Hi guys
So, my frien'ds zte v970 stuck in boot loop. After some labs try to fix it - the phone when power on was stuck on ZTE logo.
So I took it and managed to flash the stock rom (downloaded from xda), then I flashed Bruno's CWM recovery and latest Rom (also from official XDA thread).
The device was all fine for a hour and a half but after my friend did a Reboot through the recovery the phone stuck again at bootloop. When I want to enter the recovery somehow the stock chinese recovery appered
How can this happen ?
IDK if it matters, but when the device wroked (after flashing..), if I'd press VOL UP + POWER I got to the CWMR, and by pressing VOL DW + POWER I got to other menu - something with tests, clear eMMc. Version..
Maybe I did something wrong during any flash procedure?
What do I need to do now?
Thank you for helping!
Stuck at start logo
I've tried to unify ram using instructions for mt6589 and my zte also stuck after rebooting. After I took out the battery I tried to flash with JB 4.1.1 ver 1.3 but nothing happened. Can anyone help me?
Related
I'm using a lenovo s820, rooted, running stock rom and jb 4.2.1
I couldn't find any recovery like cwm or twrp for my phone and I ended up downloading a recovery that said it was a version of cwm for my phone from this app called mobileuncle mtk tools
The app flashed the recovery onto my phone and rebooted into recovery except that it didn't boot into recovery
Now it is stuck in a boot loop where it only shows the lenovo logo but does not boot
I've tried booting into recovery by holding "vol up+vol down+power" but it does the same thing
I tried booting into factory mode but it is in chinese and I cannot understand anything in it
I have a backup of my rom before flashing the recovery but it is stuck in the boot loop even after restoring the backup
I've also searched a lot and can't find a solution to my problem!
I've seen some solutions saying I should flash stock rom using flash tools but there's a big problem here. Flash Tools refuses to flash the stock rom onto my phone. I tried to do it while keeping the phone in meta mode but it wasn't happening.
I've attached the image of the factory mode menu
Please help asap! I can't use my phone at all and I'm panicking and I don't know what to do!!! :crying: :crying: :crying:
Update: I managed to restore clockworkmod recovery on my phone and I tried to restore the stock os from it but it says installation aborted and refuses to install the os :/
Look here:
http://forum.xda-developers.com/showthread.php?t=2576898
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Nikola99603 said:
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Click to expand...
Click to collapse
1st .
if you have computer use sp tool flashing ....you can flash CWM via SPtool which requires computer .....i think this will going to reset your recovery mode ....then you can flash rom in your mobile ..
2nd .
you can directly flash rom via sptool . there are so many tutorials available regarding a110 device on xda . only choose your device you will get all available contents regarding your device ..
I
Nikola99603 said:
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Click to expand...
Click to collapse
Help me same issue facing tried to reflash cwmr by sp flash tools then also not able to access recovery installed ib phoneix v4 working very well but need to update one patch.
Sent from my A110 using XDA Free mobile app
unable to boot in recovery mode in micromax a110
kindly check thread
http://forum.xda-developers.com/showthread.php?t=2201689&page=2
Hi,
I have rooted my device using framaroot and the using Mobile uncle too in updated the Recovery to Carliv and installed Mt657xRepartition_EN and changed partition to 3 GB. and when I tired booting into recovery mode its stuck at boot logo and not going into recovery. I see three option when i press volup + power.
recovery, fastboot and normal. When I click recovery I will get my boot logo back. When I select Fastboot nothing happens. If I select normal. its again boot logo.
I have taken NVRAM, IMEI backups. Now I am stuck as I cannot boot into recovery. Can anyone help me get thru this problem?
XDA Visitor said:
Hi,
I have rooted my device using framaroot and the using Mobile uncle too in updated the Recovery to Carliv and installed Mt657xRepartition_EN and changed partition to 3 GB. and when I tired booting into recovery mode its stuck at boot logo and not going into recovery. I see three option when i press volup + power.
recovery, fastboot and normal. When I click recovery I will get my boot logo back. When I select Fastboot nothing happens. If I select normal. its again boot logo.
I have taken NVRAM, IMEI backups. Now I am stuck as I cannot boot into recovery. Can anyone help me get thru this problem?
Click to expand...
Click to collapse
Ok ... seems that you bricked your device by repartitioning it.
Changing the partitions is always very risky.
I recommend to read this thread: [AUXUS Nuclea N2] All Things Root Thread.
Maybe you can flash back a stock firmware on fastboot.
For further questions, please register on xda and ask in the Q&A thread about your device.
Good luck !
Thread closed. Thanks you!
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
segrecurs said:
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
Click to expand...
Click to collapse
I'm a little bit confused on what you've posted but I will try to help. First I need a little bit more detail as did you Install a custom ROM but you were not succesfull and since then you have not been able to get into recovery or did you try to install a custom recovery and were unsuccessful?
If it is the latter then you will need to succesfully flash a recovery (Stock or Custom) in order to enter this section of the device, if it is the first then I would recommend attempting to reflash the devices stock firmware and starting from the beginning as it appears for both of these potential scenarios that the custom recovery is corrupted or is getting stuck when loading a particular section to work.
I didn't understood. Please guide me for my next step. Weather i should go for firmware or to install a cwm.
i tried to install custom recovery on my device
segrecurs said:
i tried to install custom recovery on my device
Click to expand...
Click to collapse
Are you able to boot normally into android OS..or is it just powering off automatically or is it happening when you try to go to recovery
If you can boot normally into android its not a softbrick but you might get one
Follow this thread http://forum.xda-developers.com/showthread.php?p=38110405#post38110405 if you want to install CLOCK WORK MOD RECOVERY using a computer if your phone doesn't boot...? No worries
DONT FORGET TO THANK THE HARDWORKERS
i m sorry to say but my phone just got hard bricked......now it stuck on the boot logo.....
help me
plzzzzzzzzz
NEEED help plzz..
i got my device into bootloop. i am using micromax a 89. i got stuck in boot loop and i cant enter in my stock recovery. is there any other way to get out of this. plz tell me
pls help my lenovo s860 can't finish flash using sp flash tool
the reason my phone lenovo s860 got bricked is because I've installed too many xposed module, I rebooted it right after the installation and then it went boot loop
So I tried to format it using Recovery Rom but it went lag and it stuck there, so I pressed the volume up and down and the power button again to escape from lag but after the format The phone is stuck at the recovery mode even though I pressed reboot or power off.
Now I tried to Flash it using Sp flash tool (latest version) but I forgot to press the "format and download" instead I pressed the "download" right away with its stock Rom (also I forgot to press the checksum in the download options) and the installation continued but it did not went 100% but it is stucked at 25% or 24%
Now my phone just displays The lenovo logo with "Dl tool failed! " below
Pls help me (sa mga pro dyan)
I cant get it to fastboot
I've flashed custom recovery but it makes the screen all black when I turn it on
I also flashed it in sp flash tool the old version 3.13 something and still only 25%
PLS PLS PLS HELP ME
It's worth trying Lenovo's Smart Assistant. This is an official PC suite that looks like it can flash the latest stock rom onto your phone for you. You'll find it here: http://lenovomobilesupport.lenovo.com/gb/en/products/Phones/S-Series/S860-Smartphone/downloads/DS101291
I personally don't have a Lenovo phone but I've used Sony's PC software to fix similar problems to yours before now.
This will mean that your phone won't be rooted but at least it will work and you can then root it and reinstall what you need.
Let me know if this helps!