Related
Hope this isn't a redundant question, but I've looked in a lot of places and can't find any information...
When I get into bootloader and fastboot oem get_unlock_data it just sits and says <waiting for device >. Does the US Cellular ROM do the same as the Verizon XT1254 in keeping the bootloader locked?
My personal phone is a Nexus 6 and I've been doing this for years, but just got this one for my mother.
THANKS :fingers-crossed:
Did you check "allow usb debugging" after unlocking developer options? I had to do this before it would recognise it in bootloader on my PC. Easiest way to check is to enter "fastboot devices" to verify that it's actually reading your phone as connected
---------- Post added at 07:54 PM ---------- Previous post was at 07:48 PM ----------
Rhuagh3 said:
Did you check "allow usb debugging" after unlocking developer options? I had to do this before it would recognise it in bootloader on my PC. Easiest way to check is to enter "fastboot devices" to verify that it's actually reading your phone as connected
Click to expand...
Click to collapse
Sorry if this is obvious haha. You never know!
KeepingItCuttingEdge said:
Hope this isn't a redundant question, but I've looked in a lot of places and can't find any information...
When I get into bootloader and fastboot oem get_unlock_data it just sits and says <waiting for device >. Does the US Cellular ROM do the same as the Verizon XT1254 in keeping the bootloader locked?
My personal phone is a Nexus 6 and I've been doing this for years, but just got this one for my mother.
THANKS :fingers-crossed:
Click to expand...
Click to collapse
Did you make sure you have the correct drivers downloaded
OOPS
Yes, I had Android Debugging enabled and the adb command worked fine and I was able to adb reboot bootloader.
When I checked in fastboot devices it wasn't showing up, so EUREKA it worked when I installed the 2.5.4 version of Motorola Device Manger.
I thought since it worked fine on my Nexus 6, which is a Motorola phone, that it would work on the Moto Max -- but NO.
THANKS for the quick reply and restating the obvious was QUITE helpful! Haha
UNLOCKED -- TWRP and Marshmallow here I come!
Hi guys, I am facing a lot of issues after the marshmallow update on moto G3, locked and unrooted. The thing that triggered this was one day when my internal memory got full, it rebooted. And since then i have faced unbelievable number of issues. No notifications, quick access not working, home n recent buttons not working, incoming call getting rejected and lots of other issues. When i try to enable developer settings and tap build number multiple number of times, nothing happens. No matter how much i try, i am not able to enable developer settings. USB debugging is not working of course and computer won’t recognise the phone, not even in mtp mode. Since quicksettings/notification pulldown is not working, there is no way to change it to MTP mode.
Further, when i go to backup and reset in settings, i see that that the reset option is grayed out. When i try to go to recovery to hard reset, it won’t go to the recovery, just stays on that stupid ‘no input’ screen despite pressing power and volume up key together. I am out of options and since the usb debugging is not working i dunno what more i can do to salvage the phone! Please help me if you can…
It is got frf locked. You have to frf unlock it.
There is a fast boot command for erase data.. will search for it now
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
fastboot erase cache
fastboot erase userdata
fastboot erase customize
---------- Post added at 07:38 PM ---------- Previous post was at 07:38 PM ----------
This will erase all your data including photos etc
But I dont think u need usb debug if u want to connect to some kind of pc program for moto?I may be wrong (i have a Sony)
Sent from my D6603 using Tapatalk
Arcade said:
It is got frf locked. You have to frf unlock it.
Click to expand...
Click to collapse
Thanks for giving a name for my strange problem lol! But i don't know anything about frf lock n unlock. Could u plz give me a brief idea as to how to get it unlocked?
HelpMeruth said:
There is a fast boot command for erase data.. will search for it now
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
fastboot erase cache
fastboot erase userdata
fastboot erase customize
---------- Post added at 07:38 PM ---------- Previous post was at 07:38 PM ----------
This will erase all your data including photos etc
Click to expand...
Click to collapse
Thanks for searching the commands, but sadly it won't work since the debugging is not on. As i mentioned in the OP, adb is not able to see the device. I could just flash the os again if fastboot commands were working! I am still this problem coz fastboot is useless as i am not able to turn on debugging.
Xperia U Lover said:
But I dont think u need usb debug if u want to connect to some kind of pc program for moto?I may be wrong (i have a Sony)
Sent from my D6603 using Tapatalk
Click to expand...
Click to collapse
Motorola does not have a pc program.
zazzy24 said:
Thanks for giving a name for my strange problem lol! But i don't know anything about frf lock n unlock. Could u plz give me a brief idea as to how to get it unlocked?
Thanks for searching the commands, but sadly it won't work since the debugging is not on. As i mentioned in the OP, adb is not able to see the device. I could just flash the os again if fastboot commands were working! I am still this problem coz fastboot is useless as i am not able to turn on debugging.
Motorola does have a pc program.
Click to expand...
Click to collapse
I'm pretty sure he means FRP locked for Factory Reset Protection but I doubt your problem is that.
Sent from my SM-T530NU using XDA-Developers mobile app
Debugging doesn't need to set to on.. go to the bootloader and use my commands that I gave you
HelpMeruth said:
Debugging doesn't need to set to on.. go to the bootloader and use my commands that I gave you
Click to expand...
Click to collapse
Ok let me give u a liitle background to make u understand the exact situation. When the issue began about 3 weeks back, the 1st thing i thought of doing was to connect it to my computer and reflash the firmware from lost101's thread. However, i realised that adb was not able to see my device. All the commands that u mentioned are not working....
Sorry thought you were saying only adb didn't work
---------- Post added at 05:06 AM ---------- Previous post was at 05:06 AM ----------
Which errors showed up
Sorry to reply so late but i had to get a new phone as that one became unusable.. Thanks a lot for your help n support though!
Sent from my Moto G (4) using Tapatalk
How to unlock Vodafone vfd300 any network any carrier?
Follow the instructions.
Download:
https://mega.nz/#F!MpM2QRYT!j8GtDwqyhU7TsunOZxadmg
Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6580_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only"
- Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
-Start recovery and wipe data and cache.
-Reboot system
- Finish !
-ENJOY!!!
Hi there Mercyless,
I tried your instructions step by step but I'm getting this error message when I load the scatter file:
Partition[frp] shoult NOT set "is_download" to true in scatter file
Please check
What can I do? Thanks.
Bogdanux said:
Hi there Mercyless,
I tried your instructions step by step but I'm getting this error message when I load the scatter file:
Partition[frp] shoult NOT set "is_download" to true in scatter file
Please check
What can I do? Thanks.
Click to expand...
Click to collapse
No problem my friend!
Just use this sp flashtool:
https://mega.nz/#F!0pU01Y4C!shO88mJ-svGJ8tni_5DmLA
:good:
Hi again,
I tried your version but I get the following error:
BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2005)
Tried the general fixes of this error but no help. Also, I used the latest SP Flash Tool from the official website and another ROM and it worked (only without battery).
I'll try on a different computer with your downloads to see if I get the same result.
Bogdanux said:
Hi again,
I tried your version but I get the following error:
BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2005)
Tried the general fixes of this error but no help. Also, I used the latest SP Flash Tool from the official website and another ROM and it worked (only without battery).
I'll try on a different computer with your downloads to see if I get the same result.
Click to expand...
Click to collapse
This means that the device will try to turn it on, not start flash mode.
First, charge the battery.
Do not use the latest flashtoolt, use what i've shown, the older version!!
Reinstall the drivers, use another cable.
The firmware is working, I've used it many times! :good:
Feedback please...
Hi there,
I want to root also, can anyone give a feedback on theses procedures. Are they working?
Thanks
Scam
File won't even download, gets to 51% then stops, tried 3 times now
I'm trying to download the file. After using i will give feedback.
NoName4me82 said:
File won't even download, gets to 51% then stops, tried 3 times now
Click to expand...
Click to collapse
SCAM???
Do not talk stupid things!!
If you can not download a simple file, do not come here!
Downloading works, files are good!
Do not lie to others, ugly thing!
Usb debugging????
I flashed my vfd300 with the stock rom using spflash but i made a rookie mistake by not turning debugging on resulting in phone stuck at spinning circle, will this flash withouy debugging, or do you know any way i can enable it using adb or fastboot??
cheers
jonny5alen said:
I flashed my vfd300 with the stock rom using spflash but i made a rookie mistake by not turning debugging on resulting in phone stuck at spinning circle, will this flash withouy debugging, or do you know any way i can enable it using adb or fastboot??
cheers
Click to expand...
Click to collapse
The first departure is 15-20 minutes, just wait.
Waited much longer,
Mercyless said:
The first departure is 15-20 minutes, just wait.
Click to expand...
Click to collapse
I left it all night and it never got past the circle, ive just managed to flash again using a difarent rom so ill see if this one works,
im stiull waiting for your one to download, when its finidhed will it flash with out usb debugging enabled ?
Hello,my device is already rooted but it is network locked. If i flash this scatter file,will i lose root after flashing?
Trace.Oneil said:
Hello,my device is already rooted but it is network locked. If i flash this scatter file,will i lose root after flashing?
Click to expand...
Click to collapse
Hi Friend! Root will not be available.
jonny5alen said:
I left it all night and it never got past the circle, ive just managed to flash again using a difarent rom so ill see if this one works,
im stiull waiting for your one to download, when its finidhed will it flash with out usb debugging enabled ?
Click to expand...
Click to collapse
I'm Hungarian, I do not understand the question.
Please write more clearly.
Mercyless said:
Hi Friend! Root will not be available.
Click to expand...
Click to collapse
So if i flash this i will lose root?
Flashed it?
Hi merciless,
I finally managed to flash our rom just now but its still just stopping at a spinning circle, Any Ideas mate
---------- Post added at 04:20 PM ---------- Previous post was at 04:17 PM ----------
Mercyless said:
I'm Hungarian, I do not understand the question.
Please write more clearly.
Click to expand...
Click to collapse
Sorry,
what i meant was that i managed to flash a stock rom but it never actually booted up, it just gets to a spinning disc
but originally i never enabled usb debugging so i fear that is where the issue is do you know of anyway to enable usb-debugging via adb\fastboot?
jonny5alen said:
Hi merciless,
I finally managed to flash our rom just now but its still just stopping at a spinning circle, Any Ideas mate
---------- Post added at 04:20 PM ---------- Previous post was at 04:17 PM ----------
Sorry,
what i meant was that i managed to flash a stock rom but it never actually booted up, it just gets to a spinning disc
but originally i never enabled usb debugging so i fear that is where the issue is do you know of anyway to enable usb-debugging via adb\fastboot?
Click to expand...
Click to collapse
Unfortunately I do not know how to work this way with adb / fastboot.
I did not have to use it yet.
If you do not start the system to do a hard reset, it will surely be good afterwards.
After the hard reset, the first start is 15-20 minutes, just wait patiently.
I will also make a video about the installation, I hope it will help.
Trace.Oneil said:
So if i flash this i will lose root?
Click to expand...
Click to collapse
Yes, she needs to re-root.
vfd 300
I found another ROM - [MT6580_S00_EMMC_MRA58K__6.0_VFD 300_Vodafone_356774071726533_08_19_2016_09_02_53
and after flashing it with this one, everything appeared fine. The language was Vietnamese or somemthing and the region from Australia & East Asia, but still I managed to change it, root the phone and setup my stuff... with only one big problem, when I insert my SIM card, it asks for a network lock [NP] and says I have 99 attempts left.
---------- Post added at 07:32 AM ---------- Previous post was at 07:23 AM ----------
i have tried but my phone keep disconecting after 2 second and procces fails, but when am using this ROM --MT6580_S00_EMMC_MRA58K__6.0_VFD 300_Vodafone_356774071726533_08_19_2016_09_02_53 it is flashing well but sim is locked .......i have tried bettery trick the phone dont disconect but nothing is happening.
HELP ME PLEASE!!!!!!!!!
So after I installed the Official Android 10 GSI just out of curiousity, it worked and the only reason I didn't stay with it was because it didnt have the new gestures and no lockscreen options. Everything else worked amazingly.
At this point I just wanted to install LineageOS and root but the phone kept rebooting to TWRP over and over no matter what I'd flash and no matter how many times I wiped it kept rebooting until it eventually got no response at all.
I tried everything restoring back up nothing, when I tried just flashing the zip file the recovery screen just kept flashing then rebooted back. I cannot save this for life of me I am left with a paperweight.
Ive tried the classic Moto G force restart trick but no luck in anything. No matter what I tried now it wont respond to any button presses. Am I just screwed? I'm waiting 24 hours before trying again while plugged in. What am i to do?
Metro By T-Mobile Variant if that helps at all
uHeash said:
So after I installed the Official Android 10 GSI just out of curiousity, it worked and the only reason I didn't stay with it was because it didnt have the new gestures and no lockscreen options. Everything else worked amazingly.
At this point I just wanted to install LineageOS and root but the phone kept rebooting to TWRP over and over no matter what I'd flash and no matter how many times I wiped it kept rebooting until it eventually got no response at all.
I tried everything restoring back up nothing, when I tried just flashing the zip file the recovery screen just kept flashing then rebooted back. I cannot save this for life of me I am left with a paperweight.
Ive tried the classic Moto G force restart trick but no luck in anything. No matter what I tried now it wont respond to any button presses. Am I just screwed? I'm waiting 24 hours before trying again while plugged in. What am i to do?
Metro By T-Mobile Variant if that helps at all
Click to expand...
Click to collapse
Connect to a PC
In Device Manage
If phone is shown as
QHSUSB_Bulk or qloader
It's in emergency download mode
You will need a Blankflash file or a mmcblk0.img
sd_shadow said:
Connect to a PC
In Device Manage
If phone is shown as
QHSUSB_Bulk or qloader
It's in emergency download mode
You will need a Blankflash file or a mmcblk0.img
Click to expand...
Click to collapse
Hi my phone stay in bootloader but dont work, fbank flash say waiting for devices, and qhusb or qloader dont appear in my pc, help me
iFelipe97 said:
Hi my phone stay in bootloader but dont work, fbank flash say waiting for devices, and qhusb or qloader dont appear in my pc, help me
Click to expand...
Click to collapse
You cannot use a blankflash if device is in fastboot mode
Sent from my ali using XDA Labs
---------- Post added at 04:37 AM ---------- Previous post was at 04:35 AM ----------
run
Code:
fastboot getvar all
Please post it here after you remove the IMEI line
See
Motorola Flashing Guide
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
If you don't know fastboot commands
Sent from my ali using XDA Labs
sd_shadow said:
You cannot use a blankflash if device is in fastboot mode
Sent from my ali using XDA Labs
---------- Post added at 04:37 AM ---------- Previous post was at 04:35 AM ----------
run
Code:
fastboot getvar all
Please post it here after you remove the IMEI line
See
Motorola Flashing Guide
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
If you don't know fastboot commands
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Please help me flash stock firmware not work for me error remote failured
Hi guys,
I have this phone (european dual sim version) and tried to update it via Newflasher. Now the phone doesnt start anymore, it is stuck in bootloop, just says sony and then it says that my phone is corrupt and it will not boot. I dont have enough battery to repair it via Companion. Is there any way to avoid going to the Sony Service?
I should mention that I tried to flash firmware 58.0.A.22.21 Europe Customized EEA. What should I flash to get it to start? Any idea is welcome.
Thank you.
leoking3 said:
Hi guys,
I have this phone (european dual sim version) and tried to update it via Newflasher. Now the phone doesnt start anymore, it is stuck in bootloop, just says sony and then it says that my phone is corrupt and it will not boot. I dont have enough battery to repair it via Companion. Is there any way to avoid going to the Sony Service?
I should mention that I tried to flash firmware 58.0.A.22.21 Europe Customized EEA. What should I flash to get it to start? Any idea is welcome.
Thank you.
Click to expand...
Click to collapse
Can you post a log of what newflasher says when you try to flash the EU rom?
TripodKnight said:
Can you post a log of what newflasher says when you try to flash the EU rom?
Click to expand...
Click to collapse
It flashes, finishes, phone is disconnected, then it doesnt start anymore. Please let me know what log are you talking about and how to get it?
leoking3 said:
It flashes, finishes, phone is disconnected, then it doesnt start anymore. Please let me know what log are you talking about and how to get it?
Click to expand...
Click to collapse
Copy all of the newflasher text into a notepad file and post it here so we can review it.
TripodKnight said:
Copy all of the newflasher text into a notepad file and post it here so we can review it.
Click to expand...
Click to collapse
Oh, ok , sure, in 10 minutes.
leoking3 said:
Oh, ok , sure, in 10 minutes.
Click to expand...
Click to collapse
Please see it attached
leoking3 said:
Please see it attached
Click to expand...
Click to collapse
Do you have ADB installed?
Yes I do
leoking3 said:
Yes I do
Click to expand...
Click to collapse
Try launching your phone into fastboot (plug in while holding volume up, wait for blue light)
Once in fastboot, try setting your active partition to partition a with the command below:
fastboot --set-active=a
The restart your phone and see if it loads.
TripodKnight said:
Try launching your phone into fastboot (plug in while holding volume up, wait for blue light)
Once in fastboot, try setting your active partition to partition a with the command below:
fastboot --set-active=a
The restart your phone and see if it loads.
Click to expand...
Click to collapse
it says: unknown option –set-active=a
leoking3 said:
it says: unknown option –set-active=a
Click to expand...
Click to collapse
This website shows the commands to use:
https://www.androidexplained.com/change-active-partition-slot/
Code:
fastboot --set-active=a
TripodKnight said:
This website shows the commands to use:
https://www.androidexplained.com/change-active-partition-slot/
Code:
fastboot --set-active=a
Click to expand...
Click to collapse
Thank you for being patient, unfortunately the device seems mega fu..ed. I dont know what could have happened sooo important that messed it up like this. I used the correct file,I followed the instructions... It goes to fastboot and it is recongnized by the PC, but the command doesnt work, it gives the response from my previous reply.. It seems that I am doomed to go to the service and that is it. Thank you very much man!
leoking3 said:
Thank you for being patient, unfortunately the device seems mega fu..ed. I dont know what could have happened sooo important that messed it up like this. I used the correct file,I followed the instructions... It goes to fastboot and it is recongnized by the PC, but the command doesnt work, it gives the response from my previous reply.. It seems that I am doomed to go to the service and that is it. Thank you very much man!
Click to expand...
Click to collapse
If your fastboot is not working properly then I agree. But I've never seen a fastboot get corrupted. Can you run any fastboot commands at all?
---------- Post added at 09:21 AM ---------- Previous post was at 09:19 AM ----------
leoking3 said:
Thank you for being patient, unfortunately the device seems mega fu..ed. I dont know what could have happened sooo important that messed it up like this. I used the correct file,I followed the instructions... It goes to fastboot and it is recongnized by the PC, but the command doesnt work, it gives the response from my previous reply.. It seems that I am doomed to go to the service and that is it. Thank you very much man!
Click to expand...
Click to collapse
For your information, I have been dealing with a bootloop the last few days. I have now just tried a new USB cable with a new USB port (not the official Sony cable) and have fixed my issues. Perhaps you could give that a try as well.
TripodKnight said:
If your fastboot is not working properly then I agree. But I've never seen a fastboot get corrupted. Can you run any fastboot commands at all?
---------- Post added at 09:21 AM ---------- Previous post was at 09:19 AM ----------
For your information, I have been dealing with a bootloop the last few days. I have now just tried a new USB cable with a new USB port (not the official Sony cable) and have fixed my issues. Perhaps you could give that a try as well.
Click to expand...
Click to collapse
I used the "fastboot devices" command and it worked, it showed me serial number of the phone. So it seems to be connected. But it doesnt want to change the boot partition. .... As for the cable, I first used a very old usb to usb c cable. Then I used one from my iqos charger. Because my laptop doesnt have a usb C port. So you really think the cable could f..k up things while flashing?? Should I try and find another one in the house maybe and try again?
leoking3 said:
I used the "fastboot devices" command and it worked, it showed me serial number of the phone. So it seems to be connected. But it doesnt want to change the boot partition. .... As for the cable, I first used a very old usb to usb c cable. Then I used one from my iqos charger. Because my laptop doesnt have a usb C port. So you really think the cable could f..k up things while flashing?? Should I try and find another one in the house maybe and try again?
Click to expand...
Click to collapse
Your ADB might be out of date and not have the A/B partition fastboot commands. Try updating through instructions here:
https://developer.android.com/studio/releases/platform-tools
I never thought a USB cable would be the issue either, but I tried a new USB port and quality cable and suddenly everything works fine.
Also confirm you're using newflasher to flash the correct firmware for your model. When I flashed the XQ-AS72 firmware on my XQ-AS52 I experienced bootloops like what you're experiencing.
If you still have issues, you can boot to recovery with these instructions and select "power off". You should be able to charge your phone to 80% to use the xperia companion app. https://www.mobilereset99.com/hard-reset-sony-xperia-1-ii/
TripodKnight said:
If your fastboot is not working properly then I agree. But I've never seen a fastboot get corrupted. Can you run any fastboot commands at all?
---------- Post added at 09:21 AM ---------- Previous post was at 09:19 AM ----------
For your information, I have been dealing with a bootloop the last few days. I have now just tried a new USB cable with a new USB port (not the official Sony cable) and have fixed my issues. Perhaps you could give that a try as well.
Click to expand...
Click to collapse
TripodKnight said:
Your ADB might be out of date and not have the A/B partition fastboot commands. Try updating through instructions here:
https://developer.android.com/studio/releases/platform-tools
I never thought a USB cable would be the issue either, but I tried a new USB port and quality cable and suddenly everything works fine.
Also confirm you're using newflasher to flash the correct firmware for your model. When I flashed the XQ-AS72 firmware on my XQ-AS52 I experienced bootloops like what you're experiencing.
If you still have issues, you can boot to recovery with these instructions and select "power off". You should be able to charge your phone to 80% to use the xperia companion app. https://www.mobilereset99.com/hard-reset-sony-xperia-1-ii/
Click to expand...
Click to collapse
Yes, unfortunately is the correct firmware.
I.will try all these solutions, thank you very very much!
leoking3 said:
it says: unknown option –set-active=a
Click to expand...
Click to collapse
You were right, it was to old to know the command. Now it takes the command but says it is not allowed in lock state
leoking3 said:
You were right, it was to old to know the command. Now it takes the command but says it is not allowed in lock state
Click to expand...
Click to collapse
Give your phone a charge and give the Xperia companion app a try.
If you use the included charger and cable, it will charge faster than it drains even if you leave it in bootloop. But you can also try powering down using recovery options.
Let me know if that works.
TripodKnight said:
Give your phone a charge and give the Xperia companion app a try.
If you use the included charger and cable, it will charge faster than it drains even if you leave it in bootloop. But you can also try powering down using recovery options.
Let me know if that works.
Click to expand...
Click to collapse
The issues is that I cannot enter the Recovery and see the options. So you are sayng that even if when I plug it in it keeps saying my phone is corrupt, it still charges?
leoking3 said:
The issues is that I cannot enter the Recovery and see the options. So you are sayng that even if when I plug it in it keeps saying my phone is corrupt, it still charges?
Click to expand...
Click to collapse
It should charge. You should be able to hold volume down on boot (green light top corner, black screen will happen) and try an xperia companion app restore by following the repair options (select "My device is not detected by computer". It should be charging as it restores from your computer as well.