Please excuse this as ive been up all night trying to fix this freakin thing all night. I have tried everything from downloading the latest stock rom and the oldest. Nothing works. My phone says:
SW REV CHECK FAIL: [system]Fused 3 > Binary 1
I have typed this in on google and have found nothjng for this. I assumed it had something to do with the PIT file as the log on the computer said get PIT for mapping.
I am literally to the point of ripping my hair out and i know i wont be able to sleep until i get this fixed.. someone please help as soon as possible.
My Model of the S7 is SM-G930T please and thank you to anyone that knows how or tries to help
Did you get any cure for the problem?
asdelpika said:
Please excuse this as ive been up all night trying to fix this freakin thing all night. I have tried everything from downloading the latest stock rom and the oldest. Nothing works. My phone says:
SW REV CHECK FAIL: [system]Fused 3 > Binary 1
I have typed this in on google and have found nothjng for this. I assumed it had something to do with the PIT file as the log on the computer said get PIT for mapping.
I am literally to the point of ripping my hair out and i know i wont be able to sleep until i get this fixed.. someone please help as soon as possible.
My Model of the S7 is SM-G930T please and thank you to anyone that knows how or tries to help
Click to expand...
Click to collapse
Try flashing all parts of the ROM except the BL, do not flash the BL
Use ODIN 3.12.3 too
See if that works
asdelpika said:
Please excuse this as ive been up all night trying to fix this freakin thing all night. I have tried everything from downloading the latest stock rom and the oldest. Nothing works. My phone says:
SW REV CHECK FAIL: [system]Fused 3 > Binary 1
I have typed this in on google and have found nothjng for this. I assumed it had something to do with the PIT file as the log on the computer said get PIT for mapping.
I am literally to the point of ripping my hair out and i know i wont be able to sleep until i get this fixed.. someone please help as soon as possible.
My Model of the S7 is SM-G930T please and thank you to anyone that knows how or tries to help
Click to expand...
Click to collapse
The pit file is inside of the CSC file but if use it you will loose all of your data! Like a factory reset....
If you use the Home_CSC you keep the data but not remapping the phone partitions with the pit file....
God luck
*Detection* said:
Try flashing all parts of the ROM except the BL, do not flash the BL
Use ODIN 3.12.3 too
See if that works
Click to expand...
Click to collapse
Enviado do meu SM-G930F através de Tapatalk
Related
I understand that there are many other posts about this particular issue but very few are solved and even if they are it is usually phone specific. There is no guide for the S6 yet, that I know of so I shall continue
Anyway I tried to flash the stock firmware using Odin to get out of a soft bricked situation. I originally tried to update the software via Smart Switch which failed. Then it asked to perform an emergency recovery via Smart Switch, this also failed spectacularly. Ive tried phoning customer support with no help as it was rooted previously.
Quick summary:
1. I unrooted then factory reset + wipe cache
2. Update via Smart Switch failed
3. Emergency recovery via Smart Switch failed
4. Odin pauses at "NAND write start" when attempting to flash
I have used Odin 3.9 and 1.3 with multiple stock firmwares both .tar.md5 and trying just .tar (it helped another user) with no results
PLEASE HELP AS I DONT WANT A 400 POUND PAPER WEIGHT
Thanks
PevDog
I had the same thing. Try a different Odin version. I used the one from the thread in the general forum. I forget which version it is. I think it is 3.10.6
Sent from my SM-G920V using XDA Free mobile app
If you just flashed Android 5.1.1 then reflashed old 5.0.2 it will not work. You may need to wait for the specific 5.1.1 firmware for your country. Sammobile is a good place to check if its available. Try changing the data cable to another one, or plugging it to USB 2 port instead of USB 3. Also disable your antivirus. Last resort is bringing your S6 back to Samsung for warranty repair. I hope it helps.
i managed to download a 5.1.1 french version which I'm trying. also i have used different ports but not a different cable. I want to try Odin 3.10.6 but every time i try to find and download it it never works
I am unsure if it was 5.1.1 or the earlier firmware I am trying to use.
Thanks for your replies guys, much appreciated. Im getting to the stage of thinking I should dump the brick and getting a new one tbh. I'v exhausted all other options as Customer support won't help knowing my warranty is void.
just to clarify i didn't flash with 5.1.1 then try to flash a lower firmware. I factory reset then tried to update through smart switch which failed and lead to this horrific bricked situation
nickgeorge333 said:
I had the same thing. Try a different Odin version. I used the one from the thread in the general forum. I forget which version it is. I think it is 3.10.6
Sent from my SM-G920V using XDA Free mobile app
Click to expand...
Click to collapse
Finally it passes NAND write start!! However It gets really close to finishing but it fails at hidden.img any ideas?
PevDog said:
Finally it passes NAND write start!! However It gets really close to finishing but it fails at hidden.img any ideas?
Click to expand...
Click to collapse
It happens on odin, there is a solution but I don't know if it works on 5.1.1, wait for my edit.
Ok here it is
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
haha sorry i already worked it out! all back up and running now!!! Thank you thank you thank you so very much :good:
Good for you. I had about 4 NAND write fails before a successful one.
Dude I had the exact same problem as you about three times! I had to extract the firmware and delete the hidden.img from it then put it back into.that format. The biggest pain..
Worst thing was waiting forever only for it to FAIL right at the end, lol.
Sent from my SM-G920I using XDA Free mobile app
work with Odin 3.10.6
I did it with Odin for 5.0.2 thanks so much
AMIGOS PARA SOLUCIONARLO USAR ODIN 3.10.6 tengo versio 5.0.1 tmobile
saludos desde Honduras
mojo_jodroid said:
Dude I had the exact same problem as you about three times! I had to extract the firmware and delete the hidden.img from it then put it back into.that format. The biggest pain..
Worst thing was waiting forever only for it to FAIL right at the end, lol.
Sent from my SM-G920I using XDA Free mobile app
Click to expand...
Click to collapse
In the last two days.....my phone suddenly started rebooting........then eventually freezing up.
Never been dropped.
Never been wet.
Never been rooted.
I tried factory reset.
Safe mode.
Reloading the firmware.
No change. The phone is a complete mess....all of a sudden.
I was thinking what if I re-partition, erase the nand? But I need a PIT file for my phone.
The recovery screen says that this is a SM-G9200. So I downloaded a PIT for that phone, bt it was the chinese variant and did not work.
Does anyone have the PIT file for this phone?
I am also welcome to any suggestions. I bought this phone brand new on Yahoo auctions japan, so I am not sure if Docomo will honor the warranty.
And did I mention I am in the middle of traveling on a business trip with a now bricked phone.
I encountered the same problem, in order to solve it, I tried a lot, even the PIT file but failed eventually. How can I send you the PIT file?
maple_CN said:
I encountered the same problem, in order to solve it, I tried a lot, even the PIT file but failed eventually. How can I send you the PIT file?
Click to expand...
Click to collapse
So......did you fix your phone?? If so....how?
maple_CN said:
I encountered the same problem, in order to solve it, I tried a lot, even the PIT file but failed eventually. How can I send you the PIT file?
Click to expand...
Click to collapse
I sent you a private message with my email.
I sent you the PIT file by e-mail just now. My phone is still bricked.
maple_CN said:
I sent you the PIT file by e-mail just now. My phone is still bricked.
Click to expand...
Click to collapse
please give me a pit file !!! Thank a lot !!!
dnquocanh said:
please give me a pit file !!! Thank a lot !!!
Click to expand...
Click to collapse
Could you send me the PIT file? I am trying flash with Odin and got No PIT partition error
Hi hope you guys can help me. I recently bought an unlock s7 but it has the three network start up screen and three bloatware on it. I downloaded the latest BTU firmware from sammobile and tried to flash it using odin hoping that this would give me a fresh unbranded firmware. When i try to flash the files (AP,BL,CSC and CP) it stops at "NAND Write start' in the dialogue box and "set partition' at the top box. What am i doing wrong? What have i to do to install the unbranded BTU firmware? Thanks in advance
Have you solved this issue ?
I have the same problem now, trying to flash an official stock rom on my S7 and it also gets stuck at "Nand write start".
Try to flash official firmeware without hidden.img inside.
That solved the issue on galaxy s6 series.
Correct me if i'm wrong.
juli.freaky said:
Try to flash official firmeware without hidden.img inside.
That solved the issue on galaxy s6 series.
Correct me if i'm wrong.
Click to expand...
Click to collapse
Thanks @juli.freaky, I will give that a try as well.
I also got another possible solution to try to flash the PIT file first.
I will try both solutions
Hope this will help.
You loose all your data if you flash a firmeware with the pit if i'm right but i'm not sure. If you flash the stpck rom without hidden.img you won't loose your data.
That's the situation on the galaxy s6 but i'm not sure how it proceed with the galaxy s7
Best regards
juli.freaky said:
Hope this will help.
You loose all your data if you flash a firmeware with the pit if i'm right but i'm not sure. If you flash the stpck rom without hidden.img you won't loose your data.
That's the situation on the galaxy s6 but i'm not sure how it proceed with the galaxy s7
Best regards
Click to expand...
Click to collapse
Thanks for the heads up, but I don't mind losing my data as I will create Titanium backups first before I flash
I will try it later this week, as I need to have a full functioning phone right now.
But I will surely post my findings here, so others can find the solution in the future.
speedme said:
Thanks for the heads up, but I don't mind losing my data as I will create Titanium backups first before I flash
I will try it later this week, as I need to have a full functioning phone right now.
But I will surely post my findings here, so others can find the solution in the future.
Click to expand...
Click to collapse
Before you flash the BTU firmware have a look at this thread relating to the Identify Unsaved Numbers option here as your not in the UK, you may need to modify the others.xml as mentioned in the last post otherwise the option will be grayed out.
With your phone connected to you PC in developer options turn off USB Debugging then turn it on again and see if the message pops up on your phone to Authorize your PC it can reset the authorization which will allow Odin to work properly, use Odin 3.10.7.
Check in developer options that OEM Unlock is turned on then when you boot into download mode make sure FRP is Off.
was having same issue, came here for the answer, tried some of the mentioned things that didn't work but when downloaded the latest odin and flashed with it, it was worked like a charm.
also the post above mine is very helpful. so do read it.
S6 FIDO G920W8 stuck on NAND WRTE
I am looking for immediate assistance on NAND write stuck. Please reccomend me right verision of boot loop and modem. I am going crazy when my phone does not register sim card, no imei and does not work with Z3X Box.
Thanks
1. get the odin 3,11 not the one from samsung site
2. try a diferent CSC, that helped me today
juli.freaky said:
Try to flash official firmeware without hidden.img inside.
That solved the issue on galaxy s6 series.
Correct me if i'm wrong.
Click to expand...
Click to collapse
I have the same problem.
How can I do this?
Good day everyone. I am totally new to this and on here but hope is something I came with and will always be a part of my beliefs.. I did flash my Samsung S7 SM-G930F a couple of times with different kind of custom ROMS and I guess I upgraded the bootloader by doing so... So now I was in TWRP mode and without thinking, I started to change the DATA format and immediately switched it off when I realized what exactly I'm doing and now it's stuck. It can switch on only with a charger and by force but I am capable of getting into download mode. I am trying to flash a stock ROM but it keeps on failing cause of the bootloader. When I use the PIT file, it shows successful though. But nothing more happens. Any help would be appreciated. Thank you in advance.
Andre369 said:
Good day everyone. I am totally new to this and on here but hope is something I came with and will always be a part of my beliefs.. I did flash my Samsung S7 SM-G930F a couple of times with different kind of custom ROMS and I guess I upgraded the bootloader by doing so... So now I was in TWRP mode and without thinking, I started to change the DATA format and immediately switched it off when I realized what exactly I'm doing and now it's stuck. It can switch on only with a charger and by force but I am capable of getting into download mode. I am trying to flash a stock ROM but it keeps on failing cause of the bootloader. When I use the PIT file, it shows successful though. But nothing more happens. Any help would be appreciated. Thank you in advance.
Click to expand...
Click to collapse
I don't own an S7 so maybe not much help.
From screen shot above try using Odin version 3.13.1 or higher.
Can you post a screen shot of download mode and Odin when it fails
If you can still get into download mode there should be a line saying AP SWREV: B:? K:? S:? or something similar.
The B:? is your bootloader version number. You will need to flash firmware with this number or higher.
spawnlives said:
I don't own an S7 so maybe not much help.
From screen shot above try using Odin version 3.13.1 or higher.
Can you post a screen shot of download mode and Odin when it fails
If you can still get into download mode there should be a line saying AP SWREV: B:? K:? S:? or something similar.
The B:? is your bootloader version number. You will need to flash firmware with this number or higher.
Click to expand...
Click to collapse
Thank you for the response I managed to get it fixed. I used odin 3.14 instead and I wiped it with the NAND option and started from scratch. I used the pit file and flushed the bootloader first with repartition, then did the AP separete, and thats how I went on. After all, I'm back again. Thank you for trying, much appreciated.
I was trying to install twrp but I made a big mess..
i tried to reinstall my stock firmware (https://www.sammobile.com/samsung/g...M-J330FN/OMN/download/J330FNXXS4CUD3/1539502/)
i put
BL
AP
CP
CSC
But it Fails always
i tried only ap and start with odin and now just say:
KERNEL REV. CHECK FAIL DEVICE:1.
BINARY:0.
On top left of screen ,
the screen turns off and on again
i dont know what to do really
i Solved alone
dravd said:
i Solved alone
Click to expand...
Click to collapse
how?