worth giving up three days battery for inside 24 hours...

sliiight said:
I'd ask why you want 3.0... Then I'd Google: gear s3 tizen 3.0 battery issues.
Some are saying hard reset fixes, but others state it hasn't.
I'm not personally aware of the 3.0 benefits as I've not researched yet, but odds are I'll wait to let it update until I see it sorted.
I can't think of any feature that would be worth giving up three days battery for inside 24 hours...
Click to expand...
Click to collapse
Samsung has released a new update to address the problem

I Have the latest (?) version Tizen 3.0.0.1 (BT version watch).
R760XXU2CQK3
When checking for update (tried more than ones and more than one day), I get notification:
"Unable to update the software. A network or server error occured. Try again later".
Watch is connected to network. Tried also another network. But same result.
Checking if watch makes a good network connenction: I can install watchfaces etc. So this is not the problem.
Anybody any idea? Someting wrong with de Samsung server?
(from Holland)

No idea why...
But seems ATT Tizen 3 Firmware online...
Code:
R765AUCU2CQL1/R765AATT2CQL1/R765AUCU2CQL1
Can somebody confirm?
Best Regards

Only as info.
For SM-R775T TMB also Odin package available:
Code:
AP_R775TUVU1BQL1_usr.tar.md5
BL_R775TUVU1BQL1_usr.tar.md5
CP_R775TUVU1BQL1_CL671756_QB8299983_SIGNED.tar.md5
CSC_TMB_R775TTMB1BQL1_usr.tar.md5
Best Regards

On TMobile. No active mobile line to tmobile gear S3, downloading update fine via WiFi.

Geasr S3 Frontier --still on 2.3.5

Hi,
How can check CSC of my gear s3 frontier. I m stuck on 2.3.2.3 and it always say u have the latest version already installed. Can someone help? i got as a gift and no idea where this belongs to as it was purchased from another owner.
SM R760
Current build : R760XXU2BQC5
Thanks

My CSC is OXA, as i found by dialing *#1234# on watch. Can someone confirm is OXA was updated or not?

How to identify product code??? i have box etc but needs help.

You are able to work with ADB?
If yes, then SDB is "same"...
No need of any "Box"... as SDB works also over WiFi...
Btw...
Only few CSC at the moment have Tizen 3 updates...
MOST other CSC still on BQC5 or BQH1...
Code:
KOO for Korea
XAR for USA
These are confirmed CSC at the moment...
So you are not alone.
Best Regards

Thanks a million. Can you help me with SDB? where to get and use.. any code to check country? it says country of origin VEITNAM, and on box some other language is printed which is not english atleast

This is the box. Can you help

My fault...
I thought with Box you mean "Professional Tools"... like RIFF Box or Z3X Box...
I see russian... so it could be SER... as Sales Code...
http://fota-cloud-dn.ospserver.net/firmware/SER/SM-R760/version.xml
http://fota-cloud-dn.ospserver.net/firmware/SER/SM-R770/version.xml
SM-R760 and SM-R770 for SER still on BQC5... this is CORRECT...
To check if my idea is correct...
SDB + Instruction is here:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
Commands are here:
In old Tizen 2.3
Code:
vconftool get -t string db/csc/salescode
In CQK3 Tizen 3 Firmware this work:
Code:
cat /csa/csc/csc-active-customer.inf
Code:
cat /csa/imei/prodcode.dat
Simple Copy & Paste...
Best Regards

Will try sbd today and share feedback. Anyone knows when will users others than usa nd kor will get tizen 3. Any other simply way to update?? As i have heard that battery fix is also available

Hi,
I'm in the same situation like you. My Gear S3 Classic R770 (OXA) still running 2.3.2.3.
How can i force update it to Tizen 3?

We should not perform force update as CQK3 has been removed and it was hell buggy. Wait for the fixed OTA. Fingers crossed.

As per sammobile....updated tozen 3.0 has started rolling today again...for other regions in batches

adfree said:
My fault...
I thought with Box you mean "Professional Tools"... like RIFF Box or Z3X Box...
I see russian... so it could be SER... as Sales Code...
http://fota-cloud-dn.ospserver.net/firmware/SER/SM-R760/version.xml
http://fota-cloud-dn.ospserver.net/firmware/SER/SM-R770/version.xml
SM-R760 and SM-R770 for SER still on BQC5... this is CORRECT...
To check if my idea is correct...
SDB + Instruction is here:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
Commands are here:
In old Tizen 2.3
In CQK3 Tizen 3 Firmware this work:
Simple Copy & Paste...
Best Regards
Click to expand...
Click to collapse
Worked....my product code is CAC. UZEBEKISTAN STRANGE.... NEVER THOUGH I GOT A WATCH WITH THIS PRODUCT CODE.hehehehe

Sammobile says. Samsung is rolling out a new recised update but I have got nothing. Looka like Samsung is nout pushing tizen anymore

CAC is still on BQC5:
http://fota-cloud-dn.ospserver.net/firmware/CAC/SM-R760/version.xml
Nobody knows Samsung plans... nor can understand them...
Best Regards

https://www.sammobile.com/news/revised-tizen-3-0-update-for-gear-s3-rolling-out-now
This link gave a lot of hop yesterday but then no one yet confirmed the new update recently..disappointed..

Nothing new...
Same situation like few dayS before:
https://forum.xda-developers.com/showpost.php?p=74912522&postcount=232
Code:
KOO for Korea
XAC for Canada
XAR for US
These are the only 3 from over 80 CSC...
Others still on BQC5 or BQH1...
Best Regards

Same here. Sales Code for my Gear S3 Frontier (bought in Pakistan) is CAC. Nothing yet. Keeping fingers crossed.
adfree said:
CAC is still on BQC5:
http://fota-cloud-dn.ospserver.net/firmware/CAC/SM-R760/version.xml
Nobody knows Samsung plans... nor can understand them...
Best Regards
Click to expand...
Click to collapse

Actually samaing is trying to ensure a totally bug free update loosers really

Salman787 said:
Same here. Sales Code for my Gear S3 Frontier (bought in Pakistan) is CAC. Nothing yet. Keeping fingers crossed.
Click to expand...
Click to collapse
CAC is uzbek...so strange it should have been PAK

I bought it from Lahore Hafiz Center. Checked my sales code only when my watch failed to get the new update.
papubhai said:
CAC is uzbek...so strange it should have been PAK
Click to expand...
Click to collapse
---------- Post added at 09:42 AM ---------- Previous post was at 08:44 AM ----------
Hey Guys,
Check your updates. Just received mine. Specially the people with CAC Sales Code.

new SM- 765F issues - please help!!!

Hi all
Got a new Froniter s3 ( LTE) from Singapore. Hardly used it and after two days of use experience severe issues:
1. watch gets overheated when charging in cradle and watch is on. It can charge only when its off.
2. Sensors fail to work. I intended to use this mainly for sports and HR monitor is not functioning at all ( it uses to work for the first two days).
Other than that watch seems to work ok.
Here are the SW details:
Model: SM-R765FDAAXSP
Tizen- 3.0.0.2
SW version: R765FXXU2CRD2
Knox version: 2.2.0
SE 1.0.0
TIMA 3.0.0
I am out of Singapore and it seems too difficult communicating with Samsung support in Singapore ( there is no international warranty). Whats going on anyone can suggest?? I am so frustrated. I did factory reset more than once and also uninstalled all the Samsung apps from the phone. Nothing helps. I have not yet activated any LTE esim profile. Used the watch only as bluetooth
Can this happen due to a SW version? can I downgrade it? if yes, where can I get the version for the Spore version firmware?
thank you
Giora

CRD2 seems latest at the moment.
I have also Combination Firmware...
Code:
COMBINATION-FT30_R765FXXU2CRB1.tar.md5
And this Version for downgrade attempt:
Code:
R765FXXU2CRA1
CRD2 I have also...
PM me.
Best Regards

Can you read this post:
https://forum.xda-developers.com/showpost.php?p=77321708&postcount=1
And post result what you see after:
Code:
*#0*#
Best Regards

adfree said:
Can you read this post:
https://forum.xda-developers.com/showpost.php?p=77321708&postcount=1
And post result what you see after:
Code:
*#0*#
Best Regards
Click to expand...
Click to collapse
Hi
I have done the sensor hub test and here is what I see:
mcu firm br010
bin firm version bro118031200
bcm4774iub2g
FAIL
also when phone is on and charging it gets overheated with flashing exclamation mark. It can only get charged when off
I have not yet done any firmware change. Not wanting to void anything unless I know what to do..
Thank you for the help!!

Here is the Combination Firmware...
This is Factory/Service stuff...
https://www.file-upload.net/download-13298563/COMBINATION-FT30_R765FXXU2CRB1.tar.zip.html
netOdin +Infos + Videos are here:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
I will later upload the 2 Stock Firmware I have...
Best Regards

Thank you so much!
So I have downloaded the combination file. Does this include all types and I have to choose the one that suits my firmware?
I have unzipped it by could not see whats inside, only one MD5 file.
Thank you
Golmert

Code:
COMBINATION-FT30_R765FXXU2CRB1.tar.md5
Correct.
1 file
You see R765F inside Filename.
This means SM-R765F.
Choose this as AP in netOdin...
Later I will upload the other 2 Stock Firmware...
I suggest you first to test with Combination Firmware...
This is standalone Firmware... so no Phone connection required.
Maybe helpfull to check sensors...
Own risk!
Best Regards

https://www.file-upload.net/download-13299892/R765FXXU2CRA1_OLB.7z.html
CRA1 for downgrade attempt...
Best Regards

adfree said:
https://www.file-upload.net/download-13299892/R765FXXU2CRA1_OLB.7z.html
CRA1 for downgrade attempt...
Best Regards
Click to expand...
Click to collapse
Thank you very much! so if I try the combination which is supposed to be standalone with no phone, will I be able to connect it to a phone if it is working ok?

Please look at these Screenshots/Pics:
https://forum.xda-developers.com/showpost.php?p=74591475&postcount=13
Combination Firmware is Service/Factory Software... for """Repair"""...
I have no Crystal Ball if sensors will work again...
You can try... or wait for Samsung...
Your choice.
Your rown risk.
Best Regards

adfree said:
https://www.file-upload.net/download-13299892/R765FXXU2CRA1_OLB.7z.html
CRA1 for downgrade attempt...
Best Regards
Click to expand...
Click to collapse
Thank you very much!!!! will let you know how that goes...
golmert

Any kind of progress?
Best Regards

adfree thank you very much for the followup. I have still not done this , waiting for weekend...
You said that you also have the CRD2 right ?
BTW, just to make sure- these stock ROMS are carrier unlocked Right?
Thanks
Golmert
Thaks
golmert

You said that you also have the CRD2 right ?
Click to expand...
Click to collapse
Yes correct.
Code:
AP_R765FXXU2CRD2_usr.tar.md5
BL_R765FXXU2CRD2_usr.tar.md5
CP_R765FXXU2CRD2_CL806632_QB9592827_SIGNED.tar.md5
CSC_OLB_R765FOLB2CRD2_usr.tar.md5
I have uploaded 2 of 3 promised files/Firmware packages...
I will wait for next upload, after weekend... after your result...
From CRA1 FOTA should work to update back to CRD2... over the air.
BTW, just to make sure- these stock ROMS are carrier unlocked Right?
Click to expand...
Click to collapse
No idea what you mean with carrier unlocked...
Firmware(s) is for SM-R765F Singapore (XSP).
Samsung have only carrier locked Gear S3 devices... because this is eSim crap
This is why they did the funny thing with:
Code:
SM-R765A ATT for ATT only
SM-R765T TMB for T-Mobile only
SM-R765 Korea
SM-R765N New Zealand
SM-R765V Verizon...
You can only use your SM-R765F in Singapore for LTE...
There is no other valid Firmware for SM-R765F...
Best Regards

OK. But I thought that an esim profile can be downloaded with any carrier that supports it and then the watch can be used regardless of carrier, assuming of course that LTE band fits the country frequencies. So if I have this phone which is supporting my country LTE version, which is exactly like in Singapore, can't I activate a new esim profile? The watch I have is with no esim profile at the moment and allows me to download one.

This is rumour... better ""Running Gag""... IMHO.
I saw nobody have success...
Examples:
https://forum.xda-developers.com/gear-s3/how-to/discuss-how-to-creat-qr-code-to-t3758970
https://forum.xda-developers.com/gear-s3/help/singaporessm-r765flikes-download-t3748828
https://forum.xda-developers.com/gear-s3/help/frontier-lte-att-switching-providers-t3501589
.
.
.
Reason why I have these Firmwares for SM-R765F...
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
I am from Germany...
I never hold LTE Gear in my hand...
Next chance is... SM-R8xx series... (Galaxy Watch)
But seems to locked to T-Mobile and Vodafone...
But this thime I am not willing to spend money for Samsung...
Tizen 4 is also full of Bxgs and Quality Apps not increased... because all locked down in Tizen Eco System...
Best Regards

hi thank you for the details adfree. I am not sure what I do with several files for one firmware , but will need to check with you about this after I check the combination firmware.. Will keep you posted.
golmert

Hi I have a question about the combination and Netodine- what do I have to choose - which one do I have to check? BL,AP, CpP, CSC?
Thanks
Golmert

If Combination Firmware = SINGLE file = 1 file
Code:
COMBINATION-FT30_R765FXXU2CRB1.tar.md5
You can use AP... to select this 1 file.
In theory Odin accept also drag & drop... via Explorer...
Not tested yet with netOdin...
If 4 files...
Code:
[B]AP[/B]_R765FXXU2CRD2_usr.tar.md5
AP
Code:
[B]BL[/B]_R765FXXU2CRD2_usr.tar.md5
BL
Code:
CP_R765FXXU2CRD2_CL806632_QB9592827_SIGNED.tar.md5
CP
Code:
[B]CSC[/B]_OLB_R765FOLB2CRD2_usr.tar.md5
CSC
Important hint.
Please not change any settings in netOdin!
Use Standard Settings.
Best Regards

here is an update after combination firmware- the upload passed succesfuly.
When watch rebooted it shows once in a while Error - lhd stopped unexpectedly. When pressing OK it goes away and then comes back.
When going to test mode-- Sensor hub test= FAIL
golmert

Question S22 Ultra csc change

Hi. I bought my S22 Ultra in Poland, I live in UK. Samsung pay refuse to work as the phone is from Poland.
It is on OXM firmware with EUX CSC.
I want to set the region csc for UK.
I read that Samkey does not support CSC change for S22 Ultra with June patch.
Any other way to do it?

Maybe this
Samsung Pay in german, CSC is EUX fix, 5 minutes
Hello This also works with most Samsung phones If anyone is struggling with Samsung pay being in German and has the csc being EUX, I know how to solve the issue and it only takes about 5 minutes. Basically the csc is set to EUX, which is the new European standard, but for some reason, Samsung...
eu.community.samsung.com

It worked!!! Thanks. That method should be pinned.

WOW THANKS, IT WORKED LIKE A CHARM!
<3 <3 <3
raul6 said:
Maybe this
Samsung Pay in german, CSC is EUX fix, 5 minutes
Hello This also works with most Samsung phones If anyone is struggling with Samsung pay being in German and has the csc being EUX, I know how to solve the issue and it only takes about 5 minutes. Basically the csc is set to EUX, which is the new European standard, but for some reason, Samsung...
eu.community.samsung.com
Click to expand...
Click to collapse

i tried but there is no option in activities
click on activities and scroll down too configuration update com.samsung.android.app.omcagent.test.ui.QATestActivity and open
no scroll down option

Pichulec said:
Hi. I bought my S22 Ultra in Poland, I live in UK. Samsung pay refuse to work as the phone is from Poland.
It is on OXM firmware with EUX CSC.
I want to set the region csc for UK.
I read that Samkey does not support CSC change for S22 Ultra with June patch.
Any other way to do it?
Click to expand...
Click to collapse
Samkey have support, i change csc yesterday, and it work

PeterParker said:
Samkey have support, i change csc yesterday, and it work
Click to expand...
Click to collapse
No point paying for something i can have for free. Also, i dont have any problems with OTA like some people after using SAMKEY

PeterParker said:
Samkey have support, i change csc yesterday, and it work
Click to expand...
Click to collapse
i tried but couldn't change it , how did you do it ?

SamFw Tool 4.7.1 - Remove Samsung FRP one click
Hi Today, we introducing SamFw FRP Tool version 4.7.1 Main function: Remove FRP with one click Change CSC with one click Remove FRP for new se...
samfw.com
Change CSC for free!

I want to change my CSC of S 22 Ultra, i bought from Australia SM-S908EDRFATS to India SM-S908EZKP, i see both are S908E models.
Please guide me thanks in advance

You have all info here:
SD Native call recording & CSC (without rooting)
Hi everyone, Looking for some insight and more educated projections. I'm in Canada, and our phones (SD) typically didn't get native call recording (or any recording allowed as a matter of fact after Pie was rolled out). I had to purchase a...
forum.xda-developers.com

Pichulec said:
No point paying fors something i can have for free. Also, i dont have any problems with OTA like some people after using SAMKEY
Click to expand...
Click to collapse
do you seriously still receive OTA's with changed CSC? that cant be possible..

Neeko72 said:
do you seriously still receive OTA's with changed CSC? that cant be possible..
Click to expand...
Click to collapse
Well. It is possible as I am receiving ota updates. Unfortunately this method no longer works as knox key has been revoked for the Aliance Shield..

amitdon said:
I want to change my CSC of S 22 Ultra, i bought from Australia SM-S908EDRFATS to India SM-S908EZKP, i see both are S908E models.
Please guide me thanks in advance
Click to expand...
Click to collapse
Totally works with suggested samfirm tool 3.31 I'm Australian an changed from XSA to INS I now have call recording faster OTA firmware updates and nothing not working it's a very simple process using that software and costs nothing.

Neeko72 said:
do you seriously still receive OTA's with changed CSC? that cant be possible..
Click to expand...
Click to collapse
Yes I got India update yesterday and my phone is Australian model who always got late updates OTA works perfectly with samfirm tool after csc change I'll prove it Check the photos

Pichulec said:
Well. It is possible as I am receiving ota updates. Unfortunately this method no longer works as knox key has been revoked for the Aliance Shield..
Click to expand...
Click to collapse
There is a fix for that but you have to downgrade to android 12 first them install alliance using their instructions on their discord then you can update to latest firmware and it still works

Hi all. I change my CSC with the help of this video very easy
Change csc