No Network Issue after DC Phoenix Factory image flash - Mate 8 Q&A, Help & Troubleshooting

Hi All,
I bricked my phone pretty badly couple of days ago. It was not booting and was not allowing me to go to the recovery and also fastboot was not flashing anything at all. Even unlock bootloader command was failing.
So, as a last resort, I flashed my NXT - L29 with the factory image of AL10 from DC-Unlocker Phoenix software. Also after that I restored the IMEI and all other stuff.
Problem is that after doing that my phone is not picking up any network. It was showing sim locked initially which I unlocked using the codes generated by DC-Unlocker and the phone now is not showing locked to carrier but still it is not picking up any of the service provider's network. I tried Airtel and Jio (I am in India). Strange thing is that it is not even listing any networks when I go and search for them manually in network options. Not even in 2G or 3G specific modes.
To overcome this issue, I debranded my phone to C636 and C185 as well but the result is the same. No network.
I suspected that somehow the bands got changed from TD LTE to FDD LTE which is causing the issue as in India all 4G rpoviders use only TD LTE right now.
Now my question is that is there any way to get back to the TD LTE and should this effect 2G and 3G coverage as well.
Any help will be hugely appreciated as the phone is right now a brick even if it boots up and functioning fine. :crying::crying:

I don't know much about dc unlocker but do they have l29 factory image to flash?
What about the baseband in about phone is it showing correct and ur imei?

gm007 said:
I don't know much about dc unlocker but do they have l29 factory image to flash?
What about the baseband in about phone is it showing correct and ur imei?
Click to expand...
Click to collapse
They do not have L29 factory image.
However, I already restored the imei and unlocked everything.
Sent from my A0001 using Tapatalk

What was ur original region l29c...?
Did you use srk tools to debrand?
Check this link for how to debrand
Think the oem info is what is causing the problem.

sozofriend1234 said:
Hi All,
I bricked my phone pretty badly couple of days ago. It was not booting and was not allowing me to go to the recovery and also fastboot was not flashing anything at all. Even unlock bootloader command was failing.
So, as a last resort, I flashed my NXT - L29 with the factory image of AL10 from DC-Unlocker Phoenix software. Also after that I restored the IMEI and all other stuff.
Problem is that after doing that my phone is not picking up any network. It was showing sim locked initially which I unlocked using the codes generated by DC-Unlocker and the phone now is not showing locked to carrier but still it is not picking up any of the service provider's network. I tried Airtel and Jio (I am in India). Strange thing is that it is not even listing any networks when I go and search for them manually in network options. Not even in 2G or 3G specific modes.
To overcome this issue, I debranded my phone to C636 and C185 as well but the result is the same. No network.
I suspected that somehow the bands got changed from TD LTE to FDD LTE which is causing the issue as in India all 4G rpoviders use only TD LTE right now.
Now my question is that is there any way to get back to the TD LTE and should this effect 2G and 3G coverage as well.
Any help will be hugely appreciated as the phone is right now a brick even if it boots up and functioning fine. :crying::crying:
Click to expand...
Click to collapse
I have same problem as your but with P9 after using DC unlocker and phonex also HCU Clint to roster IMEI ,now no signal !
if you come with solution pls let me know .

copysat said:
I have same problem as your but with P9 after using DC unlocker and phonex also HCU Clint to roster IMEI ,now no signal !
if you come with solution pls let me know .
Click to expand...
Click to collapse
me too,
with my mate 8 from China NXT-ALC10, after a brick to change it in NXT-L29 and restore with
DC-unlocker, DC Phoenix and Hcu-client
the two SIM don't work are blind!!
There is an issue in to the software recovery DC ecc ecc or BASEBAND is bricked??
is possible a file check with radio information or backup??
thank You for answer
p.s. this link is good??
hxxp://recomhub.com/blog/how-to-fix-huawei-mate-8-not-registered-on-network-and-repair-null-imei-number/

mcanton said:
me too,
with my mate 8 from China NXT-ALC10, after a brick to change it in NXT-L29 and restore with
DC-unlocker, DC Phoenix and Hcu-client
the two SIM don't work are blind!!
There is an issue in to the software recovery DC ecc ecc or BASEBAND is bricked??
is possible a file check with radio information or backup??
thank You for answer
p.s. this link is good??
hxxp://recomhub.com/blog/how-to-fix-huawei-mate-8-not-registered-on-network-and-repair-null-imei-number/
Click to expand...
Click to collapse
The code in the link does not work on mate 8. May be they have just assumed that it should work and it might be a generic code. I found that link when I was looking for solutions and many more like this but they do not work. The codes mentioned on the most of the tutorials are not working on mate 8. I think USSD codes are partially disabled on our phone.

gm007 said:
What was ur original region l29c...?
Did you use srk tools to debrand?
Check this link for how to debrand
Think the oem info is what is causing the problem.
Click to expand...
Click to collapse
Did the steps again. Debranded to C185320 but still the same. No network. :crying::crying::crying:

sozofriend1234 said:
Did the steps again. Debranded to C185320 but still the same. No network. :crying::crying::crying:
Click to expand...
Click to collapse
Try to dload c185b200 cause b320 is not officially released.

gm007 said:
Try to dload c185b200 cause b320 is not officially released.
Click to expand...
Click to collapse
Tried with c636b200 but the same. No signal.
Sent from my A0001 using Tapatalk

dont waste your time guys, dbrand or flashing original firmware will not solve the problem i ve tried all possible ways to make it work with no hope.
The best way to contact DC-unlock to find solutions.

copysat said:
dont waste your time guys, dbrand or flashing original firmware will not solve the problem i ve tried all possible ways to make it work with no hope.
The best way to contact DC-unlock to find solutions.
Click to expand...
Click to collapse
Contacted the tech support of DC as well. As per them this is a limitation of firmware flashed. Only solution as per them is to flash L29 factory firmware which they do not have. Or contact huawei.

the link below is a fake?
hXXp://recomhub.com/blog/how-to-fix-huawei-mate-8-not-registered-on-network-and-repair-null-imei-number/
Thank You

mcanton said:
the link below is a fake?
hXXp://recomhub.com/blog/how-to-fix-huawei-mate-8-not-registered-on-network-and-repair-null-imei-number/
Thank You
Click to expand...
Click to collapse
Yes mate.
Sent from my A0001 using Tapatalk

I have the same problem but the funny thing that I can send sms very normally but can't make phone calls .....!!!!
Any Help will be most appreciated .

Have the same problem with my al10 and a g8 rio-l01
I repaired the al10 like you and flashed with the stock china rom (ota update work) but no service, the working code in al10 is *#*#6130#*#* not 4636 (you will se the phone is in VoLTE mode) but you can't do nothing, there is no service (i think we need to flash the radio)
For the g8 its an mea version repaired by the same way but this one got more problem it boot but with factory run mode and no service too
Hope we will find a solution (asked dc unlock team and im waiting)

makabress said:
Have the same problem with my al10 and a g8 rio-l01
I repaired the al10 like you and flashed with the stock china rom (ota update work) but no service, the working code in al10 is *#*#6130#*#* not 4636 (you will se the phone is in VoLTE mode) but you can't do nothing, there is no service (i think we need to flash the radio)
For the g8 its an mea version repaired by the same way but this one got more problem it boot but with factory run mode and no service too
Hope we will find a solution (asked dc unlock team and im waiting)
Click to expand...
Click to collapse
Update: edited the g8 country to: normal and i got signial and the correct network but i cant make a call do the factory mode
Also trayed with the mate 8 vendor: hw region: normal / and hw,cn and all,cn but no result stuck with no service

makabress said:
Update: edited the g8 country to: normal and i got signial and the correct network but i cant make a call do the factory mode
Also trayed with the mate 8 vendor: hw region: normal / and hw,cn and all,cn but no result stuck with no service
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what I see. No network type or LTE mentioned. Mine was L29 and is on L29 ROM right now.
Sent from my A0001 using Tapatalk

sozofriend1234 said:
This is what I see. No network type or LTE mentioned. Mine was L29 and is on L29 ROM right now.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Debrand to C636B200 and reboot and use this. Your network problems will be solved.

bluheart said:
Debrand to C636B200 and reboot and use this. Your network problems will be solved.
Click to expand...
Click to collapse
(and use this...) use what??

Related

No Network/No SIM Registered

Hi, after unlocking Bootlock and flash ROM do not signal a SIM is not registered on the network. I tried to lock the bootloader back then flash through flashtool and bottles pccompanion always all right but not the signal even if the phone reads SIM. On xda I've only found a similar problem is solved in Xperia SP http://forum.xda-developers.com/xperia-sp/general/how-to-fix-network-baseband-missing-imei-t2865378 where the problem solved flash Baseband. Please does anyone baseband Xperia L C2105 15.3.A.1.17 or a fix? Baseband is not part of the official ROM? thank you
My phone: Xperia L c2105, SI 1277-5039
Czech republic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download latest official tft for c2105 and flash via flashtool. Do not exclude anything from flashing. Latest tft can be found in general section of Xperia L forum
Sent from my C2105 using Tapatalk
No change. Flash last stock rom was ok but the phone has no signal.
registrace2013 said:
No change. Flash last stock rom was ok but the phone has no signal.
...
Click to expand...
Click to collapse
I have the same problem apparently, although I'm on CM12./12.1 and not on stock rom.
Phone asks for the PIN of the SIM when starting, confirms ok, then it does not register to (any) network carrier.
When I go to settings and do a search for network operators, it does not find anything.
Tried installing different custom roms, no change (can't flash stock again)
Is there an app to see the info available (like with the Sony service menu *#SERVICE#* ) on the screenshot ?
it's hardware problem i had a the same problem long time ago if i were you i would go to the sony's company branch in the country to fix this problem by the way before going remove root and relock bootloader and remover recovery this will get back your warranty if your xperia L warranty time didn't get expired !
and by the way don't tell them about anything of flashing cm or making software or anything just pretend that you don't know any thing about what happened !
Ebrahem-EVIL said:
it's hardware problem i had a the same problem long time ago if i were you i would go to the sony's company branch in the country to fix this problem by the way before going remove root and relock bootloader and remover recovery this will get back your warranty if your xperia L warranty time didn't get expired !
and by the way don't tell them about anything of flashing cm or making software or anything just pretend that you don't know any thing about what happened !
Click to expand...
Click to collapse
Can you tell me what exact defect your phone had, if you remember ?
I always do that when servicing a phone .. but it got in for service a few months back, they had changed the motherboard.
Thing is, that tmotherboard seems to be faulty (antenna ?) now and the warranty has expired according to them.
That's untrue since the warranty gets prolonged for service by 3 months each time the phone gets back repaired from them.
Now they pretend the defect is caused by bad handling of the phone (shocks and so on) ... what a bunch of $*&!#
So.. back to square one, any ideas ?
You, guys, probably deleted the modem partition of the phone... (unintentionally of course)
Have you backupped it?
Kahana82 said:
Can you tell me what exact defect your phone had, if you remember ?
I always do that when servicing a phone .. but it got in for service a few months back, they had changed the motherboard.
Thing is, that tmotherboard seems to be faulty (antenna ?) now and the warranty has expired according to them.
That's untrue since the warranty gets prolonged for service by 3 months each time the phone gets back repaired from them.
Now they pretend the defect is caused by bad handling of the phone (shocks and so on) ... what a bunch of $*&!#
So.. back to square one, any ideas ?
Click to expand...
Click to collapse
the problem was that my phone was not detecting that i have sim card they told me that happened because of electirc shock !
GreyLDroid said:
You, guys, probably deleted the modem partition of the phone... (unintentionally of course)
Have you backupped it?
Click to expand...
Click to collapse
Nope I have no backup, but I have all the files from inside the latest stock rom ftf
Except I can't flash it with th Sony update program (because of the internal memory mod I used).
Last ime I tried, Flashtool asked about some kind of usb-profile to let the flashing happen (which I don't have)...so I'm stuck.
Is there a way to flash the modem from command line instead ?
Kahana82 said:
Nope I have no backup, but I have all the files from inside the latest stock rom ftf
Except I can't flash it with th Sony update program (because of the internal memory mod I used).
Last ime I tried, Flashtool asked about some kind of usb-profile to let the flashing happen (which I don't have)...so I'm stuck.
Is there a way to flash the modem from command line instead ?
Click to expand...
Click to collapse
Try to find out your IMEI (dialer *#06#), if you have no IMEI, your modem is broken, if you have, then it's something else
Sent from my Taoshan using XDA
Aenadon said:
Try to find out your IMEI (dialer *#06#), if you have no IMEI, your modem is broken, if you have, then it's something else
Sent from my Taoshan using XDA
Click to expand...
Click to collapse
I have same problem and I did what you told. I have no IMEI, then what should I do to fix this.
michael203 said:
I have same problem and I did what you told. I have no IMEI, then what should I do to fix this.
Click to expand...
Click to collapse
Without backup of your very own modem partition, I think that there is nothing you can do about it... (Not even the FTF can help you)
Sent from my taoshan using XDA Labs
no service.
Aenadon said:
Try to find out your IMEI (dialer *#06#), if you have no IMEI, your modem is broken, if you have, then it's something else
Sent from my Taoshan using XDA
Click to expand...
Click to collapse
hii, m having the same no service issue. I flashed stock C2104_15.0.A.2.17_India.ftf, it had a option of MiscTA exclude SIMLOCK click box, i did that which even asked that it may brick the device, however i still flashed that. Flashing was ok. But after switching on there's no service, the sim is detected, and it can search available networks, when try to register, it registers but , still no service. IMEI is still there, so about the stuff you were talking that modem might be broken. I hope it's not. I tried flashing other versions of stock rom , even the latest one,, still no changes. Can you suggest something anyhelp. and yeah i'm not able install any kernel or recovery thru the flashtool. and tried other methods , but can't install recovery,, so can't install custom rom. any help would be appreciated.
registrace2013 said:
Hi, after unlocking Bootlock and flash ROM do not signal a SIM is not registered on the network. I tried to lock the bootloader back then flash through flashtool and bottles pccompanion always all right but not the signal even if the phone reads SIM. On xda I've only found a similar problem is solved in Xperia SP http://forum.xda-developers.com/xperia-sp/general/how-to-fix-network-baseband-missing-imei-t2865378 where the problem solved flash Baseband. Please does anyone baseband Xperia L C2105 15.3.A.1.17 or a fix? Baseband is not part of the official ROM? thank you
My phone: Xperia L c2105, SI 1277-5039
Czech republic
Click to expand...
Click to collapse
Kahana82 said:
I have the same problem apparently, although I'm on CM12./12.1 and not on stock rom.
Phone asks for the PIN of the SIM when starting, confirms ok, then it does not register to (any) network carrier.
When I go to settings and do a search for network operators, it does not find anything.
Tried installing different custom roms, no change (can't flash stock again)
Is there an app to see the info available (like with the Sony service menu *#SERVICE#* ) on the screenshot ?
Click to expand...
Click to collapse
michael203 said:
I have same problem and I did what you told. I have no IMEI, then what should I do to fix this.
Click to expand...
Click to collapse
ruderocky said:
hii, m having the same no service issue. I flashed stock C2104_15.0.A.2.17_India.ftf, it had a option of MiscTA exclude SIMLOCK click box, i did that which even asked that it may brick the device, however i still flashed that. Flashing was ok. But after switching on there's no service, the sim is detected, and it can search available networks, when try to register, it registers but , still no service. IMEI is still there, so about the stuff you were talking that modem might be broken. I hope it's not. I tried flashing other versions of stock rom , even the latest one,, still no changes. Can you suggest something anyhelp. and yeah i'm not able install any kernel or recovery thru the flashtool. and tried other methods , but can't install recovery,, so can't install custom rom. any help would be appreciated.
Click to expand...
Click to collapse
There are 8 gold pins at the point your sim card goes in, see if any of the pins are pushed down in comparison with the others...
If yes try with a ''pin'' (the pointy one) to lift them up, very carefully because they are fragile.
Now insert your sim back and reboot.:highfive:
if I were to lock the bootloader, sony companion could repair the problem of not recognizing the SimCard ..?
I have a problem with a xperia L c2104, release the bootloader with flastool (imei flastool me that gender was not my device) the device was semi brick, flashe a ROM stock TFT and start the mobile system remained without recognizing the mobile network (emergency calls only) How can I solve this problem?

FIXED. Lost serial number // Galaxy S7 softbrick // SPRINT

I have somehow managed to lose my S/N completely from my Sprint S7. Doesn't show in Settings > system status.
Only shows IMEI and MEID info for "#*06#."
Peeled sticker off back like an idiot .
When I 'Home + vol down + pwr' then 'home' only shows MEID
So essentially- in a nutshell- I'm trying to repair my phone with Kies/SS, they are requesting my S/N and none of these numbers work. Somewhere along the way of rooting i wiped my S/N from my S7 no idea how...if anyone could be of any assistance it would greatly be appreciated!
Bnapi92 said:
I have somehow managed to lose my S/N completely from my Sprint S7. Doesn't show in Settings > system status.
Only shows IMEI and MEID info for "#*06#."
Peeled sticker off back like an idiot .
When I 'Home + vol down + pwr' then 'home' only shows MEID
So essentially- in a nutshell- I'm trying to repair my phone with Kies/SS, they are requesting my S/N and none of these numbers work. Somewhere along the way of rooting i wiped my S/N from my S7 no idea how...if anyone could be of any assistance it would greatly be appreciated!
Click to expand...
Click to collapse
Try updating the firmware with Odin and you will be fine! You can download the orig firmwares of sammobile.
Look at the backside about an inch from the bottom. You might need a magnifying glass or a loupe.
RiTCHiE007 said:
Try updating the firmware with Odin and you will be fine! You can download the orig firmwares of sammobile.
Click to expand...
Click to collapse
The most current firmware sam has is outdated right now. I updated my firmware right before so i keep getting a FAIL (AUTH) prompt in Odin...Cause you know i couldn't have made this situation more difficult . & For the numbers on the back of the phone none have worked for smart switch.
UPDATE: Phone is now soft bricked.... No idea how just does a pulsating vibrate loop upon boot.
So where im at now, phones showing an exclamation mark with the use recovery prompt. Have access to download mode. Flashing stock firmware fails through ODIN with (auth) code. No serial number to use kies or SS. The only way to get this OS stable again is through Odin with the most current firmware...which was just released like 2 days ago & I can't find ANYWHERE. otherwise this is a really expensive brick plz help!!!!!
Bnapi92 said:
So where im at now, phones showing and exclamation mark with the use recovery prompt. I have access to download mode. Flashing stock firmware fails through ODIN with (auth) code. No serial number to use kies or SS. I think the only way i can get this OS stable again is through Odin with the most current firmware...which was just released like 2 days ago & I can't find ANYWHERE. otherwise this is a really expensive brick i own plz help!!!!!
Click to expand...
Click to collapse
G930P on Sprint?
Firmware is on sammobile, and will be available with the samfirm tool too
If not G930P, which model S7?
Bnapi92 said:
So where im at now, phones showing and exclamation mark with the use recovery prompt. I have access to download mode. Flashing stock firmware fails through ODIN with (auth) code. No serial number to use kies or SS. I think the only way i can get this OS stable again is through Odin with the most current firmware...which was just released like 2 days ago & I can't find ANYWHERE. otherwise this is a really expensive brick i own plz help!!!!!
Click to expand...
Click to collapse
Well if you have a G930F then i would just download a other region firmware that is newer then yours. This should do the trick and why didnt you keep the box of the phone?
If the S/N eched on the back of the phone doesn't work with SmartSwitch, then there really is something fishy going on. Maybe the phone is blacklisted?
gerhard_wa said:
If the S/N eched on the back of the phone doesn't work with SmartSwitch, then there really is something fishy going on. Maybe the phone is blacklisted?
Click to expand...
Click to collapse
No it is because it is a sprint phone they use DEC not S/N and are not compatible with Smart switch recovery...talked to a rep lastnight stupidest thing I've ever heard.
*Detection* said:
G930P on Sprint?
Firmware is on sammobile, and will be available with the samfirm tool too
If not G930P, which model S7?
Click to expand...
Click to collapse
SM-G930P you're right but as of the other nights update i can't find the most current official firmware that ODIN will authorize.
Bnapi92 said:
SM-G930P you're right but as of the other nights update i can't find the most current official firmware that ODIN will authorize.
Click to expand...
Click to collapse
Might not be on the servers yet, takes a couple days after OTA for the full ROM to hit servers IIRC
Bnapi92 said:
No it is because it is a sprint phone they use DEC not S/N and are not compatible with Smart switch recovery...talked to a rep lastnight stupidest thing I've ever heard.
Click to expand...
Click to collapse
The MEID by DEC replaces the IMEI used in other countries. This is an individual unique identifier related to the cellular networks and is not controlled by Samsung. The Samsung serial number on the other hand is up to Samsung and this is the number you use with SmartSwitch. It could be that Sprint phones are not compatible with SmartSwitch, but this can not have anything to do with the MEID DEC being used instead of IMEI. I would think that the other US networks uses MEID DEC instead of IMEI too and so you mean that they too are incompatible with SmartSwitch?
gerhard_wa said:
The MEID by DEC replaces the IMEI used in other countries. This is an individual unique identifier related to the cellular networks and is not controlled by Samsung. The Samsung serial number on the other hand is up to Samsung and this is the number you use with SmartSwitch. It could be that Sprint phones are not compatible with SmartSwitch, but this can not have anything to do with the MEID DEC being used instead of IMEI. I would think that the other US networks uses MEID DEC instead of IMEI too and so you mean that they too are incompatible with SmartSwitch?
Click to expand...
Click to collapse
I don't mean to assume that it isn't compatible at all, but what the rep told me is that sprint does not use S/N but instead DEC & the DEC # is not compatible with smart switch. It may be compatible but from everywhere I've searched a S/N does not exist for my phone. Spoken to sprint and samsung about it...
UPDATE: further information, my phone was rooted and flashed with ODIN. everything was fine until i went through the steps to re enable my service. i disable a couple things in buildprop.editor, restarted my phone and got stuck in a boot loop. I can access recovery but i flashed twrp so it's custom.
UPDATE: I have gotten the firmware information from sprint. I need the G930PVPS4APJ2 firmware. If anyone can be of assistance with this it isn't available on sam yet.
Bnapi92 said:
UPDATE: I have gotten the firmware information from sprint. I need the G930PVPS4APJ2 firmware. If anyone can be of assistance with this it isn't available on sam yet.
Click to expand...
Click to collapse
Keep checking the samfirm tool, it knows it's ready and displays G930PVPS4APJ2 but with binary error, which usually means soon, just need to check each day
*Detection* said:
Keep checking the samfirm tool, it knows it's ready and displays G930PVPS4APJ2 but with binary error, which usually means soon, just need to check each day
Click to expand...
Click to collapse
Could you link me to where its displayed?
Bnapi92 said:
Could you link me to where its displayed?
Click to expand...
Click to collapse
Looks like it's live on the servers today, go get it
Set up SamFirm like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Detection* said:
Looks like it's live on the servers today, go get it
Set up SamFirm like this
Click to expand...
Click to collapse
I love you, Super thanks!

Help plz!!! Only Jio Sim working!!

i am from india....i have OPO(Rooted+MultiRom) from jan 2014...no problem so far..
last monday i got 3 Jio sim card.
for me (OPO) , my bro (Brand New Redmi 3s prime) ,my friend(YU Yureka)
they have given 2 sim without Barcode (bcz...both of our generated Barcode was expired..)
we inserted sim in primary slot and
after One hour all three sim activated and getting signal nicely.
but now..(all three phone have same problem)
when we have tried to insert other operator sim in this particular slot , it shows "No Service" and getting error like "there is a error in searching network"
i tried my best to resolve issue myself but no luck.
i tried flashing different Roms(LP/MM/Naugat), Different Modem and tried IMEI changer app too but no luck
i contacted local Jio center but they says "issue is in your end...claim on your phone's company"
i called Jio customer care they said "after 90 days your phone's slot will be automatically unlocked"
i googled alot on net but many blog admin says it is rumors & and fake but we are suffering from such a serious issue in real...and if somebody want to help i can upload video of this issue.
so My question is.... Is Jio is blocking phone from using other sim??
if yes..then why and how to overcome this issue??
can anybody make patch/mod or xposed module to get over this issue??
any Help will be appreciated.. _/\_
*sorry for my bad English*
Update: Nov/26/2016
Solution..(what i did..)
-flash Resurrection Remix Rom 5.7.4 Last build
(check if ur current Rom have "EURO BAND" Option)
-After boot Dial *#*#4636#*#*
>Phone information >click on top three dot menu > select radio band > EURO BAND
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Reboot your phone
No such thing ever reported by anyone, my friend is using in Yureka with no problem. Your phone cannot be locked with just a SIM though. Flash stock and then type *#*#4636#*#* in your phone and try selecting some different radio bands, UK band works fine as reported by some users.
Try switching slots in your friends phone and the bands ofcourse.
Hope it brings helped. Thanks
PS : Answer typed when waiting in ATM queue
shubhaemk said:
No such thing ever reported by anyone, my friend is using in Yureka with no problem. Your phone cannot be locked with just a SIM though. Flash stock and then type *#*#4636#*#* in your phone and try selecting some different radio bands, UK band works fine as reported by some users.
Try switching slots in your friends phone and the bands ofcourse.
Hope it brings helped. Thanks
PS : Answer typed when waiting in ATM queue
Click to expand...
Click to collapse
See this SS....it is taken right now from my OPO running Latest Nitrogen OS but it still showing LYF device. ?
(Bhai GOD ji dikhte nhi....iska mean ye b to nhi ki wo hai hi nhi)
Never faced such issue :/
Try clean flashing through fastboot wiping everything.
Good luck!
Hkpatel111 said:
i am from india....i have OPO(Rooted+MultiRom) from jan 2014...no problem so far..
last monday i got 3 Jio sim card.
for me (OPO) , my bro (Brand New Redmi 3s prime) ,my friend(YU Yureka)
they have given 2 sim without Barcode (bcz...both of our generated Barcode was expired..)
we inserted sim in primary slot and
after One hour all three sim activated and getting signal nicely.
but now..(all three phone have same problem)
when we have tried to insert other operator sim in this particular slot , it shows "No Service" and getting error like "there is a error in searching network"
i tried my best to resolve issue myself but no luck.
i tried flashing different Roms(LP/MM/Naugat), Different Modem and tried IMEI changer app too but no luck
i contacted local Jio center but they says "issue is in your end...claim on your phone's company"
i called Jio customer care they said "after 90 days your phone's slot will be automatically unlocked"
i googled alot on net but many blog admin says it is rumors & and fake but we are suffering from such a serious issue in real...and if somebody want to help i can upload video of this issue.
so My question is.... Is Jio is blocking phone from using other sim??
if yes..then why and how to overcome this issue??
can anybody make patch/mod or xposed module to get over this issue??
any Help will be appreciated.. _/\_
*sorry for my bad English*
Click to expand...
Click to collapse
try creating a new APN for the respective sim operator, because when i got my jio it didnt have signal even after activation, creating an APN resolved it, maybe this method will work for other sim operator also.
Hkpatel111 said:
See this SS....it is taken right now from my OPO running Latest Nitrogen OS but it still showing LYF device.
(Bhai GOD ji dikhte nhi....iska mean ye b to nhi ki wo hai hi nhi)
Click to expand...
Click to collapse
Just do a clean format with other sim injected. Or just continue to use jio.
Try flashing cm-firmware /modem with the other sim injected.
baconxda said:
try creating a new APN for the respective sim operator, because when i got my jio it didnt have signal even after activation, creating an APN resolved it, maybe this method will work for other sim operator also.
Click to expand...
Click to collapse
Try this... I'm sure this will work.
baconxda said:
try creating a new APN for the respective sim operator, because when i got my jio it didnt have signal even after activation, creating an APN resolved it, maybe this method will work for other sim operator also.
Click to expand...
Click to collapse
i already stated in OP that i tried my best to resolve issue by change/reset network settings, clean flashed different Roms with different android version, changing phone identification by Phone faker and imei change....but no luck?
shubhaemk said:
Just do a clean format with other sim injected. Or just continue to use jio.
Click to expand...
Click to collapse
yeah sure.. but problem is in my home town jio network is not available... otherwise its worthy to stay with jio....
Hkpatel111 said:
i am from india....i have OPO(Rooted+MultiRom) from jan 2014...no problem so far..
last monday i got 3 Jio sim card.
for me (OPO) , my bro (Brand New Redmi 3s prime) ,my friend(YU Yureka)
they have given 2 sim without Barcode (bcz...both of our generated Barcode was expired..)
we inserted sim in primary slot and
after One hour all three sim activated and getting signal nicely.
but now..(all three phone have same problem)
when we have tried to insert other operator sim in this particular slot , it shows "No Service" and getting error like "there is a error in searching network"
i tried my best to resolve issue myself but no luck.
i tried flashing different Roms(LP/MM/Naugat), Different Modem and tried IMEI changer app too but no luck
i contacted local Jio center but they says "issue is in your end...claim on your phone's company"
i called Jio customer care they said "after 90 days your phone's slot will be automatically unlocked"
i googled alot on net but many blog admin says it is rumors & and fake but we are suffering from such a serious issue in real...and if somebody want to help i can upload video of this issue.
so My question is.... Is Jio is blocking phone from using other sim??
if yes..then why and how to overcome this issue??
can anybody make patch/mod or xposed module to get over this issue??
any Help will be appreciated.. _/\_
*sorry for my bad English*
Click to expand...
Click to collapse
I am going to give you a solution but i dont know if its going to work or not and i am clear here with I AM NOT RESPONSIBLE IF YOU END UP WITH A DED PHONE.
May be your mobile phone got changed its IMEI number with lyf handset by mistake or may have done it ( i dont know that).
Just try to enter your IMEI again in your device which need root for the procedure. There are plenty of tutorials and videos available over internet. So do it on your own risk and may be it will work.
kapilkhanule said:
I am going to give you a solution but i dont know if its going to work or not and i am clear here with I AM NOT RESPONSIBLE IF YOU END UP WITH A DED PHONE.
May be your mobile phone got changed its IMEI number with lyf handset by mistake or may have done it ( i dont know that).
Just try to enter your IMEI again in your device which need root for the procedure. There are plenty of tutorials and videos available over internet. So do it on your own risk and may be it will work.
Click to expand...
Click to collapse
He already said he tried changing imei :/
Mr.Ak said:
He already said he tried changing imei :/
Click to expand...
Click to collapse
Yeah i missed that!!
I had problem with gps on my OPO n i tried many roms but none of them worked and at last i installed official firmware 22R cyanogen os and then updated till marshmallow and my problem vanished. May be this will help.
kapilkhanule said:
Yeah i missed that!!
I had problem with gps on my OPO n i tried many roms but none of them worked and at last i installed official firmware 22R cyanogen os and then updated till marshmallow and my problem vanished. May be this will help.
Click to expand...
Click to collapse
I also told him to clean flash using fastboot mode.
Mr.Ak said:
I also told him to clean flash using fastboot mode.
Click to expand...
Click to collapse
My problem vanish only when i flashed cyanogen os very first version released for OPO and i think thats 22R
kapilkhanule said:
My problem vanish only when i flashed cyanogen os very first version released for OPO and i think thats 22R
Click to expand...
Click to collapse
Hmm
Mr.Ak said:
Hmm
Click to expand...
Click to collapse
My volte not working and I am unable to make calls from this device. Help me...!
[email protected] said:
My volte not working and I am unable to make calls from this device. Help me...!
Click to expand...
Click to collapse
Download Jio4gvoice from Playstore and enjoy...
Hkpatel111 said:
Download Jio4gvoice from Playstore and enjoy...
Click to expand...
Click to collapse
Omg.
Restoring EFS or old ROM backup will do the trick....I faces same issue and bingo.
EFS?? isn't it bit risky??
btw... i dont have any backup for EFS?
Hkpatel111 said:
EFS?? isn't it bit risky??
btw... i dont have any backup for EFS��
Click to expand...
Click to collapse
You should have taken one.

P20 Pro GPU Turbo update - VoLTE for all supported carriers

What I did?
1. Unlocked bootloader
2. Installed TWRP
3. Installed Magisk using TWRP
4. Using ES explorer edited vendor/build.config to enable VOLTE for Airtel
5. Using Settings Editor app enabled 4G only mode.
6. Hide magisk for bank apps.
7. Using HuRUpdater method updated to latest firmware with GPU turbo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hi,
where did you get last firmware, funkyhuawei ?? i see there is C782 available, are those fully compatible with debranded european devices ??
thanks
Dougi said:
hi,
where did you get last firmware, funkyhuawei ?? i see there is C782 available, are those fully compatible with debranded european devices ??
thanks
Click to expand...
Click to collapse
150 fw was released for 636 for more than a week already.
152 was just released for 432 recently.
Hey, thanks for quick reply, can you hep me with something, don't want to brick my device.
i'm on huawei P20 PRO, bought it unbranded, i'm in France, i unlocked the bootloader and rooted the stock ROM ( magisk ) with custom TWRP , did not do anything else at this day. ( pic attched )
i'm on 131C432, i want to manually update the update to "152"C432 with GPU turbo ( pic attached from app Huawei Firmware Finder ), i saw full firmaware was available ( see pic attached )
My question is, can update with HuRUpdater method following the steps from the HuRUpdater Thread, without debranding, rebranding etc......... it won't relock my bootloader right , i'll just place his recovery into .zip to keep custom TWRP, flash full 152C432, then root.
thanks for lighting me the situation i'm into
Yes you can flash it via hurupdater no need to relock BL or rebrand or rebrand. If you want to keep twrp put the twrp.img (renamed to recovery.img) in the same folder with the fw and hurupdater.zip
hi there, can you elaborate on this?
4. Using ES explorer edited vendor/build.config to enable VOLTE for Airtel
5. Using Settings Editor app enabled 4G only mode.
will this work on other networks outside India? I´m in Vodafone Portugal, and all set with my sim but there is no way to get volte to work.
kinder__bueno said:
hi there, can you elaborate on this?
4. Using ES explorer edited vendor/build.config to enable VOLTE for Airtel
5. Using Settings Editor app enabled 4G only mode.
will this work on other networks outside India? I´m in Vodafone Portugal, and all set with my sim but there is no way to get volte to work.
Click to expand...
Click to collapse
If you have rooted your phone successfully, Install ES explorer, In the menu allow root explorer.
THEN
GO TO DEVICE, SELECT SYSTEM-> VENDOR-> BUILD.PROP
IN BULID.PROP YOU FIND THE LINE COMMAND
ro.config.hw_volte_on=true
ADD THIS COMMAND LINE AFTER THE LINE
ro.config.hw_volte_dyn=false
it should be like this ro.config.hw_volte_on=true
ro.config.hw_volte_dyn=false
AFTER ADDING SAVE AND REBOOT YOUR PHONE.
Dougi said:
hi,
where did you get last firmware, funkyhuawei ?? i see there is C782 available, are those fully compatible with debranded european devices ??
thanks
Click to expand...
Click to collapse
I got the firmware from here.
http://pro-teammt.ru/firmware-database/?firmware_model=Clt-l29c636&firmware_page=0
By pressing filelist you will see three links, Download all and rename as per HuRUpdater method requirements and you are ready to go.
manovee said:
If you have rooted your phone successfully, Install ES explorer, In the menu allow root explorer.
THEN
GO TO DEVICE, SELECT SYSTEM-> VENDOR-> BUILD.PROP
IN BULID.PROP YOU FIND THE LINE COMMAND
ro.config.hw_volte_on=true
ADD THIS COMMAND LINE AFTER THE LINE
ro.config.hw_volte_dyn=false
it should be like this ro.config.hw_volte_on=true
ro.config.hw_volte_dyn=false
AFTER ADDING SAVE AND REBOOT YOUR PHONE.
Click to expand...
Click to collapse
I´ve done that on an previous firmware version and it didn´t work. No VoLTE, not even the option to change on the call settings. Are you sure it´s working on all suported carriers?
Anyone else outside India tested this?
kinder__bueno said:
I´ve done that on an previous firmware version and it didn´t work. No VoLTE, not even the option to change on the call settings. Are you sure it´s working on all suported carriers?
Anyone else outside India tested this?
Click to expand...
Click to collapse
It wont work that simple indeed
Been doing that trick since i bought the phone. And, no, my volte is not working
Smartfren telecom, Indonesia
otonieru said:
It wont work that simple indeed
Been doing that trick since i bought the phone. And, no, my volte is not working
Smartfren telecom, Indonesia
Click to expand...
Click to collapse
Technically If your bands are built into the modem and restricted by region model it can be enables. For me, I have bought a Singapore Model and in India the device is not showing enabling VoLTE for carrier Airtel although it shows for a 4G only carrier JIO. I used this mod to get VoLTE on Airtel too.
So your issue might be the LTE band used for VoLTE itself not supported by the modem.
manovee said:
I got the firmware from here.
http://pro-teammt.ru/firmware-database/?firmware_model=Clt-l29c636&firmware_page=0
By pressing filelist you will see three links, Download all and rename as per HuRUpdater method requirements and you are ready to go.
Click to expand...
Click to collapse
Will work for me, my phone is from Hong Kong?
gd6noob said:
Will work for me, my phone is from Hong Kong?
Click to expand...
Click to collapse
Use current version to search in the website.. You can find yours at about screen. Mine is Clt-l29c636. you can use your model to find your firmware
manovee said:
Technically If your bands are built into the modem and restricted by region model it can be enables. For me, I have bought a Singapore Model and in India the device is not showing enabling VoLTE for carrier Airtel although it shows for a 4G only carrier JIO. I used this mod to get VoLTE on Airtel too.
So your issue might be the LTE band used for VoLTE itself not supported by the modem.
Click to expand...
Click to collapse
thing is,
my carrier band is exactly the same as JIO
so it definitely not about the band
do you set manual APN for your VoLTE btw ?
i tried setting up IMS apn, but everytime i save it, it disappear from APN list
otonieru said:
thing is,
my carrier band is exactly the same as JIO
so it definitely not about the band
do you set manual APN for your VoLTE btw ?
i tried setting up IMS apn, but everytime i save it, it disappear from APN list
Click to expand...
Click to collapse
I havent set Manual APN I left whatever carrier set. Giving false to the volte_dyn setting will give you an option to enable volte in network settings. Thats what I did.
Above that I am unsure what is happening in your part of the region.

Question Oneplus 9 T mobile running c.6x firmware dual sim bug solution finding

I got my tmo converted to eu running c.47 no dual sim bug after update to c.6x get dual sim bug and mobile data wont work unless magisk module same with global firmware or indian same problem after update to c.6x there is dual sim bug no mobile data work everything else work fine can anyone help me with problem without root
What you are asking can only be fixed oneplus. Another way is like you are asking someone to help fix your car without opening the hood.
MrSteelX said:
What you are asking can only be fixed oneplus. Another way is like you are asking someone to help fix your car without opening the hood.
Click to expand...
Click to collapse
Its not only my problem its a common problem whoever converts op9 tmo to global got hard bricked and after op9 pro india msm have this problem
rizzmughal said:
Its not only my problem its a common problem whoever converts op9 tmo to global got hard bricked and after op9 pro india msm have this problem
Click to expand...
Click to collapse
If you root problem can be fixed in 30 seconds
MrSteelX said:
If you root problem can be fixed in 30 seconds
Click to expand...
Click to collapse
Thats the problem dont want to root cant use couple of apps after that
rizzmughal said:
Thats the problem dont want to root cant use couple of apps after that
Click to expand...
Click to collapse
Out of curiosity why are you converting to global if you don't intend to root it?
Kievanightwing said:
Out of curiosity why are you converting to global if you don't intend to root it?
Click to expand...
Click to collapse
It aint necessary to root to stay on global and get updates i have used op8 tmo before converted to global used to update everytime was no issue at all
MrSteelX said:
If you root problem can be fixed in 30 seconds
Click to expand...
Click to collapse
After tmo official a12 ota update it should be easy to fix this issue i used the tmo 12 c.20 too but felt a few problems in that touch response was bad then global and also phone heats and lags in games
rizzmughal said:
It aint necessary to root to stay on global and get updates i have used op8 tmo before converted to global used to update everytime was no issue at all
Click to expand...
Click to collapse
Ah, alright then.
You'll need to use this: https://forum.xda-developers.com/t/...-for-indian-variant-flashing-as-well.4454357/
to get your phone back to the TMO version because the the Indian version not only changes certain hidden settings but also runs on a different SOC (870 for India vs 888 for TMO) which are probably contributing to your issue.
Kievanightwing said:
Ah, alright then.
You'll need to use this: https://forum.xda-developers.com/t/...-for-indian-variant-flashing-as-well.4454357/
to get your phone back to the TMO version because the the Indian version not only changes certain hidden settings but also runs on a different SOC (870 for India vs 888 for TMO) which are probably contributing to your issue.
Click to expand...
Click to collapse
I have tried it always get param preload error
Kievanightwing said:
Ah, alright then.
You'll need to use this: https://forum.xda-developers.com/t/...-for-indian-variant-flashing-as-well.4454357/
to get your phone back to the TMO version because the the Indian version not only changes certain hidden settings but also runs on a different SOC (870 for India vs 888 for TMO) which are probably contributing to your issue.
Click to expand...
Click to collapse
I used tmo india msm from there after that conversion to global after c.6x update still the same problem even i have mam with that couple of times there should be someone who can use tmo c.20 ota to fix this dual sim bug data wont work issue
rizzmughal said:
I have tried it always get param preload error
Click to expand...
Click to collapse
Param preload error is a user input error.
Did you make sure the dropdown to the right of the Enum button has O2 selected?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you're still getting that error here are some other things you can try:
Kievanightwing said:
Param preload error is a user input error.
Did you make sure the dropdown to the right of the Enum button has O2 selected?
View attachment 5725635
If you're still getting that error here are some other things you can try:
Click to expand...
Click to collapse
Yes tried each n every way o2 india sha check uncheck lite firehorse check always get param preload error device does not match in that msm
rizzmughal said:
Yes tried each n every way o2 india sha check uncheck lite firehorse check always get param preload error device does not match in that msm
Click to expand...
Click to collapse
Alright, here is another MSM tool that's modified directly to force flash TMO on phones that think they're the India model. Give it a shot:
3.55 GB file on MEGA
mega.nz
Kievanightwing said:
Alright, here is another MSM tool that's modified directly to force flash TMO on phones that think they're the India model. Give it a shot:
3.55 GB file on MEGA
mega.nz
Click to expand...
Click to collapse
I have flashed this one on me after that converted to global with fastboot enhance i still get this no data issue after c.6x update
As u can see i m on c.47 eu firmware same goes with c.48 global data is working perfectly no bug after i update to c.6x my data wont work there sim 2 in sim menu question is what is in c 6x updates which is not in c.48 that makes dual sim bug
rizzmughal said:
I have flashed this one on me after that converted to global with fastboot enhance i still get this no data issue after c.6x update
Click to expand...
Click to collapse
rizzmughal said:
As u can see i m on c.47 eu firmware same goes with c.48 global data is working perfectly no bug after i update to c.6x my data wont work there sim 2 in sim menu question is what is in c 6x updates which is not in c.48 that makes dual sim bug
Click to expand...
Click to collapse
Oh shoot, I was under the impression you couldn't get back to a working version after running into the bug. My bad. Unfortunately fixing the mobile data on c.6x is outside of my wheelhouse. I think only Oneplus can fix that issue on unrooted devices. Best of luck to you.
really dumb test. after updating to c6x with the sim bug, have you tried pulling out sim card and putting it back in?
MrSteelX said:
really dumb test. after updating to c6x with the sim bug, have you tried pulling out sim card and putting it back in?
Click to expand...
Click to collapse
Yea did that but nothing works
Weird I have a TMO OnePlus 9 I converted yesterday that only has no sim after reboot but after a little bit maybe like a minute or two I have data. I'm rooted but I haven't used the Dual Sim Module at all. I'm also on OOS13 but on the update before this it was working still

Categories

Resources