Vendor Country Info - not information - file not exist ** # * # 2846579 # * # * - Mate 8 Q&A, Help & Troubleshooting

Hi friends
I use [ROM] [B386] KangVIP Slim ViperAtmos Black Pyramid Theme **UPDATE 11/01/16** and I'm going to try Nougat, but if something went wrong I want to return stockFirmware.
ProjectMenu when I enter the code * # * # 2846579 # * # * - get this response " Vendorn Country file not exist".
You can help me someone with it? How do I access information?
L29 phone I purchased through eBay UK, but I think there was a code C636. Example for Version Info. Will help?
In file DLOAD - SDcard I still have the original (B320 international) update.app I have had to use in the transition Emui4 to 4.1 when I was going through to the custom ROM. This vendor information can be found from the update.app?

Just fastboot oeminfo and custom bin for c636 using srk tool then reflash stock recovery 4.1 again with srk tool and dload C636B320. finally hard reset. you will lose your data so backup just in case.

@khanem thank you, but I want get CountryInfo
Regular contributors (alphabetically) ajsmsg78 , bluheart , ephemera , Hen Ry, jbmc83 , pappschlumpf or somboons surely know the answer - please advise.

peterge said:
Hi friends
I use [ROM] [B386] KangVIP Slim ViperAtmos Black Pyramid Theme **UPDATE 11/01/16** and I'm going to try Nougat, but if something went wrong I want to return stockFirmware.
ProjectMenu when I enter the code * # * # 2846579 # * # * - get this response " Vendorn Country file not exist".
You can help me someone with it? How do I access information?
L29 phone I purchased through eBay UK, but I think there was a code C636. Example for Version Info. Will help?
In file DLOAD - SDcard I still have the original (B320 international) update.app I have had to use in the transition Emui4 to 4.1 when I was going through to the custom ROM. This vendor information can be found from the update.app?
Click to expand...
Click to collapse
What about your phone model?
NXT-L09, NXT-L29, NXT-AL10, NXT-CL00, NXT-DL00 or NXT-TL00
Mentioned on back of your phone like this image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello,
I have the same problem with my phone DL00
Thank you

Related

[Q] Firmware Huawei Ascend G6-U10

Hello, does anyone have a link for it?
(g6-u10v100r001c900b118)
Prototyp206 said:
Hello, does anyone have a link for it?
(g6-u10v100r001c900b118)
Click to expand...
Click to collapse
http://consumer.huawei.com/it/support/downloads/detail/index.htm?id=24029
Thanks, i also contacted huawei and they said, that there is no firmware to download.
Is this firmware for austria too? Cause in the description are only Spain, Italy, Germany, Belgium, Netherlands and Portugal listed.
The only problems i have whit that firmware is, that there is no toolbar to turn Wi-Fi, Bluetooth ... on / off and the "2G only, 2G/3G Automatically" Setting is missing in the network menu.
here
First you must be ROOT
Second with Root Explorer app, go to the folder "data" and see the contents of custom.bin
Depending on the file custom.bin say, is as it should rename folders CUST.
For example if it says "Orange/dm", that means that inside the folder "CUST" the folder must exist "Orange" and within it another folder "dm".
If not there you can rename the folder "Channel" to "Orange" and within it you choose to rename the folder to "dm" much of the country that depends on where you live, could be renamed folder "namerica" to "dm" or "neeurope" to "dm"
Finally do a factory reset
custom.bin contains only "hutchison/at"
So i created inside the CUST folder the folder "hutchison" and inside it the folder "at" and copied the content of "hw" into it.
Full list:
CUST
- hutchison
- - at
- hw
- ru
- lost+found
After factory reset only the boot animation changed (from the Android text to a Huawei logo), but the toolbar is still not present.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ANY ONE CAN GIVE ME LINK TO DOWNLOAD THAT ROM
haninatoon said:
ANY ONE CAN GIVE ME LINK TO DOWNLOAD THAT ROM
Click to expand...
Click to collapse
Here is the Link bro
http://www.needrom.com/wp-content/uploads/2014/11/G6-U10-V100R001C900B120.rar
hi
Hi vcan i install the 4.4.2 rom in my device.
my phones build number is v100r001c900b120

Kitkat update for Ascend G6-U10

Goodday to you all
My name is william i come out the netherlands and i have great news for Huawei Ascend G6-U10 users
Today i was surfing on the web for the kitkat update and there i came across an site.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.carbontesla.com/2015/02/ascend-g6-u10-b330-emui-3-0-kitkat/
There i found a link to the B330 update zip before i thought it was yet another false download but i download it en put the dload map
out the zip file on the root of my SD-card and perform the update thru system update and then lokal update option.
when i press that my restart itself and then i came in the android update menu and i cannot believe my own eyes he was installing the update and now i,m the proud of an ascend G6-U10 with kitkat version 4.4.2 .
i will make photos of my phone info and will them attached in this thread as prove.
so if you also whant it on youre phone just download the B330 update.zip from the site i listed in the description
when you have downloaded it unzip it and then you hook youre phone on the computer and then put the dload map directly on the main-root of youre sd-card and then you go to settings-about phone-system update-and then you select lokale update and then he will ask you if you whant to make an back-up you can but i did it without an backup but if you whant besure about it then you can make an back-up you phone will reboot automaticly in to the android update program and it will install the update and then will reboot 2 times and bij the second the phone will take a will for the first time booting up.
and then when it boot up to mainscreen you can set the language to any one and then just signin with youre google account and then you also have kitkat 4.4.2 on the Ascend G6-U10.
I hope i have contributed you al with pleasure greetzz william
Ps: it,s an official release from huawei self.
I found thuis update too, on androidhilfe. I am from the netherlands also. This rom is a great improvement, brightness controller is now working as it is supposed to work.
It is fast, only disadvantage is that it is rather big. So it leaves few space for installing other apps. I will try to root my phone to remove some system apps.
Don't want to start a Dutch enclave here, but living in The Netherlands, this works great. All we have to find is a new way to root our device. RootGenius, KingoRoot and Towelroot all fail. Any suggestions?
donnn't download
it's lower than official rom... i tested it.
Lower than what? Build number? Preformance?
I can't install any rom after i installed B146, idon't know what can i do. Please help me. Tnks

[Custom Rom]Galaxy S5 for Huawei G730 U00

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Here is Galaxy S5 Rom for Huawei G730 U00...
This rom is only for G730 U00,
What is working:
Everthing is working as far as tested.
Bugs:
Fingerprint lock cause of handset issue.
Installation Instruction
(1) flash CWM recovery on Huawei G730 U00.
(2) put Huawei G730U00 Galaxy S5.zip on your SD card.
(3) Power off your phone and pull out battery for about 5 seconds and put it back
(4) Press (Power Button+Volume Up) to enter into CWM recovery mode.
(5) Before flash, perform Wipe data factory reset, wipe cache, wipe dalvik.
(6) Install zip from sdcard>>find Huawei G730U00 Galaxy S5.zip from your sdcard. and flash it.
(7) After flashed, perform Wipe Data & factory reset, and Reboot.
That's it!!
#Worked and Tested by Chin Lay.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
Mirror
Version Information
Rom Os Version: SM-G900T, 4.4.2 (kitkat)
Kernel version: 3.4.5
MT6582
Stable, daily use..
Notes: If you want to port this rom to other MT6582, kernel 3.4.5
Reply with working version, N' it's not a real Kitkat
Credits: Devs of this. Not me
Sent from my HUAWEI G730-U00 using XDA Free mobile app
Dose it working good???
can anyone answer !! dose it working on huawei G730-U10 b119 ???
mahmoud.omar said:
can anyone answer !! dose it working on huawei G730-U10 b119 ???
Click to expand...
Click to collapse
No, it will not work.
only for G730 U00
IMEI
I don't have IMEI. Any suggestion?
Dowload
I can't dowload the file.
Always says: Wrong IP.
can you please upload the files in another dowload server? PLEASEEEEEEEEEEEEEEEEEEEE

Identify and update 4c

Hello guys I have a 4c on KitKat I want to upgrade it's os but it is not getting ota and no update on hisuite
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I used this thread to identify it
But then I came across this guide
And now I am pretty confused as u can see in the screenshot it's a b130 which shows its Russian but before b130 it says c185 which indicates Pakistani device Kindly guide me which one to download I have downloaded the update from huawei official site but in the document it says can only be applied to b120 or b067.
I haven't tried installing it because I don't want to brick it and I haven't tried changing region although Im familiar with this stuff on my other device(MotoG) because 1)it's my friends device 2)I don't want to void warranty
What you guys says will it brick or update will be halted with error message(I'm not familiar with huawei phones)
for some reason image was not appearing in OP I guess it is visible now if not the use the link
http://m.imgur.com/nN2VjPh
faizxy said:
Hello guys I have a 4c on KitKat I want to upgrade it's os but it is not getting ota and no update on hisuite
I used this thread to identify it
But then I came across this guide
And now I am pretty confused as u can see in the screenshot it's a b130 which shows its Russian but before b130 it says c185 which indicates Pakistani device Kindly guide me which one to download I have downloaded the update from huawei official site but in the document it says can only be applied to b120 or b067.
I haven't tried installing it because I don't want to brick it and I haven't tried changing region although Im familiar with this stuff on my other device(MotoG) because 1)it's my friends device 2)I don't want to void warranty
What you guys says will it brick or update will be halted with error message(I'm not familiar with huawei phones)
Click to expand...
Click to collapse
Try downloading update from the consumer.huawei.com
Srilal said:
Try downloading update from the consumer.huawei.com
Click to expand...
Click to collapse
Ty for your reply I started to think that 4c's XDA is dead
And about the consumer.huawei.com it gives the one for c185b120

[ROM][Lineage 13][Unofficial][Intex Cloud Q11][Bugless]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This rom is ported by TAPAS DUTTA and modified by me.This will work for only Intex cloud Q11..
Requirements:
A working device with 60 or above percent charge
TWRP Recovery installed
Cup of coffee
To install TWRP see this
https://forum.xda-developers.com/android/development/twrp-3-1-0-0-intex-cloud-q11-t3684055
Instructions:
Backup your currect rom incase if something went wrong..
Boot to TWRP and wipe factory reset..
Flash the rom and G apps..
wait for the device to boot..
Enjoy the rom..
What's working:
you tell me
Note:
This rom is just ported from other device ...so don't expect it to be perfect..
Google apps are not included in this rom...so simply download it from the below link..and flash it after flashing the rom..
Links:
Rom Link:
https://drive.google.com/open?id=1sw9fjxkR9XNFwI6HBbJlrF9VKWH1hoqD
Gapps link: (Select arm 6.0 pico or nano) (Don't use a heavy one rather than this.... it consumes system space)
http://opengapps.org/
Credits:
TAPAS DUTTA
Lineage team
Me
Donate if you want more roms like this....
Nothing is free in this world..
Hit the thanks button...
Reserved
Reserved for screenshots
..
The sim cards aren't detected by the device...
Please provide the bug fix for it....
Aryan Karan said:
The sim cards aren't detected by the device...
Please provide the bug fix for it....
Click to expand...
Click to collapse
This rom is only for non 4G variant
Yes mine is 3g variant...but still sim card not detected
Aryan Karan said:
Yes mine is 3g variant...but still sim card not detected
Click to expand...
Click to collapse
Dude,
U need to flash stock rom's secro.img
This happened because ur device's IMEI is either corrupted or wiped
Fixes :----->
1. Flash secro.img of stock rom OR
2. Only If stock rom installed , install mtk engineering mode apk and then repair IMEI

Categories

Resources