Dear Nubia X specialists,
i need some help with my bricked Nubia X. After reading all threads here, I didn't found the right solution for my problem. After updating the phone something happend with the Nubia X and now it hangs on FastBoot Mode after Power on. The Nubia goes always in the bootloop mode. It's not possible to "reboot to recovery mode", also not possible "to reboot to emergency recovery mode". The only mode which is possible is to boot in to "edload".
It's not possible to enable the USB debugging mode anymore, because the phone is in bootloop.
I installed the Qualcomm HS-USB QDLoader 9008 Driver and Windows finds the phone as a Qualcomm HS-USB QDLoader 9008, not as a normal Android Phone.
I tried also the the Nubia Emergency tool V.1.1.6, but the Nubia X isn't supported. It's also not possible to acces the Nubia X with the minimal ADB and Fastboot because the USB debugging mode is disabled and the ADB can't find any device.
So I need help, because it's totally bricked.
okay i know a fix , to boot up
follow the guide from here: https://forum.xda-developers.com/nubia-x/how-to/twrp-magisk-debloated-gapps-custom-rom-t3958592
install via fastboot this rooted version and you will boot up
Related
[Q] Bricked. Erased/messed up bootloader. Win recognized as "HS-USB QDLoader 9008".
Hello.
Finally I hard bricked my Photon Q. I think I erased an unlocked bootloader. Right now phone cannot boot into fastboot mode. Power+Vol up, Power+Vol down held long do nothing. After connecting to Windows PC, phone is recognized as "HS-USB QDLoader 9008". I found drivers on the net. RSDlite recognizes device, but flashing fails with message that it cannot switch phone from download mode. I found QPST service software used to flash bootloader. Right now I think the problem is that I don't have proper bootloader images for Photon Q, and to be honest, I don't really know what options to use (the software seems quite complicated).
Has anyone encoutered (and solved) similar issues? Do you have any ideas, what to do? I tried some generic Qualcomm files, but couldn't flash them.
Anyone, please, help me, if you can.
Chris
I tried Flashing my acer liquid Z330 with a custom rom after installing TWRP the rom could not Flash in So i flashed it with another version of TWRP and I have done a missclick with it and downloaded one for Asus Not acer Now my phone dont even turn on , so to fix it i plugged it on the laptop and installed te qualcomm snapdragon drivers , My phone screen dont show anything he dont vibrate nothing just the charge led is On when i plug it , more than that when i plug it (after instaling drivers) Show me ''qualcomm hs-usb diagnostics 900E com10'' Instead of ''Qualcomm hs-usb QDloader 9008'' the phone has removable battery so i tried all te things i found on internet and XDA Forums I installed Qdloader one but no changes its always shown off By Diagnostics 900E one Then i can't flash it with QFIl I dont know what to do And Further more I can't turn it In Fastboot Mode or EDL One No changes are happening Its like a dead Phone
I'll apreciate Any help from You And sorry For my grammatical mistakes Im french
UP
UP
eyznec said:
I tried Flashing my acer liquid Z330 with a custom rom after installing TWRP the rom could not Flash in So i flashed it with another version of TWRP and I have done a missclick with it and downloaded one for Asus Not acer Now my phone dont even turn on , so to fix it i plugged it on the laptop and installed te qualcomm snapdragon drivers , My phone screen dont show anything he dont vibrate nothing just the charge led is On when i plug it , more than that when i plug it (after instaling drivers) Show me ''qualcomm hs-usb diagnostics 900E com10'' Instead of ''Qualcomm hs-usb QDloader 9008'' the phone has removable battery so i tried all te things i found on internet and XDA Forums I installed Qdloader one but no changes its always shown off By Diagnostics 900E one Then i can't flash it with QFIl I dont know what to do And Further more I can't turn it In Fastboot Mode or EDL One No changes are happening Its like a dead Phone
I'll apreciate Any help from You And sorry For my grammatical mistakes Im french
Click to expand...
Click to collapse
Hello and welcome to XDA-developers!
Since there is no information about harbricked Acer Z330 on XDA, I sugedt you put your question on Questions and Answers to see if any member has a solution for your problem.
hi guys
i have pixel 128gb g-2pw4200 and after reboot my device dont turn on and dont have any response
i dont have a recovery fastboot and ....
in my device manager detect as CPU (detect only as Qualcomm HS-USB QDLoader 9008)
how can i fix it?!?!
Thanks
when you hold down the vol-down and power, does it send you to the bootloader screen?.
Is your bootloader locked?
Did you do anything non-standard to it (like load a ROM, kernel, etc)?
Looks like someone else had the same issue: https://forum.xda-developers.com/pixel-xl/help/help-pixel-xl-hs-usb-qdloader-9008-mode-t3574278
hi everybody, I just try to repair the WiFI fix in my Zenfone V520KL, using the method described by the partner IDLeon, in the first way to put the phone in EDL mode, it indicates the following
Short guide.
1. You need be in EDL mode with installed drivers (Qualcomm HS-USB QDloader 9008).
I know 2 ways to do it.
a) Flash V520KL_all_WW_eng_T3.3.15 by AFT and reboot to EDL by adb command (adb reboot edl)
or
b)Use EDL cable.
I try to flash this archibe with AFT but the program tells me to set FRP Account, now that's? and where you get that key?
please help me, I donĀ“t find nothing about that
Thank in advance
Hi Everyone,
I tried to flash a custom rom on my ysl but it wasn't its rom (didn't know) so it's brick
nothing work in the phone but when i connect it into my pc it appear in device manger in port section under name (i can't remember it) but after updating it with qualcom drivers it changed to Qualcomm HS-USB Diangnostics 900E
i tried to flash offical fastboot rom with mi flash but give me missmatching device and image and failed too in Qualcomm image flash tool then i update phone driver manually to Qualcomm HS-USB QDLoader 9008 and tried again in mi flash but it give me error massage immediately and in QIFT give me sahara error.
i searched a lot about it i found something like EDL MODE and EDL CABLE but i don't know anything about those stuff and found something about change emmc image and don't know something about it else, so is there anything i can do to unbrick my phone or it dead without another chance ?
Ahmed-PP said:
Hi Everyone,
I tried to flash a custom rom on my ysl but it wasn't its rom (didn't know) so it's brick
nothing work in the phone but when i connect it into my pc it appear in device manger in port section under name (i can't remember it) but after updating it with qualcom drivers it changed to Qualcomm HS-USB Diangnostics 900E
i tried to flash offical fastboot rom with mi flash but give me missmatching device and image and failed too in Qualcomm image flash tool then i update phone driver manually to Qualcomm HS-USB QDLoader 9008 and tried again in mi flash but it give me error massage immediately and in QIFT give me sahara error.
i searched a lot about it i found something like EDL MODE and EDL CABLE but i don't know anything about those stuff and found something about change emmc image and don't know something about it else, so is there anything i can do to unbrick my phone or it dead without another chance ?
Click to expand...
Click to collapse
If you got detected the device under Qualcomm HS-USB 9008, then your device entered to EDL mode. Check well, what the error was, pay attention to the connection, that device get attached permanently during the flashing session.