[Completed] How to unbrick phone (soft brick) mtk6752? (NO RECOVERY) - XDA Assist

Was trying to flash a custom recovery (cmw) using mtk dd tool, adb as I have seen from the tutorial. I followed the instructions but when my device restarted it goes into bootloop. Pressed the power button+volume up it takes me to the screen where i will choose recovery, fast boot or normal. When I selected the recovery it doesn't into it and just power offs instead same as to fastboot. Normal reboot just takes me to bootloop again.
Device: Meetu m11(I guess) but when i bought it its Lenovo
Aliyun OS
MTK6752
Android 4.4
How will I get past the bootloop? Also I can't find any stock rrecovery . I can't flash anything. Hope you can help me.
Thanks!

XDA Visitor said:
Was trying to flash a custom recovery (cmw) using mtk dd tool, adb as I have seen from the tutorial. I followed the instructions but when my device restarted it goes into bootloop. Pressed the power button+volume up it takes me to the screen where i will choose recovery, fast boot or normal. When I selected the recovery it doesn't into it and just power offs instead same as to fastboot. Normal reboot just takes me to bootloop again.
Device: Meetu m11(I guess) but when i bought it its Lenovo
Aliyun OS
MTK6752
Android 4.4
How will I get past the bootloop? Also I can't find any stock rrecovery . I can't flash anything. Hope you can help me.
Thanks!
Click to expand...
Click to collapse
Hello,
Please register for XDA account to post and reply in the forums.
Also, you may try posting your query here Android Q&A Forum with all relevant details, the experts there maybe able to assist you.
Regards
Vatsal,
Forum Moderator.

Related

[Completed] [Q] Recovery problem [Important]

I recently tried to upload a recovery but the attempt was a problem. The phone starts up, it shows the logo of tracer and reboots the phone. I can enter into fastboot and upload Tracer software but i have problem. fastboot flash system, chache, boot, userdata was succesful but when I want to flash recovery on the phone displays the error "partition recovery not use flash". What can I do? This is very important. My model phone is Tracer oxygen gs3 Plz help me, thanks!
Hi,
I see you already asked this in the Android Q&A section, which is where I would tell you to ask also. So there's nothing more we can do for you here. We only help navigate the site, we don't do support here.
Be sure the recovery is for your exact device, or it won't work and could cause issues. I see nothing relevant on XDA about recovery for your device.
Good luck!

[Completed] iberry Auxus Nuclea N2 stuck at boot (MTK5692)

Hi,
I have rooted my device using framaroot and the using Mobile uncle too in updated the Recovery to Carliv and installed Mt657xRepartition_EN and changed partition to 3 GB. and when I tired booting into recovery mode its stuck at boot logo and not going into recovery. I see three option when i press volup + power.
recovery, fastboot and normal. When I click recovery I will get my boot logo back. When I select Fastboot nothing happens. If I select normal. its again boot logo.
I have taken NVRAM, IMEI backups. Now I am stuck as I cannot boot into recovery. Can anyone help me get thru this problem?
XDA Visitor said:
Hi,
I have rooted my device using framaroot and the using Mobile uncle too in updated the Recovery to Carliv and installed Mt657xRepartition_EN and changed partition to 3 GB. and when I tired booting into recovery mode its stuck at boot logo and not going into recovery. I see three option when i press volup + power.
recovery, fastboot and normal. When I click recovery I will get my boot logo back. When I select Fastboot nothing happens. If I select normal. its again boot logo.
I have taken NVRAM, IMEI backups. Now I am stuck as I cannot boot into recovery. Can anyone help me get thru this problem?
Click to expand...
Click to collapse
Ok ... seems that you bricked your device by repartitioning it.
Changing the partitions is always very risky.
I recommend to read this thread: [AUXUS Nuclea N2] All Things Root Thread.
Maybe you can flash back a stock firmware on fastboot.
For further questions, please register on xda and ask in the Q&A thread about your device.
Good luck !
Thread closed. Thanks you!

[Completed] CM Fuze Q390 Bricked. Need Stock ROM To Flash

I know that my phone has no android OS because this happens before, It wont boot up and you need to enter recovery mode and when I chose reboot it says that it has no android OS and when you reboot it it was stuck in boot image. I need to install a new rom that has a android OS. And It Works.
One time I Factory Reset my phone on settings . Usually it will enter in TWRP and make a reset BUT it was stuck on the logo of TWRP and cannot enter into recovery anymore. I remove the battery and try to power it on. It was stuck in boot image. I remember that this happens before so I try to enter recovery mode. But I was stuck again in the logo of TWRP. What should I do? Please help....
My TWRP recovery was from this http://forum.xda-developers.com/showthread.php?t=2660014
cedcose said:
I know that my phone has no android OS because this happens before, It wont boot up and you need to enter recovery mode and when I chose reboot it says that it has no android OS and when you reboot it it was stuck in boot image. I need to install a new rom that has a android OS. And It Works.
One time I Factory Reset my phone on settings . Usually it will enter in TWRP and make a reset BUT it was stuck on the logo of TWRP and cannot enter into recovery anymore. I remove the battery and try to power it on. It was stuck in boot image. I remember that this happens before so I try to enter recovery mode. But I was stuck again in the logo of TWRP. What should I do? Please help....
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for the Cherry Mobile Fuze Q390 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help where members familiar with your device might be able to advise you.
I also see a thread titled "All About Cherry Mobile Fuze (Q390)" at http://forum.xda-developers.com/showthread.php?t=2660014 that might be worth reading.
Good Luck!

[Completed] My New YU YUREKA PLUS on Android KIKAT (NOT Cyanogen) Is Trapped in bootloop !

IT stucked in bootloop while trying to install Trwp rom... I tried to recover it by loading it into fastboot mode nd some flash boot method but that was for cyanogen Os .. but now it is trapped into infinite BOOt logo .. I mean it it turns on and logo comes nd nothing else appears. .. please help me .. I bought it just today..
XDA Visitor said:
IT stucked in bootloop while trying to install Trwp rom... I tried to recover it by loading it into fastboot mode nd some flash boot method but that was for cyanogen Os .. but now it is trapped into infinite BOOt logo .. I mean it it turns on and logo comes nd nothing else appears. .. please help me .. I bought it just today..
Click to expand...
Click to collapse
Hello, and welcome to XDA!
If you can still get into fastboot, you should be able to flash back the stock images, even if they are not the original non-Cyanogen 4.4.4 images.
For the stock images themselves, please create an XDA account so you can post in other forums. From there, find out if the stock images (particularly stock recovery) are available by adding a post to this thread:
> YU Yureka > YU Yureka General > Yureka plus
You will probably also want to ask the method on how to go about flashing that stuff. e.g. to get recovery back, run the following fastboot command:
Code:
fastboot flash recovery path/to/stock-recovery.img
Hope this helps, and good luck!
I want help!
Ankitroshan said:
I want help!
Click to expand...
Click to collapse
Help is right around the corner. From my aspect, that is the best place to ask.
You can even copy and paste your original post from here, as it should be complete enough for the device experts there (except you may want to elaborate on what was done with "fastboot mode nd some flash boot method").
All the best.

[Completed] problem came on installing stock and custom recovery

I have Lenovo A6000 and I have installed stock recovery by minimal adb and fast boot software .
In the bootloader sceen I have successfull flashed stock recovery (not corrupted because installed it before and was working ) but while rebooting to recovery menu it stuck on boot loop,
then I have installed TWRP recovery image successfully by Minimal ADB fastboot, and same result came.
So I have decided to install stock rom by fastboot software from bootloader .
After wiping data by below command
fastboot -w
followed by
fastboot update <stock.zip>
An errom came and says no android-info.txt found.
What it is???
Please give us a way to install Stock ROM because no recovery is working.
Hi,
Thanks for using XDA assist.
I found a helpful thread that may help you solve your problem:
The Long Waiting Lollipop For Lenovo A6000 / Plus
If you follow the guide, you may be able to access your recovery.
Alternatively, you can post in the Android Q&A, Help & Troubleshooting forum as there is no dedicated thread for your device. Please note that in order to post, you will need to create a XDA account.
Good Luck! - gsstudios

Categories

Resources