Hello,
I have a Huawei y635-l03 with Qualcomm snapdragon 410 8916 processor.
I would like to know how to put this phone in diag mode, I google and just find some secrets codes but those dont work on my phone, also I found how to put in EDL mode with adb command.
"adb reboot edl"
but it shows 9008 mode in device manager of my computer, but the 9006 diag port it is not present.
Would you please help me?
Regards
Marcelofi
Related
Hello,
I have a Huawei y635-l03 With Qualcomm processor 410 8916, I would like to know how can I enter to the diagnostic port 9006.
I search some codes but not working in my phone.
I try to use the adb shell also but it does not work too,
I was only able to enter edl QDLoader 9008 mode.
But I need to enter diag mode mode 9006.
please help me.
marcelofi said:
Hello,
I have a Huawei y635-l03 With Qualcomm processor 410 8916, I would like to know how can I enter to the diagnostic port 9006.
I search some codes but not working in my phone.
I try to use the adb shell also but it does not work too,
I was only able to enter edl QDLoader 9008 mode.
But I need to enter diag mode mode 9006.
please help me.
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
Please consider asking your questions here:
http://forum.xda-developers.com/t/huawei-y635
That is where discussion about your device is located.
Good luck!
hi everybody, I just try to repair the WiFI fix in my Zenfone V520KL, using the method described by the partner IDLeon, in the first way to put the phone in EDL mode, it indicates the following
Short guide.
1. You need be in EDL mode with installed drivers (Qualcomm HS-USB QDloader 9008).
I know 2 ways to do it.
a) Flash V520KL_all_WW_eng_T3.3.15 by AFT and reboot to EDL by adb command (adb reboot edl)
or
b)Use EDL cable.
I try to flash this archibe with AFT but the program tells me to set FRP Account, now that's? and where you get that key?
please help me, I don´t find nothing about that
Thank in advance
Dear Nubia X specialists,
i need some help with my bricked Nubia X. After reading all threads here, I didn't found the right solution for my problem. After updating the phone something happend with the Nubia X and now it hangs on FastBoot Mode after Power on. The Nubia goes always in the bootloop mode. It's not possible to "reboot to recovery mode", also not possible "to reboot to emergency recovery mode". The only mode which is possible is to boot in to "edload".
It's not possible to enable the USB debugging mode anymore, because the phone is in bootloop.
I installed the Qualcomm HS-USB QDLoader 9008 Driver and Windows finds the phone as a Qualcomm HS-USB QDLoader 9008, not as a normal Android Phone.
I tried also the the Nubia Emergency tool V.1.1.6, but the Nubia X isn't supported. It's also not possible to acces the Nubia X with the minimal ADB and Fastboot because the USB debugging mode is disabled and the ADB can't find any device.
So I need help, because it's totally bricked.
okay i know a fix , to boot up
follow the guide from here: https://forum.xda-developers.com/nubia-x/how-to/twrp-magisk-debloated-gapps-custom-rom-t3958592
install via fastboot this rooted version and you will boot up
Hi Everyone,
I tried to flash a custom rom on my ysl but it wasn't its rom (didn't know) so it's brick
nothing work in the phone but when i connect it into my pc it appear in device manger in port section under name (i can't remember it) but after updating it with qualcom drivers it changed to Qualcomm HS-USB Diangnostics 900E
i tried to flash offical fastboot rom with mi flash but give me missmatching device and image and failed too in Qualcomm image flash tool then i update phone driver manually to Qualcomm HS-USB QDLoader 9008 and tried again in mi flash but it give me error massage immediately and in QIFT give me sahara error.
i searched a lot about it i found something like EDL MODE and EDL CABLE but i don't know anything about those stuff and found something about change emmc image and don't know something about it else, so is there anything i can do to unbrick my phone or it dead without another chance ?
Ahmed-PP said:
Hi Everyone,
I tried to flash a custom rom on my ysl but it wasn't its rom (didn't know) so it's brick
nothing work in the phone but when i connect it into my pc it appear in device manger in port section under name (i can't remember it) but after updating it with qualcom drivers it changed to Qualcomm HS-USB Diangnostics 900E
i tried to flash offical fastboot rom with mi flash but give me missmatching device and image and failed too in Qualcomm image flash tool then i update phone driver manually to Qualcomm HS-USB QDLoader 9008 and tried again in mi flash but it give me error massage immediately and in QIFT give me sahara error.
i searched a lot about it i found something like EDL MODE and EDL CABLE but i don't know anything about those stuff and found something about change emmc image and don't know something about it else, so is there anything i can do to unbrick my phone or it dead without another chance ?
Click to expand...
Click to collapse
If you got detected the device under Qualcomm HS-USB 9008, then your device entered to EDL mode. Check well, what the error was, pay attention to the connection, that device get attached permanently during the flashing session.
I'm in trouble trying to restoring original imei, My imei is 0000 now and i can't manage to fix.
I have tried a bunch of things, Got stuck trying to connect the phone in diag mode, so i can use qfil to rewrite.
Any help or easier method?
Thanks
Is your phone a US phone? or GSM? sm-S908 | U | F | B?
Where and from whom did you buy your phone? My thoughts are that someone pulled a fast one and that you might have been scammed..
Sm-s908e
lost imei after flashing rom
Did not made Qcn backup
Alright, check this post out...
also check out this video of a dude rebooting into EDL mode, which I believe is the mode of function that you're looking for.
This is the Youtube video.
Dial:
*#9900#
Choose Upload mode. I think it's different if your model is american. I'm about to try it out..
You will need the qualcomm 9008 drivers.
Yeah i saw that, but is not the same
"Diag Port [Qualcomm HS-USB Android Diag 901D ] and Qualcomm HS-USB QDLoader 9008 – both are separate things. Android Diag 901D is a diag port while the HS-USB QDLoader 9008 is an emergency download mode [known as EDL mode]."
How to Enable Or Disable Diag Mode on Qualcomm device using ADB [Works on Vivo, Xiaomi, Oppo and more]
Here is the guide on How to Enable Or Disable Diag Mode on Qualcomm device using ADB [Works on Vivo, Xiaomi, Oppo and more]. Read full detail
www.getdroidtips.com
But i think i gotta get a cable to try in Edl as i tryed all i have found
i'm trying to flash other rom's to search for any change
Appreciate your help.