Hi,
I have rooted my device using framaroot and the using Mobile uncle too in updated the Recovery to Carliv and installed Mt657xRepartition_EN and changed partition to 3 GB. and when I tired booting into recovery mode its stuck at boot logo and not going into recovery. I see three option when i press volup + power.
recovery, fastboot and normal. When I click recovery I will get my boot logo back. When I select Fastboot nothing happens. If I select normal. its again boot logo.
I have taken NVRAM, IMEI backups. Now I am stuck as I cannot boot into recovery. Can anyone help me get thru this problem?
XDA Visitor said:
Hi,
I have rooted my device using framaroot and the using Mobile uncle too in updated the Recovery to Carliv and installed Mt657xRepartition_EN and changed partition to 3 GB. and when I tired booting into recovery mode its stuck at boot logo and not going into recovery. I see three option when i press volup + power.
recovery, fastboot and normal. When I click recovery I will get my boot logo back. When I select Fastboot nothing happens. If I select normal. its again boot logo.
I have taken NVRAM, IMEI backups. Now I am stuck as I cannot boot into recovery. Can anyone help me get thru this problem?
Click to expand...
Click to collapse
Ok ... seems that you bricked your device by repartitioning it.
Changing the partitions is always very risky.
I recommend to read this thread: [AUXUS Nuclea N2] All Things Root Thread.
Maybe you can flash back a stock firmware on fastboot.
For further questions, please register on xda and ask in the Q&A thread about your device.
Good luck !
Thread closed. Thanks you!
Related
hello..i am using CYNUS T2 for 5 months now..jelybean...before few day i tried to downgrade to ICS because is faster and work very well with 2 sim..but something has gone wrong and my phone doesnt open...stuck at boot screen..i tried to enter factory or recovery mode with (power button + vol up+ vol down) but nothing happens... i try it several times...any solution dudes..thanks in advance.
First of all...you are in wrong section dude..you must have post this in Q&A section..
Now search in General section & flash stock jellybeen through sptools..as you are unable to go in recovery
Sent from my A250 LegoIceâ„¢_Turbo using XDA Premium 4 mobile app
@ Justmpm please move this thread
Use SP flash tools and reinstall recovery.
al13nas said:
hello..i am using CYNUS T2 for 5 months now..jelybean...before few day i tried to downgrade to ICS because is faster and work very well with 2 sim..but something has gone wrong and my phone doesnt open...stuck at boot screen..i tried to enter factory or recovery mode with (power button + vol up+ vol down) but nothing happens... i try it several times...any solution dudes..thanks in advance.
Click to expand...
Click to collapse
Use Flash Recovery tools and re install CWM recovery. If you are stuck at boot logo that is the only option. Type how to install CWM mode with SP Flash tools in google.com. For that you have to remove your battery And Flash CWM recovery.
Once the Recovery is open You can install any custom ROM==> Again "Google knows"
This gotta help you, So you gotta hit thanks.If not reply your problem
shreyasmakde said:
Use Flash Recovery tools and re install CWM recovery. If you are stuck at boot logo that is the only option. Type how to install CWM mode with SP Flash tools in google.com. For that you have to remove your battery And Flash CWM recovery.
Once the Recovery is open You can install any custom ROM==> Again "Google knows"
This gotta help you, So you gotta hit thanks.If not reply your problem
Click to expand...
Click to collapse
i open flashtool.. so i need to open a scatter file from original rom ... but flashtool (error : initialazing scatter file failed ..its illegal)
Hi guys
So, my frien'ds zte v970 stuck in boot loop. After some labs try to fix it - the phone when power on was stuck on ZTE logo.
So I took it and managed to flash the stock rom (downloaded from xda), then I flashed Bruno's CWM recovery and latest Rom (also from official XDA thread).
The device was all fine for a hour and a half but after my friend did a Reboot through the recovery the phone stuck again at bootloop. When I want to enter the recovery somehow the stock chinese recovery appered
How can this happen ?
IDK if it matters, but when the device wroked (after flashing..), if I'd press VOL UP + POWER I got to the CWMR, and by pressing VOL DW + POWER I got to other menu - something with tests, clear eMMc. Version..
Maybe I did something wrong during any flash procedure?
What do I need to do now?
Thank you for helping!
Stuck at start logo
I've tried to unify ram using instructions for mt6589 and my zte also stuck after rebooting. After I took out the battery I tried to flash with JB 4.1.1 ver 1.3 but nothing happened. Can anyone help me?
I'm using a lenovo s820, rooted, running stock rom and jb 4.2.1
I couldn't find any recovery like cwm or twrp for my phone and I ended up downloading a recovery that said it was a version of cwm for my phone from this app called mobileuncle mtk tools
The app flashed the recovery onto my phone and rebooted into recovery except that it didn't boot into recovery
Now it is stuck in a boot loop where it only shows the lenovo logo but does not boot
I've tried booting into recovery by holding "vol up+vol down+power" but it does the same thing
I tried booting into factory mode but it is in chinese and I cannot understand anything in it
I have a backup of my rom before flashing the recovery but it is stuck in the boot loop even after restoring the backup
I've also searched a lot and can't find a solution to my problem!
I've seen some solutions saying I should flash stock rom using flash tools but there's a big problem here. Flash Tools refuses to flash the stock rom onto my phone. I tried to do it while keeping the phone in meta mode but it wasn't happening.
I've attached the image of the factory mode menu
Please help asap! I can't use my phone at all and I'm panicking and I don't know what to do!!! :crying: :crying: :crying:
Update: I managed to restore clockworkmod recovery on my phone and I tried to restore the stock os from it but it says installation aborted and refuses to install the os :/
Look here:
http://forum.xda-developers.com/showthread.php?t=2576898
I know that my phone has no android OS because this happens before, It wont boot up and you need to enter recovery mode and when I chose reboot it says that it has no android OS and when you reboot it it was stuck in boot image. I need to install a new rom that has a android OS. And It Works.
One time I Factory Reset my phone on settings . Usually it will enter in TWRP and make a reset BUT it was stuck on the logo of TWRP and cannot enter into recovery anymore. I remove the battery and try to power it on. It was stuck in boot image. I remember that this happens before so I try to enter recovery mode. But I was stuck again in the logo of TWRP. What should I do? Please help....
My TWRP recovery was from this http://forum.xda-developers.com/showthread.php?t=2660014
cedcose said:
I know that my phone has no android OS because this happens before, It wont boot up and you need to enter recovery mode and when I chose reboot it says that it has no android OS and when you reboot it it was stuck in boot image. I need to install a new rom that has a android OS. And It Works.
One time I Factory Reset my phone on settings . Usually it will enter in TWRP and make a reset BUT it was stuck on the logo of TWRP and cannot enter into recovery anymore. I remove the battery and try to power it on. It was stuck in boot image. I remember that this happens before so I try to enter recovery mode. But I was stuck again in the logo of TWRP. What should I do? Please help....
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for the Cherry Mobile Fuze Q390 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help where members familiar with your device might be able to advise you.
I also see a thread titled "All About Cherry Mobile Fuze (Q390)" at http://forum.xda-developers.com/showthread.php?t=2660014 that might be worth reading.
Good Luck!
Was trying to flash a custom recovery (cmw) using mtk dd tool, adb as I have seen from the tutorial. I followed the instructions but when my device restarted it goes into bootloop. Pressed the power button+volume up it takes me to the screen where i will choose recovery, fast boot or normal. When I selected the recovery it doesn't into it and just power offs instead same as to fastboot. Normal reboot just takes me to bootloop again.
Device: Meetu m11(I guess) but when i bought it its Lenovo
Aliyun OS
MTK6752
Android 4.4
How will I get past the bootloop? Also I can't find any stock rrecovery . I can't flash anything. Hope you can help me.
Thanks!
XDA Visitor said:
Was trying to flash a custom recovery (cmw) using mtk dd tool, adb as I have seen from the tutorial. I followed the instructions but when my device restarted it goes into bootloop. Pressed the power button+volume up it takes me to the screen where i will choose recovery, fast boot or normal. When I selected the recovery it doesn't into it and just power offs instead same as to fastboot. Normal reboot just takes me to bootloop again.
Device: Meetu m11(I guess) but when i bought it its Lenovo
Aliyun OS
MTK6752
Android 4.4
How will I get past the bootloop? Also I can't find any stock rrecovery . I can't flash anything. Hope you can help me.
Thanks!
Click to expand...
Click to collapse
Hello,
Please register for XDA account to post and reply in the forums.
Also, you may try posting your query here Android Q&A Forum with all relevant details, the experts there maybe able to assist you.
Regards
Vatsal,
Forum Moderator.