My MTK phone has completely dead - General Questions and Answers

Hi,
I have a problem with my phone {Archos 50b neon},
the phone got in dead boot problem
after googling i found that i have to flash "preloader" file first then flash the other files
i tried this ,but the phone is dead too.
i tried everything with sp flashtool but nothing happened
my preloader file is called : preloader_wt98601.bin
what do i have to do to get my phone out from dead boot ?
please, anybody help me !

Related

[Q] Feiteng H7100 bricked MT6577 unbrick?

Hi, I have a big problem with my new Phone Feiteng H7100! After I flashed the ROM (from needrom), nothing happens on the phone! Everything went as described until the green circle. Nothing now … when connected to the PC appears a USB / network device name: Alcatel Single RNDIS interface, nothing more happens.
Can someone help me here? Please
jemmars
Hello everyone,
can anyone help me here really? I've also, quite diligently search through the forums for possible solutions, but I have not found anything. Please, please help me with my phone ... where I still have birthday ... your help I would be today's greatest gift!
Did you tried to reflash with another ROM?
Maybe this will help you: http://forum.xda-developers.com/showthread.php?t=2186116
Please post your experience.
hi, can anyone help me, i have a feiteng h7100, totally bricked, not turn it on, the computer dont recognize, is a dead phone, i flash it with sp flashtool first time says ok, but no turn it on, so i flash it again, in the middle of flashing says error and the cpu dont recognize any more my phone, any ideas..
never flash DSP_BL and preloader. as long as the device is recognized on your PC, its not "dead" othewise you can try the "testpoint" methode, but not all motherboards have one.

[Completed] [Q] Bricked device( i suppose)

Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number
Issue resolved, thread closed, thanks.

[Completed] THL 4000 Bricked?

Hello....Few days ago my phone asked for an update without wire....i downloaded it and asked for install so i did...after restarting it stoped work...was the dead android on display...so today i downloaded the sp flash tool and i got a recovery file for my phone and the scatter file...and i tryed to install. Turned few colors on and at the finish sayed something about rom but i didnt read just pressed the ok...then didn't turned on anymore...when i connect it via usb...pop's the sound on and for 1 sec shows up in device mananger and then get off continuously...Can i do something to It? can i bring it back to life?
Hi,
I can't find a relevant thread for your device and issue, but you could ask for help here...http://forum.xda-developers.com/showthread.php?t=2259645
Good luck!

i need dump.img for H900 to make a bootable sd card . stuck at qdloader 9008 . plz

my H900 is flashed with a wrong rom . now its bricked blank screen , no lights on windows it shows qdloader 9008 without battery , with battery its an unknown device , i found here that making a bootabe sd card can allow me to inter download mode in order to flash it , but i cant find the dump img of the H900 , plz anyone who can send me a link of it or extract it from its phone i will appreciate it ,thank you
I'm not sure about making an img, but here are a couple of H900 files:
KDZ:
https://forum.xda-developers.com/att-lg-v10/general/h90021w00-extracted-t3496399
TOT/KDZ:
https://forum.xda-developers.com/att-lg-v10/general/h90020j-tot-t3493329
thank you sir for the roms . i will keep looking for a way to extract the img from the rom . thank you for your will to help .
dust2dusts said:
my H900 is flashed with a wrong rom . now its bricked blank screen , no lights on windows it shows qdloader 9008 without battery , with battery its an unknown device , i found here that making a bootabe sd card can allow me to inter download mode in order to flash it , but i cant find the dump img of the H900 , plz anyone who can send me a link of it or extract it from its phone i will appreciate it ,thank you
Click to expand...
Click to collapse
You are Correct my friend .. i have seen people doing this way .
same problem here
what's happend
dust2dusts said:
my H900 is flashed with a wrong rom . now its bricked blank screen , no lights on windows it shows qdloader 9008 without battery , with battery its an unknown device , i found here that making a bootabe sd card can allow me to inter download mode in order to flash it , but i cant find the dump img of the H900 , plz anyone who can send me a link of it or extract it from its phone i will appreciate it ,thank you
Click to expand...
Click to collapse
did you flash VS990 Rom? or what ?? becasue i'm stuck with 90021v rom and i have issues but when i unscrew my phone i found mother model VS990 .. should i flash vs990 KDZ?

[Q] Tecno L8 Lite Dead phone

I already installed the mtk driver and the sp flash tool and i also have the stock rom of my phone but the problem is, my pc can't detect my dead phone. I already searched for solution here and youtube and followed the procedures but nothing happened. Same problem. Hope you can help me guys. Thanks!
pls my tecno phone i format it with sp flash and is not coming up again pls i need your help

Categories

Resources